Is DAMO has issues with win7 64 bit

Hello,
we are impelmenting DAMO for our users, it works fine with Win XP/7 32 bit, but got some issue with win7 64 bit, its not creating MAPI profile, at the end of installation it shows
error, "Failed to create a new MAPI profile. ", After that it displays "Setup encountered an error
and failed to create a new MAPI profile. You will need to reinstall IBM Lotus Domino Access for Microsoft Outlook."
please pass solution if you have any...
Thanks!
vipul

Do you have a virus scanner, can you exclude .nsf files from scanning.
When installing the damo client software do not put in the normal Program files area as I believe windows 7 will not allow permissions to be changed without asking every time, so tis could be causing issues with temp files etc at setup.
When setting up user profile it will ask where to save the user files, change from default profile area to some other created area of the disk you know you have access to, suggest making a path c:\damo\username\
Also install lotus notes normal client and make sure your ID is ok using basic client.
Thanks.
Tony Chen
TechNet Community Support

Similar Messages

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

hi,
my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
Anyone facing the same issue? Thanks.

Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

Lion / Safari 5.1 has issues with the pinch/zoom (embedded links don't zoom correctly)

Ever since upgrading to Lion Safari 5.1 has issues with the pinch/zoom. Any embedded link does not zoom in proportion to the surrounding page and it makes it unusable. (the embedded link zooms much more). Any ideas? This makes safari almost unusable for many webpages.
Is there a fix to this? Or can I consider uninstalling 5.1 and rolling Safari back to 5.05? Not sure if this is a Lion issue or a Safari issue. Everything worked great prior to Lion.
(I have to say, Lion has been more annoying than beneficial to this point!)

Here are 2 screenshots of the issue (before and after a zoom) see how the add in the first one that shows 25% off in the first picture zoomed too large after the zoom to see the whole thing?

Memory Leak Issue With Win7 64 bit and Youtube.

I have a Win7 64 bit using IE9 with version 11.4.402.265 installed. 4 MB installed.
Whenever I go to Youtube or Liveleak, and watch videos, over time it uses up to 4gigs of my memory! Even if I close the window, it does not free up the memory until I Ctrl/Alt/Delete and shut down the window(s).
I normally only keep open 1-2 windows. Google toolbar is about the only thing installed. I can open 5 and more tabs, but as long as the site does not use flash, I don't have issues and each window usually uses under 200k memory watching them in task manager.
When I go to open and watch a youtube video, it slowly climbs to 200k and within an hour, I can be at 2 gigs or more memory and up to 4 gigs within 2 hours (or sometimes much sooner). Closing the window does not release the memory until I end task on it and then after a minute or so, the memory seems to clear and everything is back to normal.
I searched the forums and seems lots of users, report memory leaks, some using yahoo toolbar installed, which is not my case. I do use yahoo as my e-mail address, no idea if that is related or not. I had the same issue when I had the prior Flash version installed, this has been going on for months. Right now having only this window open, using 129, 192 memory. If I open one more window (using the 64 or 32 bit browser) and start youtube, the memory in that window keeps climbing about 50-100kb a second, so it adds up quickly. I have kaspersky running in the background and that is about it other then my nvida driver setup.
Really frustrating that so many people here and across the internet have reported this. I did have IE8 a few weeks ago and still had the same issue, upgraded to IE9 to see if that helped.
Interesting side note, if I pause a video, it slows way down on the memory leak, but still rises at a slower pace. I don't know if this is an IE thing or Flash. I have had this setup since 2009 and don't recall having issues with IE7. I use Youtube so much as a teaching instrument as a music teacher, so constantly have lessons going on it.
Thanks and hope someone has come up with something. I also build computers and have done some programming, so I could modify a file if needed with clear instructions.

This could be similar to bug https://bugbase.adobe.com/index.cfm?event=bug&id=3334814

Ipod has issues with Sleeping and Backlight

Hello, i'm having some issues with my ipod, (Nano 4th gen, assuming you already knew that because of the forum i posted in :D)
Anyways, a couple of days ago, i was using my Ipod, and i paused it for a bit. When i looked back a minute later i noticed the backlight was on even though i set it to turn off every 2 seconds. I reset it (menu+center) and played a couple songs, paused it and it did the same. The Backlight remained on even though the setting was as mentioned.
I ignored it, and maybe 4 days later, i hit the Sleep option on the menu, the iPod turned off, then started turning itself on and off repeatedly, even while i had the lock switched on. I reset it, and tried to turn it off with the Sleep option and it keeps turning itself on and off. If i try to make it Sleep with the Play/Pause button, it will do the same.
Now earlier i went to the Debug (or w/e it is) menu, (Menu+Center, Select+Left) to mess around and see if i could find anything weird there and went to IO>IOSTATUS, and noticed that USBDETECT was flickering between 1 and 0, but i don't know if that explains whats going on with my ipod
Thanks in advance, and please help me fix my ipod! xD

