Is Coldfusion 10 supported on HP-UX

Hi ,
I am not able to find HP-UX on the support matrix for CF10.
Is it supported ?

Hi Anantha, thanks, HP-UX v11i v2 either is good for me, i got it:
Item Requirement
Operating system Operating system version:
HP-UX 11i v2 (11.23)
Thank you!!!
Edited by: user4559931 on 6/08/2009 08:12 AM

Similar Messages

  • Where is the ColdFusion support?

    I have been trying to edit existing ColdFusion files now that I am signed up to Creative Cloud. Dreamweaver CC has had all ColdFusion support removed. Even opening a ColdFusion file is annoying. I can only open it by right clicking in Finder. Checking "always open with" does not work.
    The solutions on the DreamWeaver team blog were to install ColdFusion Builder, not included in Creative Cloud, or to install Dreamweaver CS6, no longer an option in Creative Cloud.
    I assume that this is the end of ColdFusion as far as Adobe is concerned. Mind you I assume they also think that ASP and ASP.Net are no longer valid as they are no longer supported either.

    Let me preface my comments by stating I do not work for Adobe, and I don't speak for Adobe.  These are just my thoughts and opinions.
    I believe that Adobe looked at what they felt the majority of Dreamweaver users were doing with the product, and determined only a small majority were using it for ColdFusion or ASP/ASP.net, while a large portion of the user base used it for PHP.  It's probable that the majority of ASP.net developers are using an IDE for their work, and Dreamweaver is not an IDE.  Similarly, they probably felt only a minority of ColdFusion developers were using Dreamweaver (I know a few personally who do, and I used to be one of them).  However, since Adobe's ColdFusion team has developed an IDE specific to ColdFusion (ColdFusion Builder), it makes economic sense for them to no longer carry the weight of ColdFusion support in the Dreamweaver product.  ColdFusion Builder releases are directly tied to and in sync with ColdFusion releases while Dreameaver CC is not, which makes maintaining support for new releases of ColdFusion in Dreamweaver CC another headache.
    ColdFusion support has not been completely stripped from Dreamweaver (yet), though.  There are a some blog posts out there from Adobe and others that show how to get the ColdFusion support working fairly close to how it did in previous versions of Dreamweaver.
    Also, many ColdFusion developers have started using more lightweight 3rd party code/text editing tools with ColdFusion language libraries added on, such as SublimeText, Brackets/Adobe Edge Code, TextMate, Notepad++, and others.
    -Carl V.

  • Links not Working on ColdFusion Support Center

    Does anyone know why none of the links to the articles here are not working?  http://www.adobe.com/support/coldfusion/security.html
    For example... the article... Top Five ColdFusion Security Issues
    http://www.adobe.com/devnet/server_archive/articles/top5_cf_security_issues.html
    This is also true of the TechNotes
    Thanks.

    Hi,
    Thank you for letting us know. We are checking these.
    Regards,
    Anit Kumar

  • Why isn't ColdFusion supported in Dreamweaver CC anymore?

    For some reason Adobe is no longer supporting ColdFusion in the new Dreamweaver CC 2014. CF comments are no longer are highlighted in the code view. In fact CF is not listed among applications, although PHP is. Is Adobe planning on abandoning CF?

    Ben Forta wrote a post on his blog last year about the changes to Coldfusion and Dreamweaver.
    You can see it here - http://forta.com/blog/index.cfm/2013/6/30/On-Dreamweaver-CC-And-ColdFusion
    The main reason seems to be Coldfusion Builder and moving Dreamweaver to do the "client side" aspect of development.

