Is Canon PIXMA MG8220 supported by Easy-PhotoPrint Pro? Can several printer drives coexist?

According to the Canon site, Easy-PhotoPrint Pro supports PIXMA MG8220, but when the former is automated from Photoshop CC in MacBook Pro it does not find any supported driver. Canon helpers do not answer this question flatly. Would any one know the answer for good? Then, I would like to know where to find which printer drivers are running in that computer, the matter being that I have installed, most certainly unwisely, several.
Thanks for any answer

http://media.onecall.com/Image_Products/Canon/EPPP.pdf
http://software.canon-europe.com/software/0033490_0010722.asp?model
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
Are you able to print directly from Photoshop?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

Compatibility with Canon Easy PhotoPrint Pro - Pixma Pro 9000

Hi,
I have just downloaded and installed the trial version of Photoshop CS5, only to discover that in the Automate (Under Files) option, Canon's Easy PhotoPrint Pro is no longer listed.
I would be interested to know whether this is a Canon, or an Adobe problem
I found that with Photoshop CS3, this method of printing, provided most accurate colours
I would be interested in other subscribers, who print with the Canon Pixma Pro 9000, how they get best results from their printer - What options do you select in the print dialogue box, etc.
Brian

This sounds like a question about general Photoshop CS5 use. This forum is specifically for people using the Photoshop CS5 FXG feature with Flash Catalyst.
I recommend you post this question to one of the more general Photoshop forums:
http://forums.adobe.com/community/photoshop
Your question will get much wider exposure there, and you are more likely to get an answer from the Photoshop community.

Easy-Photoprint Pro voor de Canon 9000 Pro printer

Ik installeerde onlangs Adobe CC ter vervanging van Photoshop C6 op een windows 8.1
Ik gebruik een Canon Pixma 9000 Pro voor het afdrukken van mijn foto's.
Hiervoor bestaat een plug-in namelijk Easy-Photoprint Pro.
Die heeft altijd feilloos gewerkt op mijn oude CS5-cersie en nog altijd op mijn CS6.
Maar voor de CC-versie werkt hij niet meer.
Ik heb de nieuwe software bij Adobe gedownload en geïnstalleerd maar dat helpt allemaal niet.
Na contact opgenomen te hebben met Canon zegt men dat het aan de CC ligt.
Ik wordt van "het kastje naar de muur" gestuurd.
Hebben jullie ervaring??
Mvg,
Marcel Martens

http://media.onecall.com/Image_Products/Canon/EPPP.pdf
http://software.canon-europe.com/software/0033490_0010722.asp?model
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
Are you able to print directly from Photoshop?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Photoshop CS6 - Problems with Canon Easy PhotoPrint Pro!

Hi,
I have been a user of Photoshop for years, starting with CS2, and upgrading regularly.
Currently, I have Photoshop CS6, working on Windows 8, 64 bit!
With every version of PS, I have installed a Canon add in, called Easy Photoprint Pro.
I have found that this provides the best colour match (monitor/Canon Pixma Pro 9000 printer).
With CS 6, I find that as soon as I try and run Easy Photoprint, Photoshop stops working and closes down! (File >> Automate >> Easy PhotoPrint)
I have down loaded both the latest versions of PS from Adobe com, and Easy Photoprint Pro, from Canon - The latter is claimed to be compatible with Windows 8 and Photoshop CS 6.
I have tried disabling all other programs, at start up, and disabling all non Microsoft services; also disabling my Security suit!
I would be interested in hearing if anyone has experience this problem, and has a solution

The problem has been resolved, I think! For anyone interested,
(1) I completely uninstalled all Adobe and Canon software and drivers!
(2) I then deleted all Canon and Adobe folders on my C drive (Program Files & Program Files X 86).
(3) I then ran REGEDIT and deleted All Canon and Adobe Keys!
(4) I then ran CCleaner Registry cleaner!
(5) I then Restarted my computer!
(6) Finally, I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS DID NOT RESOLVE THE ISSUE!
I then repeated steps (1) to (5), but started my PC in SAFE MODE!
I then repeated step (6); namely:I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS APPEARS TO HAVE CLEARED THE PROBLEM

Canon Pixma MP170 support maybe?

