Is bugetting necessary for CWB?

Hello
We are implementing Compensation workbench but we are not using budgeting in the HR.
Is it necesary to define the Budget in HR for using Compensation work bench
Please advice...
Any best practice advice would really be help full
Thanks
Regards
Ramesh Kumar S

Hi Vikash
Thanks Vikash for your response
Actually i am asking about the same Distributing the budget down the Hirerchy
If you could share any metalink notes or setup steps for the Budget distribution it would be relaly help full
Thanks in advance
Regards
Ramesh Kumar S

Similar Messages

Is model view(BD64) necessary for EDI

is model view created using BD64 necessary for a EDI transactions? I have created a logical system, a RFC destination and a EDI File Port.
After all this i am trying to push a material master data using BD10 to the file port. When i do that the system gives me a message saying that master idoc created but it does not create a communication idoc. Only if i have a Model view set up in BD64 it creates a communication idoc. So my question is do we need a model view for EDI configuration?
~Suresh

Hi,
BD64 is required for master data distribution..
If you are having a interface that sends IDOCs to the customer or receive IDOCs from the vendor..You don't require BD64 setup..
Thanks,
Naren

HT3231 What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air

As I posted "it is an Unknown", at least to me, what type FW port is on the OPs older Mac.
LowLuster
HT3231 Re: What cables are necessary for the fastest transfer of data from MacBook Pro to MacBook Air
Dec 26, 2013 8:04 PM (in response to OGELTHORPE)
But the newest Mac notebooks do not have a firewire port.
So he may need a TB to FW adapter, $29, a FW 400 or 800 cable, $??, and then a FW 400 to 800 cable/port adapter (If the old Mac only has a FW 400 port), $??.
It is unknown if the old Mac has a FW 400 or 800 port.

I am running windows XP professional X64 Edition and it is necessary for me to instll Adobe reader 9

I am running windows XP profession X64 edition and it is necessary for me to install and use Adobe reader 9. Please advise procedure(s)

If you're NEVER going to EVER open a PDF, then no, it wouldn't be necessary. But you're going to be in an extremely rare set of circumstances if that's going to be the case.
Otherwise, you'll need it, and Reader 11 works with XP Pro.

Make IBAN field necessary for vendor master

Hi SAP gurus,
is there any way to make IBAN field in bank details necessary for vendor master?
I have tryed with SAPMF02K - EXIT_SAPMF02K_001 but there isn' t a iban filed.
thx in advances
V.
Moderator: Double-post

Dear all,
no unfortunately you can not set up this in field status.
It is possible as a workaround to use 'Bank Details' as mandatory in
OBD3.
This is possibly because IBAN can not be entered alone without the
traditional Bank Details. However, once you have entered the
traditional bank information, it is not possible to set the IBAN as a
mandatory field.
If I were you I'd have a look at user exit and SAPMF02K to
check the vendor master data.
You have also BTEs:
00001440 VENDOR MASTER DATA: Final checks
I hope it helps You.
mauri

Registration procedures necessary for the invoice issuance

Hi everyone,
We had requested a new G/L account registration with FI team.
FI has registered G/L code and released for testing. Now user has reverted with query, as
Weu2019re going to use the new G/L a/c primarily to issue more of sales invoices and receive payments on this account. Could you inform us if there are other registration procedures necessary for the invoice issuance?
Kindly suggest what are all necessary steps to perform this test - to post cutomer invoices and receive collections.
Thanks in advance
-Sumi

Hi,
Though my question is unanswered, still i m closing it, as no replies for last 3 -4 days.
Thanks.
-Sumi

What is necessary for FIM to connect to an AD in another forest?

Hello
I have FIM 2010 R2 installed on fim1.fim1.local working happily provisioning users into fim1.local domain.
Now due to merger we have a second forest additional.local
What is necessary for the existing FIM install to manage users on the additional.local forest as I cannot connect without error?
I can access the additional.local DC from the FIM Server and read the directory. Port 389 is open. I have a domain account on additional.local.
When I try to make an AD MA. I get the error message:
"Failed to search on DN cn=Aggregate,cn=Schema,cn=Configuration,dc=additional,dc=local"
and error code is 0x34.
I tried these values:
Forest: addDC.additional.local
User Name: Administrator
Password: ***
Domain: additional
Where am I going wrong?

Yes I can connect to the external forrest when the DCs have ports 389 88 53 and 464 listening.
However, just one oddity in this FIM. When I push the "Containers" button to select the containers. I must first configure and Add the preferred domain controller (as given on previous dialog form) before I get the list of OUs.
After configuring I can switch it off and all is Ok.
just a comment,just wondering why.
*HH

Is PAPI-WS necessary for Workspace in Enterprise?