  • Missing ColdFusion Support in Dreamweaver

    I can't say it enough and will continue to post until someone at Adobe listens.
    What Adobe has done is blindly pull the rug right out from under our feet by deprecating support for ColdFusion in Dreamweaver. Dreamweaver has been the one and only application I and thousands of others have used to code, design and FTP websites for years. Some of us have been using Dreamweaver as far back as when Allaire built it specifically to help ColdFusion developers. Dreamweaver offered ColdFusion tag support, a design view when needed, and an efficient way to FTP files.
    It seems what Adobe is telling us now is that Dreamweaver is somehow not the right application for developing ColdFusion websites, but oddly enough the correct one for PHP developers. The only reason I can see that Adobe stripped the support for ColdFusion within Dreamweaver is to sell us CF Builder... which is suspiciously missing from any Creative Cloud subscription. Otherwise there was no real reason to pull support from ColdFusion within Dreamweaver.  
    What's more, it is going to take me and others weeks to learn a new program and that's time most of us don't have to spare. It's enough to keep up with the browser changes. I am a one man shop, as are many who used Dreamweaver, and every minute we use learning a new program instead of building websites is money lost. So Adobe is costing us money.
    The reality for a lot of developers is that we can barely pay the Creative Cloud subscription fees every month, much less purchase a whole new program just because Adobe has forced our hand. I just don't understand why Adobe would drop support for ColdFusion within Dreamweaver when the program was working. It wasn't like the program was broken and the ColdFusion tag support was causing a problem with the program.
    All Adobe has done is caused ill will towards their company and probably many developers to go out of business, at the least lose money when the economy is so tight. Thanks Adobe, for nothing.

    You can, relatively easily, put the rug back in place. Since you're a CC Subscriber, you can move back to a previous version of DW through the Creative Cloud Desktop App...
    Open the CC Desktop App
    Click Apps tab
    Scroll down to filters and versions
    Click previous versions
    Download and install an older version of DW
    From there, use the older DWCS6 until you have the time and inclination to learn CF Builder or move to another non-Adobe application. There's no reason to sit and struggle with the new non-CF version of DW CC, blow billable hours and miss deadlines due to training.
    As far as I've seen, there is no plan to bring any CF support back into DW. Adobe's plan is to move people to the perpetual license CF Builder instead.

  • Coldfusion support for Server 2012

    When are installers going to be made avaliable for Server 2012 for Cold Fusion?.
    Adobe have offically said that installers for windows 8 are 3-5  months away as of September 22nd, 2012 but we havent heard anything about Server 2012?
    Server 2012 was released to MSDN on the 4th of Sepetember. 4 Months seems a long time to wait with no word on installers or support for CF on Server 2012. Are you telling me Adobe doesnt have a MSDN account and only got access to Server 2012 at the same time as the generaly public?

    Unfortunately we are all paying the price for Oracle deferring the end of life of Java 6 from November to Feb. It sounded like Adobe were going roll all this stuff into their patch to add Java 7 support to CF9 and CF10, which they would have needed to get done by Nov. However now it seems they've slacked off and have left it to the last minute. I guess the good news is that this should all be done within the next month or so. The bad news is... it won't give us much chance to test the new release between when Adobe patch CF and before the Java 6 EOL.
    Adam

  • Does coldfusion 8 support the implementation of WS-Security ?

    Does coldfusion support the implementation of WS-Security? We are  running Coldfusion 8 Enterprise Edition .We are trying to consume a web  service that is written in java on an IBM web sphere server. Can  coldfusion 8 consume this web service and pass in the required  WS-Security elements?
    Requirement : To consume a Webservice developed in java from coldfusion using WS-Secuirty mode .
    Environment used : Windows 2003, IIS 6, Coldfusion 8, SQl server  2005
    While trying to consume a public webservice through coldfusion , We received unable to read WSDL file and Unknown host exception error.
    Hence,  we are using <cfhttp to consume webservices.
    Can  you please advise how we can consume webservice using WS-Secuirty  (SHA-1)?

    swoodrich wrote:
    > Does coldfusion support the implementation of
    WS-Security? I am running
    > Coldfusion 8 Enterprise Edition as a stand alone server.
    I am trying to
    > consume a web service that is written in java on an IBM
    web sphere server. Can
    > coldfusion consume this web service and pass in the
    required WS-Security
    > elements?
    >
    > Also, is the reverse achievable... Can I create a web
    service that implements
    > WS-Security on a coldfusion server?
    As far as I know CF cannot consume or produce WS-Security.
    I've consumed
    a .net security enabled web service using raw XML. I think
    it's much
    harder to produce ws-security in CF (you're still going to do
    it raw
    just that it's harder).
    Mack

  • Censorship on Adobe ColdFusion forums - Open letter to the management of the Adobe ColdFusion forums