I've recentry got Canon Pixma MP170 (multifunctional drvice (2in1 scanner and printer)).
Anybody got this working on arch?
lshwd:
00:00.0 Host bridge: nVidia Corp.|nForce2 AGP Controller (nvidia)
00:00.1 RAM memory: nVidia Corp.|nForce2 Memory Controller (unknown)
00:00.2 RAM memory: nVidia Corp.|nForce2 Memory Controller (unknown)
00:00.3 RAM memory: nVidia Corp.|nForce2 Memory Controller (unknown)
00:00.4 RAM memory: nVidia Corp.|nForce2 Memory Controller (unknown)
00:00.5 RAM memory: nVidia Corp.|nForce2 Memory Controller (unknown)
00:01.0 ISA bridge: nVidia Corp.|nForce2 LPC / Legacy / System Management (unknown)
00:01.1 SMBus: nVidia Corp.|nForce2 SMBus 2.0 Controller (i2c-nforce2)
00:02.0 USB Controller: nVidia Corp.|nForce2 USB 1.0 OHCI Controller (ohci_hcd)
00:02.1 USB Controller: nVidia Corp.|nForce2 USB 1.0 OHCI Controller (ohci_hcd)
00:02.2 USB Controller: nVidia Corp.|nForce2 USB 2.0 Enhanced Controller (ehci-hcd)
00:04.0 Ethernet controller: nVidia Corp.|nForce2 MCP Networking Adapter (forcedeth)
00:06.0 Multimedia audio controller: nVidia Corp.|nForce2 Audio Codec Interface (snd-intel8x0)
00:08.0 PCI bridge: nVidia Corp.|nForce2 External PCI Bridge (unknown)
00:09.0 IDE interface: nVidia Corp.|nForce2 UDMA 100/133 IDE Controller (amd74xx)
00:1e.0 PCI bridge: nVidia Corp.|nForce2 AGP Host to PCI Bridge (agpgart)
02:00.0 VGA compatible controller: nVidia|GeForce FX 5600 (vesa)
003:002 USB Human Interface Devices: Samsung Info. Systems America, Inc.|SyncMaster 757DFX HID Device (usbhid)
003:001 USB Hub: Virtual|Hub (hub)
002:002 USB Human Interface Devices: P880 (usbhid)
002:001 USB Hub: Virtual|Hub (hub)
001:004 USB Vendor Specific Class: MP170 (unknown)
001:001 USB Hub: Virtual|Hub (hub)
---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)

Since Canon does not care about Linux, there are only two chances:
1. Undigging something usable out of Canon's japanese FTP site (not too likely).
For the moment, nothing is in there:
ftp://download.canon.jp/pub/driver/multipass/
2. Warm up the 29.95 euros in your pocket and hope the next Turboprint version will support the printer part of it (that's more likely).
As for the scanner part, things look bleak...
The hardcore solution: Install Vmware player (free), ask a friend of yours with a full VMware licence to create for you a windows (any supported, or any you have a licence for...) virtual machine, and use that one to print/scan with the Canon drivers for windows... I know it sounds absolutely ugly, but blame Canon for that.

CANON PIXMA MX397 SUPPORT CODE 5B02

pls help me with my canon printer pixma mx397...at first, it said that ink waste pas was full so i just clicked the ok button on the machine. but when i tried nozzle check or deep cleening, it said "Printer error has occurred. support code 5B02" how can i fix this problem?
thanks and God bless!

Ebony, I'll spell out specifically what could be inferred from my post. 11 inch paper works, 10.3 inch paper fails. I'm not sure at what point between those two lengths the failure begins. Some experimentation with various lengths could more precisely determine that, but Canon should do that research themselves. The point is that it makes no sense to me that this limitation exists. The mechanism should continually feed whatever size, within reason, that is fed as long as it detects more pages. Obviously as some point the doc will be too short to feed correctly, but a difference of seven tenths of an inch is reasonable to expect functionality to continue. Having 42 years of software development behind me, I really feel this issue can be fixed programaticly, be it driver or application.

