Is Compressor 1.2.1 Working Better Under QT 7.0.2?

I think Compressor 1.2.1 is working faster and without slowing down batched items now that I've downloaded QT 7.0.2. Is anybody else seeing this return to Compressor's previous performance, the way it used to work under OSX 10.3?

I don't know about Compressor 1.2.1, but a quick quality test using Compressor 2.0.1 with the QuickTime 7.0.2 update showed that two-pass VBR still has quality problems with some video sequences. This has been a widely discussed and reported issue with Compressor 2.0.1 and apparently the QuickTime 7 update did not change the behavior. I really didn't expect it to fix this particular problem but I was holding out at least a little hope of improvement. In any case, with the QT 7.0.2 update shipping maybe we will get an update to Compressor 2 in the next few days (since they may be linked).

Similar Messages

Does cs5 gpu work better under windows 7 then xp ?

Hi
i noticed that photoshop cs5 video card gpu works better under windows 7 32bit then xp 32bit (gpu come off but i enabled and restart photoshop cs5)
i did notice a better performance of xp sp3 then xp sp2, maybe i'm wrong
it's my guess or is real ?
i used the same ati drivers
by the way are there ati drivers that works better for photoshop cs5 then others?
thanks
cheers

I've tried all different settings. In the end, and this is PURELY SUBJECTIVE, I think as good results just by leaving them on the out-of-box defaults as with any other setting. My Photoshop CS5 64 bit is currently set up as follows, and my system is stable:
I normally increase my History levels, as you can see above, since I have a lot of RAM and I like to be able to go a long way back in time to what I had before a bunch of work - e.g., to double check to ensure I haven't lost info.
The one other setting in that set that I DO use - with GREAT care - is that occasionally I set the Cache Levels down to 1, which (with OpenGL turned off) allows me to see layer compositing on the screen done in the full bit depth of the document (e.g., 16 bits/channel). This matters when I work on astroimages, which can involve severe pushing of the data (e.g., really steep curves).
I run my OpenGL settings in Advanced mode, which seems to work fine, though again I've never really noticed a performance difference between Normal and Advanced.
-Noel

Do non-US english keyboards work properly under ios7 on an ipad4?

Does anyone know if non-american english bluetooth keyboards work properly under ios7 on the iPad 4?
I figure that the results will probably be similar to an iPhone 5s running iOS 7 which is one of a couple reasons why I still have ios6 on my iPad (in addition to iOS 6 just looking far better.)
I have iOS 7.1.2 on my iPhone 5s and also tried typing with it in a few other 7.0.x iOS installs, but for the non-apple apps the keyboard keys I press simply put the key for what would be there on the US keyboard except for keys with no US keyboard counterpart. The keys with no US keyboard counterpart (such as the _ (underscore) key) do absolutely nothing at all.
Does anyone know if somehow this is specific to the iPhone 5s or if this is just inherent to ios7?
As I said, the apple apps seem to work fine. I checked messages, notes, reminders, and spotlight those recognize my keyboard.
Evernote also seems to recognize it.
Facebook, twitter, tumblr, and google+ do not recognize the keyboard (and this is an official apple bluetooth keyboard that has worked perfectly fine with my iPhone 4, 4s, and still works with my iPad 4 (all running ios5 or ios6)).
Does anyone know of any setting that was introduced in ios7 that might fix this or is this just apple screwing up the bluetooth keyboard api and not letting other developers know how to get correct keystrokes from a bluetooth keyboard?
I'd love to be able to FaceTime on my iPad again, but if I'm going to have to put up with an os that I find visually unappealing, I'd at least hope that it could get the right keystrokes to apps (or at least make obvious how to do so).

Hi konekotron,
See this manual about using the Apple Wireless Keyboard with your iPad -
iPad User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
See page 25 and the section on using International Keyboards on page 125.
A similar guide for the iPhone -
iPhone User Guide
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
See page 28.
Thanks for using Apple Support Communities.
Best,
Brett L

Kernel IO schedulers: noop works better... why?

I've noticed that the CFQ scheduler sometimes doesn't seem to work very well, e.g. responsiveness visibly suffers when there's a lot of disk I/O going on. Deadline seems to be a little better under those conditions, but not much.
I'd avoided using the noop scheduler, of course, because it would make the disk do more work... Right?
But today I saw this: https://bugs.launchpad.net/ubuntu/+sour … bug/381300 And lo and behold, when I tried the noop scheduler on my netbook, it made things much more responsive under load.
Suffice to say I'm kind of stumped. I can't think of any good reason why a scheduler that does nothing to minimize disk labor should perform better... The only thing that occurs to me is that maybe SATA drives' native command queuing somehow messes with the scheduling, and I'm not altogether sure that idea makes sense.
Is this just some strange quirk of my netbook's hardware, or is there a good reason for noop to work better on desktops?
Edit: Hmm, I'm noticing lower CPU use by tasks that use a lot of disk I/O. Maybe that has something to do with it?
Last edited by Gullible Jones (2011-07-27 23:12:44)