    This is reproduced from its original location at http://cfmlblog.adamcameron.me/2013/06/censorship-on-adobe-coldfusion-forums.html; it is also posted on the relevant ColdFusion forum. Apologies for the cross-post, but the two forums have different membership, and I think it's relevant to both.
    Open letter to the management of the Adobe ColdFusion forums
    (I do not know how to contact you, but I will try to find out and send this to you directly as well, as a courtesy).
    Hi.
    I am a veteran user of your ColdFusion support forums. Over the last decade or so I have been visiting the site daily (indeed several times a day: I get notified when any post is made on any of your ColdFusion-centric forums), and answering as many of people's questions as I can. For the last few years it's been via the web UI so you can go check my participation, but prior to that I was using the forums via NNTP, and my participation during that period is less easy to quantify, but it's to the tune of a few thousand posts / answers to people's questions. I consider myself an asset to the forums, and the ColdFusion community. I mean this just as "for the record", rather than any attempt to inflate any sense of my worth.
    However as of today - unless you take remedial action as I will go on to detail - I will be surrendering my membership of your forums, and ceasing all attempts to assist people there.
    Why am I considering doing this? Well firstly I will reproduce a thread from your forums, then I will discuss it. Where possibly the quoted material below is as it was initially posted, and if it's not exactly as originally presented, this is an accident on my part. I have highlighted some points I wish to discuss with you, simply for ease of cross-reference.
    I have confirmed with Jason Dean (12Robots) that is happy for me to quote him here. I did not attempt to contact the other participant: "grazan".
    Below is a chronological reproduction of the thread (in its original form, anyhow):
    cold fusion 9 500 Internal server error.
    created by grazan
    all of a sudden none of our cfm web pages work on a windows 8 server running iis 7 .... the
    server shows no errors in the event viewer .... occasionally functionality comes back w/o doing
    anything ...... cold fusion did have all the hotfixes updated a few months ago but i cant get to
    the admin page to give what the version is
    thxs
    created by 12Robots
    First, ColdFusion is one word.
    Second, what is a WIndows 8 server?
    Third, and most important, you have provided ZERO detail. We can't help you if you don't provide something other than "none of our cfm web pages work".  ColdFusion has logs (<coldfusionDir>/logs) JRun has logs (<coldfusionDir>/runtime/logs). Even if the Windows event viewer shows nothing, there should be info in those log files about what is going on.
    Good luck,
    Jason
    created by grazan
    YOU KNOW JASON YOUR A FRICKING IDIOT ......
    I DIDNT REALIZE THIS WAS A GRAMMATICALLY CORREDCT FORUM ...
    THANKS FOR NO HELP
    created by 12Robots
    *you're
    jason
    created by Adam Cameron
    Hahahahaha. Nice.
    Adam
    created by Adam Cameron
    Well if you got over your misplaced indignation for a moment, let's see:
    ColdFusion is what people will google for, so in the spirit of helping others who might have the same question as you later on, spelling it right will help the community.
    Jason's observation that you give us absolutely nothing to go on so it's basically impossible to help you is a fairly poignant observation, right? You do want help? Right, so here's some suggestions:
    Articulate your issue clearly, with sufficient detail that we can help you. Read this:
    http://www.catb.org/esr/faqs/smartquestions.html
    Secondly... being rude to someone like Jason who really is one of the most helpful people on
    these forums is a pretty stupid idea. And just serves to make you look a bit of a dick. Esp. with the caps lock on.
    But anyway, let's call that a false start. Give us the details of your issue, and we'll try to help.
    Cheers.
    Adam
    At this point, the moderator started redacting earlier messages, as detailed below:
    Redacted version of earlier message:
    created by 12Robots
    First, [Jason, please see forum guidelines]
    [rest of message as above]
    Redacted version of earlier message:
    created by grazan
    [please see forum guidelines]
    Redacted version of earlier message:
    created by Adam Cameron
    Entire message redacted
    Redacted version of earlier message:
    created by Adam Cameron
    [unnecessary comments removed - Adam please see forum guidelines]
    Give us the details of your issue, and we'll try to help.
    Cheers.
    Adam
    And now back to the live thread:
    created by 12Robots
    Forum admin,
    You censored the comment "ColdFusion is one word"?  Seriously?
    I didn't realize that suggesting that someone spell the name of the product correctly was against the forum guidelines.  I guess I could go look it up, but I will just unsubscribe and help out at Stack Overflow instead.
    Good luck,
    Jason
    created by Adam Cameron
    Please see how much I used to help out on these forums.
    I'm outa here, but not before I complain about your dictatorial behaviour.
    Censorial nazi idiot.
    [The entire message above has now been redacted].
    That's the end of the relevant part of the thread.
    Clearly I wish to speak to you about this censorship your moderator is choosing to undertake.
