Is available a Bluetooth Music Audio Receiver Adapter Ipod hifi  system compatible

Hi,
Is available a Bluetooth Music Audio Receiver Adapter compatible with the apple Ipod hifi system .
Thank you.

If I'm not wrong. you want some device can transmit wireless music to your audio system . What's you need is the Bluetooth receiver it act as a bridge  between your G5 and the audio system. just visit this websitehttp://www.portablehifi.com. You can find detailed reviews for best Bluetooth receivers there.

Similar Messages

  • IMessages + Belkin Bluetooth HD audio receiver

    I would LOVE to work iMessages with the Belkin Bluetooth HD audio receiver as an output. I can set it in the System Preferences > Sound as a main output, it works nice. However, I am unable to set the Bluetooth output in iMessages. Why?

    Hi,
    iChat 5 pic
    I am not booted into Mountain Lion or Mavericks at the moment to be able to compare but I am sure that Mountain Lion (Messages 7) and Mavericks (Messages 8) do not have this extra Bluetooth option.
    As I said it did require that it was set up "first" in System Preferences.
    I see you have SoundFlower (that has been an issue in the past for iChat Audio).
    Any chance your can use that to select the device ?
    The other thing to note that the iChat setting is for a Headset  and not just an optional Output device.
    It was set in Input as well as Output in System Preferences (and in iChat once it was set up).
    I am not sure why it does not show up though.
    9:19 pm      Saturday; June 14, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • File Receiver Adapter:Run Operating System COmmand after message Processig:

    Dear All,
    I have gone through this link
    [http://help.sap.com/saphelp_nw2004s/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm]
    But i have a problem.
    In the scenario which we have, File name is DYNAMICALLY GENERATED by a UDF
    I want to call the file at run time after message processing via Command Line and execute some os commands.
    But since the file name is Dynamic....How will i call the file at run time in Command Line:
    SYNTAX: %f(FileName)
    How will i specify the file name in the above syntax as the file name is Dynamic and not constatnt.
    Please Advice.
    Senthilprakash.

    Dear All,
    Yes just now i got the answer from this thread[OS command line script - Need help;
    Actually i have another doubt now
    In REVEIVER FILE ADAPTER:
    when we give Run Operating system Command After Message processing
    does the OS command get executed after the output file is placed in the Receiver folder/server or before its placed in the receiver folder?
    Regards,
    Senthilprakash.

  • Bluetooth music connectivity with Nissan Connect Navi system

    I can connect my iphone 5 by bluetooth for phone use, but it wont connect and allow music by bluetooth.
    Nissan say Apple wont allow data transfer on the navi system, and i must connect using the USB connection.
    Both Nissan and Apple tech support info advises that there is OK bluetooth compatability profiles A2DP and AVRCP.
    Going around in circles, any one got suggestions?

    Goodbrand, were you able to resolve your issue.
    I found the following, very interesting situation. If I connect any iPod via USB to the Qashqai AND connect the iPhone via Bluetooth (that's right, I am talking of two separate devices), the iPod will not resume playing once a call arrived on the iPhone.
    Kind regards
    Stefan

  • I would like to play music from my iphone 5s on a sound bar with an iphone 3 dock. Is there an adapter available that will play audio please?that will play audio please

    I would like to play music from my iphone 5s on a sound bar with an iphone 3 dock. Is there an adapter available that will play audio please?

    The genuine Apple adapter works for me, most cheap knockoffs do not support sound ,it is usually in the micro print at bottom of the ebay offerring
    It is pricey by comparison but it works and the knock offs usually don't pay the patent  licence fee hence they guess the technology that is in the lightning plug
    and charge a minimal price

  • Staying connected to Bluetooth (Belkin Bluetooth music receiver)

    I play my iPad's music over my kitchen speakers by sending the iPad's audio to a Belkin bluetooth music receiver, which is connected to the speakers.
    It all works well as long as the iPad stays within the Belkin's Bluetooth zone. The iPad can turn off, go to sleep etc. and when it wakes it is auto-connected to the Belkin BT receiver.
    However, as soon as I carry the iPad outside of the Belkin's BT zone, the connection is lost. When i return to the BT zone, the iPad and the Belkin receiver do not re-connect. To reestablish a connection, I need to go back into Settings/General/Bluetooth and click on the listed device (which is labelled as "Not connected"). That reconnects the iPad and Belkin receiver, and all is well until the next time I carry the iPad out of the Belkin's range.
    Any thoughts on how I can make this auto-connect when I return to the Belkin BT zone?
    Thanks in advance. Neil

    I have the same problem. Apparenly the Belkin BT music receiver doesn't support auto connect. Which is a massive shame.