HI Friends,
Is PAPI webservice necessary for running the Workspce in ENTERPRISE.
I mean I can able to login to Workspace without PAPIWS ear being depoyed to OBPM Enterprise (Websphere Application Server)
But I cannot see any activities in Applications pane required to start the applicaiton.
Please let me know if anybody knows if Workpspace used PAPI-WS appliction in Enterprise environment?
Look forward for help.
Cheers
Sh

Hi,
No, PAPI WS is not used by Workspace. It is used by Office Ribbon and you can also use it to build your own application.
If you do not see any application, you should check if your participant has the appropriate roles to see the applications of the deployed processes.
Hope this helps,
Ariel

Is Exception handler necessary for every stored subprogram

Hi All,
I knwo exception handler is very important. But is it necessary for every stored procedure or function?
For example,
procedure test(p_index_code IN varchar2(10)
p_changed_code OUT varchar2(15))
as
begin
IF p_index_code = 'A' then
p_changed_code := 'A'|| p_index_code;
elsif p_index_code = 'B' then
p_changed_code := 'B'|| p_index_code;
else
p_changed_code := p_index_code;
end if;
end;
This kind of simple procedures, do I have to add the 'exection when others than raise_application_error(-20001,'error in this SP')'?
I can't see obvious drawbacks without the exception handler in this CASE.
Best regards,
Leon
Edited by: user12064076 on Nov 11, 2010 7:12 PM

user12064076 wrote:
I knwo exception handler is very important. But is it necessary for every stored procedure or function?It is important to know WHY an exception handler is needed. There are couple of basic reasons why you want to use an exception handler.
The exception is not an error.
The exception raised is a technical error, but may not be a business or processing error. The typical example is the NO_DATA_FOUND exception. The business logic may say "+when there is no fixed discounts found, apply a 5% dis-count+". So not finding (dis-count) row data in such a case is not an exception. What does you exception handler do? It fixes the exception and there is not an exception anymore. In other words, the caller that called your code will never know that there was an exception.
Making the exception meaningful
An exception, like NO_DATA_FOUND, is not very meaningful. What is meaningful is NO_INVOICE_FOUND or NO_CUSTOMER_FOUND. Thus your exception handler can catch a generic exception and make it more meaningful by returning a custom application exception instead.
Action stations
Some exceptions will require you to clean up and fix what you can - kind of like action stations when a ship takes a hit. But as you cannot fix the exception, the exception must be passed to the caller so that it too can decide how to re-act to that exception. For example, you may have an open ref cursor or open UTL_FILE handle that needs to be closed when your code terminates. If not, your code will leak resources. So you need to trap exceptions that can occur, clean up, and then re-raise the exception (this is called a resource protection code block in other languages). You may have done a partial transaction - and the exception handler may need to roll back the changes your code made. The bottom line here is that you must re-raise the exception after you have done your "+action stations+" bit. You did not fix the exception. You did not make it more meaningful. In that case you must pass it back to the caller so that it can decide what it needs to do about that exception.
Using an exception for any other reason - that would likely be the wrong thing to do most of the time.

I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for mozilla to run properly. I really don't want a bunch of unnecessary downloads on my computer

I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for firefox to run properly. I really don't want a bunch of unnecessary downloads on my computer

None are '''''necessary''''' to use Firefox, but some parts of some web pages aren't going to work without a specific plugin being installed.

PageComposer Error - Cannot find the module necessary for printing C5051

Hi
Having some problems trying to setup a Windows 2008 R2 print server with shared Canon iR C5051 printer
I've created the printer, installed the 64 bit driver Canon iR-ADV C5045/5051 PCL6 v 20.90 and works fine for 64 bit Windows 7 clients, installed the 32 bit driver by selecting printer properties, sharing tab, additional drivers and selecting x86 and pointing to the 32 bit PCL driver. Driver installs fine on the print server without any errors.
Goto 32 bit client, add printer, select the shared printer from the printserver, printer installs Ok. When the user however tries to print, get the error:-
Canon PageComposer
Cannot find the module necessary for printing
Re-install the printer driver
I've done this countless times, any idea's on how to fix ?
Thanks

Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

URGENT: What else is necessary for me and why?

Hi All!
I am desiging a socket based data transmission system, and our messages, Connection Logs, Application Configuration Data will be stored in xml format. I have also designed dtd for them.
I NEED TO KNOW WHY AND WHICH OF (XSL, XSLT, XPATH, DOM, SAX, etc. ) SHOULD I USE TO PARSE THE XML DATA FOR JAVA APPLICATION. AND IS ALL THIS NECESSARY FOR THIS OR NOT?
Plz specify one sentence for each!
Thanks in Advance
Kashif

- XSL, XSLT: used for transforming XML in something else (XML, XHTML, text...)
- XPATH: used for querying nodes content, XSL relies heavily on this
- DOM: a parsing technique that will produce a hierarchy of objects (nodes) representing your XML doc,
- SAX: a parsing technique that will raise events for each specific part (nodes) of your XML doc.

