Is Data Services XI 4.0 compatible with BW 7.01

Hi,
The documentation of Data Services XI 4.0 says the following:
The SAP BusinessObjects Data Services XI 4.0 (version 14.0.0 and above) Open Hub feature is
supported in SAP BW 7.01 patch level 003 and above.
Does this mean that Data Services XI 4.0 is only compatible with open hub feature of BW 7.01 and not compatible with the full version of BW 7.01
Thanks

Hi,
As far as I know, Data Services XI 5.0 supports complete SAP Bw connectivity.
That is, it supports both SAP BW as a source (open hub) asd target (datasource).
Regards,
Balajee

Similar Messages

Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?

HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adil

Hi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil

CVP 7.0(2) web service element, is it compatible with WCF

I'm looking for documentation on the Web Service element in CVP 7.0(2).
The element specs guide for 7.0 doesn't have any thing on it only the 8.0 guide, what does this mean.
Should I just build something Java?
I will be using it with microsoft WCF to pass dialer-voicemail call results to our inhouse database, any advise?
I know that it is compatible with WSDL or SOAP models but I would like to see usage samples, etc.
thanks

I am sure the element specs for CVP 8.0 which describe the Web Service Element are applicable to 7.x. Cisco had not updated that document since 2008 and then it was an Audium document with no Cisco changes. So I think that what you read here about the three "technologies" it can talk to is accurate.
There is probably more discussion on the use of this element at the CVP Developer's forum.
I've always rolled my own with Web service calls - using Apache HTTP Client as the transport and JAXB for the parsing and marshaling, but this is because I tackled this problem at CVP 3.0, when there was no Web service element. So I developed an architecture and stayed with it. But I would like to explore the built-in WS element.
Some samples would be good.
Regards,
Geoff

Data Services IDOC Errors when working with a newl Basic Type

Hello,
Just wondering if anyone else has encountered an issue similar to the one I am dealing with. We are trying to create business partners in SAP CRM from Data Services via IDOC. We are not using the standard IDOC, but instead we are using a new IDOC type.
This IDOC type is generated by SAP CRM automatically through a transaction BDFG. This transaction creates a new basic type for an standard IDOC with the additional fields that we have added through the easy enhancement workbench (EEWB).
The issue that we are having is that when we import the IDOC type into data services and we look at the schema many fields and sub-structures of the IDOC are duplicated. This means that we receive hundreds of errors when we try to validate our data flow. I can delete the duplicated sub structures in my query transformation but then the query transformation and the output schema and the idoc input schema are no longer identical.
I have searched all over oss and different web forums for a solution but no one else it seems has even encountered this error. If anyone else has had a similar issue and can offer help it would be greatly appreciated.
Bill

Issue is resolved.
After importing the meta data for the IDOC into data services I then proceeded to edit out all of the duplicate structures and fields from the IDOC.
After making the IDOC structure in data services identical to the structure of the IDOC in SAP I then proceeded to test this IDOC and it executed successfully.

BO Data Services 3.2-Job fails with 'TNS:No appropriate service handler err

Hello all -
One of our DS jobs has started failing intermittently showing the following error in its log:
Data flow DataFlow_1 - OCI call <OCIServerAttach> for connection <abc> failed: <ORA-12519: TNS:no appropriate service handler found>.
This has started happening recently after we've upgraded the repository database form Oracle 10g to Oracle 11g (11.1.0.6). The source and target are also 11g.
If anyone has encountered this error before, please can you provide some pointers on how to troubleshoot/resolve this.
TIA.
Regards,
Tarun.

I have found this thread which talks nearly same about your issue.
TNS:listener could not find available handler witht matching protocol stack
The session count has to be decreased, that is the crux that comes out from this thread.
Listener some how have a count of the incoming connection request. If that number tries to go beyond process parameter value,this error is reported.Now I amnot sure that why this is happening in your case as the parameter value is already higher than the incoming connections.
And voilla!You are using XE I believe so its a bug in it. Read this thread,
Re: Intermittent ORA-12519 error on 10g XE
HTH
Aman....

Windows xp service pack 3 not compatible with 10.6

I have windows xp service pack 3. When I try to play music on Itunes 10.6, it just makes garbage. What is the highest version of itunes I can run.

iTunes (the current version) requires Windows XP SP2 and higher.
The version of iTunes is not the issue.
Does playing the media in other media players, like Windows Media Player, result in the same garbage?

