Is BT Home Hub 4 compatible with IMac

When I first used HH 1.5 I had issues with the hub recognising Time Capsule and wondered if other users had any trouble with the new HH 4

hi
after 4 days the rooter restrt itself with this figurs below.
It keep restarting and my internet speed goes roght down. Whats shal i do?
ADSL Line Status
FAQ
1. Best Effort Test:  -provides background information.
Download  Speed
0.74 Mbps
0 Mbps
1 Mbps
Max Achievable Speed
 Download speedachieved during the test was - 0.74 Mbps
 For your connection, the acceptable range of speeds is 0.2 Mbps-1 Mbps.
 Additional Information:
 Your DSL Connection Rate :5.66 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
 IP Profile for your line is - 0.75 Mbps
Connection Information
Line state:
Connected
Connection time:
0 days, 04:27:39
Downstream:
5.531 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
10.4 dB / 24.0 dB
Line attenuation (Down/Up):
46.8 dB / 26.5 dB
Output power (Down/Up):
19.9 dBm / 12.3 dBm
FEC Events (Down/Up):
9141 / 11
CRC Events (Down/Up):
21 / 1
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
310 / 0
Error Seconds (Local/Remote):
13 / 1

Similar Messages

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

  • I want to purchase iMac i7 and want to know if my pc based LG dvd player (usb) is compatible ? also my external Hard Drive (usb) is it compatible with iMac?

    wiil my PC extermnal dvd player and external hard drive be compatible with iMac ore do I have to by all new stuff?
    Can data be recovered from Hard drive and transfered to new iMac simply?
    Thank you for your time and consioderation,
    depending on this answer will decide if i change over to iMac or not
    Pierre

    All USB drives should be compatible hardware-wise. If the drive is formatted NTFS, then you can copy from it, but not write to it. If it is formatted FAT or exFAT, then you can both read and write.

  • Using your old BT home hub phones with the home hu...

    If you want to use your old BT Home Hub phones with the new Home Hub 3. Here is a diagram showing how to do it.
    Using your BT Hub Phones with your Home Hub 3
    It may help people to utilise their old phones.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
    Solved!
    Go to Solution.

    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • NERO burned DVDs not compatible with iMacs?

    Can anyone confirm that DVDs burned with NERO
    (in this case NTSC, Region 0/NO region code)
    are not compatible with iMacs' DVD player?
    When I insert these DVDs they get mounted, but DVD player can't play them.
    Is there a way to fix this?
    Or does the maker of the DVDs have to use special settings in NERO
    to make them compatible?
    Thanks!

    Hi coxorange;
    Since Nero is not an Apple product, I suggest you ask the vendor who wrote it.
    Allan

  • Latest Blu-Ray burner compatible with iMac 2012 model?

    What is the best, latest external Blu-Ray player and burner compatible with iMac?
    I cannot get a real clear answer anywhere.... It also needs to run in both OSX Lion and Windows through Parallels software.....
    Please can I have makes and models and what is he best iMac software to use? Thanks

    Apple has shunned the Blu-ray format. If you need a Blu-ray drive look at the reviews @ the MacWorld website.
    Be prepared to bleed through the nose for this technology on the Mac side.

  • What OCR (optical Character recognition) software is compatible with iMac?

    What OCR (optical Character recognition) software is compatible with iMac?
    I am using OS X 10.9.1 on my iMac with an Epson CX8600 printer/scanner.

