Is CJC accomplished automatically when using MAX to create virtual Thermocouple Channels?

"I have a SCXI 1000 chassis, a SCXI 1102 module and a TC 2095 terminal block. I am configuring virtual channels with the names TC(n) where n is the channel number. When I configure the virtual channel, I am selecting 'built-in' CJC. The question I have is:
When I reference the virtual channel from my DAQ application, is the data I receive already cold-junction-compensated, or do I have to read the CJC voltage as a separate channel, and apply the correction factor manually on my block diagram (like we had to do in the old days)?
I gather that the data that I read, which is obviously scaled to engineering units, is, indeed, cold-junction compensated, but I would like to be certain
that that is the case. Thanks."

Wes;
You are right in your considerations.
If you select the built in CJC when setting a virtual channel up, the CJC will be automaticaly inserted in the channel reading when using that virtual channel.
Regards.
Filipe

Similar Messages

  • Error -201342 "Unsupport​ed Accessory" when using MAX to create tasks PXIe-4330 & TB-4330.

    Hi all!
    I have an -18 slot PXI chassis with multiple PXIe-4330 and TB-4330 installed.   When attaching any TB-4330 to the -4330 module within slot 11 and generating a task within MAX, the system returns the following error: "-201342, unsupported accessory". Any task can read all other slots without generating an error.
    I don't expect this to be SN based as the TB is interchangable with -4330s in other slots though MAX will not allow me to add a TB-4330 to the configuration.
    How can i help MAX see the TB-4330 within slot 11?  Is there a driver update that corrects this?
    Thank you!

    Hi Mlvca,
    Our support team is currently working on this issue. If there are any other suggestions, please feel free to post.
    Sunaina K.
    Product Manager
    Embedded Systems

  • How can I make the status bar hide automatically when using safari?

    How can I make the status bar hide automatically when using safari?

    When Safari is in FullScreen mode, menu bar will be hidden.
    Safari window to fit the screen?
    Move the mouse pointer to the bottom right corner of the Safari window.
    Double arrows will appear. Drag it to resize the window to fit the screen.

  • Cube Solve Time when using MAX Aggregation Operator

    Hello,
    We have created a cube to implement the count distinct measure we need.
    The cube contains only one measure (COUNT) and uses the MAX operator to aggregate across all other dimensions except for the one we want to count (which uses the SUM operator). We have set the precompute percent to 60% for the bottom partition and 0% for the top partition. The cube is compressed.
    The problem is that the SOLVE step for a partition when performing a COMPLETE cube build, seems to be taking a very long time and is taking up huge amounts of TEMPORARY tablespace.
    We have succesfully created another cube with the same dataset which uses the SUM operator across all dimensions.
    This cube build was completed in a reasonable amount of time even though we had 5 stored measures and 80% aggregation for the top partition.
    Is this behaviour expected when using MAX operator?
    Thank you,
    Vicky

    Thank you, David.
    As you said we are using mixed operators because we are doing a distinct count.
    We will try setting the precompute percent to 35%,although I'm a bit worried about the query performance in this case.
    Neelesh, I think that Atomic Refresh was set to TRUE during the last refresh but the cube was the only object in the build script.
    No other cubes or dimensions were maintained in the same build so I don't think it could have affected the use of TEMP tablespace.
    Generally we don't use Atomic Refresh.
    Thank you,
    Vicky

  • Get ora-00119 erro when using DBCA to create database?

    Hi, friends:
    when using DBCA to create database, after finishing all steps and let DBCA to create database automatically, bump into an error:
    ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132:syntax error or unresolved network name 'LISTENER_mysid'
    ORA-01078: failure in processing system parameter
    this is 10.2.0.3 version oracle, the server is sun10, no other instace created yet.
    just Oracle software installed.
    Can any friends help?
    thanks a lot in advance!

    See on metalink:
    ORA-119, ORA-132 ORA-1078 Received From DBCA After Applying 10.2.0.3 Patchset
    Doc ID: Note:433817.1
    There's an entry LOCAL_LISTENER created in pfile/spfile, that's a bug.
    Werner

  • When using Pages to create an EPUB file, how would I force a page brake?

    when using Pages to create an EPUB file, how would I force a page brake?

    Sory Peter but you don't seem to understand.
    If you pick up an e-book by random on the iBook Store, you will see that professional e-books ALWAYS start their chapters at the top of a new page, whatever the reader, the color of the page or the size of the text are.
    I know how to add a new chapter with the use of the appropriate style in Pages but I want to be able to divide SECTIONS as well.
    What I want to to do is to force a page break in between two paragraphs and apparently, this option is not possible with Pages.
    Rémy.

  • Create delivery automatically when sales order is created but not invoice??