Gusar wrote:
graysky wrote:@LCV - sure but which one is the most relevant to this question?
None, I would say. What we're interested in is how responsive a system is during heavy i/o. It's hard to benchmark that, mainly because it's very subjective.
Jackd + heavy i/o (maybe iozone) + interacting with the DE might be a good testing candidate
based on the number xruns, interactivity with the desktop, how applications run, etc. ~ that's how i used to tune/optimize non-rt kernels to perform like RT, when my hardware on a particular machine wasn't supported very well (by RT). - i am still able to have zero xruns, and use that crappy laptop (which now lives in a rackmount, and runs 2.6.37-zen) as a musical instrument (actually, several -> synths/samplers/sooperlooper).
i'll probably do a test like that over here, but this new machine has only been running a few days, and i haven't even touched the proaudio side of things yet, hell i haven't even installed VMware, or any of my VMs (for work) yet. lazy man! lol.
EDIT: and while i totally agree it is subjective for this type of benchmark, what isn't that subjective is how many xruns i would be getting vs. how well each scheduler benchmarked (in iozone) ... as that is number crunching. the only part of the mix that is subjective is observation, but enough repeated tests, even through observation (including, the numbers) will yield a winner (on my machine anyway).
cheerz
Last edited by triplesquarednine (2011-07-29 18:42:03)

Is there any way to make Siri work better?

I am absoutley amazed at how bad Siri is working now. I articulate carefully when using the mic button to dictate emails, text messages, etc. Siri is making way more mistakes than in the past. Lately the Siri function outright skips spoken words that are clearly articulated with a plain english voice. Many of my friends consider me an "Apple fan boy" but they also can't believe when Siri messes up most of the sentences that I clearly speak. I've reinstalled iOS 6 and even got a new phone from Apple but the problem is still the same.
Is there anything I can do to make this, not so great, dictation function work better? I would much rather have the opportunity to train Siri so that it becomes a useful bsuness tool.
Will H.
Marketing Director
Metro Detroit, Michigan

WizardWill wrote:
I have done all that for years and this has to be the world record for beta length on such an important function.
I've forgotten how long Gmail was in beta but, as Siri has only been out for about two years, I know that Gmail beats it by a mile.
I know Apple has spent a ton of time on the look of iOS 7 in the upcoming release, which is great. But the way we communicate with our iPhone should be a huge priority, and it looks like apple has passed it to the back burner while still calling it beta. My friends with Androids and Google are showing me up and I am mad about it!
And they've announced iOS 7 will include improvements to Siri.
For what it's worth, I also have a Samsung Galaxy S4 (S3 before that). I find that Siri and Apple's speech to text works as well or better in almost all circumstances. I can get speech to text to work pretty well on the Samsung but it never understands me on things like "Send a text" or Open <program>", things that Siri never fails me with. Combined with my BT headset, with only one touch of the button on the headset, I can listen to a new text and respond to it.
I'm willing to entertain the idea that some people have better luck with one than the other. I'm sure there are differences in the underlying natural language recognition algorithms each company uses. I've also met people who can't seem to make either one work. And I've not been able to figure out why.
Best of luck.

Audigy 2 Platinum Ex No longer working properly under vista

;Audigy 2 Platinum Ex No longer working properly under vistat I have just upgraded to vista and I find my sound card to be no longer functional
I have upgraded all the fri'vers I can find
SBAX_PCDRVBETA_US_2_8_000.exe
creative_sbxfi_250002_vista.exe
and a couple of others that SecurityCentre found
And when I open "Surround Mixer" I get "The selected soundcard is not supprted by the application," whatever the hell that means.
Ihave spent all day researching installing rebooting, and cannot get microphone, and all the other functions "what you hear" etc to work.
What must I do to get this perfectly good sound card to work please. Vista has been out for some time now, and I would export supportingdrivers yo have been redily visible.
Thank you in anticipation.

? I guess Creative doesn't care about living up to the promise that their product is upgradeable as new technologies emerge such as VISTA. They were give plenty of warning, that it was coming out, and it has been out for some time. I guess the $700AUS I spent is down the tubes, because the lazy people at creative cannot be bothered to bring it into compatibility - AS PROMISED with "peace of mind" they said. There is no way that I will acti'vely tell people how good creative is any more. In fact I will be acti've in just the opposite.
Get of your backsides and support AS PROMISED, we deserve it, instead of giving us second rate partial compatibilities. I have wasted the best part of a week trying to get it all sorted, where do I send the bill for my time? Hvae I got sour grapes? No, I just expect decent support as promised.
I issue the challenge - ?Provide decent support and I will retract. Fair is fair. I PROMISE.

