Is DB/SE supported for message persistence through OEMS?

Hi all,
I'm in the process of designing an high availability configuration for ESB.
We will use Oracle database RAC for the metadata repository and for message persistence through Oracle Enterprise Messaging Service (OEMS) as well.
I'm considering to use the Oracle Database Standard Edition (SE) for clustering (Although the license policy for SE not only depends on the number of processor sockets but also on the MCM's since the 1st of May!)
Does anyone know if the database standard edition is officially supported for message persistence through OEMS?
Thanks in advance,
Jeroen van Schaijk

Hi Scott,
as I know the only difference in the partnr. is:
370-xxxx Sun StorEdge 3510 FC Array (Non-RoHS)
371-xxxx Sun StorEdge 3510 FC Array RoHS
hth
Gerhard

Similar Messages

Transaction Support for message broker channel

Hi all,
I have created a JPD and subscribing to an MB channel and listening for messages, suppose the message is delivered to the JPD i.e onMessage is invoked successfully, but at the next node there is an exception thrown, so I want to rollback all the stuff done and also pushback the message to the channel, (and if possible get the message back to the JPD by retrying the entire tranaction).
1. Can the message be pushed back to the channel?
2. Will the channel try to send the same message again to the JPD incase we rollback and wait again at onMessage in the same JPD by means of exceptional path (retry count)?
3. Is the message available for consumption for other subscribers incase we are able to pushback the message to the channel?
4. Bottomline - How can I include the MB channel(message delivery) within transactional boundary?
TIA
Abhishek

Hi kai/All,
Thanks for ur response, but I still have some questions.
1. If the message is not going to be pushed back to the channel, what exactly do we mean by "retry"(is it that I have to resubscribe(and wait at onMessage call in my subscriber jpd) to the channel, and wait for the same message to be pusblished by the publisher JPD)?
Also my requirement is - I am having number of subscriber(JPD instances say workflow JPDs) to the same channel and using filters to deliver the message to the appropriate workflow JPD instance, So, One and only one instance can listen for a particular message, so incase there is an exception in a particular workflow JPD, no other instance can cover for it beacuse of a particualr filter value for the message subscription. How can I overcome this shortcoming?
TIA
Abhishek

Software Updates support for Windows XP through SCCM

Hi
As we all know Windows XP end of life support is approaching, I am hoping that someone may be able to help me understand what will happen once this has ended.
We have a customer who has purchased the extended support for 1yr, What I need to understand is, what will the process be to release Windows XP Patches to customers who have purchased the extended support.
We currently use SCCM SUP for the deployments, I am assuming that this will not be the process going forward so what is Microsoft's view on managing this for paid customers and how do we manage it?
Many Thanks
Ann

I beieve I heard awhile back that there's a tool sumilar to SCUP that will be available for those who have purchased an extended support contract.
This was what I had heard from other customers was done for Windows 2000 updates and XP SP2 updates after the expiration of SP2 support.
There's a
thread in the WSUS forum related to Windows 2000 that discusses this (once you get past all the confusion and convolution regarding the original issue), and that thread references
another thread in the CM2007 Software Updates forum related to post-SP2 updates for Windows XP.
From what I can get from these articles, it's a self-contained import tool that reads a Microsoft-supplied CAB that contains the contract updates.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Is Support for 9i RDBMS in OEM going to be dropped ?

How many customers run their critical apps on so called "old" 9i RDBMS databases ?
We have a few in our company. One of the reasons for not upgrading is because we have too much invested in it and the world appears to have become very change averse when it comes to continual migrations to new products. The old "if it aint broke, dont fix it" idea, where IT spend is tight, is actually proving to be quite a saving in the short term.
I am starting to see cracks in the OEM armour. The 10.2.0.5 agent has a bug that causes core dumps and other issues with 9.2.0.7 RDBMS targets. In some scenario's this is a ticking bomb where an agent happily monitors a lower release, then it gets patched and the monitoring tools start to hose the alert log and get incident management teams pointing the finger at the tools guy... Oracle's response is to patch the database, however in what world do we live in when a monitoring tool forces the monitored target into a patch or forget it mode of working? The development cycles in Oracle appear to be very much focused on "next release" productivity and are increasingly causing us in-life support pain in having to justify why they should fix bugs in their products that they sell us.
Given that there is little change in 9.2 where 9.2.0.8 is the last release and OEM 10.2 has extensive support until 2014, are we being sold short ? The support matrix for the agents at 10.2.0.5 wont certify anything less that 9.2.0.8 now, but funnily enough, they do support 9.2.0.7 as a repository for OEM... Without getting into too much "is it certified or not" discussion, I just think that OEM development need to tread carefully with "new features" where the cost of them is dropping old ones that were bought by the customer for a very specific reason.
Upshot is that running at 10.2.0.4 agent will support 9.2.0.7, and 10.2.0.5 agent wont do this without backport/engineering assistance which is being resisted.
So how can I support OEM if I cant patch agents to 10.2.0.5 ?
I love oracle products, I've made a career out of doing so, but I find it extremely frustrating for a monitoring product to be allowed to dismiss certain versions of targets under the banner of progress. Perhaps do this in an 11g release of oem, but not half way through the evolution of 10.2 !
Edited by: broughp on Feb 10, 2010 11:13 PM
Edited by: broughp on Feb 10, 2010 11:25 PM

