Is Connect add in for v. 9.0 compatible with 10.7.5

I have a support client who is experiencing an add in crash using 10.7.5.
Is this version of OSX supported by the 9 add in?

He is installing the add in directly from our Test page on our server: https://connect.unl.edu/common/help/en/support/meeting_test.htm
It downloads and installs but when it opens it immediately crashes.

Similar Messages

Is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

If you are using After Effects CS6 (11) or After Effects CC (12), then install the updates:
http://adobe.ly/AE_CC_1201_Mavericks

Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite?

Hello,
Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite? Is it possible to reinstall the driver from an older version?
Best,
Christophe

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?

Yes, but it is absolutely critical to delete all existing preferences after upgrading to 10.9.
I'm running PSE 6, 8, 9, 10, 11, and 12 in 10.9. PSE 11 has a slight problem (with a couple of filters) but otherwise it all works.

Recommendations for External DVD Burner compatible with 10.5 Leopard?

We still have an older MacBook that we bought in 2007, it works great except for the CD/DVD drive. I need to be able to burn DVD's, could anyone recommend an External DVD Burner that would be compatible with 10.5 Leopard? Or at least give me an idea of what I need to look for to know if it should work before I buy it? Thank you!

Hello,
Biggest thing you want to avoid is Bus powered ones, here's one good suggestion...
http://eshop.macsales.com/item/OWC/VLU2SD24XLS/

Is Bluetooth module for Mac Pro/iMac compatible with FW800 MDD?

I've been looking at fitting an internal Apple Bluetooth module in my FW800 MDD G4, and I've noticed the later modules for Intel Macs appear to have the same form factor. The connection to the logic board looks identical, as do the mounting holes. The only physical difference seems to be where the BT antenna connects (below on the original G4 card, above on the later modules).
Has anyone tried fitting one with success?

if you got the guts, shove it in there. think the issue you will have is the original machines supported the 1.1 cards, the card you speak of is 2.0

Why is McAfee Site Advisor offered as an add-on when it is not compatible with Firefox?

With Site Advisor enabled the Firefox tab line is taken over by Chinese characters to the extent that the entire line becomes unreadable. The only solution is to disable the add-on. This has been going on for months now - I have reinstalled and started using IE 11 again in frustration. Can the problem be fixed? If so, how long is it going to take?

hi Poppa, you'll have to contact macafee about this issue - they offer & program this addon...

Is belkin usb ps/2 adaptor FU119Ve1 used for a special keyboard compatible with mac?

I want to use an old keyboard - Keytronic 101 on a mac desktop. It has two adaptors that may need drivers. I found the driver for the Belkin FSU409-CU that drives the built in mouse. I now need to find a mac driver the Belkin usb ps/2 adaptor FU119Ve1? Any ideas?

That's correct, the link perfectly describes the Apple 20" Cinema Display I have. With the new Mac Minis requiring an HDMI cable to link to a display, the HDMI to DVI (female) adapter looks like the one I need. I found this on Amazon: http://www.amazon.com/Gino-Black-Female-Converter-Adapter/dp/B006Z8N60C/ref=sr_1 _18?s=electronics&ie=UTF8&qid=1371158207&sr=1-18&keywords=hdmi+to+dvi+adapter+ca ble
This adapter is an all-in-one plug with no cable linking the HDMI to the DVI ends. It looks like it might be too wide to plug in anything immediately adjacent to the HDMI socket on the Mac Mini due to the width of the adapter when the adapter is plugged in. However, I could get around this by purchasing an extension cable with HDMI male on one end and the HDMI female on the other if I had to.
However, one of the comments said that the DVI is video-only and that another cable is required for audio. Can I assume that plugging in either or both of the other connections (a USB and a FireWire) coming out of the 20" display will take care of audio?
That leads to another answer, but I'm confident that I'm almost there thanks to your help. Close enough to mark this as "solved". Thank you! Let me know if you have any further thoughts with regard to the audio though.

Urgent !!! I must download SSPS for doctoral program, not compatible with Firefox.

I use Firefox for all my classwork for my doctoral program. However I have assignments in Statistics that require IBM SSPS, which I am told is incompatible with Firefox. I am trying to use Internet Explorer for that download, but Firefox will not let me do so. This is an urgent matter with doctoral papers due Monday, 1/13/14.

Hello,
Can you please be a bit more specific about the issue you are facing. As I understand you are trying to use [http://www-01.ibm.com/software/analytics/spss/ IBM SSPS] on Firefox and the application is not displaying properly. Is that the issue you are facing?
And from what you mentioned the application is showing up fine on Internet Explorer. Is that the case?
Thank you

Safari for Windows is NOT compatible with Unicode 3.1 CJK characters!

This is an "old" problem since Safari for Windows was initially released. In the meantime, the problem is still not fixed in the latest version 4.0.3 (531.9.1).
Not only Safari (for Windows) does not properly show homepages that contain Unicode 3.1 CJK characters, but it also fails to show Unicode 3.1 CJK characters (it shows "squares" instead) in the whole application, such as Search box and all dialog boxes. Will this be fixed in the next release?
By the way, it is strange that Safari 4 for Mac is Unicode 3.1 compatible.