    Firstly, let me say that I understand the perception that forums require moderation. Personally I think this position is of dubious merit, but so be it: it's a common practice. And I generally understand when I see things that have been moderated, or when a moderator step in and advises that they consider someone's wording contravenes forum guideline. I understand all this.
    However.
    I think the behaviour of your moderator in this situation is unacceptable. Let me elaborate.
    Firstly, The highlighted comment of Jason's was removed. This comment stated - correctly - that the correct spelling of ColdFusion is as one word, as per his guidance. This comment was censored/redacted by your moderator. For the life of me, applying my most "socially modest" mindset, I cannot see what was wrong with Jason's comment, and why it needed any follow-up on any description. It was accurate advice.
    The original poster's response to Jason was indeed a bit gratuitous, but - really - so what? No-one is taking offence here, and there's nothing anyone reasonable could take offence at. The person is just being a bit childish in their response. And, I hasten to add, at their own expense, I think. I see not reason to have redacted what they said.
    We now come to my responses. One entire response I made was redacted (I've only just noticed this, whilst proofreading this letter).  A number of tracts was redacted from my own initial post on the thread. Here I was simply explaining why Jason said what he did, and why it's good advice. And it was good advice. Your moderator here has removed both good advice, and an explanation as to why it was good advice. Again, I cannot fathom why your moderator has done this.
    Following on from this I back-up Jason's assertion that the original post was inadequate on detail for us to help. This too is accurate. I reiterated this to try to make the origial poster see that Jason wasn't simply being unhelpful - to the contrary - pointing out we need more information before we can help is very good initial advice here. Advice that has now been deleted.
    Next is some slightly contentious wording on my part, I suppose... at least if one doesn't actually read what I say, instead simply zooming in on one word and assessing it out of context. I pointed out that being abusive and writing in all-caps is unnecessary, and makes the person look like a dick. Note I didn't say the person was a dick (that would be abuse... very mild though), I was saying that given the behaviour the person was engaging in, they could be perceived that way. Which is... accurate. And saying someone is a dick and suggesting they could be perceived as a dick are two different things. One is ad hominem attack (bad), one is simply an observation / guidance (not bad).
    At this point Jason drew my attention to this censorship going on. And this is another thing that I think is inappropriate on the part of the moderator. I have little problem with them thinking that content on this thread needs censorship (whilst they are wrong, they are entitled to their opinion), to silently and anonymously redact people's posts is an inappropriate - and to be frank cowardly - handling of this situation. If the moderator has an issue with something written on the forums, the courteous and professional thing to do would be to advise the participants that they have overstepped. This would give us a chance to remediate the situation, or to simply disagree. Simply excising someone's work - because this is volunteer work we are engaging in here - is unacceptable.
    If anything ought to have been censored from the thread it was my last comment. Whilst it was accurate, I did use harsh sentiment, I accept this. However in the given situation, I don't think I have been the most out-of-line participant in proceedings.
    I would like you to remediate this situation, and here is how I would like you to do it.
    Restore Jason's original post. There was no reason to censor it.
    Restore grazan's all-caps post. It was doing no harm.
    Restore my second post (not the one laughing at Jason's joke, the longer one I discuss above). Again, useful and accurate information was removed from this post, and there was simply no reason to have had done so.
    You can leave my last comment redacted. Fair enough. Whilst I stand by what I said, it is unhelpful in the context of the thread.
    I also want the moderator to be censured, and I would like them to apologise for their behaviour, by posting on that thread explaining that they understand their behaviour was inappropriate and unacceptable.
    If they are a community volunteer, they should be dismissed from their position. They are clearly not capable of fulfilling this role in a professional, well-balanced manner.
    If they are an Adobe staff person, then the censure will have to be sufficient, although I think they should be relieved from their duties as a forum moderator, as they are not up to the task at hand.
    Talk to your other moderators and advise them they need to act with a sense of balance and professionalism when moderating the forums.
    In return, I will continue my participation on the forums, and continue to help the ColdFusion community members where I can, in the spirit of goodwill and co-operation. I will also try to convince Jason to do the same.
    If you cannot see right to resolve this situation appropriate, I will surrender my membership of the forums and cease helping your community.
    You can reply to me either via a comment against this post, or via email ([email protected]). That said, see the caveats in my communications policy: I reserve the right to publish any communications on this topic as I see fit (within the bounds of common sense).
    Thanks for your time.
    Adam Cameron

