Is db backup ok if OEM not shut down?

Greetings,
I have an automated backup script that shuts down O9iAS before backuping up the db. I cannot shutdown OEM via script because OEM requires a password.
If I ignore OEM and shut everything else down, will my db backups be ok?
TIA

try to update your graphics drivers or to disable hardware acceleration in firefox under tools > options > advanced > general
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Similar Messages

  • Brtools not shutting down automatically during offline backup

    Dear guru'
    At our work place in Development system we are getting following issue.
    Brtools not shutting down SAP after triggering the Offline backup.
    In brtools it's howing database shutting down statement for long time.......... but  i'ts not doing .
    Keep on showing that ......please give me any solution for that.
    It's happenning since last 2 sundays{ Offline backup}. Previously it was working fine.
    And remaining systems working fine .
    SAP version is ; ECC 6.0, AIX 5.3 & data base 10g.
    We are usinfg Veritas netbackup tool.
    Thanks & regards;
    Rajkumar

    I note that you indicate a Snow Leopard OS which if it is the case, it cannot be a 'new' MBP.  I assume that this may be an older MBP that is new to you.
    Look at these two articles for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    http://support.apple.com/kb/TS2570
    Ciao.

  • Can not shut down late 2011 MacBook Pro and turn it back on again without the hard drive disappearing?

    Ok, I have searched for months for an answer to this question to no avail, probably because no one has experienced it before. I am hoping however that you guys can help me figure this one out cause it is driving me nuts! Also, I am not entirely sure what section of the support I should put this under so if I stick it in the wrong place, I apologize.
    Right now my problem is very simple. When I turn off my laptop, and then try to turn it back on, my internal hard drive disappears... and I get the blinking folder with a question mark on it. I have figured out something interesting however. I have an install disk with Ubuntu Linux on it. If I boot into that first, then RESTART the laptop, not shut down and turn back on, it reads the internal hard drive just fine and I can boot as if there is nothing wrong.
    Second part to the problem... If I allow the laptop in either OSX or Windows to go to sleep (aka shut off the hard drive but the computer remains on), when I attempt to wake it up, I am greeted with the usual log in screen of whichever OS I am in, but is frozen and after a few seconds goes black and restarts the computer to find that... Surprise! The hard drive is gone
    I have tried every trick in the book that I can think of, but can not seem to come up with a solution to the problem... I know when the problem happened and if anyone thinks that that will help them figure this out I will type everything I did up till, including the crash that caused this, and my attempted fixes, but I have class right now so only if you guys want it I will type all that out.
    What I am currently running is:
    2011 MacBook Pro 13in screen
    4Gb of Ram
    1TB internal Hard Drive
    OSX 10.11.whatever the newest update is... just updated the other day again.
    Windows 8.1 on BootCamp 5 (yea I know its not supposed to work but it does) again, fully updated
    Ubuntu 13.10 (I think? Doesn't really matter, its just an install disk I use to boot the computer)
    If there is anything else that you guys need me to provide, I can, just simply ask. I can provide as much info as is necessary.

    Sorry it took me so long to write back, But unfortunately this didn't help my issue.
    My uncle and I did a lot of tests on this computer and have narrowed down the location of the problem a little bit.
    We tried to first reset the SMC and the NVRAM as suggested, but the only thing that did was make the fans run on full tilt for the first session after restarting it for some reason. After that we tried re installing OSX over the OSX that was already on the system (not removing any of the files). This also didn't do anything but make refit stop working. Then we moved onto the next task at hand by removing the hard drive entirely and booting it as an external drive from one of the USB ports... as long as you booted it with the options key held down, it worked perfectly fine. Then we put an alternative hard drive into the computer and installed OSX on that. This time there was no trouble booting anything up. Everything seemed to work flawlessly. So we made a backup of my original drive (OSX, Windows, and all) onto an external hard drive and tested booting to it via USB. That again worked perfectly fine and booted right up with no problems. So after that we formatted the original hard drive and reinstated OSX. We then proceeded to transfer all the old files from the backup onto this new installation and LOW AND BEHOLD..... we were back to square one with it refusing to recognize the hard drive again.
    So this basically told us that there appears to be something either wrong with the hard drive, or something got really screwed up in the software along the lines and by me copying all my old files back over, I just ended up bringing the screwed up file back over with it! (despite not copying over any settings of any kind) So I am still extremely confused as to what is going wrong... did some boot sector possibly get screwed up may be?