Laserjet P1006 works better but not good enough in Windows 8.1

Background: I ran the Windows 8 pre-install check for hardware compatibility. It said I would be able to use my HP Laserjet P1006. That was wrong. The printer never worked once under Windows 8.0. That was over a year without a home printer unless I carried it to my wife's Windows 7 laptop to use.
Current situation: I got the Windows 8.1 upgrade (64-bit). The drivers are now available. I re-installed the Laserjet P1006 and it can be used from my desktop and shared to my wife's Windows 7 on the wireless home network.
Issues:
1) if paper runs out there is no way to restart the printing and the print must be cancelled from the X button on the printer... because there is nothing on the print queue after paper runs out.
2) if you don't wait for the printout to finish before you print another document, then the printer will hang for a very long time (20 minutes) and eventually print the end of document 1 and then document 2. Apparently this is related to 1) above, because the print queue will only show the second document when the first is still not completed.
3) even with power saver turned OFF, drives off NEVER, etc. the network sharing of this printer requires that I wake the monitors, enter the password, and finally STOP/START the SPOOLER SERVICE. Even then it's likely we won't get the shared printer to work on the same day... but likely it will print much later when some miracle occurs.
I have some other printers that have recently been gifted with W8.1 drivers. I can try them to see if these spool and communication problems are pervasive (Windows 8.1) or specific to the P1006 driver.
I have actually loaded the HASP deck for an NJE/RJE station on the TUCC. My first PC was an OSBORNE I. I cut my teeth on KIM-1 and Commodore P.E.T. machines.

Hi AZBen,
Welcome to the HP Forums, I hope you enjoy your experience!
I read your post and you are having issues printing and using the printer sharing.
I will be happy to help you.
The printer has a USB connection and works properly when connected directly to a computer by a USB connection through the software.
Can't guarantee printer sharing will work.
You want to use the normal USB slot 2.0 not the latest USB 3.0. USB 3.0 are supposed to be backwards compatible.
Temporarily turn off and any Firewalls and Antivirus software to see if this will resolve the issue.
Hope this helps.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

BO XI R2 works better on windows 2003 server 32 bit or windows 2003 server 64 bit

Post Author: abdulachukatla
CA Forum: Authentication
I need one small clarification regarding Business Objects Enterprise Edition, kindly request you to provide the information on, whether BO XI E will work better on windows 2003 32bit server or windows 2003 64bit server.
Thanks in Advance
Abdul

Hello...aahh..MickyMouse
could you please provide some more details. I never saw that you have to login during the installation to anything !
Or are you trying to install a ServicePack for Rel.2 ?
Regards
-Seb.

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

IMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!

iMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!
Please don't tell me to adjust anything on the preferences, since I have tried all. I think it may be anoter kind of problem, maybe hardware related or anything.
I ran the Hardware repair DVD and everything was ok, but when the imac restarted the screen was very lit again, but when it went sleep, when it went awake again the screen got dimmed again. Because of that I think that the problem could be software related, but who knows. Excuse my english.

I can't see another possible answer - the longer your machine is up, the more the power supply is stressed, it protects itself by dimming the screen to lower the draw on it.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

When I open Gmail my calendar will not open. It tries to connect but cannot redirect properly. It works fine under Windows explorer.

When I'm logged into Gmail and I try to open up my Gmail Calendar I get a error in the window saying "The page isn't redirecting properly". It works fine under Windows Explorer. I have Windows 7 and the latest Firefox application, downloaded today.

hello sphowe, as afirst step please try to [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from google.com]] and reload the page.

Webpages won't load & seem to be redirected to Yahoo Search keep getting Yahoo 404 message. Works better on IE but some similar problems. I have Windows Vista

Webpages won't load correctly all the time. Sometimes I am entering the web address in the browser 4 or 5 times before it will go to the correct page. It seems to be redirecting to a Yahoo Search that gives a Yahoo 404 in the tab. (I don't know what this means.) My laptop works better on IE, but still has same issues just not as frequently. I have Windows Vista. Also, Yahoo Mail and Facebook is coming up in super large print and no pictures.

I have this very same issue and it is driving me insane.
Trying to go to Youtube or imageshack or even google.com it tends to redirect repletively to a yahoo 404 page!
It was real bad a few weeks ago. I was watching a live stream for a charity event and the page kept refreshing on it's own to a yahoo 404 page! I was ON THE PAGE watching the stream, but that very page kept refreshing to a 404.
I'm also doing job hunts and get this a lot! Try and send in an application? I have to fight with yahoo to let it go through!

TS1398 problem in wifi range i use my phone my rume but i think china mobile is working better than iphone ......

problem in wifi range i use my phone my rume but i think china mobile is working better than iphone ......

I don't understand what you are asking here. Can you try and ask again?

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.
Can someone help me?
Thank you!

Got the phone direct from the Apple website, so I assume it was unlocked, and it had been on giffgaff ever since but I don't see why that's a problem?
The carrier was automatically selected as Free and is up to date.
There seemed to be no problem that the SIM was being used in an iPhone 4 and my friends in exactly the same situation (e.g. arriving in France and moving over to the Free network with iPhone 4's) have had zero problems with their 3G network; it just seems to be me.
The Free Mobile Network is included on this list which I guess means that they are Apple-approved? iPhone: Wireless carrier support and features
How do I find out whether or not I would need to manually configure an APN? I'm not even sure I know what that is.

Is Compressor 1.2.1 Working Better Under QT 7.0.2?

Similar Messages

Maybe you are looking for