Is "Bill Of Lading" is for Shipment or Delivery ?

Can any one tell me
Is "Bill Of Lading" is for Shipment or Delivery ?

u have a field called bolnr in likp ...
the concept is a bill of lading is a number/description
under which a delivery can be shipped
say there are 10 deliveries with bill of lading AXWE12345
now under this bill of lading number (AXWE12345 ) we can assign the all the 10 deliveries to be shipped ..
generally a Bill of lading is maintained for reference and it is used in the ship label ..
each ship label contains bill of lading number with the customer po reference number ship to party , box id number ,, dest code etc ,,
now in our example we have taken 10 deliveries under a single bill of lading so now all the ship labels will carry the same bill of lading number ,,
this stuff is actually done before the PGI.
hope this helps ,
Regards,
Vijay.

Similar Messages

  • Change Bill-of-lading&package no in Outbound Delivery using BAPI or any FM

    Dear ABAP Gurus,
    How to change Bill of Lading(BOLNR) and Number of Packages(ANZPK) in Outbound Delivery using BAPI or some other Function MOdule.( BDC is not required for this).
    Regards,
    Rajesh

    MOVE 'BAPE_VBAP' TO lwa_extension-structure.
          lwa_bape_vbap-vbeln = lwa_final-vbeln.
          lwa_bape_vbap-posnr = lv_posnr.
          MOVE lwa_final-yyslotid TO  lwa_bape_vbap-yy_slotid.
          MOVE lwa_bape_vbap TO lwa_extension-valuepart1.
          APPEND  lwa_extension TO  lt_extension.
          CLEAR  lwa_extension.

  • Common Table required for Shipment and Delivery

    Hi Guys,
                 What is the Table where I can give input as Shipment Number and get all the deliveries for that Shipment.
    Thanks,
    Prasad.

    HI
    YOU CAN GET IT FROM TABLE VTTP   by giving input as shipment no. u will get  delivery no. from this table and then from table LIPS by using this delivey no. u can get all delivery details.
    and in addition to that u can also refer link: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e944e133-0b01-0010-caa2-be2cb240f657
    regards
    rahul
    Edited by: RAHUL SHARMA on Feb 20, 2009 8:11 AM

  • Bill of Lading : Forwarding Agent/Carrier data

    Hello,
    On Bill of Lading report no data are displayed in 'Forwarding Agent/Carrier' section.
    Which kind of data do I have to setup to displayed data in this section ?

    This might helps
    You can create a Bill of Lading category for each delivery leg's Ship
    Method/Carrier you use or define one Bill of Lading category for all Ship
    Methods/Carriers. The advantage to having a different Bill of Lading
    sequence for each carrier is that you could easily identify the carrier
    by looking at the Bill of Lading number.
    In addition to creating document categories by Ship Method/Carrier, you
    can tie a category to a specific delivery's pick-up location. This
    provides the opportunity to have a different BOL sequence for the same
    carrier departing from a different location. An example of this would be:
    For a Viking Freight shipment departing from warehouse 1 the Bill of
    Lading number could look like this: WH1-Viking-12345
    For a Viking Freight shipment departing from warehouse 2 the Bill of
    Lading number could look like this: WH2-Viking-54321

  • Pre-Order but still "Prepared for Shipment"?

    I noticed a lot of people getting their shipments early.
    I ordered mine around 7pm on 6/15. I barely made the cutoff for the 6/24 shipment. My order still says, "Prepared for Shipment" with delivery on 6/24.
    Anyone else in the same boat? I hope they ship it soon...doesn't it come from like China? If they don't ship it soon, what are the chances it will actually come on the 24th?

    I ordered mine at 7:30 in Utah and received an email this morning saying I would get mine tomorrow. According to the Fedex site, it is in the sort center in my state. I am so excited. Have faith and hope that everything will work out fine. As the song goes, "Every little thing's gonna be alright.".

  • Can create twice billing document for the same delivery in STO

    Hi experts,
    I donot have problems in Standard Sales order when I create billing doc via VF01. When I try to create another billing doc in VF01 for the same delivery it says error, as the item is already invoiced.
    This is correct. 
    But while creating invoice for STO order, system allows me to create more than 1 billing document for the same delivery. If we accidentally or purposefully create it allows to create many.
    Could you let me know where in SPRO (IMG) I can control this?
    Thanks,
    Pri

    Hi
    STO billing if it is intercompany STO followed by IV billing type you can create only once
    No special settings reqd to achieve this as you bill  (IV billing type) the delivery the first time, the delivery status gets completed
    If Intracompany, the billing type is proforma invoice F8  and this can be created as many times as you wish as proforma doesnot update accounting
    if your issue is this
    Even this also if you want to restrict only once then try with copying requirenments 311 at item level (i hope standard item category NLN is used) in VTFL between header NL to F8
    Regards
    Raja

  • Bill of Lading for Shipment

    Hi All,
    Is there any smartform for Bill of Lading for shipment. if the shipment had four deliveries in two stages two deliveries to each ship to parties. i need the print the first two deliveries and first ship to in the first page and second two deliveries and the second ship to in the second page.
    Points are assured for the useful answers
    Thanks in advance
    Sahiti Reddy.