    Adam,
    Comments from a kindred spirit...
    I suggest you take a breather and go do something else for a few days or weeks.  Don't stomp your feet and say "I'm done for good, I won't be back", because like it or not, some of the reason you're here is to benefit YOU, and if you do go cold turkey you'll miss that benefit.
    In other words, "never say never".
    Like you, I have been extremely frustrated by the running of the forum from time to time as well.  Sometimes it's the quality of the forum software, sometimes it's the mix of other immature people who comment, sometimes it's just me.  Usually it's not the moderation or actual running of the forum, but I do understand where you're coming from.
    I have benefited greatly on several occasions just by taking a vacation from forum participation.
    We all have to understand two things:
    1.  We're able to communicate here by the good graces of Adobe, who are first and foremost a business, trying to achieve their business goals.  They'd rather not upset all the idiots, because unfortunately idiots have money to spend too.
    2.  Nobody's perfect.
    I'm not sure about the specifics, but the moderators are generally also volunteers.  See item 2 above.
    Hope you don't choose to stop contributing to the community, as no matter what, your contribution is good for the world.
    -Noel

  • ColdFusion 11 and Solr

    I just installed ColdFusion 11. I am pretty sure I selected the option to install the addons like Solr, but when I am in the coldfusion administrator under Data & Services, I click ColdFusion Collections and I get nothing. It won't go to the page at all. If I click on Solr Services a page will come up. If I click on ColdFusion collections and then restart the coldfusion addons I get a page that comes up saying
    "Unable to retrieve collections from the Search Services.Ensure that you have installed ColdFusion Search Service and it is running."
    I am assuming it means it isn't installed.
    So I went to Adobe - ColdFusion Support Center : More Downloads and downloaded/installed the Windows Add-on Services Standalone Installer. I didn't change any of the settings or folders and installed it. I restarted the server. I logged back into the coldfusion administrator and I see the same thing. Nothing changed. When I go to view the file folders I have c:coldfuion11 and a c:coldfusionAdd-onServices. Should the coldfusionAdd-onServices folder been within the coldfusion11 folder?
    I read you can create your collection through the administrator or through coding a page. I thought maybe I need to try it this way. So I created a page to create the collection and it did not work either.
    What am I missing? Did I miss a step or something to make this work?
    Any help I can get, I would appreciate.
    I have a windows 2008 server.

    Here are just a few of the solr files for you to look at. They all appear to be SUCCESSFUL.
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\abc
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\abo
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\backup
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\backupcleaner
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\commit
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\optimize
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\readercycle
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\rsyncd-disable
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\rsyncd-enable
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\rsyncd-start
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\rsyncd-stop
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\scripts-util
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snapcleaner
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snapinstaller
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snappuller
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snappuller-disable
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snappuller-enable
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\bin\snapshooter
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\conf\admin-extra.html
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\conf\elevate.xml
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\conf\mapping-ISOLatin1Accent.txt
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\conf\protwords.txt
                              Status: SUCCESSFUL
    Install File:             C:\ColdFusion11\cfusion\jetty\solr\conf\schema.xml
                              Status: SUCCESSFUL
    On the coldfusion-out.log file it all appears ok as well.
    I can see things like this that shows solr is starting:
    Apr 6, 2015 15:16:54 PM Information [localhost-startStop-1] - Starting jaxrs...
    Apr 6, 2015 15:16:54 PM Information [localhost-startStop-1] - Starting graphing...
    Apr 6, 2015 15:16:55 PM Information [localhost-startStop-1] - Starting solr...
    Apr 6, 2015 15:16:55 PM Information [localhost-startStop-1] - Starting archive...
    Apr 6, 2015 15:16:55 PM Information [localhost-startStop-1] - Starting document...
    Apr 6, 2015 15:16:55 PM Information [localhost-startStop-1] - Starting eventgateway...
    Apr 6, 2015 15:16:55 PM Information [localhost-startStop-1] - Event Gateway Disabled.
    I can see on this same log, when I am in the coldfusion administrator I click on ColdFusion Collections I see this:
    Apr 24, 2015 10:12:21 AM Error [ajp-bio-8014-exec-6] - The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: C:\ColdFusion11\cfusion\wwwroot\CFIDE\administrator\solr\index.cfm, line: 331