EHP4 necessary for Adobe Interactive Forms?

Hi,
I was told that EHP4 ( Enhancement Pack 4) is necessary for the "Submit" functionality to work with Adobe interactive form. Can anyone confirm this?

Hi, I have awarded the points and will award for this new question, not sure if I should open a new topic but my question is related.
Refer to SAP Note 1100846 - Purchase document PDF forms are not to be used.
Based on the note, it seems like there is a need to upgrade to EHP4 for purchase document PDF forms to work. Any comments or workaround?

How to get objects necessary for transporting Business Content?

Hi Experts,
Small ques for u:
I have installed 0FIAA_C11, 0FIAA_C12, 0FIAA_C13 for Asset Accounting in Dev system. Already the previous content 0FIAA_C04 was installed and transported to Quality system.
Now I want to transport new content (0FIAA_C11, 0FIAA_C12, 0FIAA_C13) to Quality. But I guess since already some infoobjects were transported to quality, transport connection wud nt show me all necesary objects.
<b>So how to get a list of all objects necessary</b> so that my req does nt fail while moving to production from quality.(I think req might not fail while goin from Dev ->quality).
Thanks in advance!!
Sorabh

Hi Srini,
I have already applied "Before setting". But the problem is I dont want to transport objects which are not relevant to me, but only those which are necessary for content described in previous mail.
If we check the link provide by you " For activating an InfoSource, InfoObjects may also be necessary which are not contained in the InfoCube and have therefore not yet been collected. However, for these additional objects, the objects that come before them in the data flow are not collected.
" I am worried by about these.Some objects will be missing and some are in addition which are not all required, and we shud nt transport them.How to be sure tht transport will not fail and it is consistent as well?
Thanks for replying!!
Sorabh
Message was edited by: sorabh arora

5D Mark iii AF system - necessary for hobbyist photographer?

I take pictures of just about everything, including running/playing children. My biggest complaint about my current camera (a high-end point-and-shoot. Definitely time to upgrade!) is that it doesn't focus well on moving subjects, nor does it focus well in low-light conditions (or do anything in low-light conditions, really). I would like to purchase the 6D, but if it's going to give me trouble every time I try to focus on moving people, then it's not worth 2000 dollars. The 5D Mark iii apparently has amazing AF but, honestly, it almost seems overwhelming to me. My choices are a crippled AF or a complicated AF, and I'm not sure what to do. As a hobbyist photographer who often shoots moving subjects, will the 6D be adequate? Or should I buy the 5D Mark iii and just plan on spending a good amount of time with the instruction manual?

Wow, thanks for your advice, everyone! And you're right; money doesn't buy skill so I shouldn't waste an extra thousand as an attempt to make up for my weaknesses.
My camera is essentially attached to my hip; I take it everywhere and shoot anything that interests me at the time. However, I can pinpoint two conditions in which I spend the most time shooting. I photograph a LOT of events, maybe half of which are indoors with varying lighting conditions. I also enjoy taking pictures at night in the city - people and stationary objects/settings. I currently use manual focus for night and low-light indoor conditions (which is frustratingly difficult when people are moving), and I use a tripod and long exposures for most of my night pictures (which is limiting). Even then, the pictures rarely turn out as sharp and vivid as I would like. The thought of a camera that can produce better quality images in the dark or low-light AND that can AUTO focus in said conditions sounds marvelous, and that's the reason I'm aiming for full frame. It sounds like some of the crop sensor cameras may be better than the 6D for all the events I photograph, given their AF capabilities, but I'm okay with sacrificing some AF (within reason) and some cash for quality night and low-light shots. Maybe I'm wrong in thinking that full frame is necessary for all this though? I just read reviews and saw sample images and was impressed with the pictures coming out of full frame cameras in low-light and night conditions. I don't have hands-on experience with crop sensor cameras though, so I may be underestimating them. Please correct me if I am wrong in any of my assumptions!
Anyway, given my desire for nice low-light/night performance and AF performance with moving subjects at events, the 5D Mark iii is tempting. However, from what I've read and from what you all have told me, it sounds like the 6D will be a good fit for me while the 5D Mark iii is probably excessive. You asked about my budget. I have saved up 6,000, which is a lot, but perhaps not so much when considering that I currently own no photo equipment other than my point-and-shoot and my flimsy tripod, haha.

Is bugetting necessary for CWB?

Similar Messages

Maybe you are looking for