Is Bento the best way to view my FileMaker data?

Is Bento the best way to view my Mac FileMaker data on iPhone?
Any tips?

check out the GROUP attribute of cfoutput tag. look in the
docs.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Similar Messages

What is the best way to kill/stop a data load?

Hi.
What is the best way to kill/stop a data load?
I have a data load from my QA R/3 system that is extracting 115.000.000+ records. The problem is that the selection in the function module used in the data source does not work, and the problem was not detected because of the nature of the data on the development system.
I could kill processes owned by my background user (on both R/3 and BW) but I risk killing other loads, and sometimes the job seems to restart if I just try to kill processes. If I remove transactional RFCs in SM58 the load does not terminate; I only skip one or more datapackages. I have also tried to change the QM-status in the monitor to red, but that does not stop the load either...
So isn't there a nice fool-proof way of stopping a dataload?
Best regards,
Christian Frier

Hi,
There r 2 ways to kill the job.
One is using transation RSMO locate the job and display the status tab double click on the yellow light that is shown on the line total, a pop will come 'set overall status ' is displayed select the desired status that is red and save it. Then return to the monitor page and select the header tab double ckick on the data target right click and then goto 'manage',there should be request sitting there probably with yellow lights , highlight the line with the faulty request click the delete button then click refresh button.
Second is goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
hope it is clear.
Regards-
Siddhu

What is the best way to view images on an External Hard Drive?

I have a Macbook Pro with the latest OS X Yosemite
Can anyone tell me the best way to easily view thumbnail images on the external hard drive because at present I am having to open each folder and would ideally like to see all thumbnail images in similarity to what Adobe Bridge has! (I have not got Adobe Bridge).
Any pointers or advice please?
Ta

I backup regularly to data DVD's without a problem.

What is the Best way To Copy and paste data from 1 book to another

I have 18 sheets in 5 different books that I want to extract data from specific cells. What is the best way to do this? Example: 1 sheet is called Numbers E-O1 data in 13:WXYZ. The data updates and moves up 1 row every time I enter
a new number. So let's say I enter the number 12. Through a lot of calculations the output goes in 13:WXYZ. To what I call a counter which is a 4 digit number. Anyways, how can I send that 4 digit number to a totally different sheet? To bullet
what I'm talking about
data in cells Row 13:WXYZ in book called Numbers sheet E-O1
send data to book called "Vortex Numbers" Sheet E-O row 2001:CDEF
What formula or Macro can I use to make this work?
thank you!

Hello Larbec,
Syntax:
'[BookName]SheetName'!Range
Enter in cell 2001:CDEF:
='[Numbers]E-O1'!13:WXYZ
This assumes that the file is open in Excel. Otherwise you need to add the path:
'ThePath[BookName]SheetName'!Range
Best regards George

What is the best way to stack DAQ aquired data in labview?

I'm developing an application to work with an M-series daq card and labview 8.5 to output a signal and then record on 8 differential inputs for a short period of time (~10 ms). I need to stack my data, however, because the incoming signal will be very, very small, even after amplification. So basically i'm running a slightly modified version of the multifunction Synch AI-AO.vi (included with the install of daqmx). What is the best way for me to rerun this vi a set number of times and add new data directly to the old data (not cat-ing or anything, like |sample 1 of run 1| + |sample 1 of run 2| = stacked stample 1).
A slightly modified version of the mutlifunction synch AI-AO.vi is attached.
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏143 KB

Hi LSU,
see attachment on how to "stack" several measurements. I simply add the waveforms and use a shift register to keep the last iterations value.
Writing to files in each iteration is extremly CPU consuming - especially with express vis. Using for loops for just one iteration is "senseless". You could enable the conditional terminal of the for loop to realize your stop feature.
For your message 4:
Have you ever tried all the things you asked for? Sometimes it's easiest to just try&error
And for the "n=n+x" question: It really helps to take the free online courses offered by NI!
Message Edited by GerdW on 11-11-2009 06:27 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏128 KB

What's the best way to handle all my data?

I have a black box system that connects directly to a PC and sends 60 words of data at 10Hz (worse case scenario). The black box continuously transmits these words, which contain a large amount of data that is continuously updated from up to 50 participants (again worst case scenario)
i.e. 60words * 16bits * 10Hz * 50participants = 480Kbps. All of this is via a UDP Ethernet connection.
I have LabVIEW reading the data without any problem. I now want to manipulate this data and then distribute it to other PCs on a network via TCP/IP.
My question is what is the best way of storing my data locally on the interface PC so that I can then have clients request the information they require via TCP/IP. Each message that comes in via the Ethernet will relate to one of the participants, so I need to be able to check if I already have data about that participant - if I do then I can just update it, if I don't I need to create a record for the participant, and if I havn't heard from one for a while I will need to delete it. I don't want to create unnecessary network traffic. I also want to avoid global variables if possible - especially considering that I may have up to 3000 variables to play with.
I'm not after a solution, just some ideas about how to tackle this problem... I thought I could perhaps create a database and have labview update a table with the data, adding a record for each participant. Alternatively is there a better way of storing all the data in memory besides global variables?
Thanks in advance.

