Is boot camp still available from apple to buy?

Does anyone have a link to a place on apples website where I can buy boot camp? If its still available?

It's on every version of OS X since Leopard. Of course a different version with each OS X upgrade.

Similar Messages

Where is the link for LogicPro loops from Apple? Where did it go? Are loops still available from Apple?

Where is the link for Logic Pro loops from Apple? Where did it go? Are sound loops still available from Apple? The web site says they have thousands of sounds available but I cannot find the link. IT worked in the past. IS this still available?

In Logic Pro, on the top menu bar, click LOGIC PRO/DOWNLOAD ADDITIONAL CONTENT

I just upgraded from IPhoto7 to 9.5. Now I can't open iPhoto without a downloaded tool to bridge the gap bewteen versions. I downloaded the tool and I still get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple."

I had to upgrade to Mavericks to send off the iCanendars I made in iPhoto. Then I had to upgrade my IPhoto from 7 to 9.5. Now when I go to open iPhoto I get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple." Well, I installed the Upgrader, but I still get the message and can't open iPhoto. I have tried restarting the computer, but that didn't help. How do I get the computer to recognize the Upgrader?

You may get more replies in the iPhoto forum.
https://discussions.apple.com/community/ilife/iphoto

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Can't open iPhoto "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." Doesn't work...

I've tried to open my iPhoto and a message box opens up and reads "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." I update this and this message continues to pop up. I've even tried to rebuild it, but no matter what I do the same message appears and iPhoto still wpn't open. Can somebody please help me?!

i'm having the same problem with my iMac (Mac OS X 10.7.5) . i haven't really made any updates to it and yesterday when i tried to access the iPhoto library of my MBP (from my iMac) is when problems started. The iPhoto on the iMac initially said I need to install the recent version of the iPhoto. Since I can't find a 9.0 download, I went to buy the iPhoto on the App store.
When I tried to install iPhoto (version 9.4.3) to the iMac, I got this message:
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto 5 or earlier, so you can upgrade them with the current version of iPhoto. You can download the tool here.
Note: If your library is from iPhoto 6 or later, this tool is not required."
I then installed the iPhone Library Upgrader, but I got the same prompt:
'You can't open your current photo library using this version of the iPhoto. You have made changes to your library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
I guess this takes me back to square one? I am inclined to buy the iLife on eBay with the iPhoto 9.0 version, but needed to know if this is the case before I unfortunately bite the bullet.

Printer driver for workforce 645 was updated yesterday and printer no longer works, driver is no longer available from apple or epson.l

When i go to the epson website it says the printer driver is available from apple. When i go to the printer selection it sees the printer but says that apple has no drivers for this printer. In the updates section of the app store it shows that the printer driver was update yesterday.

If you're sure you tried all of these steps and the issue persists, contact Apple technical support
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

''Attaboyslim wrote:''
I am locked into firefox.
If nothing happens when you press the F11 key, check if you have the same problem in Safe Mode.
* [[Troubleshoot Firefox issues using Safe Mode]]
''Attaboyslim wrote:''
I'd like the old browser please.
* [[How to make the new Firefox look like the old Firefox]]

Photosmart C5180 MAC OSX 10.9 Setup - Software for this printer isn't available from Apple.

Can't add printer with OSX 10.9 - asking to choose a Driver with message Software for this printer isn't available from Apple. Had been able to print with no problem until this week.

Hi,
Please check the printers supported list and try the following fix:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Driver software is not available from Apple

Was using an HP LaserJet 1020 without any problems until last week, when it just gave out and it shows the following error every time: "driver software is not available from Apple". Have tried to install the latest drivers but it won't allow it with the same error.
Also tried following these instructions http://blog.jayway.com/2010/04/08/hp-laserjet-1020-in-snow-leopard/ but it gets stuck on the third step. The driver list can't be opened and it reads "driver software is not available from Apple" again.
Any suggestions?