I am trying to install a Canon Pixma MG8220 which requires my Airport Extreme password. I do no know it. I then went to default Airport settings and renamed my network, but Airport required my password. How do I create a new password?

How do I create a new password for my Airport Extreme if I do not know the old password?

If you have the Mac that you used to configure the AirPort Extreme originally, you may be able to retrieve the password from KeyChain Access.
See this User Tip from forum expert Tesserax:
AirPort - Regain Access from Forgotten Passwords
If still no luck, you can reset the passwords again. Pay very close attention to the information about a Soft Reset in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

New Canon Pixma ip4600 won't show on my Airport Express printer list

Hi,
I've just had to replace my old Pixma ip4000 printer with a new ip4600 printer. The printer has set-up on my iMac and Macbook but it does not show in Airport Utility in the printers section. I've tried unplugging the printer from the USB and unplugging the AE but whichever combination I try it does no good. All ok on the usb direct to the computer.
I've followed many of the support articles to no avail. Can somebody help please? Until the printer shows on the AE I'm unable to print wirelessly.
Regards,
Colin Ashworth

Hi Colin,
As you have said in your post, until you can get the Express to recognise the iP4600 as being connected via USB, you will not be able to add the printer. And note that you cannot use the More Printers > Canon IJ Network facility - this is for Canon's that are connected via Ethernet or wireless to the network.
Are you using the same USB cable to connect the iP4600 to the Express as you are for connecting directly to the Mac's USB? If not, then try another USB cable.
If you are using the same cable, then has the Express got a reset button? I know the Extreme's do and I'm thinking that possibly the Express is still expecting the iP4000 on the USB. If there is no button then you could a factory reset via the Airport utility. You could also check if there are any updates for the Express.
PaHu

I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC. Printer worked fine with Netgear previously. With USB from printer direct to Laptop it will print. The printer is definitely set up correctly to acknowledge the router. W

When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
Can anyone offer advice? Thanks.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

My canon pixma E510 scanner is not working

My canon pixma E510 scanner is not working any error "Your printer is in use" popups every time is use scan command

Hello parvenza,
It sounds like you are experiencing issues with your Canon scanner, I'm sure that is frustrating. I have found an article with some resources that may help get your device back up and running:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
If these steps yield no results, you may want to take a look here:
OS X Mavericks: If you can’t scan
http://support.apple.com/kb/PH14261
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Have downloaded a driver for my printer ( Canon Pixma ip 4000) from suggestions on this page. It works up to the point of printing but then nothing happens. Can anyone help?

Have downloaded drive from my printer ( Canon Pixma ip4000) to my new macbook air. Used a driver as suggested in previous correspondence in this support group. It downloaded but it does everything up to the point of printing then it stops. Any suggestions?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Canon Pixma MP970 Printer - Need Help Installing on 10.9.3!

I have a Canon Pixma MP970 printer that I cannot get to work on my MacBook Pro running OS 10.9.3! I had no issue running it on the initial release of OS 10.9, but now it is making me pull my hair out!
I recently wiped my ssd and reinstalled OS X from the recovery partition and this is when I began encountering the issue. I went to the Canon website and there are no drivers provided because it says they are already contained in OS 10.9 (and the Canon website already detects my OS). I have plugged the printer into my MacBook Pro using a USB cable and running software update (to make sure any drivers are downloaded) and there is no download. I have tried entering the printer IP address manually and still nothing.
I am out of options unless a kind soul on these forums can light the path for me. Is it possible this printer is no longer supported after an incremental OS update?
Printer: Canon Pixma MP970
Connection: Home network, wired LAN to router (printer itself already configured for network, and was working before ssd wipe)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Has anyone else had problems with the Canon Pixma MG3250 on their air?

I bought a Canon Pixma yesterday, and I have had problems setting the printer up as one I don't have a cd drive- so I had to download the software- and two my laptop does't seem to recognise the printer wirelessly. It is fine when I stick the USB cable in. I contacted apple to see if it was a software issue, they helped by getting a couple of things up- then I followed the guide from canon on how to install the printer and and connect to WPS but it just doesn't seem to like my mac. Help I'm at my wits end!