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What's the best way to load FieldPoint measurement data into PI System?

I am finding the best way to load data collected by NI Field Point (FP2220) into the PI system of our power plant.
I found pieces of information about FieldPoint OPC server in NI.com. Not sure if it comes with Field Point Hardware, sold by NI as a separate product or it is actually non-standard NI products. Anyway, I know that there exists a thing called FieldPoint OPC server.
The PI system I mentioned has a OPC client software called PI-OPC interface. It is able to communicate with standard OPC DA server. If that FieldPoint OPC server is a standard OPC DA server provide data collected by Field Point complying to OPC standard, than that's perfect.
Anyone familar with PI system and NI product, please help if the above is going to work or if there is a better way to put Fieldpoint data into PI.

Hi Eric,
This information really helpful, thanks. Regarding to the NI OPC server for NI FieldPoint, I have the other query.
In my setup, there are two sets of FieldPoint located in two different locations on my ethernet network. They are going to be controlled by a single PC. If I am going to connect both my FieldPoint sets with OPC standard, how many NI OPC server for FieldPoint do I need to connect to? Are there two NI OPC servers each serves one FieldPoint set? Or there is only NI OPC server which serves both FieldPoint sets?
I am concerning about the number of NI OPC server instances running, because the number of OPC client license I need to purchase depends on how many OPC server I need to connect to. If one NI OPC server serves both my FieldPoint sets, I only need to buy one OPC client license; otherwise, I need to purchase two. In the future, I am going to have another two sets of FieldPoint sets, so the answer of my query determines how many OPC clients I need to purchase eventually - One or four. A huge price difference.
Looking forward to your reply.
Regards,
Roger

The best way to move 2TB of data from Win to Mac

Hello,
what is the best way me to move 2TB (multiple files) data from windows to Mac?
I think that over the LAN, even using crossover cable connecting 1GB NICs would be painfully long. (Windows disk is quite fragmented)
If I put windows (ntfs partitioned) disc to one of Mac Pro bays, will Mac allows me to access the date on it?
if I take the disk of the windows PC and put it to [eSATA Hard Drive docking solution|http://eshop.macsales.com/item/Newer%20Technology/FWU2ES2HDK>, will Mac be able to mount it and let me copy the files from the windows disk?
Any other ways of moving 2TB data from windows to Mac?

Being able to read, also means, being able to mount said drive volumes.
Windows 7 64-bit (Pro version if you have dual processor, which at this time really isn't needed that much) would work fine too.
There are programs, some or most have their own limitations, allow Windows to read and write to Mac HFS+ file system volumes; or the reverse and allow Mac OS to read/write NTFS. None are what I call perfect.
Becuase of limitations in older file systems and partitioning, Apple and Microsoft have implemented support for volumes larger than 2TB with GPT to replace aging Master Boot Record (Windows 7 even can't run off MBR with volumes larger than 1.9TB). Mac Pro uses GPT and can boot from very large volumes.
eSATA docking stations. Depends on the interface and controller card if any, whether using SATA PCIe for one thing (you would not ever want to use USB though maybe USB3 PCIe if you can find one), therefore, use internal drive bays. Also, more concern with the drive temperature in one, they can get very warm in my experience.
But maybe you do, maybe you don't, actually need to move data, maybe just have it read-only accessible.
Putting the drive in a FW800 case would probably make the most sense, both now and for further use for booting (backup clones are handy and allowed) or for backup with Mac TimeMachine.
But I would install Windows 7 on your Mac Pro. I use GPT for data drives in Windows and to read from in Mac OS environment.

What is the best way to view Batman and Love Boat to see their transitions?

David Brewer, you mentioned Batman and Love Boat as providing bad examples of transitions, IYHO. How do you think I could most easily see them in this year? Netflix?
Other viewers - shy off from responding to this. This is for David Brewer.
LM

oh, i cannot not respond to this one.
"batman", the tv series? still, in my mind, one of the best produced shows ever. the "pow" cartoon box transitions were awesome! in many ways, i felt "sin city" drew a lot from the batman series. i have a batman movie in my dvd collection. i'm sure you can find dvds of the series. "google" springs to mind.
"the love boat" on the other hand, well, i have no idea where you'd find it and it's probably good that it's not resurrected.

What is the best way to load and convert data from a flat file?

Hi,
I want to load data from a flat file, convert dates, numbers and some fields with custom logic (e.g. 0,1 into N,Y) to the correct format.
The rows where all to_number, to_date and custom conversions succeed should go into table STG_OK. If some conversion fails (due to an illegal format in the flat file), those rows (where the conversion raises some exception) should go into table STG_ERR.
What is the best and easiest way to archive this?
Thanks,
Carsten.