  • MacBook Pro (10.7.3) not shutting down after updating to latest iTunes

    This is a bit of a strange one, and after searching high and low, I haven't seen any other references to it, so...here goes:
    I'm working on a MacBook Pro (13-inch, Mid 2010) running OS X 10.7.3, and the complaint is this: the system will not shut down or eject a connected iPod (classic) or smartphone (Verizon Android phone) after updating to the latest version of iTunes.
    I've been troubleshooting this for several days now, and I've tried the following:
    1. Created a new admin account and tested from there. No change.
    2. Created a backup image of the hard drive, erased & reinstalled 10.7, created temp admin account - issue resolved, but iTunes library unable to open because it was modified by a newer version of iTunes.
    3. Ran software update to bring system current (as of 20 April 2012)
    4. Issue reappears after software update.
    5. Reinstalled 10.7.3 from Recovery partition.
    6. Again, issue resolved, but unable to open iTunes library modified by newer version.
    7. Update iTunes, issue returns.
    I actually did several variations of the erase & install routine, as well as several admin accounts, but the basic gyst of it is that after updating iTunes, the system hangs at the spinning gear on shutdown every single time.
    The version of iTunes that is reinstalled with Lion is 10.5.1. I don't know which version between that and 10.6.1 is causing the problem.
    Not sure where to go from here, so I figured I'd throw it out to the community.
    Thanks.

    Well, after throwing my hands up in the air, I returned the MacBook Pro and iPod classic to their owner because I'd held onto them for over a week trying to troubleshoot the issue with no success.
    Two days later, she contacted me and told me her iPod was the culprit -- it had some bad sectors on the hard drive. I had thought to check that, but she had data on the iPod that wasn't backed up anywhere, so I back-burnered that until later.
    Glad to see I'm not going insane, though. ;^)

  • Mac Will Not Shut Down

    I ran Singular past my OS 9.2 drive and it disposed of items that were not duplicates. I rebuilt my system folder from a flash drive. Hard Drive will not shut down. I normally cycle between a drive with OS 10x and my OS 9x in the Startup Disk. Now when I tell it to restart on my OS 10 it will not shut down. I get a Software Update Engine error message with no error code.
    I even reinstalled OS 9.2.2 and it still does it. Even after Norton Utilities.
    To get past it, I option/command/esc to get it to shut off and restart on the other disk.
    Has this happened to any of you?
    Deepsees
    Message was edited by: Deepsees
    Message was edited by: Deepsees

    Thanks for the input. Yes the OS's are on different drives. With all my modeling and animation programs... it would cost me a small fortune to upgrade them, hence OS 9.2.2.
    This all started after telling Singular to dispose of certain duplicated file. It apparently dragged some others out with it. I have a flash drive with the good system 9 that I used to go file by file in the extensions and control panels and made the wiped disk look like the flash drive backup. Corrected a lot except for this not shutting down without using escape. Reinstallation did not stop it.
    The norton is only for 9xx indeed... I am not having trouble with OSX drive at all. When I want to restart to 9xx it does it's restart and into 9xx land. Norton always finds a wall of screwed up blocks and trees... never seemed to be an issue. It raked up the files and fixed what ever these invisible files do. Still same same. We bought the first mac in Jax fl... we have been around this platform ever since. When macs were a bit simpler.. there were only so many things something like this could be. This is the only time I have seen this behavior in a mac.
    I just got in from 500 mile drive.. will go though these responses after a nap.
    Thanks before and after.
    Deepsees
    Message was edited by: Deepsees

  • My macbook pro will not shut down

    Hello,
    please help. I have a brand new computer - MacBook pro - 2.2 GHz, Intel Core i7, Mac OS X 10.6.7. When I bought it, I followed the onscreen instructions and "transferred" my old computer, 4 year old MacBook, onto the new one (my accounts, with all the documents, preferences, etc). Now, for some time, before getting my new computer, I had been experiencing problems on my old one: namely, it was not shutting down and I had to "force" it by pressing the switch. I should have known better than transferring the old comp's settings and accounts onto the new one. I didn't and now my new computer is also not shutting down. Does anyone know how to find where the problem is and how to eliminate it? Do I have to backup all, erase, and reinstall everything or is there a less drastic way to cure my afflicted computer?
    Thank you!
    P.

    Choose Force Quit from the Apple menu and close Outlook from there.
    (123063)

  • My new MacBook Pro does not shut down

    Hello,
    please help. I have a brand new computer - MacBook pro - 2.2 GHz, Intel Core i7, Mac OS X 10.6.7. When I bought it, I followed the onscreen instructions and "transferred" my old computer, 4 year old MacBook, onto the new one (my accounts, with all the documents, preferences, etc). Now, for some time, before getting my new computer, I had been experiencing problems on my old one: namely, it was not shutting down and I had to "force" it by pressing the switch. I should have known better than transferring the old comp's settings and accounts onto the new one. I didn't and now my new computer is also not shutting down. Does anyone know how to find where the problem is and how to eliminate it? Do I have to backup all, erase, and reinstall everything or is there a less drastic way to cure my afflicted computer?
    Thank you!
    P.

