Is Crystal RAS 9 compatible with Windows 2003 server?

We just upgraded out test RAS 9 server with Windows 2003 OS, and now the Crystal Report Application Server service won't start.  We're getting a 1053 error.   Is Crystal RAS 9 compatible with Windows 2003 server?

I do not believe 6X is supported in a 64 bit environment.
IF you are doing a fresh install on a different server, it should be easy to migrate your applications using the migration wizard in EAS. You can migrate applications, security everything except data. TO do that the easiest way is to export it and import into the application on the ner server.

Similar Messages

  • Crystal Ras 9 on Windows 2003 Server, IIS6.0, single threaded?

    We have just migrated from Windows 2000 server to Windows 2003 Server over the weekend. We ran into an issue with Crystal Ras 9.0 where the server serving up reports slower that our previous box. We are using IIS 6.0 and .net 2.0 framework with 1.1 installed for backward compat on our some of our old legacy codes. From what our developers can tell, the issue seems to be Crystal Ras queuing up the request and process them one at a time. That didn't happen before the migration. In fact, we also saw it working in our test environment before the migration. Once the pool is filled no further reports are generated which causes all report to stop which also starts to hang our server. They symptoms is worst under heavy user load. We tested with 6 simultaneous users and all 6 are done at the same time no matter the size of the report. Even the one that fail with an error message came up at the exact same time.
    Are there anyway we can adjust the IIS pools and or Crystal Ras to support additional threads?  We are connecting to Windows 2008 SQL Server EE. Any suggestions and or help is appreciated. I cannot find any references that would help us diagnose this further.
    Also, if you can also detail the cost to buying a phone case, that would be helpful as well.
    Thanks
    -atiwat

    Since you are not changing the version of RAS, I am not sure why the queuing would be different on different Operating Systems? You may want to check on how the queuing is setup on the WIN 200 server and duplicate that on the WIN 2003 server. Also, RAS has a limited number of licenses out of the box. Ensure that you are using the same license on both environments.
    Re. phone support. You can obtain a phone case here:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    However, please note that support of version 9 products terminated years ago, so you will not be able to get support for your version. To get phone support, you will have to upgrade to a supported version of RAS (XI r2 at minimum).
    Ludek
    BTW.; Windows 2008 SQL Server EE came way after RAS / CR 9 and has thus not been tested in this environment...

  • Is WebI 2.7.5 compatible with Windows 2003 Server?

    Currently have WebI 2.7.5 installed on a Windows 2000 Server and working fine.
    Is WebI 2.7.5 compatible with a Windows 2003 Server?
    Thank you.

    Hi Craig,
    - Not supported means that particular version of Operating System is officially not tested (Product Group has not tested any report with that version) i.e. it may or may not work at users end.
    - If it woks at your end and you will get some issues (like error message or other server related issues) then BO support will not able to assist you as the version of OS which you are using is not officially tested at BOu2019s end.
    Regards,
    Deepti Bajpai

  • Which Versions of SQL are compatible with windows 2003 server?

    I just purchased SQL 2014 standard and tried to install on my Windows 2003 standard R2 VM server.  It will not install and now I'm finding some places on the internet that say it's not compatible????  
    Is this true?
    And if so what version of SQL can I install on my windows 2003 standard R2 VM server???

    Hello,
    You can install SQL Server 2008 R2 or earlier versions of SQL Server only on a Windows Server 2003 R2 computer.
    SQL Server 2008 and SQL Server 2008 R2 can be installed on Windows Server 2003 R2 if you apply SP2 for Windows Server 2003 R2.
    Meanwhile SQL Server 2005 requires Windows Server 2003 R2 Service Pack 1.
    SQL Server 2000 can be installed on Windows Server 2003 R2 with no service pack.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • After installing Crystal Reports XI on Windows 2003 server with one error..

    After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error.  I had to regsvr it manually.  Crystal still didn't run.  Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services.  Thanks.

    Thank you for sharing your finding. Very much appreciated.
    The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
    As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
    Ludek

  • Is BPC 7.0 compatible with Windows Terminal Server 2008?

    Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

    BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
    -Brian

  • IDES 46E with windows 2003 server Installation errors..

    Hi,
    Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
    1.Windows 2003 Server
    2.JDK.142
    3.Oracle 9.0.2 with 7 patch
    4.IDES 46E
    Installed successfully Database and SAP but while exporting data in to tables then getting errors.
    Thanks in advance..
    Sreedhar

    Hi GreetZ,
    I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
    Thanks for your replies..
    Sreedhar

  • Is Apps compatible with Windows Terminal Server

    Hi
    Is Apps (any version but most importantly 11i) and for that matter the Database compatible with Windows Terminal Server? I am working with a company who are trying to determine if their IT strategy with Oracle is watertight moving forward, and we have early indications that the answer to the above, is 'No', but it would be nice to have a definitive answer... Anyone know of any resources that I can look at to obtain the above?
    Thanks and Best Regards
    Toby Hazlewood

    No. This is not supported
    Rajesh Alex

  • Crystal report problem on window 2003 server

    Hi
    We had developed a web based application using .Net 2.0 (C#) , Crystal reports (bundled version within VS2005) on Window XP, SQL Server 2005, we are able to see all the reports on this development enviroment, but when the application is deployed on Windows 2003 server , IIS 6.0 and SQL server 2005 , we are not able to view the reports we are thrown with an error as
    Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for SQL Server Description: Procedure or Function 'sp_xxxx' expects parameter '@ppppp', which was not supplied. SQL State: 42000 Native Error: Failed to open a rowset. Error in File
    Could you please explain what the problem is ? as we are stuck with this problem for the migration of application to the user community.
    Regards
    varma

    We have same problem
    does anyone have the answer?

