Is cisco prime infrastructure support / can be run as syslog server?

Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
Jerri

Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps

Similar Messages

  • Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Prime Infrastructure/ Assurance is  positioned today more towards managing network elements and network performance,  rather than server infrastructure. We are in the process of adding Datacenter  component support, with more focus on Nexus and UCS- due later this  year.
    Having said that, Prime Infrastructure allows the system user to  add custom SNMP polling templates, which can then be used for polling any SNMP  based values from any SNMP enabled device. These can be used to collect the  information you specified below and the polled information will be available in  dashboards and reports.

  • Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

    My Cisco Prime Infrastructure ver. 1.2.1.12
    Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
    Please let me know how to access or enable the feature.
    Thanks,
    Tek

    This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV. 
    Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

  • Cisco Prime Infrastructure 2.1 GUI authentication via RADIUS server (Cisco ISE 1.2 integrated with AD)

    Hi,
    I want to access Cisco PI 2.1 GUI using my AD credentials, so on PI I've enabled RADIUS AAA Mode and added RADIUS servers (two ISE nodes in our case). On ISE I added PI as RADIUS client and configured the same keys. Next, on ISE I created authorization profile PRIME_ADMIN_ACCESS with only attribute settings defined:
    My authentication and authorization rules relating that case are as on following screenshots:
    So when I open GUI of PI and enter my AD credentials to log in I have no success and I receive following message:
    Looking in ISE's Authentication section I can see following:
    Time difference between these two authentication/authorizations is just 25 msecs and clicking on each of them reveals following:
    So at first I can authenticate and authorize (authorization profile has necessary attributes defined for PI management access (NCS:role0=Root, NCS:virtual-domain0=ROOT-DOMAIN)) and after 25 msecs I am getting failure. So what could be cause of such things and how I can successfully log in to PI GUI authenticating via ISE using AD credentials?

    Hi,
    -- Please Go to Administration > Logging > set the Message level to TRACE > Click save
    -- Then try to add the ISE.
    -- Once it fails, collect the logs from Administration > Logging > 
    check the "ncs-0-0.log"  & search the file for "ERROR" & paste the results here. This will give us exact reason.
    - Ashok
    Please rate the post or mark as correct answer as it will help others looking for similar information

  • Cisco Prime Infrastructure 1.2 - Remote FTPrepository Sizing Guide

    Can anyone provide a link to a sizing guide for remote FTP repository for backing up Cisco Prime Infrastructure 1.2 to a remote FTP server?                  

    A personal observation; In PI 1.1, with the small ova we were running around 300 AP's and I had noticable slowness and issues.  At that time, TAC mentioned that I should go with the medium as it was a known problem  Now, despite being on 1.2 and alot of the issues resolved (and now new ones), if faced with the need to start over and I could spare the hardware, I would still go with the medium.   My personal opinion is that Cisco VM's require way to much.  On the other hand, knowing that it's relying on a built in Oracle DB, which from my experience with virtual servers, databases in VM = bad, it's understandable.  Not everyone agrees with this point from vm gurus to db geniuses, and I'm not a professional vm guy, just play one on tv, but personally i shove as much hardware as I can afford from my host at it if it's a db in a vm.  This comes from being in an enterprise with multiple oracle db's in multiple vm environments.  My 2cents.

  • Problem with implementing license in Cisco Prime Infrastructure 2.2

    Goodday,
    For Cisco Prime Infrastructure 2.2 I downloaded an license from the license portal.
    This concerns a eval/demo license, for an demo of Cisco Prime Infrastructure 2.2.
    When selecting the the type of license you get a few options, from which I selected the basic, advanced and lifecycle evaluation licenses. This is the type of license that is required for our demo.
    After completing the wizard I can download en implement the license.
    Until this point everything goes as it supposed to be.
    When i go to the Prime Infrastructure 2.2 appliance (running on VMWare ESXi 5.5.0).
    When I go to the license section in Cisco Prime Infrastructure I can implement the license, however if I implement the .lic file I get the error “Unknown feature (PI_VM)”.
    I have done implementing license files before, but this is the first time i encounterd this problem.
    Who can help me with this error?
    Regards,
    Dennie Verhoeven

    Hi Dennie,
    PI2X-BASE-LF-AS-US-VM-N-EVAL-90   >> I think you have used this product name while generating the license
    Either you try generating a new license or  contact cisco license team to generate a new license
    with the information  like below ::
    Product Name                : R-PI2X-K9
        Product Description         : R-PI2X-K9:R-PI2X-K9 : Cisco Prime Infrastructure 2.x
        Product Qty                 : 1
        UDI                        : PID: PRIME-NCS-VAPL  SN: ANY:ANY
    Serial no : with ANY:ANY will work as  starting from PI 2.2 , there is no node locking with license.
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Cisco Prime Infrastructure multitenancy?

    Hi can someone please give me an indication if Cisco Prime Infrastructure supports multitenancy? and if so how this is achieved?
    I would like to monitor/managed multiple customers who may have overlapping private IP subnets
    Thanks

    Hi,
    With CPI v2.0 there is a multi-customer license:
    "L-PI2X-MSP-1 Cisco Prime Infrastructure 2.x Multicustomer 1 Customer RTU"
    What is this license intended for?
    Is it safe to assume that CPI v2.0 also does not support multi tenancy?
    Then there is CPI v2.0 for Service Providers.
    "R-PI2X-SP-K9 Cisco Prime Infrastructure 2.x Service Provider"
    Is this version multi tenant capable?
    What is the difference between the two?
    Thanks.

  • Cisco Prime Infrastructure 2.1 - WS-C2940-8TF-S and WS-C2940-8TT-S supported ?