    Hi,
    running the activity monitor and select System Processes, set the window to see allrunning processes and sort by CPU usage, close all applications that are using and try to shut down your Mac, then identifies what the process that consumes more CPU percentage.
    Regards

  • Mac Pro will not shut down

    As the subject line says, my "early 2008" Mac Pro will not shut down. I have let it set overnight and it will not shut down or restart. I also installed an update which required a restart, selected to restart and the computer would not. Also, whenever I boot up, the computer hangs and will not load the finder. I have to do a "hard" restart and after a couple tries it eventually works...should I just call Apple?

    Forced shutdowns tend to cause more directory errors.
    How many drives?
    Any green version?
    Did you disable "allow disks to spindown"?
    Possible it is an external USB printer or device, or cable?
    I'd boot from another hard drive and do system  repair and maintenance.
    Create another boot volume if need be.
    Startup with using Disk utility but also Disk Warrior.
    And when it is working, make backups with CCC or SuperDuper.
    Lacking that, boot from OS X DVD and go to Utility menu and access Disk Utility.

  • Database is not shutting down Hanging

    Hi All,
    Shutdown immediate
    Database is not shutting down it is switching the logfile from past 30min's
    Checkpoint not complete
    Current log# 1 seq# 758 mem# 0: /opt/oracle/oradata/itest10g/redo01.log
    Thread 1 advanced to log sequence 759
    Current log# 2 seq# 759 mem# 0: /opt/oracle/oradata/itest10g/redo02.log
    Thu Nov 16 17:56:53 2006
    Waiting for smon to disable tx recovery.
    Thu Nov 16 17:57:37 2006
    Thread 1 cannot allocate new log, sequence 760
    Checkpoint not complete
    Current log# 2 seq# 759 mem# 0: /opt/oracle/oradata/itest10g/redo02.log
    Thread 1 advanced to log sequence 760
    Current log# 3 seq# 760 mem# 0: /opt/oracle/oradata/itest10g/redo03.log
    Can anyone please reply why is this happening
    is it because of less logfiles because we have three logfile only or because of log_buffer...
    Thanks in Advance for the reply.

    user644122 wrote:
    Hi,
    Since a month database is getting down at 19:00 hours daily automatically.
    and in alert log it shows the followoing error:
    Shutting down instance: further logons disabled
    Shutting down instance (immediate)
    License high water mark = 56
    Mon Sep 22 19:00:42 2008
    with diff high water mark....and processes are 700 and sessions are defined 750 in init.para file...could you please suggest why is it happening ?
    ThanksCheck cron job and other scheduled jobs on your database server. The database is shutdown gracefully not by accident or crash. Maybe a old backup script?

  • Macbook Pro not shutting down

    2011 Macbook Pro with Lion
    I only notice the problem with the system not shutting down or restarting, it goes to the grey screen and the I see the spining icon at the bottom of the screen only when I open itunes and have my external seagate goflex 2tb connected through firewire. All my audio and video files for itunes are stored onto the external drive. I can properlly shut down or restart the system with external drive connected for backups or anything else but not after opening itunes.
    Below is from the system log:
    Jan 16 20:26:28 MacBook-Pro [0x0-0x27027].com.apple.iTunes[642]: The plugin 'Quartz Composer Visualizer' failed to load because it has the wrong CPU architecture for this version of iTunes. (3585)
    Jan 16 20:40:31 MacBook-Pro [0x0-0x27027].com.apple.iTunes[642]: Version from driver for Certificates 1
    Jan 16 20:40:55 MacBook-Pro com.apple.launchd.peruser.501[135] (com.apple.talagent[146]): Exited: Killed: 9
    Jan 16 20:40:55 MacBook-Pro com.apple.launchd.peruser.501[135] ([0x0-0xc00c].com.apple.iTunesHelper[193]): Exited: Killed: 9
    Jan 16 20:40:55 MacBook-Pro com.apple.launchd.peruser.501[135] ([0x0-0x1b01b].com.apple.AppleSpell[247]): Exited: Killed: 9
    Jan 16 20:40:55 MacBook-Pro com.apple.launchd.peruser.501[135] (com.apple.mdworker.pool.0[280]): Exited: Terminated: 15
    Jan 16 20:40:55 MacBook-Pro loginwindow[42]: DEAD_PROCESS: 42 console
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: 2012-01-16 20:40:55.302 com.apple.dock.extra[671:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: 2012-01-16 20:40:55.303 com.apple.dock.extra[671:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: 2012-01-16 20:40:55.303 com.apple.dock.extra[671:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:55 MacBook-Pro com.apple.dock.extra[671]: 2012-01-16 20:40:55.304 com.apple.dock.extra[671:1707] Could not connect the action buttonPressed: to target of class NSApplication
    Jan 16 20:40:57 MacBook-Pro xpchelper[672]: for uid: 501 -- timeout while waiting on FSEvents flush; clearing cache.
    Jan 16 20:40:57 MacBook-Pro xpchelper[674]: for uid: 0 -- timeout while waiting on FSEvents flush; clearing cache.
    Jan 16 20:40:57 MacBook-Pro airportd[673]: _doAutoJoin: Already associated to “AndroidAP”. Bailing on auto-join.
    Jan 16 20:40:58 MacBook-Pro loginwindow[42]: Application hardKill returned -600
    Jan 16 20:40:58: --- last message repeated 1 time ---
    Jan 16 20:40:58 MacBook-Pro shutdown[675]: halt by :
    Jan 16 20:40:58 MacBook-Pro shutdown[675]: SHUTDOWN_TIME: 1326768058 386754