  • My ipod touch 4th gen won't pair with bluetooth audio receiver?

    My ipod touch 4th gen won't pair with my aluratech istream universal bluetooth audio receiver.  It automatically paired the first time I used it, but now will not pair.  I removed the bluetooth receiver from the ipod because it kept saying make sure the receiver device is on and within range.  Now it doesn't even detect the bluetooth receiver.  Any ideas?

    Thank you!  We got the bluetooth receiver to use with our car stereo and our motorcycle stereo and were very frustrated when it quit working.  Thank you for helping me solve the problem!

  • I have a docking station to charge and play audio from my ipod touch 3rd gen.  Just bought a new ipod touch 5 th gen.  Is there a converter/ adapter available so I can continue to use my dock?

    I have a docking station to charge and play audio from my ipod touch 3rd gen.  Is there an adapter available for the ipod touch 5th gen so that I can keep using the old dock?

    Lightning  Adopters
    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • Can I use apple TV  to stream music to an audio receiver?

    Can I use apple TV to stream music to an audio receiver?

    As long as the music is in itunes and the ATV is connected to the receiver, yes.

  • Bluetooth audio receiver (Belkin) causes macbook built-in audio crash

    Hello. Sometime I use an Bluetooth audio receiver (some Belkin one) to transmit audio to the sound system of my house. When the macbook dont found that device, then a pop-up come sayin: "We didn't find your bluethoot audio" and there's only one option to choose and that is "Stop using bluetooth audio receiver". Then, the built-in audio of the macbook disappears since I dont know. I cant hear anything, but when you on the computer, the first sound comes out so, its not a hardware problem.... Someone can help me?
    Thank you all.

    I have to day more things about this issue. The problems started after I installed a NATIVE INSTRUMENTS plug-in called DRIVER. I haver searched every trace of it and erased from my HD.
    Another thing regarding the issue is that when I try to open the midi configuration of the mac it suddenly crashes.
    Any ideas before I take my laptop to the apple store?
    THANKS. Have a wonderful 2012!!

  • I am having a problem connecting my MacBook Pro (running 10.6.8) to a bluetooth music streaming devise (Arcam r-blink)

    Good evening all,
    When i am trying to connent my MBP to an Arcam R-blink (a rather expensive music streaming receiver) i am getting a 'Bluetooth audio failed'.
    The device is turned on and they are paired.  I just appears they don't like talking to each other.
    Eventually after several fustrating attempts they will finally connect - mainly after i have unpaired then repaired.
    Anyone else had this problem? Can it be fixed?
    Thanks,

    Here are a couple of User Tip Articles that may help you:
    https://discussions.apple.com/docs/DOC-3521
    https://discussions.apple.com/docs/DOC-3353
    On a personal note, I would seriously consider reinstalling Snow Leopard 10.6.  It still is the most stable and efficient Mac OS.
    Ciao.

  • E71 use bluetooth while audio jack,s connected

    is it possible to use bluetooth headset while audio jack,s connected?
    i listen a lot of internet radio on my e71 through car stereo by casette adapter(headphones enhancement).it's very arduous to plug off audio jack from the phone every time you want to answer a call and talk by bluetooth!
    even if bluetooth heaset is connected i can't use him till i plug off audio jack.
    if i answer a call when jack is connected i can hear the voice throough car speakers and i have to use phone mic.
    is there any solution ?
    please help!

    I'm also having this problem. So are over 50 people to date, and I'm sure we're just the only ones who are active. http://androidforums.com/samsung-galaxy-s3/576056-can-not-use-bluetooth-when-audio-jack-plugged.html
    Can this be fixed? This is extremely dangerous. I use my phone as an mp3 player and connect it through the audio jack in my car, and also want to use my bluetooth headset to make and receive calls. Instead the call comes through my speakers and there is no microphone, leaving me scrambling to unplug my audio cable while driving.
    People say that the original firmware didn't have this problem. Samsung says it's Verizon, Verizon says its Samsung, I dont care who is liable as long as someone fixes it!
    Thanks

  • Galaxy S3 doesn't connect to bluetooth when audio jack is in use

    Here is my issue with my Galaxy S3.  My car has buil in bluetooth hands free.  The car stereo has an AUX input for music.  If I have a cable connecting the phone to the AUX jack for music I can not send/receive calls via the bluetooth.
    I was able to do this seamlessly with my old Droid.  The music would mute and I could answer the phone with the steering wheel controls.
    now I need to unhook the wire from the phones audio jack.  I see this as more than inconvienence but an actual safety issue.  Unpluging and repluging in wires while driving defeats the point of a "handsfree".
    Is anyone else having the same issue?  have you found a work around?