    Hello community,
    I've got a question just to play safe.
    I'm running a Cisco Prime Infrastructure 2.1, we still do have a bunch of WS-C2940-8TF-S and WS-C2940-8TT-S with running images 12.1(22)EA12 , 12.1(22)EA13 and 12.1(22)EA14.
    I know these switch types already have a End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 2940-8TT-S and 2940-8TF-S Compact Switches ("http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2940-series-switches/end_of_life_notice_c51-510224.html").
    The inventory collection status in the device work Center is for these switch types "Collection Failure", the error message is this one:
    An unexpected error has occurred:
    # Check the device is in supported device list in deployment guide -> not listed in "http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43885"
    # Check there is connectivity between the device and PI -> Checked adnd OK
    # Check the device credentials provided are valid -> Checked adnd OK
    # Finally if the problem still persists then contact Cisco System's technical assistance center -> not done yet, looks like these switch types are not supported any more in PI 2.1 ?
    Can anyone confirm this or answer back because these switch types are supported in her/his PI2.1 installation?
    Best regards
    Bastian

    Prime Infrastructure won't support those legacy models.

  • Do we support Cisco Prime Infrastructure in Windows Platform?

    Do we support Cisco Prime Infrastructure in Windows Platform?

    PI 1.2 needs to run on either a Cisco physical appliance or VMware ESX/ESXi 4.1 or 5.0. It's RHEL-based under the covers.
    Unlike LMS, you can't install it on a windows server, either physical or virtualized.
    For more details check:
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/quickstart/guide/cpi_qsg.html#wp46865

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Cisco Prime Infrastructure 1.3 - SNMPv3 can´t get CPU, memory info.

    Hi,
    I have a Cisco Prime Infrastructure 1.3 deployment with Catalyst 2960S switches. Switches are running IOS 15.0(2) SE2. All switches have SNMPv2 configured, and all appears to be fine. I'm migrating one switch to SNMPv3, and PI have reachability to the switch, but PI doesn´t receive traps from the switch, and neither poll CPU and memory information (all displays 0.00%).
    Somebody have a sample configuration of SNMPv3 with Cisco Prime (Infrastructure or LMS)? I cannot find a Cisco official (or unofficial) document related to this version, usually all mention SNMPv2.
    Thank you.
    Eduardo

    Hi Eduardo:
    SNMPv3 is indeed supported for general administration.  There's a bug with SWIM using SNMPv3 (CSCud92758), but you should be fine for just monitoring.  Have you deleted the switch, waited until Prime Infrastructure told you it was gone, then readded it as SNMPv3 natively?  Bug CSCug78869 keeps things from working well when changing SNMP versions. 
    If you don't have the new Update-1 patch for Prime Infrastructure 1.3.0.20 installed (filename PI_1.3.0.20_Update_1-12.tar.gz) installed, I'd suggest you get it.  While it's not going to specifically address this issue, there are a lot of really good fixes in it.
    Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20

  • Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

    I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs? 

    The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
    Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

  • A job in Cisco Prime Infrastructure 2.1 has been running for 50 days

    I found a job (SAM_Poller_22_15_GETVPNPoller_1878262177) in cisco prime infrastructure 2.1 (Administration -> Job Dashboard -> System-defined), which has been running for about 50 days. Is this normal? How can I stop it? Thanks for any help..
    SAM_Poller_22_15_GETVPNPoller_1878262177
    PollerJob
    In-Progress
    Running
    2014-09-19 01:28
    49 Days 01 : 28 : 37

    Not normal, seems to be stuck. Try to stop (ncs stop) and start (ncs start) the system processes, which should stop this job.
    If it happens again, i would recommend to open a TAC case for further investigation.
    -Thanks
    Vinod

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • Can't import images in cisco prime infrastructure 1.2

    - Any job , trying to import images, in my cisco prime infrastructure fails with :
    Jan 14 13:14:53 cisco-prime  01/14/13 13:15:18.040 ERROR [service] [pool-4-thread-19] IFM_SWIM_EXCEPTION: [com.cisco.ifm.swim.service.exception.IfmSwimParserException: Cannot populate software image info object from the image.]
                       How I can I solve this one ?
    Tx,
    M.

    I seem to have the same problem, strangely enough importing a universal image for 2960s worked fine, but I get thos error when trying to import a 3750x image

Maybe you are looking for

  • Error while using PDF generator Watch folder process

    Hi.. following error happened while converting .doc document to PDF. Failure Time----Thu Feb 12 11:43:41 CET 2009 source location ---- Reason of failure is-----Invocation error. Invocation error. ALC-PDG-001-000-Fehler bei der Konvertierung wegen ein

  • Compressor crash when trying to send a task with watermark

    Hello, I use Compressor without problem except when i try to add a watermark on my movie. It crash without sending the job. My watermark is a TGA file with an alpha channel. I haven't find any solution until now... Thank you for your help.

  • Automatically add line-items to sales orders

    Hello, Our client needs us to add line items to sales orders. The requirement is such that, when the users enter a material on a line item, they wish to see few more materials automatically added as new line items -- item category to be maintained as

  • Managing Apps in the cloud?

    I can see many Apps in the Itunes Store. I have hidden the ones that I don;t use. There is a download option as well. WHat am I supposed to do with these apps? Download them, hide them?, I can't seem to arrange my screens any longer.

  • Products from SRM to CCM

    HI, ALL while I do the case about the products in SRM transfer to CCM. (they are not one client) ,   I configured the XI according to the cook-book.  then  I run the repport BBP_CCM_TRANSFER_CATALOG  in SRM by SE38.  after running , the log show ever