    Hi,
    I have a requirement where in, it should create delivery (also issue) automatically when i create sales order, but it should not create the invoice automatically. I am going to do the invoice manually from the delivery document. Can you suggest me how to do this??
    Thanks
    Ghanesh

    Hi,
      If the sales document type is not relavant for Cash sale and the document type is used globally in the business then if for some specific conditions like distribution channel or plant or for division if u want to carry out the immediate delivery creation and PGI, use the below user exits and Bapi's
    The below user exit is used to export the sales order details to capture the required checking cond such as sal org,dist ch,div,plant,etc
    Include MV45AFZZ
    FORM USEREXIT_SAVE_DOCUMENT.
    Include MV45AFZA
    FORM -USEREXIT_REFRESH_DOCUMENT.
    BAPI_ISAORDER_GETDETAILEDLIST
    BAPI_OUTB_DELIVERY_CREATE_SLS
    SD_DELIVERY_UPDATE_PICKING
    BAPI_OUB_DELIVERY_CONFIRM_DEC
    Regards,
    Gopal.

  • Missing Search Field when using 3.1 Create App Wizard ?

    Hi
    2 points which look like bugs to me;
    1 - In all previous versions whenever I used the create app wizard to build up a list of pages, reports always included the 'search across any varchar field' funtionality. This seems to have disappeared when using the Classic form of reports. It is obviously there if you use an Interactive report.
    2 - Again when using the Create App wizard, if I use the Classic form (in order to be able to also 'Generate Analysis Pages') these do get built, but not linked in any way (tab, list region, button etc) to any other pages. I can link them myself, but I am demonstrating APEX here and it doesn't look so good....
    Can someone just quickly confirm I am not going mad here ?
    Jules

    Hi Jules,
    You're not going mad! I've reviewed the behaviour of the Search field and the Analysis Pages link using releases 3.0.1 and 3.1.1, and there is a difference in behaviour between the two versions.
    Classic Reports generated via the Create Application Wizard in 3.1.1 should have a Search text field above the report region, however this field is missing. I've logged bug 7185486 for this issue. Classic Report&Forms generated via the Create Application Wizard, with the "Include Analysis Pages" option selected, are missing a link to the Analysis pages in 3.1.1. I've logged bug 7185486 for this issue. I've updated both bugs with a workaround. A fix for these issues will be available in a future release. Thanks for bringing these two issues to our attention.
    Regards,
    Hilary

  • ORA-06502 When using MAX(Column) with %TYPE

    Hi Guys,
    Just had this discussion on the main database forums, and the problem was somewhat resolved. But they did ask me to check here if this was a known issue.
    Assuming I have a table defined as follows
    CREATE TABLE TEST_TABLE (TEST_COLUMN CHAR(8 BYTE)) ;and the table only has a single record NZ07100S
    We also define a function as
    CREATE OR REPLACE FUNCTION
    FUNCTION GETTESTVALUE
    RETURN TEST_TABLE.TEST_COLUMN%TYPE
    IS
    TEST_VALUE TEST_TABLE.TEST_COLUMN%TYPE;
    BEGIN
    SELECT MAX(TEST_COLUMN) INTO TEST_VALUE FROM TEST_TABLE;
    RETURN TEST_VALUE;
    END;We ran the following command
    SELECT GETTESTVALUE FROM DUAL;and receive an error as follows
    Error report:
    SQL Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at "GETTESTVALUE", line 6
    06502. 00000 - "PL/SQL: numeric or value error%s"However, if were to modify the function to the following
    CREATE OR REPLACE FUNCTION
    FUNCTION GETTESTVALUE
    RETURN TEST_TABLE.TEST_COLUMN%TYPE
    IS
    TEST_VALUE TEST_TABLE.TEST_COLUMN%TYPE;
    BEGIN
    SELECT TEST_COLUMN INTO TEST_VALUE FROM TEST_TABLE;
    RETURN TEST_VALUE;
    END;There is no error reported and the value NZ07100S is returned.
    Of course, when we modified the function to be
    CREATE OR REPLACE FUNCTION
    FUNCTION GETTESTVALUE
    RETURN TEST_TABLE.TEST_COLUMN%TYPE
    IS
    TEST_VALUE TEST_TABLE.TEST_COLUMN%TYPE;
    BEGIN
    SELECT CAST(MAX(TEST_COLUMN) AS CHAR(8))INTO TEST_VALUE FROM TEST_TABLE;
    RETURN TEST_VALUE;
    END;No errors are reported, and the value is returned
    Some of the guys in the main forums tried this out on Enterprise edition and did not encounter any issues. To faciliate their testing, I spooled the sqlsplus output and it is as follows
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL> create table test_table (test_column char(8 byte));
    Table created.
    SQL> insert into test_table
      2       values ('NZ07100S');
    1 row created.
    SQL> commit
      2  /
    Commit complete.
    SQL> create or replace function gettestvalue
      2      return test_table.test_column%type
      3  is
      4     test_value   test_table.test_column%type;
      5  begin
      6     select max(test_column) into test_value from test_table;
      7  return test_value;
      8  end;
      9  /
    Function created.
    SQL> select gettestvalue from dual
      2  /
    select gettestvalue from dual
    ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at "JEGA.GETTESTVALUE", line 6
    SQL> spool offAt the request of one of the posters, the following was also executed.
    SQL> select lengthb (TEST_COLUMN)
      2  from test_table
      3  where test_column = 'NZ07100S'
      4  /
    LENGTHB(TEST_COLUMN)
                       8
    SQL> select max (lengthb (test_column))
      2  from test_table
      3  /
    MAX(LENGTHB(TEST_COLUMN))
                            8The eventual solution that made this piece of code work on XE was as follows
    SQL> alter table test_table modify test_column varchar2 (8 byte);
    Table altered.
    SQL> select gettestvalue from dual;
    GETTESTVALUE
    NZ07100S
    SQL> spool off;Now, I can't change the production (Enterprise Edition) schema. The XE is being used by the developers for their local testing. As such, knowing that the problem does not occur on Enterprise, I can ask them to make the changes locally to their XE for their local testing.
    However, I was just wondering, does anyone know if this is a known issue with Oracle XE ??
    Thanks and regards
    Jega