Data service (DB adapter) returns XML with missing collection's content

Hello.
I am facing problem with DB adapter connected to MySQL database.
When I use select from 1-2 tables (connected by master-detail relationship) adapter works fine.
When I use more than 2 tables adapter returns only master table and empty detail collections.
This is example of 2 tables (master-detail) response
<BasketItemCollection>
<BasketItem>
<basketItemId>234</basketItemId>
<loggedUserId>126</loggedUserId>
<itemTitle>itemTitle</itemTitle>
<itemPartNo/>
<itemPrice>301.26</itemPrice>
<itemVat>0.0</itemVat>
<itemQty>1</itemQty>
<itemNote/>
<dateInsert>2009-10-08T16:07:30.000+02:00</dateInsert>
<basketInvoiceId>44</basketInvoiceId>
<documents>
<docId>560</docId>
<dateCreated>2011-08-23T09:14:52.000+02:00</dateCreated>
<available>false</available>
<passwordProtected xsi:nil="true"/>
</documents>
</BasketItem>
</BasketItemCollection>
This is example of response after adding 1 master table
<BasketInvoiceCollection>
<BasketInvoice>
<basketInvoiceId>44</basketInvoiceId>
<browserId>371</browserId>
<loggedUserId>126</loggedUserId>
<createDate>2009-10-08T16:08:17.000+02:00</createDate>
<statusId>7</statusId>
<deliveryCompany xsi:nil="true"/>
<deliveryName>Alena Molnarova</deliveryName>
<deliveryStreet>fgh</deliveryStreet>
<deliveryCity>fgh</deliveryCity>
<deliveryZip>9054</deliveryZip>
<deliveryCountry>fghfgh</deliveryCountry>
<internalInvoiceId xsi:nil="true"/>
<userNote>fghfgh</userNote>
<userLng>sk</userLng>
<paymentMethod>cash_on_delivery</paymentMethod>
<deliveryMethod>Prevzatie tovaru osobne</deliveryMethod>
<htmlCode xsi:nil="true"/>
<currency>skk</currency>
<basketItemCollection/>
</BasketInvoice>
</BasketInvoiceCollection>
basketItemCollection is here empty.
Where can be a problem hidden?
Thanks in advance for any help

Hi.
JDeveloper use aliase names for tables by default so aliases t0, t1, t3 are used for tables basketinvoice, basketitem, documents.
I think there is some connection to table. Collection of basketinvoicepayments table is missing when 3 tables select and 2 tables select too.
Table basketinvoicepayments is child table and it's element is missing even when relationship is 1:M or 1:1 (Foreign Key on Child table).

Can we install Business Objects Data Services XI 3.2 with BOE 3.1 SP2

Hi,
I want to install SAP Data Services XI 3.2 and BW 7.1 and BOE 3.1 SP2 are already in place. I want to know befor installation of Data Services that it is compatible with BOE 3.1 SP2. The documentation for Data services tell only about the compatibility of BW and not about BOE. If anybody has installed Data Services XI 3.2 with BOE 3.1 or knows about version compatibility, please shed some light.

Yes,
I have tried install BOE 3.1 SP2 and DS 3.2 SP2 together on 1 machine Windows 2003 64 bit before.
They works fine together.
Just make sure you deploy Tomcat correctly for DS Management Console.
Hope this helps,
Henry Le

Would a BW functional developer be able to support data services?

Hi gurus,
Our company cannot justify having a full time data services functional developer to support our existing master data address cleanse / address validation process in data services. There is light work for customizing data services jobs and occasional support work for address validation issues. We have a full staff of SAP developers in most areas and are looking to train an existing employee to do two roles. Not being well versed in what is involved with data services support, can you help with what skill set would be a good complement to also learn data services? Would it be a BW functional developer? ABAP developer? Basis? Master Data functional developer?
Warm Regards,
CM

Hello
In general, the most effective Data Services developers have a 'proper' development background and understand set theory, relational databases, and SQL.
You'll also need to find someone with an understanding of data quality theory.
Michael

LiveCycle Data Services for Java EE 4.6 now available

I'm pleased to announce the general availability of LiveCycle Data Services version 4.6. It is the latest update to the JEE or LiveCycle version of Data Services and it is a feature-rich major release, including expanded support for mobile applications (HTML5/JavaScript, native iOS and Java/Google Android), adds an SAP Connector, introduces managed remoting, and enhancements to model driven development and the offline synchronization framework.
For more information check out the following two sites:
Product overview on Adobe.com: http://www.adobe.com/products/livecycle/dataservices/
LiveCycle Developer Center on the Adobe Developer Connection: http://www.adobe.com/devnet/livecycle/dataservices.html
For existing customers with maintenance and support contracts, the Data Services 4.6 release along with Flash Builder 4.6 has been automatically pushed into your Licence Web Site (LWS) account. This includes ADEP/Livecycle V10 customers that have licence rights to Data Services.
Juergen Hauser - Sr. Product Manager - LiveCycle Data Services