Honestly, I have no clue what's happening with your iPod. But on mine, I have the same kind, I did the same thing and went to IOSTATUS and under usb detect for me it just says 0 so maybe that has something to do with it. I hope you manage to get it to work again.

Latest 12.1.1.4 itune updates has issues with syncing to iPhone 6 Plus

I was one of those folks wary of upgrading to iTunes 12 at first but once I did I actually liked it. I especially liked the fact that my frequent syncing problems seemed to have gone away.
Sadly, these problems came back with 12.1.1.4. For the life of me, the latest iTunes version would not recognize my iPhone 6 Plus or it did but when you tried to apply a sync, it lost visibility of my phone.
In exasperation I tried to get the older version from the Apple Website but for reasons that boggle my mind, they no longer had the 64 bit version of 12.0.1. Only the 32 bit version which would not install on my 64 bit Windows 8 OS.
I was able to find a 64 bit version of 12.0.1 on some other site I found while googling (and this is why I have a virus checker. :-P) and re-installing that worked great. As soon as I ran it, it recognized my iPhone and I could sync like a fiend.
Has anyone come across this issue with 12.1.1.4? I am staying pat with 12.0.1 until Apple fixes the issue.
I know that bugs will happen in software but given the level of importance of syncing ones phone, this really is a feature that needs to be rock solid. Not only that, but the older versions of the software really need to be properly available on the Apple Web site.
Ian

Hello Mirochi,
I am sorry to hear you are having these issues with your iPhone 6 Plus. If you continue to have issues with a looping Trust notification, you may want to try resetting the Lockdown folder, as outlined in the following article:
iTunes: How to reset the Lockdown folder - Apple Support
If you have further issues with your iPhone not being recognized in iTunes, you may find the troubleshooting steps outlined in following article helpful as well:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Sincerely,
- Brenden

Issues with 64 bit win 7 clients printing from 2008 R2 print server

Hello All,
I have a Windows 2008 R2 SP1 64 bit server built with a print server role. My issue is 64 bit win 7 clients cannot add a new printer. The clients see the printer in the list, starts the printer installation, get to the point of downloading the
driver & then fails ' Windows cannot connect to the printer. ' the error is 0x0000012 or 0x000003ee. Any way I try to add the new printer I get the same result. The only way I can get the printer added is to do a local printer with the full path \\servername\printer_name
and then "have disk" and point to the driver folder on the print server to get the printer added.
Anyone have any thoughts on why the 64 bit clients will not add a new printer from a 64 bit print server ?
Thanks,
Steve

Hi Steve,
Please check if you can ping the print server successfully from this Windows 7 client computer. Did you encounter
the same issue when add other printers? Or just for this one printer?
Please type
regedit on Run to open Registry Editor and follow the path:
HKEY_CURRENT_USER\Printers\Connections and check if there has existent printer connection on the registry key.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Uiadump32 - issue with 64 bit windows 7 recovery?

My daughter has a HP DV6 Laptop model 2010sa.
The hard drive has failed but when we use the recovery disks we get an error about uiadump32 failing.
When I use the recovery DVDs for the laptop, it loads them and then restarts a couple of times. BUT, when it gets to the windows setup screen, listing "Preparing driver installation" etc, a failure occurs. uiadump32.exe has stopped working.
From other research it seems existing partitions can be an issue, but the drive was wiped using fdisk on a linux live boot before installation. It looks to me like the recovery manager needs to be updated in some way (WIndows 7 is 64 bit on this laptop).
Any one a solution?
Thanks

Hi,
Assuming this is just an issue with the recovery process, there's a straight forward work-around you may want to consider.
Before trying the following, make sure you can still read the Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version of Windows that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional software and drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot use min-max-close buttons in top of screen after loading new web page, also has issues with videos. Does work fine oddly after shrinking the window and re-opening it from the taskbar...