  • Change color of ColdFusion comments in Dreamweaver CC 2014

    Hi All,
    I've recently discovered Sublime Text 2, and really like their code coloring theme.  90% of my work still needs to be done in Dreamweaver.  I was able to find a Colors.xml file I could use, that got it very close to looking like sublime text.  The only real problem are ColdFusion comments.
    I changed this line in the XML C:\Users\{me}\AppData\Roaming\Adobe\Dreamweaver CC 2014\en_US\Configuration\
    <syntaxColor id="CodeColor_CFCommentText" text="#585835" bgcolor="#434343" /> from the original ffff99 bright yellow background, but after restarting Dreamweaver, the ColdFusion comments are still lite color text on this bright yellow background.  Horrible.
    It seems Dreamweaver CC 2014 removed a lot of ColdFusion options, sad.  Many of us still use it for Front-End work, while ColdFusion Builder works better for back-end.
    I really hope there is a way to get a dark color theme into Dreamweaver for ColdFusion.
    Any suggestions?

    What Adobe has done is blindly pull the rug right out from under our feet. Dreamweaver has been the one and only application I and thousands of others have used to code, design and FTP websites for years. Some of us have been using Dreamweaver as far back as when Allaire built it specifically to help ColdFusion developers. Dreamweaver offered ColdFusion tag support, a design view when needed, and an efficient way to FTP files.
    It seems what Adobe is telling us now is that Dreamweaver is some how not the right application for developing ColdFusion websites, but oddly enough the correct one for PHP developers. The only reason I can see that Adobe stripped the support for ColdFusion within Dreamweaver is to sell us CF Builder... which is suspiciously missing from any Creative Cloud subscription. Otherwise there was no real reason to pull support from ColdFusion within Dreamweaver. It is simple greed.  
    The reality for a lot of developers is that we can barely pay the Creative Cloud subscription fees every month, much less purchase a whole new program just because Adobe has forced our hand. Adobe needs to reestablish ColdFusion support in Dreamweaver or, based on what I have read in many forums, they will be losing a lot of customers. There are a lot of CF developers looking for an alternative to all of Adobe's products because of this "slap in the face" and I am sure there are companies out their already looking at this enormous opportunity.
    I, for one, am looking at other programs to replace everything I use from Adobe because I feel betrayed. Adobe may think they own the market but I am afraid they are going to learn the hard way. If you try to force the growth of the bottom line at the expense of ignoring your customers, you will fail. If you put your customers needs first, the bottom line will follow. Has history taught you nothing?

  • ColdFusion Developer stop functioning!

    Hello all,
    Yesterday, I installed ColdFusion Developer Edition and it
    was working fine for about a hour. Then, suddenly it completely
    stopped working. I know the code is correct because I uploaded my
    document to a remote server with ColdFusion support and everything
    worked correctly.
    All I'm doing is simply defining a variable with
    <cfset> and calling it with <cfoutput>, and for
    whatever reason the ColdFusion server is now it seems like the code
    is never even getting to the ColdFusion server because when I look
    at the "view > source" in internet explorer, the <cf> tags
    appear for the client to see.
    What might have caused ColdFusion to stop functioning all of
    a sudden? How can I get it working again? I have already tried
    uninstalling, and reinstalling, and installing the MX 7.2 update,
    and it still isn't working. Is there some way to reset everything
    within ColdFusion? I'm basically at a loss here, any help would be
    greatly appreciated.
    Thank you,
    Brian

    whooopsies! I figured out what I was doing wrong. Noob
    mistake -- rather than browsing to my files using
    http://localhost:portnumber/directory
    .... I was trying to just right click on my .cfm files on my hard
    drive and open them in my browser....
    C:\CFusionMX7\wwwroot\examples\variables_form.cfm -- in which case,
    obviously the browser didn't know to route the files to the port of
    the ColdFusion server, and thus wasn't compiling the code...

  • Ticket/Support System?