    I'm also having this problem. So are over 50 people to date, and I'm sure we're just the only ones who are active. http://androidforums.com/samsung-galaxy-s3/576056-can-not-use-bluetooth-when-audio-jack-plugged.html
    Can this be fixed? This is extremely dangerous. I use my phone as an mp3 player and connect it through the audio jack in my car, and also want to use my bluetooth headset to make and receive calls. Instead the call comes through my speakers and there is no microphone, leaving me scrambling to unplug my audio cable while driving.
    People say that the original firmware didn't have this problem. Samsung says it's Verizon, Verizon says its Samsung, I dont care who is liable as long as someone fixes it!
    Thanks

  • Incoming calls not using Bluetooth / Music tracks repeating

    I've been having a problematic issue with Bluetooth since upgrading to iOS 7. I have my iPhone 5 paired with my 2013 Hyundai Elantra's Bluetooth system.
    Outbound calls use Bluetooth just fine, as does Siri, but any incoming calls all use my iPhone's headset by default. I have to manually switch the phone's output back to my car's bluetooth in order to talk using my car's hands-free system... which really defeats the purpose of hands-free.
    I'll note that this is happening both when my iPhone is plugged in via USB and listening to music on the car's stereo, as well as when the iPhone is simply idle in my pocket. I have not tested what happens when the car is playing my iPhone's music via Bluetooth (the audio quality is sub-par to a direct connection and doesn't display the artist/track/album on the console when playing via Bluetooth - ergo I rarely use it)
    Secondly, I am having another issue, this time with playing music. I don't believe it's related to the above Bluetooth issue, but it may be related to my car.
    Like I said above, I often use my Elanta's USB port to directly plug in my iPhone so I can a) listen to music on the car's stereo and b) skip tracks with the wheel-mounted controls. This all worked flawlessly with iOS 6.
    Now, if I skip a track with my car's controls, the Music app will repeat that next track... over and over. When the song is completed, it will attempt to move on to the next song, then immediately backtrack and start playing the previous song again (you can tell so by watching the Music app. The album art will swipe over, then quickly swipe back). I have to manually skip forward to play a new song... Highly irritating.
    I'll also note that skipping songs via the wheel-mounted controls is considerably slower than it was with iOS 6. It's definitely a couple seconds after I press a button before the next song starts to play. It used to be near-immediate.
    Anyone else having either of these issues? Hopefully it's something Apple picks up on and fixes soon!

    Don't know if you got this yet, but I came here looking for answer. Since I just found one, figured I'd pass it on for others:
    You have to set your phone's incoming calls to "headset" under accessibility. (Silly, I know, considering, if you hook up a bluetooth, it should automatically default there, but no ...) This walks you through:
    http://www.imore.com/how-set-default-call-answer-mode-iphone

  • How to attach Excel file in Mail Receiver Adapter?

    Hello Experts,
    In R/3 coding I have Internal Table data available for which i have to generate an Alert mail with Excel file attachment.
    This is the scenario of Proxy sender to Mail Receiver. but I don't know how to convert the Internal Table data into Alert mail excel File attachment.
    Please suggest me.
    Regards,
    Jagesh

    Hi Santhosh,
    Thanks for your suggestion.
    But without using XSLT mapping also, I have generated the Excel File attachment.
    Throgh R/3 coding I am passing following.
    G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From Mail Address.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = TO Mail Address.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-SUBJECT = 'Test Alert mail'.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-DATE = SY-DATUM.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE =   'text/plain;name="CSV_data.csv"'.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = 'Testing1,Testing2,Testing3'.
          G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_DISPOSITION = 'attachment'.
    And in the Mail Receiver Adapter i have configured as following.
    Use Mail package and Keep Attachment both options are selectd.
    So I am getting the data in different columns in the excel file But How to set the Next ROW in Excel file?
    I thnk i am missing something in CONTENT value.
    Regards
    Jagesh

Maybe you are looking for