    Hi Jega,
    thank you for your post.
    Don't know is this issue XE release specific issue or 10.2.0.1 generally?
    Anyway, already 10.2.0.3 is patched - as you can see, even selecting from XE through PE102030 working OK:
    SQL> select * from v$version;
    BANNER
    Personal Oracle Database 10g Release 10.2.0.3.0 - Production
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    SQL> CREATE TABLE TEST_TABLE (TEST_COLUMN CHAR(8 BYTE)) ;
    Table created.
    SQL> CREATE OR REPLACE FUNCTION gettestvalue
      2  RETURN TEST_TABLE.TEST_COLUMN%TYPE
      3  IS
      4  TEST_VALUE TEST_TABLE.TEST_COLUMN%TYPE;
      5  BEGIN
      6  SELECT MAX(TEST_COLUMN) INTO TEST_VALUE FROM TEST_TABLE;
      7  RETURN TEST_VALUE;
      8  END;
      9  /
    Function created.
    SQL> insert into test_table
      2   values ('NZ07100S');
    1 row created.
    SQL> SELECT GETTESTVALUE FROM DUAL;
    GETTESTVALUE
    NZ07100S
    SQL> CREATE OR REPLACE FUNCTION gettestvalue_from_xe
      2  RETURN TEST_TABLE.TEST_COLUMN%TYPE
      3  IS
      4  TEST_VALUE TEST_TABLE.TEST_COLUMN%TYPE;
      5  BEGIN
      6  SELECT MAX(TEST_COLUMN) INTO TEST_VALUE FROM HR.TEST_TABLE@XE_LINK;
      7  RETURN TEST_VALUE;
      8  END;
      9  /
      Function created.
    SQL> SELECT GETTESTVALUE_FROM_XE FROM DUAL;
    GETTESTVALUE_FROM_XE
    NZ07100S
    SQL> conn hr/hr_password@xe
    Connected.
    SQL>  SELECT GETTESTVALUE FROM DUAL;
    SELECT GETTESTVALUE FROM DUAL
    ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at "HR.GETTESTVALUE", line 7
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL>Note: XE_LINK is database link pointing from my PE instance to XE instance.

  • Deleting emails automatically when using a POP email

    Hi
    Is there a way of deleting any emails automatically from my POP email when i've deleted them in mail on my iphone 4?
    I have my email set up correctly with push switch to on and everything else seems to sync up fine, but when i log into my webmail account or Outlook on my laptop the emails that i've deleted on my iphone are still listed in the inbox as unread.
    Any ideas anyone?
    G

    There are settings in your mail configuration to delete when ... One option is to say delete when removed from Inbox.
    Thus when you delete it, then the NEXT check of mail it will let the server know to delete them.
    Have to remember, POP was not designed for todays world of mobile devices and checking in multiple places. It was a basic protocol for people to check from one place.
    Consider using IMAP if your service allows it.