This certification is currently being evaluated for upgrade to a new version. At this time, I cannot give a definitive answer about whether or not there will be an EE 6 version. We also do not have any info on retirement of the EE 5 version. I don't expect that this certification will retire terribly soon, as it is still getting a good amount of traffic. I'm sorry, I realize that my answer is not very informative or helpful, but that is the only info I have at this time. If you are interested in this certification, I would recommend that you go ahead and go for it. Even if we do end up retiring the certification path, the certification remains valid. It remains on your list of certifications in CertView and you can continue to use the OCM logo.
If you are worried about getting 1/2 way through the path and having the path retire, I can tell you that we typically provide at least 3 months notice for a retiring exam/certification path. This path may require extra time because of the length of time that it takes to complete this certification path. Whenever this certification path is set to retire, we will make every effort to contact all candidates who are working on the certification at that time, so always be sure that your email address is updated and correct in your Pearson VUE profile.
Regards,
Brandye Barrington
Certification Forum Moderator

Error while executing logical data service:XP0006

Hi,
 
I have one physical dataservice which is caps.ds based on oracle database. I created one method in caps.ds by name gatCap(String param). basically this method will fetch the data from the database based on input parameter. This method is working fine in physical data service. . Now I created one logical dataservice named as Test.ds from this physical dataservice. I added one method getCaps(string param) method in Test.ds. Noe if i try to test this method in workshop I am getting the following error. .System error
weblogic.xml.query.exceptions.XQueryTypeException: ld:NewDSProj/Test.ds, line 26, column 5: {err}XP0006: "element {ld:NewDSProj/Caps}Caps { {http://www.w3.org/2001/XMLSchema}anyType }": bad value for type element {ld:NewDSProj/Test}Test { {http://www.w3.org/2001/XMLSchema}anyType }* 
Even in Query Plan also it is showing TypeError in red color.
 
I am attaching the capa.ds, Test.ds and required .xsd file and server log file for your reference.
 Any suggestiins please...
 
Regards,
Suresh Varma.

Hi I changed the return type in Test.ds to caps.xsd. It is working fine. Thank you. 
Now I have the following data services. 
1.MRM_RESPONSE.ds--which is created from java method.This java method will read the data from xml. 
2.Caps.ds--which is created for Oracle data base. 
Now I created one logical data service named as Test.ds with function newFunction(String param).My intention is i want consolidated output from both physical data services based on join condition. I have the state field in both physical data services. So the output of newFunction() in Test.ds should be combination of caps and MRM_RESPONSE. In Query plan for newFunction() I am not getting any error. But if I try to test I am getting the following error. System error
weblogic.xml.query.exceptions.XQueryTypeException: {bea-err}TYPE003 [{bea-err}TYPE003a]: Runtime Type Mismatch: got an xdt:untypedAtomic value .
I am attaching latest code and server log file for your reference. In the attached zip file NewSchemas is the schemain schemas project.JavaClient contains java method.
 
Thanks& Regards,
Suresh Varma.

Error in Data Services tutorial

In the "Before You Begin" section of the Flex Data Services
tutorial in "Getting Started with Flex", the first bullet is
incorrect. It text should be:
"Ensure that you have installed the Flex Data Services Beta 3
release and that you can run the applications in the samples web
application."
The installation instructions are located here:
http://www.adobe.com/go/flex2_installation
The tutorial zip file is located here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip
- Mike Peterson
Adobe Flex documentation team

Just a slight correction...
>
Niels Weigel wrote:
> You need to have a subscribtion to the US Address Directories, as they are not free of charge.
>
> You can download them on the SAP Support Portal --> Downloads --> SAP Installations & Upgrades
> Choose Entry by applications on the left hand navigation
> Choose SAP BusinessObjects packages and products
> Go to the last Entry Address Directories
> Go to BOBJ ADDR DIR US
> Go to BOBJ ADDR US 2004-2008
> Go to Installation
> Choose Download Tab
> Choose BOBJ ADDRESS DATA - UNITED STATES 2004-2008 CASS MAY-09 (EXE for Win, TGZ for Unix) if you are using Data Services XI 3.x
>
> You will get there only if you have a license for the Address Directories - USA.
>
> Niels
The 2009 CASS version will not be used until the Data Services XI 3.2 release.
Thanks,
Brandon

Flex Data Services tutorial error

In the "Before You Begin" section of the Flex Data Services
tutorial in "Getting Started with Flex", the first bullet is
incorrect. It text should be:
"Ensure that you have installed the Flex Data Services Beta 3
release and that you can run the applications in the samples web
application."
The installation instructions are located here:
http://www.adobe.com/go/flex2_installation
The tutorial zip file is located here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip
- Mike Peterson
Adobe Flex documentation team