To speak more precisely, the Safari for Windows doesn't support CJK characters of Unicode CJK Unified Ideographs Extension B.
The following test illustrates the incompatibility of Safari for Windows:
1. Sample text displayed in Firefox 3.0.2 on Fedora 9.
http://farm4.static.flickr.com/3020/3002743180_e026d5c84b.jpg
2. Sample text displayed in Safari 3.x/4.x on Windows XP with "MingLiu Ext-B" (an Ext-B font provided by Microsoft) installed.
http://farm4.static.flickr.com/3224/2971019999_1c113109a9.jpg

When Firefox launches a window opens that says a plugin for Kaspersky is not compatible with firefox. I have to close that window fefore firefox will lsunch.

I have gone into options, General, Extensions. This Kaspersky add-on is not present. Kaspersky used to be my anti virus software. I called my self deleting that software. I don't know where firefox is getting it.
Firefox is my default browser. I cannot launch links without closing the error window that comes up.
I am considering deleting firefox and reinstalling. Just haven't done that yet.
Any advice would be appreciated

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Tuxedo 7.1 for Solaris 7 software compatible with solaris 8?

Hi there,
I have the following message after installed Tuxedo 7.1:
After installed the tuxedo 7.1, I couldn't boot Oracle_XA. Could you
please help...
The error message is as below:
(csh) tuxonl@mbsupgd:/vol1/mbf/prd/conf/tuxedo6.4> tmboot -s Oracle_XA
INFO: BEA Engine, Version 7.1
INFO: Serial #: 650522264137-730676799843, Expiration 2002-06-24,
Maxusers 10
INFO: Licensed to: BEA Evaluation Customer
Booting server processes ...
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5522 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5523 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5524 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5525 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5526 Assume started (pipe).
5 processes started.
After installed tuxedo 7.1, I've copied Oracle_XA executable from tuxedo
6.5 to /tuxedo7.1/bin directory. No amendment was done on RM file for
tuxedo 7.1.
Please help me
Thanks
Neo

We are guessing that the program that you call Oracle_XA is the name you
gave to a TMS, built with a buildtms command. Are we correct? (Is it
listed in the GROUPS section, or the SERVERS section?)
In any case, Oracle_XA is not a Tuxedo-supplied executable, so it is
either a TMS, or one of your application servers.
Normally, there would not be a process called Oracle_XA. This is the
name used to identify the Oracle RM, but people usually call their TMSs
TMS_ORA, or something else with the name TMS in it.
You will have to find out how this Oracle_XA program was built, and
rebuild it for the new release.
The particular error message you are getting is because tperrno was
changed from a global variable to a macro/function in 7.1.
Scott
Neo Gigs wrote:
>
Can I have more information what is TMS?
Peter Holditch <[email protected]> wrote:
Neo,
You cannot copy any server executable (including a TMS) from one release
of
Tuxedo to another. This is the cause of your problem.
You need to rebuild a TMS for the new version of Tuxedo, using the buildtms
command. You will need to rebuild all your application servers too.
I hope that helps.
Regards,
Peter.
Neo Gigs wrote:
Hi there,
I have the following message after installed Tuxedo 7.1:
After installed the tuxedo 7.1, I couldn't boot Oracle_XA. Could you
please help...
The error message is as below:
(csh) tuxonl@mbsupgd:/vol1/mbf/prd/conf/tuxedo6.4> tmboot -s Oracle_XA
INFO: BEA Engine, Version 7.1
INFO: Serial #: 650522264137-730676799843, Expiration 2002-06-24,
Maxusers 10
INFO: Licensed to: BEA Evaluation Customer
Booting server processes ...
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5522 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5523 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5524 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5525 Assume started (pipe).
exec Oracle_XA -A :
ld.so.1: Oracle_XA: fatal: relocation error: file Oracle_XA:
symbol tper
rno: referenced symbol not found
CMDTUX_CAT:819: INFO: Process id=5526 Assume started (pipe).
5 processes started.
After installed tuxedo 7.1, I've copied Oracle_XA executable from tuxedo
6.5 to /tuxedo7.1/bin directory. No amendment was done on RM file for
tuxedo 7.1.
Please help me
Thanks
Neo

Is lion compatible with messenger 8 for mac, Is lion compatible with messenger 8 for mac?

I have os x Lion installed, will Messenger 8 for make work ok ?

Yes. The only problem you could face, is if you want to reinstall MS Office 2008 on Lion - this is not possible, because the installer runs on Rosetta, which is no longer supported in Lion. But if you already have Office installed, there should be absolutely no problems.

When Sony will update drivers and software for VPCF23EFX to be compatible with win 10 ??

http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320 Which Windows version do you have?

Hi mohamed-algamal,
Welcome to Sony Community!
Thank you for showing interest in upgrading to Windows 8. In addition to what robertwycoff said we highly recommend that you also check out this link for more information about upgrading to Windows 10.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

How do change file format for videos to be compatible with iDVD?

My husband's uncle sent us several short files of video he took with his camera or cell phone, and I really want to burn them onto a DVD using iDVD. When I drag one of the files into the program, however, it says "your last action is not supported by iDVD." All the other videos in my iPhoto works, so I'm guessing it's the wrong type of file. Does anyone know how to change to file type so it's iDVD compatible? Right now the files are ".MOV." The one I have that are ".AVI" seem to work just fine. Any insight is appreciated!!
Thanks!

You need to convert those files to something iMovie can handle, like DV, before bringing them into iDVD.
For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/

Is Connect add in for v. 9.0 compatible with 10.7.5

Similar Messages

Maybe you are looking for