    My new Brother multifunction came with Presto PageManager. I can't recommend that it in the least. Its OCR is terribly inaccurate to the point of being unusable in my tests. Even normal sentences came out mashed together.
    I wanted to try IRIS, but it has no test version, just videos, that I could find, and emails to them just led to a Windows demo that is irrelevant. They ignored my email asking about a Mac demo, so I could not even try it out. That pretty much knocks it out of the running for me as this software is too expensive to just buy based on their promotional videos alone.
    Then there's Vuescan, and it's not too bad for OCR and supports about every device you could possibly conceive of using, and that's a plus. It was fairly accurate, but not as accurate as Finereader Pro. The interface is a bit complex to my taste.
    I've been testing out ABBYY Finereader Pro, and they do have a demo, and so far it seems to be the most accurate of what I've been able to test. It gets pretty close to everything on English and Spanish, and supports most common languages (check the list on their website). It even properly recognized syllables of phonetic Tibetan (using Roman alphabet, but it will not detect Tibetan). The UI is pretty good, but not perfect and there's no way to train for odd words you might need. I haven't tried it for Chinese or Japanese, but for my purposes, unless I find something more economical, I'll buy this one for its accuracy.
    I really suggest you download demos and try them for yourself as none of these are particularly cheap

  • Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Is Samsung Galaxy 4 compatible with iMac and other Apple products?

    Yes, the s4 is compatible with music and photo transfers between your imac.  I don't have experience with the cloud, but it should be the exact same thing. 
    Now, there will be a few differences between how you get the files onto said device.  With the iPhone, you may be able to do it wirelessly, but with the s4 you will have to plug it in. 
    The s4 will not work with iLife or iLife applications either.  However, bigger screen, more customizable ui and experience with samsung phones personally, I would recommend the s4 over the iPhone 5. 
    Finally iMac

  • Replace Home Hub 4 with Netgear DGN2000?

    I recently switched to BT Broadband from NewNet and replaced the Netgear DGN2000 ADSL wi-fi router that I had been using with the Home Hub 4 supplied by BT.
    I am finding that the wi-fi coverage provided by the Home Hub 4 is not as extensive as that provided by the DGN2000.
    Can I replace the Home Hub 4 with the Netgear DGN2000 and, if so, what username and password would be required to access BT?
    Solved!
    Go to Solution.

    I would suggest that you start by resetting the Netgear to factory default, to remove any existing configurations. Then start again via the setup wizard, if there is one.
    You normally need to enter a password in the second field, use a password of BT.
    Encapsulation: PPPoA (PPP over ATM)
    Multiplexing Method: VC-BASED
    VPI: 0
    VCI: 38
    Normally if it fails to authenticate, you are automatically directed to a BT Wholesale website.
    I am assuming that you are still on an ADSL connection, and not BT Infinity with the Openreach modem?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Can I relace my BT Home Hub 2 with an Airport Extreme?

    Can I replace my BT Home Hub 2 with an Airport Extreme?

    No. The HomeHub has a built in modem that must be used to access your Internet service.
    The AirPort Extreme is only a router. It does not have a modem onboard.
    You could the AirPort Extreme with the HomeHub....but not instead of the HomeHub.

  • Is Easy Acc USB 3.0 hub compatible with Mac OSX 10.9.4?

    I just purchased a new hub and my Logitech wireless mouse is not responding well.  Is it the new hub?  Can OSX 10.9.4 support USB 3.0?

    USB 3.0 is an international standard. Yes, it's compatible with OS X 10.9.x
    Reviews on Amazon from other iMac users have been positive.
    Just like with USB 2 hubs, some devices aren't happy sharing.
    I can't tell for sure it's the hub's fault. You need to try other combinations of connection.

  • FireWire/USB hubs compatible with a Dual 2.0 GHZ G5

    Hello,
    I have a IOGEAR 7 port Firewire - usb hub connected to my dual 2.0ghz G5. Often when I start my G5 there won't be any working firewire and/or usb port. Sometimes they work, but overall is a pain./ Sometimes repairing permissions or reseting the nvram or all helps solve the problem.
    Anyway, I would assume that the Hub is having some issues with the Firewire power coming from the G5
    I am trying to find a list of Firewire/USB Hubs which Apple officially have said are compatible with the G5.
    Do you guys know any of those?
    Thank you

