Is Canvio 1T compatible between Vista & Window 8.1?

The Canvio says compatible for XP, Windows 7 & 8. The backup worked with no problems. Unfortunately, I can't restore to the new Win 8.1 laptop. The old, new and Canvio are all Toshiba products, if th at makes a difference. The Win 8.1 was bought as a Win 8 operating system, & upgraded to 8.1.
I tried going to Control Panel and the File area, tried doing it by File History and also clicking on the restore link in the bottom left corner. I may be doing something wrong, I assumed that when I plugged in the External HD, it would install the program included on the External, but it didn't. So I went on the E: drive, found the setup and think it downloaded onto the new laptop. For some reason, when it gets to the point where it wants to look for the newest update, it won't let me click 'continue'. This leads me to wonder if the External isn't compatible with 8.1.
Please let me know any suggestions because this is driving me buggy not being able to get it to work.
A second question? Can you backup 2 different be done on the same Canvio>

I tried again today, still nothing. I get the program for the External up, but it won't let me restore. Someone out there has to have had this same problem.

Similar Messages

Syncronizing to Vista windows Calendar & contacts

Hi,
I am trying to set up syncronization between Vista Windows Calendar and Contacts with my Blackberry. These programs came with Vista. I can not afford Outlook, but I need a calendar and contact program on my computer.
I go to configuration > configuration Synchronization settings>
Then what do I do? I tried selecting ASCII Importer/Export but the next step asked me to link to a file, and I don't have a clue what to link to?
gthe other choice was yahoo and I have comcast mail.
Someone please help? Any suggestions?

Hey... if you have the NEWEST bb software all you have to do is
1) Connect your device
2) Go to the organizer tab
3)Click address book and only address book for now and click configure settings
4)Click on address book and click SETUP
5) Click on Windows ( what ever operating system you have) and click next.
6) Do the one way sync
7) Click Finish
8) Once clicked finished it will bring you back to the screen of 4 options. Click cancel and yes.
9) at the bottom of the screen click, SYNC. Your windows contacts should be synced.
It did this for me... I have bb torch 9800. If you need help email me at [email protected]

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

Acrobat Pro version 6 not working in vista ( Windows 7 ) ?

What is the problem with adobe Acrobat pro version 6 and vista (windows 7)?.....really annoying having to upgrade later version costing hundreds of pounds

I am not sure if VISTA has the same problem as Win7 or not. For Win7, the AcroTray application that is used for PDF creation (both when printing to the Adobe PDF printer and with PDF Maker in AA6) will likely not work correctly. This may also be the case with VISTA. To get around this problem you have to print-to-file (you can change the PDF Port to FILE in the printer properties). After the file is create, you can open it in Distiller to complete the PDF creation. It may be possible to create watched folders to automate this process, but is not as ideal. In any case, you will likely have to use a work around. Also, update your AA6 (currently at 6.0.6). I have been able to do this with AA5 on Win7 as a test and it did indeed work. There may still be other issues for AA5 on Win7, but that was the major one.
All of these changes came from the rewrite that Adobe had to do to be compatible with the new OSs, not a trivial task. Do you want to blame Adobe or MS or both? Take your pick, but the end result is that it is time to upgrade. Unfortunately, AA6 can not be upgraded to AAX. You have to buy AAX at full cost at this point. To get the upgrade you would have to have at least AA7.

Is Adobe Photoshop Elements 11 compatible with Vista?

Is Adobe Photoshop Elements 11 compatible with Vista?

Hi,
Yes, pse 11 should run fine on windows vista.
http://www.adobe.com/products/photoshop-elements/tech-specs.html

Cs3 and cs4 web standard compatible with vista home basic?

Are Adobe CS3 and CS4 Web Standard compatible with Vista Home Basic 32bit?
I only see Windows Vista Home Premium / Vista Business / Vista Enterprise / Vista Ultimate / XP listed as compatible.
Many thanks.

Vista didn't exist when CS3 was released and as such, there is no official statement regard compatibility of CS3 with Vista Home Basic.
For CS4, we are very explicit. CS4 is not at all supported for Vista Home Basic (there are a number of networking and service support components that Microsoft leaves out of their Home Basic versions).
- Dov

What version is compatible with Vista?

What verion of Adobe Reader is compatible with Vista?

If you read the Release Notes for 10.x carefully, you will find that the only Windows version that was dropped from support is Windowx XP (in 10.1.12). Vista is still fully supported.
Regarding the "crapware": there are a few good alternate PDF viewers out there; the piece of software that you mentioned is not one of them.
I have tested that software since version 1.0, and each time they sneaked spyware onto my system. In the first version they didn't even bother to mention it. In version 2 they gave the user a choice, but installed the spyware anyway, without the possibility to uninstall. I gave up testing that software after version 4.
So it's you that needs to use a very good antivirus product. (Well, everybody should, actually.)

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

Superb detail, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

What type of Fonts are compatible between Mac and PC?

Hello all:
I work in InDesign primarily from a Windows based PC. I occasionally do some work on a Mac as well. I have a mixture of font type I use (TTF, OpenType etc) on my PC. I know a lot of font types are not compatible between PC and Mac. My questions is, are OpenType fonts compatible with Mac?
What suggestions would you give to people working on two platforms as to how to best manage their font library (short of buying two versions of the same fonts)?
Thanks.

OpenType and Windows TrueType fonts are usable on both Windows and MacOS X. Windows Type 1 fonts can be used with Adobe applications on both Windows and MacOX X (although on the Macintosh, the Windows Type 1 fonts must be put into the Creative Suite's private font directory).
Macintosh Type 1 and TrueType fonts cannot be used on Windows systems under any condition.
Going forward, for cross-platform compatibility, at Adobe we would strongly recommend exclusive use of OpenType fonts, thus avoiding the need for purchasing more than one version of any font.
- Dov

Hi, I get the Acrobat 6.0 I can't install it to the vista window. Please tell me what to do

Hi, I get the Acrobat 6.o. I can't install it to the vista window? Please tell me what to do.

