Is Classification of Characteristics and Class possible?

Hi All,
  I want to know about classification of Characteristics and Class. I want to some details about the same.
Thanks in advance for the answer.
Regards
Joy

Hi
Ii will give an example how it is mapped in equipments. suppose you have a group of equipments say pumps and which is of different types it will be mapped as follows
1.Your object part - Pump
2.Class - Centrifugal Pumps
             Submersible pumps
3. Characteristics - Head
                               Flow
                               Efficiency
Hope this is simple & clear
Thanks & Regards
Sijo

Similar Messages

  • Transport Request Creation while creating Characteristics and Classes.

    Hi
    While do a Release Strategy i am creating Characteristics and Classes.
    While saving Characteristics and Classes, i am not getting any Transport Request Creation.
    Is there any problem with my configuration or the Standard SAP does not give me.
    I want to track all the things i am doing.
    Reply me ASAP
    cheers
    MaruthiRam
    Edited by: MARUTHI RAM on Jul 17, 2008 9:43 PM
    Edited by: MARUTHI RAM on Jul 17, 2008 9:44 PM

    Characteristics and class are master data so system will not ask for transport.
    if you want to migrate to another system than you have to create the LSMW (upload program)
    using this you can upload all the char value into release strategy in wach client
    now if you are migrating the whole client than system will copy the class and char along with release strategy but not value.
    to upload the char value of release strategy
    use LSMW with std  object 0130.

  • BAPI for characteristics and classes

    Hi all,
    I need to upload classifications, characteristics and characteristics value
    and classes to the master and also need to extract the same from the material master..
    Can any one of you suggest me any BAPI of function module or any othe way so as to implement the above requirement..
    Useful answers will be rewarded..
    Thanks in advance..
    Arun

    Hi,
    Check all,
    BAPI_CLASS_ALLOC_GLOB_DEP BAPI: Assign Global Dependencies to Class
    BAPI_CLASS_CHANGE BAPI: Change Class
    BAPI_CLASS_CHARVALUE_DEL_DEP Class BAPI: Delete Local / Global Dependencies for Characteristic Valu
    BAPI_CLASS_CHARVALUE_GLOB_DEP Class BAPI: Assign Global Dependencies to Characteristic Value
    BAPI_CLASS_CHARVALUE_LOCAL_DEP Class BAPI: Maintain Local Dependency for Characteristic Value
    BAPI_CLASS_CHARVALUE_READ_ALLO Class BAPI: Read Dependencies for Characteristic Value
    BAPI_CLASS_CHAR_ALLOC_GLOB_DEP Class BAPI: Global Dependencies for Characteristic
    BAPI_CLASS_CHAR_DELETE_DEP Class BAPI: Delete Global / Local Dependency for Characteristic
    BAPI_CLASS_CHAR_LOCAL_DEP Class BAPI: Assign / Delete Local Dependency for Characteristic
    BAPI_CLASS_CHAR_READ_ALLOC Class BAPI: Read Dependencies for Characteristic
    BAPI_CLASS_CHAR_VALUE_TEXT_DEL Class BAPI: Delete Overwriting of Long Text for Characteristic or Value
    BAPI_CLASS_CHAR_VALUE_TEXT_OVR Class BAPI: Overwriting of Long Text for Characteristic or Value
    Reward if useful!

  • Reg. Characteristics and Class for PO release stretagy

    Dear Experts
    We want to release PO, what should be the Characteristic and Class, how to create the both. Pls advise the required table and class name.
    Thanks
    Rajakumar

    hi,
    Characteristics are the criteria for a release condition. If the criteria of a release condition are satisfied, the associated release strategy is assigned to the purchasing document like PURCHASE ORDER.
    you can find it under menu path:
    SPRO > MATERIAL MANAGEMENT > PURCHASING > PURCHASE ORDER > RELEASE PROCEDURE FOR PURCHASE ORDER > EDIT CHARACTERISTIC.
    you can create charateristic based on plant,document type,value,purchase group.
    In the basic data screen we have to enter the following inputs.
    1DESCRIPTION                     PLANT
    2STATUS                                     RELEASED
    3DATA TYPE                     CHARACTER FORMAT
    4NUMBER OF CHARACTER     4
    5VALUE ASSIGNMENT     MULTIPLE VALUES
    In the description screen we have to enter the language and description
    In the restrictions screen we have to enter the class type.
    Class type is the top-level unit of control for classes
    The class type is used to define a number of parameters, such as:
    u2022     The objects that can be classified in a class.
    u2022     Whether objects of different object types can be classified in the same class.
    u2022     Whether an object can be classified in more than one class of the same class type.
    u2022     The class maintenance screens that can be processed.
    Each class must be assigned to exactly one class type. There is no connection between the individual class types.
    In the restriction screen we have to enter class type u201C032u201D.
    We use a class to group together characteristics that are to constitute a release condition for a release strategy. In this step we assign this class to the release strategy.
    menu path is : SPRO > MATERIAL MANAGEMENT > PURCHASE ORDER > RELEASE PROCEDURE FOR PURCHASE ORDER > EDIT CLASS
    there should be only one class for all the release procedure.
    for po the table is cekko and for pr it is ceban
    jash

