Is CS3 Design Standard compatible with Windows 7 64-bits and MS Office 2010 Pro Plus?

Hi,
I have been googling around to see if Adobe CS3 Design Standard is compatible with Windows 7 64-bits with MS Office 2010 Pro Plus, but I couldn't find a decent answer.
If anyone here has any idea on this, please let me know.
As far as i know Adobe CS3 comes with Adobe Acrobat 8 Pro which is not compatible with MS Office 2010, so I am sort of worried that I will need to upgrade my CS3 to CS6.
Any advises are welcome.
Thanks.

I don't know if Acrobat 8 is Win 7 64 bit compatible or if it's supported. The rest of the apps should be fine.
But I do think you'll have issues with Office 2010 files being placed into InDesign.
Moving to CS6 is something you should be thinking about very soon. You only get upgrade pricing until the end of the year, but I highly recommend taking a look at Creative Cloud. At $29.99/month for the first year it's a bargain.
Bob

Similar Messages

  • Is cs5 design standard compatible with windows 8?

    does anyone know if cs5 design standard can be installed on window 8?

    Yes it can be installed on Win 8.
    Mylenium

  • Is Adobe Creative Suite 5 Design Standard compatible with Yosemite 10.10?

    Is Adobe Creative Suite 5 Design Standard compatible with Yosemite 10.10?

    Yes/ No/ Maybe/ Perhaps. You will find out when you install. There are known technical issues, but most of them can be fixed or bypassed.
    Mylenium

  • Can Adobe Dreamweaver CS3 be made compatible with Windows 7?

    Can Adobe Dreamweaver CS3 be made compatible with Windows 7

    You might need to run it in compatibility mode.
    http://windows.microsoft.com/en-us/windows7/make-older-programs-run-in-this-version-of-win dows
    Nancy O.

  • How do i know if my itunes is compatible with windows 64 bit?

    How do i know if my itunes is compatible with windows 64 bit?

    Did you download the 64-bit installer?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Tutor 14 with Windows 8.1 and MS Office 2013

    Hi all,
    Have anybody used Tutor Author and Publisher with Windows 8.1 and MS Office 2013? Are there any known issues/compatibility issues with this? Any information on this is greatly appreciated.
    thanks in advance,
    SD

    That would be great! I would really appreciate if you can try this. I am having trouble creating the master index and desk manual index from tutor Publisher. I have tried with multiple machines but i am running into winkey error. I am already working with oracle for this, but there has been no progress. Kindly update once you are done testing or if you are able to use it without any issues.
    thanks in advance,
    SD

  • Activating office 2010 pro plus with kms server

    i installed an office 2010 pro plus kms client key on my client but 
    cscript OSPP.vbs /dsstatus shows this
    Microsoft (R) Windows Script Host Version 5.8
    Copyright (C) Microsoft Corporation. All rights reserved.
    ---Processing--------------------------
    SKU ID: 6f327760-8c5c-417c-9b61-836a98287e0c
    LICENSE NAME: Office 14, OfficeProPlus-KMS_Client edition
    LICENSE DESCRIPTION: Office 14, VOLUME_KMSCLIENT channel
    LICENSE STATUS:  ---OOB_GRACE---
    ERROR CODE: 0x4004F00C
    ERROR DESCRIPTION: The Software Licensing Service reported that the application
    is running within the valid grace period.
    Last 5 characters of installed product key: H3GVB
    REMAINING GRACE: 29 days  (42057 minute(s) before expiring)
    ---Exiting-----------------------------
    why is it showing it is in grace period and not activated on the kms server?
    I have already installed the kms server key following this
    http://blogs.technet.com/b/odsupport/archive/2010/06/01/office-2010-kms-installation-and-troubleshooting.aspx
    thanks

    what does the client side need. Do they need a kms key? how do I check
    on the KMSclient, and/or on the KMShost, to check, you can use:
    cscript slmgr.vbs /dli all > c:\kmsout.txt
    (this will output all possible Windows and Office licenses to the output file, and shows the status of each)
    When you install Windows or Office by using VL media, by default these are pre-configured with KMSclient product key.
    In case the machine may have been reconfigured with a different product key, and you find that you need to reconfigure back to a KMSclient product key, the Office KMSclient product keys are here:
    Office 2010:
    http://technet.microsoft.com/en-us/library/ee624355(v=office.14)#section2_3
    Office 2013:
    http://technet.microsoft.com/en-us/library/dn385360(v=office.15).aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Upgrade Office 2010 Standard to Office 2010 Pro Plus using Config.xml