Hi tan tran,
Acrobat 6.0 is not recommended by Adobe for windows Vista.
I would suggest it would be better to upgrade your application. Latest version will be better compatible with new operating systems, new features and better support.
Regards,
Ajlan Huda

File not found in Link Between Projects Window - test no edit rights to other file

Hi,
I am doing a test to see if i can create a link by typing the link path (f.i. <>\plan2\1) in the predecessor column without having edit rights to the other plan.
I expect this to be possible as the edit in the other plan (creation of link) is only done after the change is accepted through the LBP (link between projects) window. Besides, when i do it to both my own plans, in this LBP window i get 'create external
link' as difference to accept.
When I do it on Project Server 2010 to a plan I do not own or having edit rights on, I got the message 'file not found'.
Is this message related to what I am trying or does it have another cause?
Does someone know if what I want can be done?
Rgds
Sander

Hi Sander,
I confirm that for creating a link between projects, you need to have access in read-write to both files.
Indeed creating such a link will write in both files information about successors (in the source file) and predecessors (in the destination file).
Note that if you only need to update the successor, you don't need anymore to open in read-write mode the source file, since you won't write any more information in it.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

Hi All,
I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
thanks for your replies,
equi

Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

Adobe 7 is not compatible with Vista, If you are not satisfied with that answer...

Unfortunately for what I do for a living I can't use a mac, cannot WAIT till they do become compatible or I just switch professions!
I have adobe 7Pro because I MUST create PDF documents for my business, however when my laptop crashed for the 3rd time in less than a year and I was NOT about to pay HP $400 to reboot it, instead I had fun and smashed it (like in Office Space) and went out and bought a new Sony Vaio. This laptop is nice and all however now ALL new computers come with Gates newest form of a rip off, VISTA, which had so many issues they release a new update for it every day and professional companies wouldn't touch it, so they FORCED it on us small business owners and personal computer users, such CRAP! (If you notice all large corporations use XP, there is no Vista for large corps, there's a reason for that...
The people that do NOT have the $ to keep upgrading and paying for FIX ITS online from some unknown who has figured a work around are forced to use this crap!!! I'm BEYOND anoyed... ANYWHO I am installing my adobe 7pro and every time I open it I get asked to "ACTIVATE AGAIN" so I call in to get a NEW Activation code and a minute later it does it AGAIN... SOOO, I get Tech support and the IDIOT in India literally READS to me the following statements:
"Adobe 7 is not compatible with Vista"
I tell him, that's a lie because my friend uses it on vista.
He proceeds to READ to me "If you are not satisfied with that answer, then acrobat no longer supports Adobe 7". WTF?!?!? If I am not SATISFIED with that answer!??! aparantly he was NOT supposed to read THAT part!!! Laughing I proceed to tell him to piss off and hang up on him because I am SOOO tired of all these damn AMERICAN companies outsourcing their customer service to some 3rd world country where they pay these people $5 a week and have them just read from a ******* script for your problems, that is NOT technical support, that's BULL CRAP! I know 4 yr olds that read english better!!!
I am sick and tired of it... I might just take advantage of the 14 day return policy and go to Apple and buy a mac next week and change my profession sooner than I had planned JUST TO AVOID USING THIS CRAP!!! ADOBE YOU SUCK!!! Microsoft SUCKS!!!
If you run into this problem do what I am doing, go to Apple and buy a mac, we need to stand up against all this and pay attention to the COMMERCIALS that are VERY TRUE and drop Microsoft, IBM, anything Gates related and stop using their products!!!

Thanks Mike!
I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
yet and I've spent $800 to have it fixed twice already, this 3rd time I was
DONE... so I moved onto Sony, but this Vista just is making my life a living
hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
nerve racking and is costing more than I make in a week in this business
(real estate processing)... I should sell Microsoft for a living, I'd be a
millionaire!
My husband's Mac has been through hell and back physically, is 5 yrs old and
we've never had to take it in for any upgrades or issues, its SO easy to
use... why can't Microsoft be the same?!?!
Thanks for your input and for being understanding of my frustration, I bet
you see those often! LOL

What is the difference between Constant Window, Variable Window,Main Window

hello all
what is the difference between 1) Constant Window
2) Variable Window
3) Main Window in SAP SCRIPT

Hi,
Window Types
When defining a form window, you must select a window type for the window.
You can choose between three types:
Constant Windows (CONST)
Variable Windows (VAR)
Main Windows (MAIN)
Constant Windows (CONST)
Starting with Release 4.0, the system internally processes windows of type CONST similar to windows of type VAR.
Therefore, if you create a new window, always use type VAR.
Variable Windows (VAR)
The contents of variable windows is processed again for each page, on which the window appears.
The system outputs only as much text as fits into the window. Text exceeding the window size is truncated;
the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike.
The only difference is that constant windows have the same size throughout the form.
Main Windows (MAIN)
Each form must have one window of type MAIN. Such a window is called the main window of the form.
For SAPscript forms, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to
output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form.
The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page.
This page must not call itself as subsequent page (recursive call), since this would produce an endless loop.
In such a case, SAPscript terminates the output after three subsequent pages.
For printing header lines or totals, the different output areas of the main window are of special importance.
go through this links:
In Scripts Variable window and constant wind difference?
Main Window
Re: Main Window in SAP Script
What is the difference between Constant window and variable window?
Regards
Adil

Is Canvio 1T compatible between Vista & Window 8.1?

Similar Messages

Maybe you are looking for