    Q: Why start 2nd thread, even if one reply didn't fit or provide the options you wanted to hear?
    Same question asked once already -
    http://discussions.apple.com/thread.jspa?messageID=10322869
    I still think save and consider the next revision to the iMac line rather than throw more at your G5.
    SATA drives that you can use now and in the future are likely to be safe investments.
    People have used 3 x 10K VelociRaptors, along with cheaper but still fast WD Caviar 640GB as a great way to improve performance. SSDs are fast but probably for 1st gen G5 would require a PCI-X controller.
    Check the Drive Upgrade DB:
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • I have a BT home Hub 3 with standard BT broadband(no infinity), how do I set up an Apple AirPort Extreme without a stand alone modem? Can I use my current Home Hub

    I want to use an Apple AirPort Extreme as my home router but at present I have standard BT broadband using the BT Home hub 3. Can I connect them in some way so I don't need to buy a stand alone modem.
    IS THIS POSSIBLE???
    1. Would Apple AirPort Express be better and easier?
    2. What modem would be suitable if I can't do it any other way?
    I AM CURRENTLY USING MY INTERNET WITH PS3,WINDOWS 7 LAPTOP, IPAD AND IPHONE!!!
    Any help would be greatly appreciated.
    Thanks
    John smith

    You said that you wanted the layout to look like this:
    AT&T 2WIRE Router (wireless off) ---> AirPort Extreme ---> NetGear 16-Port Gigabit Desktop Switch ---> ethernet cabling to ports in most rooms --->
    So, we took that at face value....,.but it could look like this if things are more convenient this way, if you prefer:
    AT&T 2WIRE  > Ethernet Switch > AirPort Extreme and other devices.
    - If we include an AirPort Extreme in the overall network setup, are there any potential issues with the 2WIRE router and the AirPort Extreme router "competing" with one another?
    No, if you leave the wireless function off on the 2WIRE.  If you do want the utilize the wireless on the 2WIRE and the AirPort Extreme, then you want to keep them physically separated by 6-8 feet, or a few meters.
    - Do I really need an AirPort Extreme in the final setup?
    No, if the AirPort Express will provide enough range for the network.
    Or if I just want an extra WAP, can I operate two AirPort Express units (with the same SSID) downstream of a 2WIRE router?
    Yes, if both of them are configured to operate in Bridge Mode.  If you are using the "wizard" setup utility in AirPort Utility 6.x, the wizard will do this for you automatically.
    That is to say, could we have a setup that looks just like the image above, but with an extra AirPort Express tacked on to one of the unused ethernet ports?
    You can have as many AirPort Express devices (or AirPort Extreme devices) as you want, as long as each has an Ethernet connection back to the switch.

  • Accessing Home Hub 4 with windows 8.1 and Internet...

    Hello
    I can no longer access my home hub manager wirelessly running windows 8.1 and Internet Explorer 11 from my toshiba laptop by either typing in the IP address or by http://bthomehub.home/. I can still access it by either method from a laptop running windows XP. I have Infinity and Home Hub 4a. This problem has arose recently and I did upgrade from windows 8 last week so could this be the problem. Has anyone any suggestions?
    Regards
    Adrian
    Solved!
    Go to Solution.

    Seems to be a Network Adapter problem for most people, and usually updating the driver works.
    If you have just installed 8.1/8.1 pro, you will typically need to install your motherboard and other driver software. After you have done this, most people can access the internet, but have problems with the bt hub ip/url access link.
    To update the Network Adapter(s) use the following steps:
    1. search for Device Manager, and open it up
    2. Select/expand Network adapters, and the adapter(s) on your machine should show up.
    3. Right click on the adapter(s) that appear and select 'Update Driver Software'
    4. It should come up with 2 options - select 'Browse my computer for driver software'
    5. The next screen should come up with the default location for your machine, so just click the next button on the bottom right of this window.
    6. Your network adapter(s) will appear, and just select 'update driver software' and the latest version will be installed.
    7. That should fix most problems right away - if not, your machine (including hub and router) may need switched off and back on.
    I can't guarantee it will fix every problem, but the most common problem seems to be that the latest network adapter drivers needs a manual update after installing 8.1/8.1 pro, even after you install your motherboard / ethernet drivers.
    If you still experience problems accessing bt hub or internet, you can try this additional step:
    1. On your keyboard press Start + X keys (or microsoft logo key + X)
    2. This should open up system options dialogue box at the bottom left of your screen.
    3. Select Command Prompt (Admin) option.
    4. In command screen (old DOS screen) type the following: ipconfig /release (there is a space between config and /)
    5. This will release your ip address back into the network and cut your connection (don't worry)
    6. Whilst still in command screen, flush the dns cache - type: ipconfig /flushdns (space here again also)
    7. type exit to get out of command screen.
    8. Switch off your pc, and switch it off at the wall, also switch off router & bthub.
    9. Wait a few mins before flicking switches back on at the wall only - dont switch on pc yet - wait a min or so then switch on pc.
    10. You may need to run through the updating network adapter drivers again from the steps at the top - although this should not be needed.