    Looking for a Coldfusion Support/Ticket system, Does anybody
    know of one?
    Regards
    Craig

    Most likely an IT ticket system, where people create tickets
    when a problem arises, and the IT tech/dept receives the ticket and
    reacts appropriately.
    I do not know of a pre-made system like this, however it
    would take little programming to set this up. Build it into a web
    app for easy company distribution. Then create a form that inputs
    the user's name, department, and problem. If able, use CFMAIL to
    notify your tech team when a ticket has been filed. Else, you will
    have to keep a meta refresh page querying from a ticket database to
    show new tickets in realtime.
    We do this at my agency and CFMAIL has been very useful. We
    get a somewhat large volume of support calls from unplugged cables,
    printer toner changes, to broken apps. The ticket system allows us
    to better manage the immediate problems from the ones that can
    wait. We still take urgent support by phone because sometimes,
    email just isn't fast enough! :)

  • ColdFusion MX7 Hosting

    Hey Guys,
    I have really focused on learning CFML of late as I really
    like the Tag Based Syntax. It's been pretty easy to pick up and I
    have loved the support that I receive on all of the forums.
    However, I have had a couple of people ask me to do some coding for
    them and I have noticed that many of my perspective clients already
    have web hosting with companies that don't offer ColdFusion
    support. Everyone does however offer PHP support. What do all of
    you guys do when you run into this problem? I would hate to have to
    switch over to PHP at this point because of this roadblock.

    re: I would hate to have to switch over to PHP at this point
    because of this.
    As a cf developer, you will need to learn php or some other
    more popular
    language. This problem is typical with cf as it is hard for
    hosters to
    purchase and install coldfusion - its too expensive for most
    of them.
    Yes, you can try asking all your clients to switch hosts, but
    I suggest you
    don't do this. Your cliest should not know or care what
    technology is in
    place. If you keep asking them to move they will want to know
    why, and also,
    howcome you are unable to work with the technologies
    currently available to
    them. Afterall, php can do all the same things as cf can. Why
    should they
    move??
    CF is not ideal for general web developmetnt as it imposes
    such restrictions
    on which host you can use (there are relatively few hosting
    compaies that
    support it and they nearly always charge extra for it) CF is
    used a lot more
    in government where they can afford to pay for it and host
    apps themselves.
    >>> Everyone does however offer PHP support.
    PHP is more widely supported and you generally can find apps
    and code freee
    of charge, so it can be much more productive than cf. Asp.net
    is another
    good choice but it's not as easy to learn as php. CF is good
    too - but you
    certainly don't want to be in a situation where you can't
    support your
    clients or you have to put the pressure on them to move based
    on your own
    technology choices.
    "Woody1980" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hey Guys,
    >
    > I have really focused on learning CFML of late as I
    really like Tag Based
    > Syntax. It's been pretty easy to pick up and I have
    loved the support that
    > I
    > receive on all of the forums. However, I have had a
    couple of people ask
    > me to
    > do some coding for them and I have noticed that many of
    my perspective
    > clients
    > already have web hosting with companies that don't offer
    ColdFusion
    > support.
    > Everyone does however offer PHP support. What do all of
    you guys do when
    > you
    > run into this problem? I would hate to have to switch
    over to PHP at this
    > point
    > because of this.
    >

  • Coldfusion 8 & WS-Security

    Does coldfusion support the implementation of WS-Security? I
    am running Coldfusion 8 Enterprise Edition as a stand alone server.
    I am trying to consume a web service that is written in java on an
    IBM web sphere server. Can coldfusion consume this web service and
    pass in the required WS-Security elements?
    Also, is the reverse achievable... Can I create a web service
    that implements WS-Security on a coldfusion server?

    swoodrich wrote:
    > Does coldfusion support the implementation of
    WS-Security? I am running
    > Coldfusion 8 Enterprise Edition as a stand alone server.
    I am trying to
    > consume a web service that is written in java on an IBM
    web sphere server. Can
    > coldfusion consume this web service and pass in the
    required WS-Security
    > elements?
    >
    > Also, is the reverse achievable... Can I create a web
    service that implements
    > WS-Security on a coldfusion server?
    As far as I know CF cannot consume or produce WS-Security.
    I've consumed
    a .net security enabled web service using raw XML. I think
    it's much
    harder to produce ws-security in CF (you're still going to do
    it raw
    just that it's harder).
    Mack

  • ColdFusion 9 change Java Default Locale ?

    I keep getting en error with
    en_MY must be one of the ColdFusion supported locales.
    The list of supported locales is stored in the variable Server.ColdFusion.SupportedLocales.
    The error occurred in E:\wamp\www\Test2\test.cfm: line 2
    1 : <cfform>
    2 : <cfinput type="datefield" name="test" value="dasd">
    3 : </cfform>
    I check my jvm detail, my java default locate is showing en_MY.
    I have try few way also can't solve my problem
    http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-6d 90.html
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -67f2.html
    http://help.adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSc3ff6d0ea77859461172e0811cbec22c24-7f a3.html
    After i complete setting with the intruction from the link , i try restart computer. but the java default locate still being same.