    Hello,
    I am upgrading Office 2010 Standard to Office 2010 Pro Plus. But after using the below config  pro plus did get installed but both versions of Office 2010 ( Stand and Plus ) show up on the machines. I want only Office Pro plus to appear.
    The second issue is that even after uninstalling  Office 2010 Standard from the Control panel the Office shows activation of both ( Going to --File ---Help)
    How can I edit this config.xml to remove office 2010 Standard first and then upgrade to Office 2010 Pro Plus?
    <Configuration Product="ProPlus">
     <Display Level="None" CompletionNotice="No" SuppressModal="Yes" AcceptEula="Yes" />
     <!-- <Logging Type="standard" Path="%temp%" Template="Microsoft Office Professional Plus Setup(*).txt" /> -->
     <!-- <USERNAME Value="Customer" /> -->
     <PIDKEY Value="aaaa-aaa-aaa-aaa" />
     <COMPANYNAME Value="XYZ Co." />
     <Setting Id="AUTO_ACTIVATE" Value="1" />
     <!-- <INSTALLLOCATION Value="%programfiles%\Microsoft Office" /> -->
     <!-- <LIS CACHEACTION="CacheOnly" /> -->
     <!-- <LIS SOURCELIST="\\server1\share\Office;\\server2\share\Office" /> -->
     <!-- <DistributionPoint Location="\\server\share\Office" /> -->
     <!-- <OptionState Id="OptionID" State="absent" Children="force" /> -->
     <!-- <Setting Id="SETUP_REBOOT" Value="IfNeeded" /> -->
     <!-- <Command Path="%windir%\system32\msiexec.exe" Args="/i
    \\server\share\my.msi" QuietArg="/q" ChainPosition="after" Execute="install" /> -->
    </Configuration>

    Hi,
    Here is not a Config.xml solution, but we can use it as a workaround, basically automate the uninstallation of Office 2010, reboot the computer and then deploy Office 2010. You may find the following article useful if you need more info on that.
    http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx
    Regards,
    George Zhao
    TechNet Community Support

  • Photoshop CS3 Web Premium compatible with Windows 8.1

    I have just received a new Computer with Windows 8.1 and want to install Photoshop CS3 Web Premium on it. Are there any issues with this Operating System and Photoshop CS3 Web Premium?

    Are there any issues with this Operating System and Photoshop CS3 Web Premium?
    You bet there are. Starting with Win 7 the print engine and certain other parts of Windows have changed and naturally the new security menchanisms may require compatibility modes and a lot of trickery already upon install. It's not impossible, but issues should definitely be expected - some small, some more critical.
    Mylenium

  • Adobe Creative Suite 3 Design Standard compatible with MAC OS 10.10.2?

    I have the Adobe Creative Suite 3 Design Standard, but when I need to print from Adobe illustrator CS3 it will popup the following error
    Anyone can help?

    You are welcome, Priscilla.
    If you have upgraded to Yosemite without reinstalling CS3, you may uninstall in the same way as you normally uninstall, then install again in the same way as when you first installed it. You may rn the Cleanar Tool in between, to be on the safe side with regard to strange things lingering, but it should be unnecessary if everything has worked before the Yosemite upgrade.
    http://www.adobe.com/support/contact/cscleanertool.html
    As mentioned, you should update your CS3:
    http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
    Concerning drivers I have no clue, I am afraid, being too silly to use a Mac.

  • Is Adobe Creative Suite 6 Design standard compatible with mac yosemite OS X?