    Hi Sahiti
    As far as i know there is no specific standard smart form for bill  of lading
    but you can use the script for delivery note and you can make the changes accordingly.
    form name ---> RVDELNOTE
    output type ---> LD00.
    program name ---> RVADDNO1.

  • Shipment and Bill of lading

    I have a problem with few Export shipments, where the shipments have already started and moving and stuck at the border before they have been updated in SAP. Bill of lading shows different from few sap orders and few items are in scheduled status.
    How to go about it, plz advice.
    Regards!

    Hi, thanks for your answer but it is not what I was looking for...I would not post this question in here when I had to ask this to an abap coder
    Maybe someone else can clarify?
    I almost have an answer to my own question so I'll continue my research and also hoping someone can clarify what I stated above.
    Points will be rewarded when someone gives the correct answer.

  • Output for bill of lading

    Dear friends,
                          From which doc bill of lading is printed ? Delivery or shipment ? What is the standard output type available for bill of lading ?
    Regards
    Mahesh.

    If you are using shipments, the Bill of Lading from Shipment document gets the preference.
    You can use SAP standard output type CMR1 - bill of lading.
    ALTR - General ship doc shall also be used in shipment output

  • Updating Bill of Lading on Shipment

    My current project has a requirement for updating the Bill of Lading on shipment save (Bill of Lading has to be updated whenever a shipment is added/saved). Please let me know how an we enhance it to meet my client's requirement?
    Regards,
    Tom Francis

    Hi,
    you can work with the user-exit MV50AFZZ
    Regards
    Nicole

  • Shipment-Bill of Lading

    Dear SAP Gurus,
    1. where we will enter the Billing of lading number in shipmet document. say there are 10 delievries in that shipment. so one bill of lading number will exits for that deliveries. how retrive the deliveries based on the bill of lading number.
    2. How to the partial shipment. say i have a delivery , i want to send the partail item to customet on today. and remaing item after two are three days. how to map this one.
    Thanks in advance
    Regards,
    Ramakrishna Reddy

    Dear Ramakrishna Reddy
    1)  At Header level in delivery, there is a tab "Shipment".  Go to that and you can see a field "BillOfLad".  You can maintain the Bills of Lading details here.
    2)  Do PGI for whatever quantity you would like to despatch.
    thanks
    G. Lakshmipathi

  • Driver program for BIll of lading smartform

    Hi all,
    Can you please provide me the standard driver program for bill of lading smartform.
    or for purchase order smartform.
    Thanks and regards,
    Rajeev

    Hi,
      For Purchase Order - SAPFM06P.
    And for future info,
      If you Know the Application and Output Type - Then it is very easy to know the Smartform or the Script Used.
    1.Go to NACE and Check.
      For Ex: PO belong to APP type EF, So click on EF and then click on "Output Type " button.
                  Then all the output types will be displayed.Then select the required and Click on "Processing Functions". Then you can see the Configuration details done for this ouput type like which smartform, which subroutine.
    2.Also, You can check the TNAPR table entries by entring the below information
    Output Type, Message transmission medium, Application.
    Thanks & Regards,
    Vamsi.

  • Match Bill Of Lading With invoice for payment

    HI All,
    In my current project, client is using 3PL (third party logistics) for transportation of goods from one plant to another plant. We are creating Bill of Lading but not using Transportation component of LE. Client has a requirement to use the bill of lading as a cross reference when posting invoices and making payments within SAP system. Can anybody please advice on how we can get this requirement configured in SAP?
    Any help is highly appreciated.
    Regards,
    Shamsul

    Thanks Kumar. We have BOL field in MIGO and we have allocation available to BOL in MIRO also. I'll test the scenario and will update you on that.
    Thanks for your time.
    Regards,
    KHAN

  • Standard samrtforms and print program for  Bill of Lading in delivery

    Is there a standard smartform  and print program for  Bill of Lading for delivery?

    Hi
    Check this:
    Print Program: RLE_DELNOTE.
    Smartform:   LE_SHP_DELNOTE.
    Regards,
    Vishwa.

  • Preconfigured smart form for Bill of Lading

    Hi all,
    I am working on smart form to prepare a bill of lading. But I cant find a standard smartform for that. Only SAP script is there. But to import from script means only layout will be imported nothing else.
    Pls tell me any standard bill of lading SF.
    I am eagerly waiting.
    With regards,
      Abir.

    Hi Abir,
       There is no standard smartform for bill of lading.
    YOu need to migrate from the standard sapscript to smartform.
    Refer this link to know how to do this.
    The specified item was not found.
    Regards,
    Ravi

Maybe you are looking for