  • Home Hub 3 with low sync speed

     Excuse a newbie who's somewhat jealous of people complaining how they only get 8Mbps!
    A combination of factors means that for months I have been getting a sync of 2624-3040, which equates to a profile of 2000-2500 and resultant download speeds of 1650-2250 using my old Voyager 2091. Then about a year ago, after fitting an I-plate etc. etc. I was achieving fairly consistent downloads at 2200 - so I asked for BT Vision. I can't comment on it, because almost immediately my download speed dropped and my profile was set back to 2000 so Vision was a waste of space. This didn't correct over time, so at the end of September I called up and an engineer came to test my line, swapped me to a new pair due to earthing issues and said I might want to replace my trusty old voyager. All this disruption still had negligible effect, so around Xmas I obtained a Home Hub 3.
    Bad to worse - in the last week I have had to reboot the HH3 at least 5 times (so I'll never get to the end of my BRAS training period) and whereas before I could watch Iplayer etc. 95% of the time, now it seems incapable of streaming for more than half an hour, before the speed drops below an acceptable limit. I'm close to junking the HH3 and going back to the Voyager.
    Is this normal? I've read about the HH3 dropping speeds on contention - am I seeing the issue because this makes my speed unusable? (A drop of 1Mb on an 8Mb speed might be annoying, but for me it's fatal!) or do I have a rogue hub .... in which case, what do I do?

    Results fresh in as you'll see - internet froze again 20 minutes ago and forced ANOTHER reboot.
    With regards to your standard questions - as you'll see from my earlier post, I had a BT engineer in with me for over 4 hours in September, so all the "normal" tests were done, internal wiring checked, quiet line test was done from the master socket, he even swapped me to a new pair with better earth. There are 3 extension and the NTE5, all filtered. .... oh and neighbours with another provider achieve 2K+ constantly.
    I am not now connected to the NTE5, but the engineer cut the bell wire and it has an I-Plate anyway (belt & braces!). During tests with him and for 3 weeks after (without a reboot) the router was connected directly to the master socket and it made no difference, except weakening the wireless signal to my office. So I am again connected to my office extension socket, as before, and the move had no discernable effect on sync since October.
    So I'm not really expecting much on sync,  live in a rural area, 2.5 clicks from the exchange (ADSL/POTS) but have a line length of over 4Km using the normal calcuation, probably with lovely aluminium along the way.
    I'm just gobsmacked that the new Hub appears to be unfit for purpose, drops the download speed at the drop of a hat and freezes up on a regular basis .... so this is my final fling before jacking it and probably joining my neighbours with a provider who CAN offer an improvement.
    ADSL Line Status
    Connection Information
    Line state:                               Connected
    Connection time:                      0 days, 00:16:54
    Downstream:                           2.625 Mbps
    Upstream:                               448 Kbps
    ADSL Settings
    VPI/VCI:                                 0/38
    Type:                                     PPPoA
    Modulation:                             G.992.1 Annex A
    Latency type:                          Interleaved
    Noise margin (Down/Up):          6.4 dB / 18.0 dB
    Line attenuation (Down/Up):     56.6 dB / 31.5 dB
    Output power (Down/Up):        18.1 dBm / 11.9 dBm
    FEC Events (Down/Up):             88308 / 2
    CRC Events (Down/Up):             3197 / 7
    Loss of Framing (Local/Remote):  0 / 0
    Loss of Signal (Local/Remote):     0 / 0
    Loss of Power (Local/Remote):    0 / 0
    HEC Events (Down/Up):             1694 / 1
    Error Seconds (Local/Remote):    544 / 3
    Test Results
    Test1 comprises of two tests
    1. Best Effort Test:  .
    Download speed achieved during the test was - 1752 Kbps
    For your connection, the acceptable range of speeds  is 400-2000 Kbps.
    Additional Information:
    Your DSL Connection Rate :2688 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
    IP Profile for your line is - 2000 Kbps
    2. Assured Rate Test: 
    Download speed achieved during the test was - 747 Kbps
    For your connection, the acceptable range of speeds  is 576-600 Kbps.
    Additional Information:
    Assured Rate IP profile on your line is - 600 Kbps