I had a similar problem. After i extracted the audio track from a clip (so i can edit it down for a drop zone in iDVD) iMovie aborted and i couldn't get it to run correctly with that video again. Each time i tried to open it, iMovie would hang with the startup dialog saying there was less than a minute left to load the video.
I trashed the video and pulled up my backup from my outboard drive (tedious; >.5hr over USB 2), i'm going to try again.
I have QT Pro also (i upgraded for the file conversion features, mostly).
PowerBook G4 Mac OS X (10.3.9)

Canon Pixma MP650

Hi
I've bought a Canon Pixma MP620, installed software and drivers but can't get the printer to show to add it through system preferences. I have installed the latest drivers off the Canon website but still no luck.
I have repaired using running disc utility and got the following in the disc utility log:
2009-06-05 19:44:56 +0100: User differs on "Library/Printers/Canon/BJPrinter/Utilities", should be 0, user is 501.
2009-06-05 19:44:56 +0100: Group differs on "Library/Printers/Canon/BJPrinter/Utilities", should be 80, group is 0.
2009-06-05 19:44:56 +0100: User differs on "Library/Printers/Canon/BJPrinter", should be 0, user is 501.
2009-06-05 19:44:56 +0100: Group differs on "Library/Printers/Canon/BJPrinter", should be 80, group is 0.
2009-06-05 19:44:56 +0100: User differs on "Library/Printers/Canon", should be 0, user is 501.
2009-06-05 19:44:56 +0100: Group differs on "Library/Printers/Canon", should be 80, group is 0.
2009-06-05 19:45:01 +0100: Group differs on "private/etc/cups", should be 0, group is 26.
Still no luck.
Anyone have any suggestions what I can do now?
Thanks,
Jason

I have the 610. Drivers must be a year old by now. Everything works fine.
My personal rule-of-thumb check list for this kind of issue is:
1) Check your cables
2) Assume human error
3) Check your cables again
4) Scream Khannnnnnn!!!!!!! at the top of your lungs.
5) Check your cables and try a different USB port
6) Return the printer.

Error 306, using WiFi, often on the Canon PIXMA models

I've seen the following error on numerous other boards and here on older Apple posts, too:
Error Number 306 A communication error has occurred
I thought that I had done all the correct steps to solve the problem, but it still wouldn't work. Then, I found two different posts which said similar things (one which was really close by Pahu, thank you!) that led me to the correct result. So, I wanted to lay it out in explicit detail here, in the hopes that others could solve their problem quickly & easily. The prerequisite for the steps below is that _your Canon is powered up, configured, & WiFi connected to your LAN_. Here's what I did *that worked*:
• Delete any previously installed (i.e., non-working) printers for the Canon
• Download the basic Mac installation software for your Canon model at this link, *making sure that you're installing the Canon Networking software* (it may be a separate link, or it could be bundled into their basic install - YMMV):
http://www.usa.canon.com/consumer/controller?act=SupportIndexAct
• Download the latest printer driver for your model, same link as above. Yes, you will need to download at least these two items, since the drivers in the original installation will not be the latest & greatest.
• Install the basic installation/networking software first, then update the drivers
• Go to System Preferences:Print & Fax
• Click '+' to add a new printer, select Default in the top, left corner of the Add Printer window, then wait for 15-30 seconds
• You'll see another Canon printer appear on the list, with a string of numbers after its name. *This is the one you want*, NOT the one which is already there when you first click Default. After you select that printer (do a Test Page to verify it works), you can go back and edit it, trimming the name down by cutting off the string of numbers; doing so will not affect the printer's operation.
That's it! The real trick was in selecting the networking version of the printer which is "discovered" by the network when you pull up the Default tab. Whenever I tried to use the standard version of the printer, even though I could do things like clean the heads and actually receive a printout from doing so, I could never send anything to the printer successfully. Hope this works as well for you as it did for me!

AFAIK, this IS a solution, which is why I entered it. Let me know if it works!

Is Canon PIXMA MG8220 supported by Easy-PhotoPrint Pro? Can several printer drives coexist?

Similar Messages

Maybe you are looking for