Issues with firefox where it wouldn't respond to above mentioned tasks, its like its clicking through the browser sometimes to screens behind it, or with drop down menus, it opens the menu up, but you click an option and it'll click on whatever the drop down menu is cover up. My computer has been running rather ragged lately which makes me think its a virus, I do have anti-virus and have tried a couple of programs to clean whatever it is up. I've also tried reinstalling firefox and that doesn't seem to help either.

In Firefox 4 and later Safe mode disables extensions and disables hardware acceleration.
*http://kb.mozillazine.org/Safe_mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Windows 7 on e9280t has issues with Realtek HD audio drivers

This is driving me crazy. My PC runs great, but there is obviously an issue with the drivers for Realtek and Win 7. Sometimes I have sound, sometimes I don't. You just never know. Most of the time it doesn't even register that I have speakers. I've tried downloaded the driver from the HP site. I've also tried downloading the driver from Realtek's site. Nothing has worked yet. Still no sound. Anyone have any clue what might be causing this, or if there is a fix in the works?
http://twitter.com/cthemenway

Try this. Right click on the Audio icon in the tray. Then, click Properties. This opens the 'Sounds and Audio Devices Properties'. Check all of the settings to assure they are correct. You may have to change the settings one at a time to see if one of them does the trick. When I have had a problem with the speakers not being recognized, it was incorrect speakers chosen.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Exporting from PPro CC - Exporting using Match Sequence Settings issue with 24 bit audio

I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.

Always skip Match Sequence Settings and set up the export manually.

Anyone else has issues with BC App Store?

Hi All,
Has anyone else had issues with the BC App Store?
Long story short I hope:
We purchased Client Trainer through the App Store, the app didn't get applied to our account and we waited over an hour before contacting support. Once we contacted support, we were told that the Database on the server had issues and that was the reason why the App wasn't added, but it was now fixed and we needed to the Fresh Install. We logged in and could see that both the Update and Fresh Install buttons where available, we clicked on Fresh Install the OAuth window opened up with the App Name: Client Trainer (version 1.0.2), App Developer: BC Gurus and Website: which meant to be a live search, we double clicked the input field, nothing happened... Began typing the name of the website... Nothing happened. We then tried a different web browser, nothing happened. We contacted BC support thinking that because it was an OAuth issue to contact them but no, it's not we needed to contact BC App Store support who is owned by BC Gurus. A few emails back and forward between us and support and as I write this post we get another email saying "i have to extend this to Adobe. I should hear back from them early next week. Thank you for your patience.".
I'm really not happy with the fact that BC App Store is maintained by a 3rd party provider, BC support won't help, BC Gurus can't do anything until Adobe helps them with the issue. I was really looking forward to developing BC Apps, however this has made me not want to develop and I think Adobe need to take over the running of the BC App Store if they want it to take off.

Hi Kati,
Thanks for the notes on your issue. I completely understand your frustration and apologize for any inconvenience this is causing your business.
I have found your tickets and am looking into the issue. I can assure you that we take running the App Store very seriously and have worked hard with Adobe engineering to make the purchase and distribution of apps seamless. You are right that some of the issues that come in have to be resolved in collaboration with BC engineering and that is the case with this issue. I'm not sure why you are not getting any sites in the oAuth window - but I know that we'll be able to resolve that as soon as possible. We're still in the early days of the project and continue to come across edge cases that cause problems. We want these resolved for good.
In the future, if you could direct all App Store related issues directly to BC App Store support, that will save a step if these types of issues come up in the future. The general retail BC support has little to no connection to the under-workings of the App Store - in these early stages, it's imperative that my team is able to get the issue as soon as possible in order to investigate and escalate to our contacts in BC engineering, if the issue is on their side.
While I understand your concerns about a 3rd party running the marketplace, I hope that we have been able to prove our business in the BC market over the last 6 years. Not only that, but I think most partners would agree they would rather have BC engineers focused on core platform than operation of the App Store.
I hope that you will still consider developing apps for the platform in the future. If you have any questions, don't hesitate to email me directly: [email protected]
Thanks again for your patience on this issue.

SBH80 Bluetooth connectivity issue with Win7

hi,
i am not able to connect my Sony Bluetooth headset SBH-80 with my VAIO laptop with Win7 OS.
Do let me know the solution.

Hi rohankhera，
What is your current situation？
Have you tried the solution as Rick Dee mentioned？
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Is DAMO has issues with win7 64 bit

Similar Messages

Maybe you are looking for