  • Klipsch ProMedia 2.1 compatible with iMac 12,2?

    After researching on line for a superior 2.1  external speaker component to purchase I bought the (wired) Klipsch ProMedia 2.1 speaker system. The owner's manual states since ProMedia 2.1 has an internal amplifier, they are designed to use the "line-out" connector of (my) computer. I realize that my 27" iMac desktop (mid2011) does have a 3.5mm minijack output for both headphones & "line-out".
    My concern is will the Volume Control of the control pod interface correctly allow volume control of my speakers? Considering that the owner's manual states: "Some soundcard and /or PC manufacturers may have software that must be adjusted separately from the WINDOWS volume control. -&- "SOFTWARE AND HARDWARE GAIN CONTROLS" directions are described for :  "Software Volume Controls in Microsoft Windows" - ONLY!
    I (naively) have expectations that Best Buy, being that the are the only outlet that I could find that sells these Klipsch's speakers -&- have a APPLE "store within a (MF) store", should **** well know if the two items (Apple computers & Klipsch external speakers) are compatible with each other!!  SILLY ME!!!!
    I do NOT suffer FOOLS, gladly!!
    If someone has experience or an informed opinion, I would be very grateful for some input. I suppose I could unpack the speakers and experiment, but **** it, when will computer-affiliated businesses learn that PC does not equal MICROSOFT (!#$!%) WINDOWS?
    -fpn

    Wondering if you ever got these to work. We purchased yesterday on a whim & after set up smelled hot metal & LED light went out on the one that has the controls. Only noises we have got out of them is a strange loud feedback & a pop when they are turned on or off. What gives?

Maybe you are looking for

  • Adobe Reader 9.1.3:  Error Accessing Preferences

    I am running OS X 10.6 (Snow Leopard).  All disk drives are configured as Mac OS Extended (Case-sensitive, Journaled) drives.  I was able to install the Adobe Reader 9.1.3 by creating the following symlinks in /Applications/Adobe Reader 9/Adobe Reade

  • Transaction to create root object in genil component.

    hi all , may be it seems to be basic question. i am following one tutorial where they are creating one genil component. in order to create root object, they told to run the transaction GENIL_MODEL_EDITOR. but i couldnt find the this transaction in my

  • Failed upgrade from 2.1 to 3.0

    OS: Fedora Core 6 Oracle: oracle-xe-univ-10.2.0.1-1.0 Current Apex: Product Build:      2.1.0.00.39 I used Apex that was bundled with XE for some time. Now I tried to upgrade, but ran into many errors like this: create or replace package body wwv_flo

  • Show quantity discounts only for wholesale

    I have consumer and wholesale pricing set up. Wholesale has quantity discounts which work when you login and add a quantity to the field. The problem is the way I have it now you can't see what those price breaks are. My question is, how do I display

  • Updating security interface

    Hi, I'm new to weblogic so sorry if I get the jargon wrong. We've been using version 5, and have customised security realms, but now we're moving to version 6.1 and I've been asked to implement/update the java interface for this version. Can anyone g