From what I can tell from online research, HP never claimed the 1020 printer series was compatible with Macs or has ever developed any OS X drivers for them. For instance, from the "Specifications" tab of this product info page:
Because of that, I'm kind of amazed that you ever got your 1020 to work with any version of OS X, unless some sort of hack or third party driver was involved. If so, you might want to check with the originator of that workaround to see if there are any new developments that would get it working again.

Upgrading to Boot Camp 5.0 from 4.1: Would it require a re-install of Windows (Win7 SP1)?

I have a Late 2012 Mac Mini (OS X 10.8.3) with Boot Camp 4.1 and Windows 7 SP1 installed. I mainly work on Win7 and would like to continue doing so. My question is: Would upgrading to Boot Camp 5.0 require me to re-install my Win7 or does it work like a simple update? I certainly do not want to waste any time having to re-install my copy of Windows and all my content as it is working fine, but would like to install the latest Boot Camp drivers if it is no problem doing so.

Thanks mate, update to Boot Camp 5.0 done! Had a issue at first which didn't let me run the update, but this was resolved by downloading (from Apple's support website) and re-installing my (now previous) BC4.1 drivers again. Think it has something to do with the previous BootCamp.msi file that allows the BC4.1 drivers to be uninstalled first before updating to BC5.0. Got that tip from a diffrent question thread on the support website. Anyway, thereafter running the BC5.0 update was no problem. Takes a little while for everything to get fully updated on the next restart, but all good. Cheers.

Uninstalling Windows via Boot Camp, still partitioning after roughly 1 hour

Hi,
This is my first post, but I'm a long time searcher. I usually find what I'm looking for, but in this case I thought best to ask. I hope I follow the correct etiquette!
So today I thought I would have a go at installing Windows XP via Boot Camp on my MacBook Pro. To cut a long story short, I completely messed it up because I (stupidly) read SP1 instead of SP2 on the CD and essentially it didn't install anything from the boot CD's -- as you would expect.
So after a quick panic I got back running in OS, and have now just tried to uninstall windows using Boot Camp, following the correct instructions, and after around an hour now it's status is still reading: Partitioning disk.....
Is this to be expected, or is this wrong? Initially I only partitioned 32Gb for Windows as I didn't really want to do anything with it.
I have done a few searches and got some mixed answers - ranging from it should be instantaneous, to it could take an hour.
What should I do next?
Thanks in advance.

Well......First, I should say that although I've used Macs for many years I'm not an expert by any means. So, take my advice with caution.
In some ways it seems like, without a full backup, you are sort of between a rock and a hard place =-( I'm not sure what will happen if you force quit the Boot Camp repartitioning. It might be o.k. and it might bugger up your hard drive and require you to reinstall everything. I'm not sure what effect "ejecting" the Windows partition would have.
I guess at some point you're just going to have to do something. When I get to a point where I am in a situation like you are I search the Internet for as much information as I can get. If I can't find a specific answer to my problem at least I usually get some idea of what to try. Then I just go ahead and start trying things. When you get into that situation it is much less stressful if you have a complete backup. (It's really worth spending the money to buy an external hard drive and start using Time Machine to make a backup.)
I know that my answer is not much help. Sorry about that. Maybe someone else will chime in with some more useful information. If they don't I guess that you're just going to have to take a plunge =-(

Boot Camp Not Working From Windows Control Panel

Hi,
When I click on the 'Boot Camp' icon in the Windows Control Panel I get the usual warning from UAC. When I select 'Allow' I get an error message along the lines that "I don't have permission to access the startup disk" & the app will not run.
I have tried running it as administrator but the result is the same.
Does anyone know how to rectify this so that I can get this utility working correctly again?
Thanks

On the disk Management I tried to set the disk with the OSX partition as active and restarted, and ended up having Missing Operating System error.
Fortunately I managed to solve that problem but still I am unable to switch back to Mac.
Help is needed and much appreciated