  • Characteristics and Classes EMR

    Hello, can someone explain the major benefits of using classes and characteristics on equipment master records please?
    Thank youu

    hi,
    You need to setup Customer Distribution Model (BD64) and Partner Profiles in DEV (Outbound) and QA (Inbound) systems with ALE Port. Then run the transactions BD91, BD92 and BD93 in DEV. If the partner profile in DEV is setup to transfer immediately, IDOCs will be transferred to QA.
    Regards,
    manish

  • Batch Management and Class and Characteristics Assignment

    Dear Team,
    Recently We Configured Batch Management in SD, and Batch is determining in Sales order, delivery and Billing. Its working fine.
    Issue-1: While posting stock (Quality server) with moment type 561, production date entered manually but system not calculating Expiry date automatically, i maintained Total shelf Time and Min. Rem. Shelf time.
    Issue-2: In sales order I want determine batch as FIFO Method, in present system it will consider LIFO method,
    I come to know to over come this Issues i need to maintain some Characteristics and Class, Please help me out in creating of characteristics and class and other process,
    Thanking you in advance,
    Sudheer.U

    Dear Team,
    Recently We Configured Batch Management in SD, and Batch is determining in Sales order, delivery and Billing. Its working fine.
    Issue-1: While posting stock (Quality server) with moment type 561, production date entered manually but system not calculating Expiry date automatically, i maintained Total shelf Time and Min. Rem. Shelf time.
    Issue-2: In sales order I want determine batch as FIFO Method, in present system it will consider LIFO method,
    I come to know to over come this Issues i need to maintain some Characteristics and Class, Please help me out in creating of characteristics and class and other process,
    Thanking you in advance,
    Sudheer.U

  • Characteristics for class type 001 and class 59111 - Message Re-phrased

    Hi All,
    Let me put in better words.
    The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
    The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
    Does anyone know how to fetch the characteristics on this particular case?
    Thanks
    Rajesh.
    Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PM

    Hi Sylendra,
    Thanks for looking into it and replying with your thoughts.
    What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
    But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics  that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
    The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
    Thanks
    Rajesh.

  • How to find objects and classes

    hi
    any notes or path on objects and classes on crm?

    Hi Kumara
    I beleive your talking about the Classification system.
    To get to this go here: SPRO->IMG->Cross-Application Components - -> Classification System - -> Classes - -> Maintain Object Keys
    This will give a list of Tables which are currently set with Object Keys, you may need to add a new table and configure.
    Next
    To get to this go here: SPRO->IMG->Cross-Application Components - -> Classification System - -> Classes - -> Maintain Object Types and Class Types
    Here you assign a Class Type to Link your Table from the previous step, this class new Class Type will be used with a New Class to created in the following steps.
    Goto Transaction CT04 - Create Characteristics
    Here you create effectively attributes of a Class (Fields)
    Goto Transaction CL01 - Create New Class
                              or CL02 - Maintain Class
    Create a new class linked to your Class Type from previous steps
    On the Char.. Tab you can add the new Characteristics created in the previous step to your new Class.
    Based on the Object Key from the first step, these new attributes shoulds all now link together. If the key is of type 'RAW'  (Binary) it may not be possible to link correctly, therefore some ABAP maybe required to create the link, depending on your application.
    Hope this helps.
    <b>Reward with points if useful.</b>
    Regards
    Arden

  • How to find classtype and class for a material.

    Hi,
    How to find classtype and class for a material.
    which table contains this data.
    Thanks
    Kiran

    Hi Kiran,
    Check below sample code. Use this BAPI which will give all info about the class for the material.
      DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                         VALUE IS INITIAL.
      CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                         VALUE 'MARA',
                 lc_classtype_imp   TYPE bapi1003_key-classtype
                                         VALUE '001',
                 lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                         VALUE 'FREIGHT_CLASS',
                 lc_e               TYPE bapiret2-type VALUE 'E',
                 lc_p(1)            TYPE c             VALUE 'P',
                 lc_m(1)            TYPE c             VALUE 'M'.
      SORT i_deliverydata BY vbeln posnr matnr.
      CLEAR wa_deliverydata.
      LOOP AT i_deliverydata INTO wa_deliverydata.
        REFRESH: i_alloclist[],
                 i_return[].
        CLEAR:   l_objectkey_imp.
        l_objectkey_imp = wa_deliverydata-matnr.
    *Get classes and characteristics
        CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
          EXPORTING
            objectkey_imp         = l_objectkey_imp
            objecttable_imp       = lc_objecttable_imp
            classtype_imp         = lc_classtype_imp
    *   READ_VALUATIONS       =
            keydate               = sy-datum
            language              = sy-langu
          TABLES
            alloclist             = i_alloclist
    *   ALLOCVALUESCHAR       =
    *   ALLOCVALUESCURR       =
    *   ALLOCVALUESNUM        =
            return                = i_return
    Thanks,
    Vinod.

  • Help required: Classes and class values for Func Loc

    Dear All,
    I have a requirement to get the classes and values associated with a functional location.
    Any idea how to get this data, as in IL03.
    Thanks,
    nsp.