  • Debugging mode stopped automatically when using xml file load

    Dear Sir,
    I am trying to develop a new add-on using xml files for creating new forms. In fact I was using the sample code delivered with the SDK ( WorkingWithXml - under VB.NET). The Problem is that when I am in the debuging mode and after the form load. the application goes out of the debugging mode and stop action.
    In fact what i was trying to do first is to create a new menu and then when i click on this menu a new form appear but once the menu is loaded the application stop the debugging mode automatically.
    Can somebody clarify to me what I am doing wrong and why the debugging mode is stopped automatically, noting that i am still in the add-on developpement phase.
    As i mentioned above i used the WorkingWithXml sample code (VB.NET) and i have adjusted in a way to load menu and then on the menu click i load my form.
    Please advice
    Best Regards

    Hi Mary,
    Put your code between in a Try Catch block. In the Catch part use the following:
    oApplication.MessageBox("CompError: " & oCompany.GetLastErrorCode.ToString & ", " & oCompany.GetLastErrorDescription & vbCrLf & "Message: " & ex.Message)
    This should give you a clearer idea of what the error is all about.
    The most likely reason is that there is something wrong with your XML file.
    Regards,
    Vítor Vieira

  • Reader X start automatic when using sendto or print to a physical printer

    Using Win7 x64 and Adobe Reader X 10.1.0
    Adobe Reader is not running by Default. Its the Default PDF Reader.
    When i use right Click Print (and a physical printer as Default printer) or right Click Sendto  with a Printer
    Adobe Reader X Starts up minimized and show me the "welcome" screen with last opend Documents.
    this happens with every printer (virtual and physical)
    Didnt found any solution on this board so far also not via Google
    If i use another PDF Reader like Foxit, this doenst happen. Beside this we dont want to use Foxit but as an test i installed it.
    What can i do to avoid this behaviour?
    Happend so far only with Win7 X64 and Adobe Reader X despite the sub version (also with 10.1.1 at another workplace)

    Using Win7 x64 and Adobe Reader X 10.1.0
    Adobe Reader is not running by Default. Its the Default PDF Reader.
    When i use right Click Print (and a physical printer as Default printer) or right Click Sendto  with a Printer
    Adobe Reader X Starts up minimized and show me the "welcome" screen with last opend Documents.
    this happens with every printer (virtual and physical)
    Didnt found any solution on this board so far also not via Google
    If i use another PDF Reader like Foxit, this doenst happen. Beside this we dont want to use Foxit but as an test i installed it.
    What can i do to avoid this behaviour?
    Happend so far only with Win7 X64 and Adobe Reader X despite the sub version (also with 10.1.1 at another workplace)

  • Imac safari browser shuts down automatically when using Flashplayer. Any fix ?

    safari shuts down automatically in combo with FlashPlayer.  Any fix ?

    You may have a Safari add on installed that's not compatible with Flash. A crash report may reveal what's going on...
    If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
    Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
    Make sure and include the "binary images" section.
    BEFORE you post a crash report, reinstall Safari 5.0.6 for Leopard
    Retart your Mac, try Safari. If it still crashes, then post the report in your reply.

  • When I use MAx to test a digital channel, what circuitry is internal to the SCB-68 or the PCI-6023E such that when I con

    nect a 5V power supply to DGND and intermittantly touch the currnt supply to DIO1 no change occurs, yet if I leave a variable power supply connected to it and change the Dc voltage from 0 to 5 the digital state changes when I cross the 1.5+ Volt threshold?

    nect a 5V power supply to DGND and intermittantly touch the currnt supply to DIO1 no change occurs, yet if I leave a variable power supply connected to it and change the Dc voltage from 0 to 5 the digital state changes when I cross the 1.5+ Volt threshold?The digital lines of the 6023E are TTL logic lines meant to handle voltages. You can consider a digital input to be high impedance, basically accepting little or no current. This would explain why your current supply doesn't cause a change in the digital state. The signal must reach TTL logic levels in order to trigger a change in the digital state.
    TTL logic specifies the low voltage range (0) to be between 0V - 0.8V, and the high voltage range (1) to be between 2V -5V. Anything not in these ranges, for instance 1.5V, will give you an unpredictable result.

  • How do I prevent the volume from increasing automatically when using headphones?

    When I listen to music on iTunes or Pandora (on Chrome browser) through the Apple earbuds, or the Samsung ones that come with Galaxy phones, the volume starts increasing on its own after a short while. Sometimes it takes 5 minutes for this to happen, other times 45 minutes. I'll be alerted that the volume is in
    I have a MacBook Pro (Retina, 15-inch, Mid 2014) running an 2.5 GHz Intel Core i7 with 16 GB of RAM (Standard Configuration) on OSX Yosemite 10.10.3

    OGELTHORPE,
    Thank you for the suggestion. I tried resetting the NVRAM, but the issue persists. I'll keep a close watch on what I'm doing when it happens to see if I can pinpoint the cause.
    Thanks!

Maybe you are looking for