Is Cleartype able to support both RGB and BGR sub pixel panel displays at the same time?

Hi,
I am using 2 27' LED displays on my PC. One has RGB sub pixel, the other has BGR sub pixel.
I have problem to tune the font using Cleartype. I have tried to tune all displays a few times and always get the following result.
If I use the RGB one as the primary display, the font on the RGB display looks ok but the font on the BGR display looks weird after tuning using cleartype.
If I use the BGR display as the primary, the font on the BGR display looks ok but the font on the RGB display looks weird after tuning using cleartype.
Basicly, the after tuning with Cleartype, the font on the Primary display looks good but on the other looks weird.
I have also tested with single display setup. i.e. connect only the RGB sub pixel display or the
BGR sub pixel display.
ClearType tuning works well for single display setup no matter which display I have connected.
But once I connect the 2nd display and tune using Cleartype, the font on the Primary display looks good but on the other looks weird. (The same as above)
To be more specific, the RGB display is Philips 278C4 (connect using HDMI), the BGR display is Dell P2714H (connect using DisplayPort. I have also tried DVI. DisplayPort or DVI give same result).
My system is Win 8.1 Pro x64 JA-JP with all latest patches installed, and my graphic card is nVidia GTX 760, with the latest driver installed.
I suspect this is due to one display has RGB sub pixel panel, and the other has BGR sub pixel panel, which means
Windows ClearType need to take care both RGB and BGR for at the same time. I am not sure if this is fully supported by Windows 8.1 ClearType.
Is there any solution or workaround to make the font on both displays looks nice?
Thanks.

Hi,
Windows includes several technologies to render text on the screen. These include Windows GDI, Direct Write and Windows Presentation Foundation.
Windows GDI is limited to using one set of ClearType settings per system
while the other two support different settings per display.
It depends. Most LCD screens have a RGB striping order. A very small number have a striping order of BGR.
For more question, refer to this link:
ClearType FAQ
http://www.microsoft.com/typography/ClearTypeFAQ.mspx
Kate Li
TechNet Community Support

Similar Messages

  • I recently bought a 4th generation ipod shuffle.  Am I able to have both music and audio podcasts loaded on it at the same time?

    I have not been able to include both music and audio podcasts on my shuffle at the same time. Is this possible with the shuffle?

    I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

  • How can I verify credit of an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    How can I verify credit for an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
    If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • How to open and save pictures from 1 folder at the same time?

    Is there a way to open and save pictures from 1 folder at the same time?
    I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
    greetings!

    Hi Kway,
    Here you are. I wrote a file a customer times ago & It did what you want!
    Just see the attachements and keep me inform.
    Regards,
    Julien Roland - District Sales Manager
    NI Belgium - Technical Support
    Don't forget to rate a good answer
    Attachments:
    Test existing Files.vi ‏23 KB
    Delete files from array of files (SubVI).vi ‏16 KB

  • How can i connect to a LAN and external display at the same time using the mini-displayport?

    Hi all,
    At work i'm connected to the Lan via an adapter and the mini displayport. I want to use my external display at the same time, which use the same mini displayport. Are there any splitters available to use both at the same time? Are there any other alternatives?
    Thanks,
    Dennis

    There are USB to ethernet dongles:
    http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?afid=p219 %7CGOUS&cid=AOS-US-KWG-PLA

  • How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

    How can I record an Audio Instrument, and listen to a reference track at the same time?

    Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
    If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
    Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

  • In windows how do we install and activite multiple versions of tuxedo at the same time ?

    Hi All,
    In windows how do we install and activate multiple versions of tuxedo at the same time ?
    Advance wishes

    You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
    See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
    You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
    applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
    Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
    machine in separate directories. For example:
    On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
    On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
    E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

  • HT1442 install and run mac os 10.4 at the same time mountain lion 10.8

    nstall and run mac os 10.4 at the same time mountain lion 10.8

    I was able to install Intel Tiger into VMWare Fusion 2.0; I was never successful at installing it in VMWare Fusion 4.
    If you have had success in version 4, please let us know how to do it!  Thanks!

  • Remote and direct update of master data at the same time

    Hello
    Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
    Thanks

    Hi,
    What do you mean by Remote Update ?
    regards
    Happy Tony

  • Is it possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time?

    I've always used PC and I'm planning on making the transition to Mac.  That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presentations at the same time. Is that true?  I'm a speaker and that was the main reason I was considering buying an iPad, so I didn't have to carry my laptop. Thanks for your help!

    Thanks for your reply. Looks like it can as I have just found this https://www.youtube.com/watch?v=nKp02y4JXVs

  • Error : Old and new exceptions cannot be used at the same time.

    HI ALL,
    i build a new exception class with message class and i want to replace the
    old exception that i had in the method ,what i did is delete the exception from the method
    signature and add the exception class .
    the problem is that when i try to activate the method i get error :
    Old and new exceptions cannot be used at the same time.
    CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
          EXPORTING
            alg            = 'MD5'
            data           = iv_iss
          IMPORTING
            hash           = lv_issu
          EXCEPTIONS
            unknown_alg    = 1
            param_error    = 2
            internal_error = 3
            OTHERS         = 4.
        IF sy-subrc <> 0.
          RAISE EXCEPTION TYPE cx_user_mng EXPORTING
          textid = cx_user_mng=>wrong_isrs.
        ENDIF.
    I want to use the new exception class ,
    how can i avoid this error ?
    Best Regards
    Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
    Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

    Hi Joy,
    Check this link.
    [Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
    Old and new exceptions cannot be used the same time, what does this mean???
    Regards,
    Lakshman.

  • If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

    If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

    That's not what home sharing is for or how it works.
    You want the remote app.

  • When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    Have you ever even used skype on an iphone or ipod?  We tried it and there is no way to type to each other while you are video chatting.  You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

  • WRT160 doesn't seem to be able to support both PC and Apple devices on at the same time

    we have 2 PCs, a macbook and an iphone. we use a cable modem with the WRT160 router. since thursday the 2 PCs can connect to the internet at the same time, but the mac then loses its connection as does the iphone. if the mac and iphone are connected, the minute we start up a PC, the mac and iphone lose their connection and can't reconnect. Apple couldn't help and said it was the router. Anyone have any ideas on what the problem is and how to fix it?

    Open the router setup page and reduce the MTU to1400 and click save settings..Under the Wireless tab,Click on the subtab Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Now,check..

Maybe you are looking for