Hi,
thanks for your answers so far!
I gave them a thought and came up with two different alternatives:
Alternative 1
I load the data from the flat file into a staging table using sqlldr. I convert the data to the target format using sqlldr expressions.
The columns of the staging table have the target format (date, number).
The rows that cannot be loaded go into a bad file. I manually load the data from the bad file (without any conversion) into the error table.
Alternative 2
The columns of the staging table are all of type varchar2 regardless of the target format.
I define data rules for all columns that require a later conversion.
I load the data from the flat file into the staging table using external table or sqlldr without any data conversion.
The rows that cannot be loaded go automatically into the error table.
When I read the data from the staging table, I can safely convert it since it is already checked by the rules.
What I dislike in alternative 1 is that I manually have to create a second file and a second mapping (ok, I can automate this using OMB*Plus).
Further, I would prefer using expressions in the mapping for converting the data.
What I dislike in alternative 2 is that I have to create a data rule and a conversion expression and then keep the data rule and the conversion expression in sync (in case of changes of the file format).
I also would prefer to have the data in the staging table in the target format. Well, I might load it into a second staging table with columns having the target format. But that's another mapping and a lot of i/o.
As far as I know I need the data quality option for using data rules, is that true?
Is there another alternative without any of these drawbacks?
Otherwise I think I will go for alternative 1.
Thanks,
Carsten.

What is the best way to put LabVIEW DSC data into an Oracle database?

I have been collecting data using LabVIEW DSC 7.0 for several years and have always accessed the data from the Citadel database via the Historical Data Viewer. I would now like to begin putting this data into an Oracle database. My company stores all their data in Oracle and it would provide me all the benefits of their existing infrastructure such as automated backups, data mining tools, etc.
My initial thought is to use "Read Trace.vi" in LabVIEW to pull historical data from the citadel database at regular intervals (e.g. 1 minute) and insert this data into Oracle via ODBC. In this way, I do not need to track the value changes in order to know when to write to Oracle. I also considered replicating the citadel database using some other method, but I recall that the tables used by citadel are somewhat complicated. I only need a simple table with columns for channel, timestamp, and data. The "Read Trace.vi" will provide me data in this format.
I do not need to update the Oracle database in real time, a few minute delay is acceptable. If anyone has a better idea or additional insight please let me know. Thanks.

In terms of connectivity, you want to use ADO, not ODBC. Beyond that, it all depends on the structure of the data and what you are going to want to do with it. This is a very big question that you need to be getting some in-depth assistance.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

What is the best way to extract/consume HR data to and from Peoplesoft?

I have to do integration between Peoplesoft and Oracle ERP to send HR data from Peoplesoft to Oracle HRMS. I will use Oracle Fusion Middleware for building the interface. I don't have much experience in working with Peoplesoft tools, like PeopleTool, App Engine, Integration Broker, Component Interface and Oracle adapter for Peoplesoft. Can somebody please let me know what is the most popular or recommended or best way to extract HR data from Peoplesoft.
The second interface will consume some HR data from Oracle. Once again I need to know different ways to insert data into Peoplesoft.
I appreciate if you can share your experience for the above two scenarios.

If you plan on buying a apple laptop you have two options. You can use time machine or pull the data off of it directly and put it onto the external. I advise the second choice. This way you do not have stuff that you dont need filling up the space on your new drive. Get your applications, music, documents, photos, videos and perhaps downloads and desktop; Put all of these on your external. And then reinstall osx onto your drive.
*** If buying a windows machine next check the format of the drive in disk utility. You will need a program called Paragon NTFS to format the drive window compatibility. You have to pay for the free version but can download a trail version for free.
http://www.paragon-software.com/home/ntfs-mac/
Did i leave anything unanswered?

Whats the best way to archive live audio data while transmitting?

I am trying to archive audio conversations and am wondering what the ebst way to do it is. I doubt recording then playing it back is good since there will be a lag between data. I am thinking of creating a datasink and record while playing using datasource. anyone can help me out? sample codes? thanks!

well if I made it non-static, wouldn't I have to create a new object of that class in each class I want to use it in?
for example, that class that populates the database must parse a file to create the database.
RODMFileParser file = new RODMFileParser();
file.parseFile("QAGENT");So inside each class I would have to do this wouldn't I? if I made it public static, wouldn't I only have to read to the disk once?
Putting it to a worst case say, 100 classes need this database, that means I would have to make 100 accesses to the disk woulnd't it?
And if it was public static, it would jsut return a copy of the database that was only read from the disk once or am I misunderstanding how it works?

What is the best way to view FLV files?

I remember installing a plug-in for QuickTime that would allow FLV movies to be viewed. (How do you know what plug-ins you have anyway?)
With QuickTime, the longer the FLV movie is, the more the audio and video go out of sync.
Any opinions on standalone FLV players that are not QuickTime-based?

You need Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

I lost flip4mac when I installed mavericks. What is the best way to view windows media?

I can't view windows media since I installed mavericks. I found out that flip4mac didn't install with mavericks. Is there an apple app to replace flip4mac or should I just get another flip4mac. The icon is still there but none of the software seems to be present.

Try VLC media player it seems to play almost any codec.
https://www.macupdate.com/app/mac/5758/vlc-media-player

Is Bento the best way to view my FileMaker data?

Similar Messages

Maybe you are looking for