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
    Launch the application(s) and test. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Iphone 4s will not shut down.  Constant reboot unless powered.  I have done a full restore (losing half my apps) that helped for a while but now back to the same problem

    My iphone 4s will not shut down?  Please help??

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • Macbook will not shut down (bought new in June)

    I saw some other threads on this. Mine will not shut down and I have the latest software updates on Leopard, bought my 13 in. Macbook in June. I have run it a lot, so that it gets warm but seemed to work fine until I try to shut down. I'm really worried about this because I hate to have to force it to shut down by turning it off. I do not have that third party program installed that someone said he'd downloaded and had to remove to get it to work. I hope I don't have to uninstall what little I have installed, such as Intego firewall/antvirus/personal backup, Camino, Sunbird, Flip4Mac, Washing Machine, and Io programs by Time Cycles. I don't run any of those other programs much, mostly just Safari and just now an HP printer driver. I wonder if doing a lot of scanning using the HP printer driver is what caused the problem. I just downloaded the HP printer driver right before this happened, I think. But I really need that to work.
    My computer starts to hang when I shut it down and says it can't log out until I shut down something else, which is generally a program that is not even running. I wish this would stop; I'm not sure what to do about it or whether turning the computer off will hurt it. I don't know if I'm supposed to "zap PRAM" or something but I already did that for a different reason a few days ago and don't want to do that a lot.

    Thanks for your message. I actually just logged in to report that I solved the issue by going to Disk Utility / First Aid / verify permissions/ repair permissions.
    The problem was that the HP Officejet 7300 Series printer driver I had recently installed had all sorts of permissions wrong and they are now repaired. And the Macbook has now shut down properly twice in a row. I wonder if I should report that to HP?
    ** I wonder what damage if any I did by shutting off the computer using the power button two or three times in the past 24 hours when I needed to shut the computer down prior to repairing the permissions problem?*
    And I did see the Activity Monitor in the Utilities section on my own just prior to trying Disk Utility / first aid / repair permissions (the disk it self didn't need repair, supposedly). I don't really think activity monitor was going to help in this instance because I did shut down all the programs, but I'll be testing that utility in the future.
    I bet now would be a good time to hurry up and get Disk Warrior.

  • I connected my iphone 4s that i unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. it told me it needed 8 hours. i closed my laptop. not shut down. i opened and it wants restorin?

    I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).

    Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.

  • My iPod touch will not shut down to the black screen which causes my battery to drain with in an hour?

    My iPod touch will not shut down automatically which causes my battery to drain within hours? HELP

    Have you went to Settings>General>Auto-Lock and specified a shot time?

  • HP Pavilion P7-1141 will not shut down... Any thoughts?

    Brand new HP Pavilion P7-1141 desktop (AMD A8-3800 quad-core CPU, 8GB RAM, 1TB HDD, Radeon HD 6550D, Windows 7 64-bit) will not shut down properly regardless of what I do - I can press on/off button on the desktop, or choose "shut down" from Windows 7 menu, each time the following happens: Windows shows it's usual "shutting down" screen, then screen goes blank and monitor goes to sleep, but the desktop itself still seems to be working in some unusual mode: fans are rotating - I hear the usual quiet noise from them, the lights on the desktop are on, however, no hard drive activity at all. In this mode, the desktop can't be turned on anymore - I need to press on/off button for a few seconds to turn it off completely or unplug the power cable and plug it back and only after that it can be turned on. Windows will not show any error messages during startup, HP diagnosticks program does not find any issues, no error messages of any kind. I checked power settings in Windows, played with power settings in BIOS without any success. Am I missing something? Any ideas?
    UPDATE: Sleep mode doesn't work as well. When I choose "sleep" from Windows 7 menu, exactly the same thing happens (monitor goes to sleep, fans are rotating, the lights on the desktop are on, no hard drive activity, etc). At least when I choose "restart" it restarts without any problems.

    Hi:
    See if  (re) installing the chipset driver helps.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-97610-1&cc=us&dlc=en&lc=en&...=
    Paul

Maybe you are looking for