    Hello nsp,
    You can try to check out the Function module ALM_ME_TOB_CLASSES to see how they fetched class, characteristics and their values.
    You can keep a break-point in this module and run MAM30_031_GETDETAIL and check how we can pass the appropriate values.
    However, above FMs are available from PI 2004.1 SP 14 of release 4.6c, 4.7 and 5.0.
    If you are in ERP 6.0, the FM's are available.
    Hope this helps
    Best Regards,
    Subhakanth

  • How to get ATINN value based on material number and Class Type ?

    I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
    However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
    So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
    -Obtain the batch characterstic value for the Material******************
      SELECT atwrt
        UP TO 1 ROWS
        INTO v_charvalue
        FROM ausp
       WHERE objek = mcha-matnr
         AND atinn = '0000000381'   " 'US80_FRENCH_ON_LABEL'
         AND klart = '001'.
    THANKS N ADVANCE.

    Hi SAm,
    use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
          EXPORTING
            classtype          = '023'       "Class type
            object             = w_object  "Material number with Leading zeros
            no_value_descript  = 'X'      "Default X
            objecttable        = 'MCH1'    "Table name Mara or MCH1 or MARC
          TABLES
            t_class            = t_class   "It return the Batch class available for the above combination
            t_objectdata       = t_char  "Return Batch characteristics(ATWRT) and their value ATINN in this table
          EXCEPTIONS
            no_classification  = 1
            no_classtypes      = 2
            invalid_class_type = 3
            OTHERS             = 4.
    Regards,
    Prabhudas

  • From which table I can find the "Class type" and "Class" of the material?

    From which table I can find the "Class type" and "Class" of the material?
    Thanks in advance for the answers....

    Hi,
    try following table
    KSSK     Material number to class     
    KLAS     Class description     
    KSML     Characteristic name     
    CABN/CABNT     Characteristic name description     
    CAWN/CAWNT     Characteristic name
    [http://www.sap-img.com/materials/classification-view-of-material-master.htm]
    [http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
    Regards
    kailas Ugale

  • Mass upload of characteristics and long text for Object Links in DIR

    hello all
    I want to upload characteristics and long text of Linked Objects in Documents: i wanted to use BAPI_OBJCL_CHANGE and family but, it is a class that is on a different level than the DIR as it does not belong to the DIR directly, but to objects that are linked TO the dir, via the tab linked object.
    any idea on how I can do that?
    LSMW and recordings do not work (or at least I did not find a way to make them work);
    have you encountered such a situation?
    thanks

    Dear,
    After call BAPI call also
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING wait = 'X'.
    Please refer this thread also,
    BAPI_OBJCL_CHANGE.
    Regards,
    R.Brahmankar

  • Java-JSP working with packages and classes

    Hi everybody,
    I'm bearly new on Java-JSP developping and I wanted to know how Tomcat (for example) manage the imported packages and classes.
    The fact is I'm working on a project ('/bob') which use some packages that I don't see in the '/bob' directory. So, is that possible that '/bob' is downloading packages and classes from Internet to '/bob/download' virtual repertory and use it? If it is true, is it possible to override this download by making '/bob' project using local packages or classes (example : com.boblibrary.classes.util in '/bob/WEB-INF/classes/com/boblibrary/classes/util') instead of downloading it?
    Therefore, the '/bob' project is using bugged classes (that I think it downloads from Internet) which I can't correct.
    Thanks for your help.
    - Renaud

    Thank you for your answer, but I can't imagine where is physicaly the class that my project use and show me as http://localhost:8080/atlassian-jira-3.13.2/download/ressources/br.com.ecore.jira.plugin.projectViewPlugin:ProjectViewTabPanel/js/projectviewtabpanel.js. Where is that Javascript file suppose to be on my hard drive? Or where is that class 'br.com.ecore.jira.plugin.projectViewPlugin' suppose to be on my hard drive? If it is not dowloaded from the Internet.
    I have no trace of that class on 'atlassian-jira-3.13.2/', neither on 'jdk1.6.0_18/', 'jre6/' or 'apache-tomcat-5.5.28/common/classes/'.
    Thanks.

  • Available characteristics and key figures in drilldown reports

    Hi,
    I'm wondering which table /structure defines what characteristics and key figures are available for drilldown reports (eg. G/L), and if it is possible to add new chars/key figs.
    I reckon there must be a structure resembling Report Painter libraries, where you can select fields from a reporting table. I just can't find that structure anywhere.
    Any help is appreciated.
    Best regards,
    Jarkko Kuusisto

    For GL the menu path is Financial accounting-general ledger accounting-G/L accounts-Line items-line item display.
    Here you select the way the line item display is set up. Also you can select the fields you want and additional fields as well. Some tcodes range from O7F1 and O7FE.
    This varies by module but is generally in the line item or information systems section in configuration.
    Go to GR21 and drop down the tables and you can see all the tables availble for report painter.
    You can add tables to report painter in sm30 in table T804A. That makes it availble for report painter.
    please assign points. It is appreciated.

Maybe you are looking for