    Thank you.
    Currently I am using ColdFusion 9 and with multiserver.
    I could not found the jvm argument w/ "-Duser.language" or  "-Duser.region"
    In my jvm.config, i only found this is similar
    # Arguments to VM
    java.args=-server -Xmx512m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/
    I saw there is another file call wsconfig_jvm.config , but cant found it , the simiar is
    java.args=-Xms32m -Xmx128m
    # java.class.path - use this for adding individual jars or
    # directories.  When directories are included they will be searched
    # for jars and zips and they will be added to the classpath (in
    # addition to the directory itself), the jar to be used in launching
    # will be appended to this classpath

  • ColdFusion locale problem

    Hi, i am using ColdFusion 8 on a Windows 2003 Server (R2).
    Locale of the operating system is Turkish. As usual with any java
    application server, in order to start ColdFusion server, i have to
    use
    -Duser.language=tr_TR JVM parameter (by modifying arguments
    section in jvm.config in cfroot\runtime\bin). With that, everything
    works fine except verity server. When i enter Verity Collections
    page at CF Administrator, i get
    tr-tr_TR must be one of the ColdFusion supported locales
    error. Also, when i enter server information page
    (/CFIDE/administrator/settings/version.cfm), it says
    tr-tr_TR for Java Default Locale. Isn't that wrong?
    Shouldn't it be just tr_TR not tr-tr_TR?
    Thanks

    No it isn't a typo. I tried following combinations but only
    the last two can start the application server without any error.
    -Duser.language=tr (fails to start)
    -Duser.language=tr -Duser.country=TR (fails to start)
    -Duser.language=tr_TR
    -Duser.languate=tr-TR
    With the first two combination or without any option i get
    the following error while starting CF8.
    error Deployer Service failed to deploy file:/C:/ColdFusion8/
    * null
    [1]java.lang.NullPointerException
    at
    jrun.ea.EnterpriseApplicationFactory.createWebModule(EnterpriseApplicationFactory.java:62 4)
    at
    jrun.ea.EnterpriseApplicationFactory.create(EnterpriseApplicationFactory.java:212)
    at
    jrun.ea.EnterpriseApplicationFactory.create(EnterpriseApplicationFactory.java:148)
    at
    jrun.deployment.DeployerService.createWatchedDeployment(DeployerService.java:240)
    at
    jrun.deployment.DeployerService.deploy(DeployerService.java:428)
    at
    jrun.deployment.DeployerService.handleEvent(DeployerService.java:382)
    at
    jrunx.kernel.JRunServiceDeployer.fireEvent(JRunServiceDeployer.java:710)
    at
    jrunx.kernel.JRunServiceDeployer.deployServices(JRunServiceDeployer.java:111)
    at
    jrunx.kernel.DeploymentService.loadServices(DeploymentService.java:46)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at
    com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java :93)
    at
    com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java :27)
    at
    com.sun.jmx.mbeanserver.MBeanIntrospector.invokeM(MBeanIntrospector.java:208)
    at
    com.sun.jmx.mbeanserver.PerInterface.invoke(PerInterface.java:120)
    at
    com.sun.jmx.mbeanserver.MBeanSupport.invoke(MBeanSupport.java:262)
    at
    com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerIntercepto r.java:836)
    at
    com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
    at jrunx.kernel.JRun.startServer(JRun.java:575)
    at jrunx.kernel.JRun.<init>(JRun.java:493)
    at jrunx.kernel.JRun$1.run(JRun.java:346)
    at java.security.AccessController.doPrivileged(Native
    Method)
    at jrunx.kernel.JRun.start(JRun.java:343)
    at jrunx.kernel.JRun.startByNTService(JRun.java:427)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at jrunx.kernel.JRun.invoke(JRun.java:180)
    at jrunx.kernel.JRun.main(JRun.java:168)
    This problem happens with every java application server and
    most of the java applications on Turkish locale machines and
    Turkish java developers are accustomed to start applications with
    jvm paramter -Duser.language=tr_TR.
    PaulH wrote:
    quote:
    btw did you also install the language pack that contains
    turkish?
    Yes, i installed the Turkish locale pack under
    verity\k2\common folder.

Maybe you are looking for