Boot Camp Utility Missing From Windows 7

Hi all,
I'm running an 8-core Mac Pro blah blah blah with 3x1t hard drives. I've used the Boot Camp utility to make one of those 1t hard drives into windows 7. This worked perfectly, in fact I'm currently typing from Windows 7. However...
When I've done this previously there was always a Boot Camp utility within Windows 7 (in the bottom right of my task bar) which allowed me to switch back from Windows 7 to Mac, and vise versa... This time the Boot Camp utility within Windows 7 which allows me to go back to Mac has disappeared ... I'm stuck in Windows 7!
Any idea why this might be? And how I can might download Boot Camp or something to rectify this problem?
Thanks in advance,
Matt

Your OS X 10.6 DVD has the 3.0.4 drivers and you would then need to update 3x to get to 3.3
So do you or did you get to 3.2 at least? 3.0 and 3.1 were buggy.
Mounting and accessing HFS drive volumes was also causing BSODs; and does not work when there are Apple array volumes.
There is also and better place to look is control panels: Boot Camp with its own startup disk section
'x' on startup = Mac OS
Check Services and startup items. You should have
OSSwitcher
Apple TimeServices (without which time will be off every time you switch OS)
Programs control panel: Boot Camp there? try Repair.
Lion allows downloading Boot Camp 4.x driver from Boot Camp Assistant to put on USB device or elsewhere that you access in Windows.
www.apple.com/support/bootcamp guide faq how to articles etc
Maybe you have a corrupt system and time to do a chkdsk and also boot from Windows DVD and allow it to do system repair or restore from a good check point

Install SL OS and a boot camp as disconnected from internet?

i am considering installing an install of Snow Leopard and Boot Camp Windows XP on a hard drive in my Mac Pro and i am wondering if i can keep this disk/OS disconnected from the internet.
i am assuming that Safari and Mac mail will come pre-loaded with the OS but i am wondering if there is a way to keep this a very stripped down without all the annoyances of being connected.
my other OS's are utilizing the world wide web in this machine.
TIA

Since I do absolute nothing with anything from Microsoft, I am going to have to guess here on that and say that I doubt it seriouslly.
There must be a way to turn off the network under Windows I would guess in a similar way that I suggested for OS X is also my guess. Exactly how to do that would take someone more knowledgable with Windows then me. Sorry.
Allan

Boot Camp utilities disappear from Windows 8.1

Hey,
I've done a search, maybe not for the right terms, and have only found responses that are quite old and deal with Windows 7; this may be the same issue but I can't tell.
I have a(n) nMP, and have successfully installed Windows 8.1 on a Boot Camp partition. Thing is, all of the Boot Camp stuff is now gone. I was just going to restart back into OS X, and I looked for the little taskbar icon for Boot Camp and it's not there. I looked through the system and have searched and I apparently no longer have anything called anything like Boot Camp in the Windows partition, but it's working great. Zero issues.
I can restart and hold down Option and choose which system to use to start up, no problem.
Do I need to re-install the Boot Camp stuff somehow? How on earth did this happen; could it be a result of downloading the AMD Fire Pro utilities and latest drivers (which seem to work a heck of a lot better than whatever was installed from Boot Camp)?
Following up to that, if I do reinstall the Boot Camp utilities somehow, will I lose my updated graphics drivers?
Hmm.
Thanks in advance, if I missed a thread about this, please feel free to point me in the right direction.
Stuart

Dear,
After a long moments fighting again Bootcamp and Windows 8.1, i have already install all drivers for 8.1... If you guy wanna try, follow this step:
1. Boot Camp 5.0
2. Open Boot Camp folder and manually install 1 by 1.
Especially for VGA Driver, you can try this driver (download on NVDIA site): 332.21-notebook-win8-win7-64bit-international-whql
Hope that will be useful to you guy.
BR,
TamHT

Is boot camp still available from apple to buy?

Similar Messages

Maybe you are looking for