Hi, I found some more "issues" with these data services
tutorial.
First of working with the notes example at first I couldn't
get the two browsers to talk to eachother until I found this
comment by funk_sf on the livedocs:
quote:
after some searching, I located a link to the tutorial.zip
here:
http://www.macromedia.com/go/flex2beta1_quickstart_tutorial_zip.
i unzip'd the contents into my samples directory so that I had the
following path: C:\fds2\jrun4\servers\default\samples\tutorials
the xml file in WEB-INF for the standalone flexbuilder 2b3 is
located at C:\fds2\resources\config as mentioned in the comments on
the previous page (
http://livedocs.macromedia.com/labs/1/flex20beta3/00000129.html)
as for creating the tutorial1.mxml file, i created a new Flex
project with the following settings (this is from memory, so
hopefully i recall all the steps right):
File->New Flex Project
How will you flex application access data? -> Flex Data
Services -> Compile application locally in Flex Builder
root folder: C:\fds2\jrun4\servers\default\samples
root url:
http://localhost:8700/samples/
I left the build paths to their defaults (ie. blank)
named the main application file: tutorial1.mxml
output folder: tutorial
output folder url: [blank]
So I followed his advice, deleted my project and made it in
the samples directory and the notes application started to work, so
all appeared good.
Until I was making the Java example and I'm now faced with
the following errors:
Severity Description Resource In Folder Location Creation
Time Id
2 Definition samples.contact:Contact could not be found.
tutorial2.mxml Tutorials line 8 6 juni 2006 16:36:25 20
Severity Description Resource In Folder Location Creation
Time Id
2 Type was not found or was not a compile-time constant:
Contact. tutorial2.mxml Tutorials line 13 6 juni 2006 16:36:25 21
I'm not sure what is happening, I think it can't find the
data service files but I don't know how to make it so that it does
find those files, the manual is still a bit vague on that and when
I try to run this application it just shows a blue (flex) screen.
The code I'm using is straight from the example documentation after
tinkering around for 2 days to get this to work I thought using
original code is the best way to go.
My application tries to run from
http://localhost:8700/samples/bin/tutorial2.html
The documentation states:
Open the following URL in two browser windows:
[L=http://localhost:port/samples/tutorials/tutorial2.mxml
The screenshots in the documentation show:
Window1: /tutorial/tutorial1.mxml
Window2: /dataservice/contact/tutorial_step4.mxml
Now I'm just confused, tutorial1.mxml is my notes application
which was the previous tutorial and there was no mention of a
tutorial_step4.mxml file ?
Someone help me please with where to place these files and
why so I can understand what is happening here.
Thanks :)

Data Services Designer Question

Hi Friends,
I want to sign onto the Data Services Designer without having to connect through the CONSOLE directly. What BOBJ client software will I need to install to be able login into the designer?
I installed the BOBJ Enterprise Client Tools but there was no option to choose the Data Services Designer to log in with.
Any help would be much appreciated.
bobj-wannabee

Hello
I recommend to post this query to the [Enterprise Information Management|Data Services and Data Quality; forum.
This forum is dedicated to topics related to Data Integration (Data Integrator, Data Federator, Text Analysis for Data Integrator, Rapid Marts, and Integration for PeopleSoft Enterprise), Data Quality (Data Quality and Data Insight), and Metadata Management.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Enterprise Information Management queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

Will Leopard's iCal be compatible with Outlook and others?

I've heard the new version of iCal that's shipping with Leopard that is built on a more up-to-date standard will be more compatible with other calendaring programs (sorry, I'm not up on the tech side of electronic calendars).
Does this mean that the new version of iCal will finally allow me to seek and accept meeting invitations with my brethren using Outlook?

Yes and no, for a number of reasons.
iCal has been recoded to conform with the CalDAV standard developed by CalConnect: The Calendar & Scheduling Consortium, of which Apple is a member, along with Google, IBM, the Mozilla Foundation, Novell, Oracle, Symbian, Yahoo and a host of major universities and a set of smaller, specialized organizations. Notably missing: Microsoft.
Of course.
Generally speaking, Microsoft contact and calendaring components are not entirely compatible with each other, a problem aggravated by the several supported releases of the Exchange Server component. Unless and until Microsoft announces its unqualified support—uh, like that is every going to happen—for the CalDAV standard, there is no guarantee or even a substantial likelihood that you will experience trouble-free interchange of calendaring data with Outlook users. Unfortunately, it seems all too true that in Microsoft-speak, 'interoperability' means '…so long as you do it our way.'
The release of iCal with Mac OS X 10.5 and iCal Server with Mac OS X Server 10.5, along with the release of the open source Darwin Calendar Server, should ease this process but, realistically, no one other than Microsoft can explicitly control how their contact and calendaring components will interchange data.
You can learn more about CalConnect, iCal as envisioned under Mac OS X 10.5, and iCal Server, by pressing these embedded links.

Is Data Services XI 4.0 compatible with BW 7.01

Similar Messages

Maybe you are looking for