  • How to install 11.5.10 on VMWare with Windows 2003 Server?

    Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
    I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
    The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
    (1) How do I make the laptop's CD drive and HD visible to the VMWare?
    (2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
    (3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
    Any help is appreciated.
    FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
    Any inputs?
    Thx,
    Jags

    Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
    I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
    The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
    (1) How do I make the laptop's CD drive and HD visible to the VMWare?
    (2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
    (3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
    Any help is appreciated.
    FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
    Any inputs?
    Thx,
    Jags

  • DLU with Windows 2003 server

    I am going to be blustery only to provide you with the most info as
    possible.
    I have setup a Windows 2003 server for terminal services. Installed the
    latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
    zfdagent.msi from zfd4.01.ir7.
    The setup is similar to any WindowsXP machine and I have done this a
    thousand times. I have verified that the DLU policy set for the container
    includes a DLU for Windows 2000 and Windows 2000 Terminal Services. Okay I
    should be able to login and have zenworks create a local users acount but
    it does not.
    Here are the differences that may effect the proper operation of desktop
    management:
    a. I have this terminal server setup as a member server in our AD domain -
    only to connect to the TS License Manager.
    b. I have setup the Netware client location policy | login profile |
    Windows Tab | to login in to the local Win2k3 server NOT the domain - and
    of course the username field is empty.
    c. Then I install the ZfdAgent.msi - when the intsaller gets to the
    MiddleTier section - I usally click next and ignore this area, however
    this time around the installer will not continue unless I enter an IP
    address into the Middle Tier server field.
    Other than the above - fairly standard install.
    Any help appreciated.
    Regards
    Ross.

    > I have setup a Windows 2003 server for terminal services. Installed the
    > latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
    > zfdagent.msi from zfd4.01.ir7.
    Windows 2003 is not supported with ZfD4.x.
    You must use at least the Agent from Zen 6.5.
    Regards
    Rolf Lidvall
    Swedish Radio (Ltd)

  • How to setup SMBX client for work with Windows 2003 server's shared folders?

    Dear community,
    Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
    How should I set up SMBX? Is there manual?
    I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
    Thank you  in advance

    Hi,
    Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
    https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
    Manual steps to clear the records.
    Dnsmgmt.msc [Dns Management]
    A.Expand the forward lookup zones\_msdcs folder
    i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
    ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
    iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
    iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
    v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
    vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
    vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
    viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
    B.Expand the forward lookup zones\domain.com folder
    i.Delete Host(A) records of dc’s which are non-existant.
    ii.Correct the NameServer (NS) records
    iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
    · Dssite.msc [Sites and Services]
    A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
    B.Delete incorrect subnet configurations [Sites\Subnets]
    C.Delete incorrect site links [Sites\IP]
    · Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
    · Force replication – ‘repadmin /syncall’

  • Challenges with the TREX Stack 14 with Windows 2003 Server

    Hi
    I have been struggling with the TREX installation on Windows 2003 server and are note able to get the green icon for the HTTP server.
    I have been searching this Forum and seen a lot of topics on this issue, but unfortunately I am not able to solve it.
    On my server I have installed the following components:
    EP stack 14
    SAP R/3
    SAP ITS
    If anyone have any ideas of how to solve my case - I will be very pleased
    Regards
    Kay-Arne S. Aarlie

    Hi
    We have managed to solve this issue
    First i set the security settings for my trex_instance folder "C:\usr\sap\trex_06". Here i added the user IWAM_"MyHost" which is the "Launch IIS Process Account". Gave it the permissions for "Read & Execute, List Folder Content, Read" and then hit the button "Advanced" - selected the user once more and "Apply" - "OK" - "OK".
    In the IIS and its properties for Web Sites and Services i set the checkbox for "Run WWW service in IIS 5.0 isolation mode".
    Restarted the IIS and the TREX HTTPServer went green and I was also able to use the ITS.
    Regards
    Kay-Arne

  • Authentication with Windows 2003 server

    Hi there,
    I am looking for achieve this task. I would like to know How I could authenticate users accesing by my wireless network? I mean in windows 2003 server. They must type their username and password. I want to restricted users which are not on the list to access by my wireless network. I know that in windows 2000 I could use radius server. Could I use it here?.
    Also, I guess that I have to allow these "new users" in AD.
    I am looking forward to read helpfull information here and of course I will give it a rate (points)
    Any ideas are welcome.
    Thanks
    Wladimir

    Same thing for 2003, it is called IAS (Internet Authentication Service).
    http://www.microsoft.com/technet/network/ias/default.mspx
    Basically you will set up IAS with a RADIUS Client which would be your wireless access point(s). Then you will set up a remote access policy which will define how connections are authorized or rejected (windows groups, protocols etc.). Don't forget to register IAS with active directory.

  • Oracle with Windows 2003 server

    Hi all,
    I am using oracle 10g /windows 2003 Server with latest patches, the problem is whenever i restart the server instance does not start automatically , i have to start the instance manually.
    how could i troubleshoot the problem , oracle not generating any error log for this, there is no information in alertlog.
    when i chek the db service in services.msc it said , service started and automatic.
    Thanks in advance
    Salai Thenagan Jayavelu

    go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
    Anil Malkai

Maybe you are looking for