    Hello!
    My Mac OS X is Version 10.6.8 and I want to update the software to yosemite! Now I´m worried if all my programs from Adobe Creative Suite 6: Design Standard still works with Yosemite? or If i will have troubles or if I have to install all the programs again?!
    Thanks

    Same question, same answer: You won't know until you try. There are some known issues with Yosemite compatibility in any Adobe program, including CC products, but the specifics will depend on the details. Either way, make sure to deactivate before upgrading and then reinstall CS6 afterwards.
    Mylenium

  • Is labview 5 compatible with Windows XP home and professional version?

    Can i install labview 5.0 on a windows XP environment- home and professional version?
    Also is labview 5.0 and 7.0 compatible with Celerons? Or is there any difficulty?
    Please clarify

    They all work fine in these environs. The only trouble you may run into is temporary files not being accessible if the user logged in is not an administrator or the vi was created by an admin and a limited user tries to run it. This can easily be fixed by giving lower users permissions to use these files. The legacy versions of NI-DAQ do not run on XP though, you'll have to use a more recent version of them.
    2006 Ultimate LabVIEW G-eek.

  • Windows Camera compatible with Windows Vista, 7, and 8 in WPF

    Hey everyone,
    I am working on a Desktop application that uses DirectShow. It worked fine until we ran it on a Surface tablet in Windows 8. I need a way to control the camera rotation and DirectShow makes it quite difficult to implement.
    I would now like to update it to something that is better supported. Media Framework seems to be the solution but the examples I have found seem to apply to Win8, and work as Windows Store Apps. 
    Does anyone know of some good example code that would help me figure out how to implement using a basic camera to take pictures in a Windows Desktop App, and easily access camera rotation? Alternatively, does anyone know of a 3rd party provider that has
    a camera solution I could purchase to incorporate into my code?
    Thanks,

    Hi kemp77,
    I have read your issue and it is related with
    General Windows Desktop Development Issues forum. Please reopen a new thread there.
    Thank you for your understanding!
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is creative suite 3 design standard compatible with yosemite?

    I bought creative suit 3 in 2008 and it was installed on my Imac. I changed my mac for a Mac book Pro this year with Yosemite on it. When I try to install my creative suite it gives me error messages and the windows are blurred. Any idea to help me? Thank you

    you can check other users' experience, http://roaringapps.com/apps:table

  • CS3 Design Standard Crashing with Lion

    I need help!  My CS3 was working fine until recently.  I can't print from Illustrator or InDesign, EVERY TIME I click to print, the software CRASHES!  At times it will CRASH upon launching.  I've unistalled/reinstalled, ran the CS Cleaner Tool, all to NO avail.  I'd really appreciate help - I need my software!! 

    Remove the following files and back them up: 
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/en.lproj
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/Ja.lproj
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/ko.lproj
    [Hard Drive]/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj
    and then check

Maybe you are looking for

  • SAP R/3 and BW reports

    Hi, One of our clients is wanting to know what all reports SAP R/3 and SAP BW can generate for an industry. It will be great if any of you can help us with some presentation/link/document where we will find relevant information (material of any infor

  • Messages and Details are both greyed out

    Now I can't go back to Messages (all) and select which ones I want to delete and neither can I get any details for the message I'm on! Now I'm wishing I hadn't upgraded to iOS8.x and also to Yosemite for that matter.

  • Alt+SysReq REISUB not working

    Despite the fact that /etc/sysctl.d/99-sysctl.conf contains: kernel.sysrq=1 and cat /proc/sys/kernel/sysrq confirms this is set by displaying: 1 The magic key combo merely appears to kill the X server and I go back to lightdm greeter for logging back

  • Is there a way to sync non purchased music to my iPhone?

    I am so lost.. Please help! Have tried dragging .. have tried "add to iphone" and i am only trying to get music from a CD i imported On my phone! Thanks!

  • Close period Account Payable

    Dear sir, Now, I dont know how to close period Account Payable (February, 2008) Please show me the Tcode and step by step guide docs to close period. Thank for your help Minhtb