very much appreciated thanks.
Just a word though as an avid nokia/symbian fan, the new partnership with microsoft must surely make those in symbian development feel a little dejected but hey guys this is your opportunity to buck your ideas up and give us some kickass UI improvements before symbian is gone forever.
You never know if everyone begins raving over how much better s^3/s^4 is in the future the platform may be saved or at least gain a significant extension.
In the words of 'the Kurgon'
"I have somthin' to say- It's better to burn out than to fade away"
Come on guys do your best you know you have to !!!!
If this was helpful please click Star for Kudos
Phone history :-3210, 3100, 3200, 6230i, N73, N95-8GB, N97, N8, Lumia800, Lumia920, Lumia620, Lumia820, Lumia1020, Lumia520, Lumia830, Lumia735

Need help for DB backup through OEM 11g grid

I need to know how to schedule the hot backup of whole DB using OEM 11g grid.
In our system there is a backup running for DB (10gr2). It is not scheduled through jobs.
I am not able to find this scheduled db backup information from OEM.
Can anyone guide me how to check the current backup schedules and backup script ?
Is there any good document for this ?

Hi Dhaval,
You may look out option for restore backup from production and restore the same on QAS.
Refer SAP note
683447
SAP Tools for MS SQL Server
Which shall help you with post restore steps on the database.
Once DB and SAP is up you may perform generic post restore steps like
- STMS re-configuration
- Adjusting profiles
- Executing BDLS
- Importing RFCs and user master ( if exported before the restore)
- Adjusting Partner profiles
- Configuring backup
- Apply SAP license
Above are just a few of them to name. There could be many more as per customer landscape.
Regards,
Deepak Kori

Create support desk message through "Help"

Dear friends,
I am creating support desk message in my Sol Man system through "Help" menu. At that time, system automatically calling transaction type "SLF1".
Now i have created the new transaction type "ZZSL" by copying from SLF1.
Now i want the system to call the new transaction type "ZZSL", when i create a support ticket through "Help".
How to enable this?
Please guide me on this.
Regadrs
Senthil

Dear Anand,
Thank you for the reply. But this one will work, if i create a support desk message through t.code NOTIF_CREATE.
But i am NOT creating the support desk message through the transaction NOTIF_CREATE.
I think you are of aware of creating the support desk message through "Help" menu.
At that time i want to link transaction type "ZZSL".
or..can u give u mail ID ..i will send the screen shots
Senthil

Support Desk Message Creation in SOLUTION MANAGER through External Emails

Hello Experts,
                    I am a ABAP Developer , as mentioned in subject, my part is to Create support desk message in solution manager,through external Emails like outlook Express . To do this task i am in need of more information about some componenets which are used in solution manager support desk Message.
      My Doubts are,
1) What is the use of Ibasecomponent in Message Creation?
2) What if the ibasecomponent is mentioned as a defaut value ' 24 ' ( i.e is the ibasecomponent for solution manager - support desk ) ?
3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
     If anyone has already worked with this subject, please give me some suggestions ASAP.
Thanks in Advance,
Mohana

Hello Mohana,
Let see if I can explain this well:
1) What is the use of Ibasecomponent in Message Creation?
When you define a Solution in the SOLMAN, you need to update your Ibase
Edit->Initial Data transfer for Ibase
This create a tree structure in the ibase IB52, as you can see in the attachment.
You get a componet number for SID-Client
You can configure the SOLMAN in a way that when a message arrives from
<System ID> <Installation Number> <Client> <User Name>
this is what solman knows from a message comming from a satellite, them you
know directly from which component/ibase the message has been received.
This is important data, the component/ibase, for reporting issue, for assigning this component to a sold-to-party (being in IB52, left tree, select a system and go to Goto->Partner you can assign a Sold-to party BP there for example)
2) What if the ibasecomponent is mentioned as a defaut value ' 24 '
By default the SOLMAN system has a Intalled base 01 already created for being used and maintained "automatically":
being in dswp, solution : Edit->Initial Data transfer for Ibase
If not you msut maintain the ibase manually from IB52, this is also possible.
The Ibase 01 is a prconfigured iBase for being used for the SOLMAN application.
Tink that the SOLMAN system is built up a CRM system, so the IBase is CRM matter. SOLMAN is only using some CRM applications to build the Service Desk scenario for example.
I3) To track the system from which the message is created , is ibase required or the SAP component will give those information?
Ibase is required
Hope this helps,
Dolores

Error message during the installation of assembly, refer to help and support for more information: HRESULT :0x80070BC9

I am trying to download iTunes for my ipod touch. Everytime I start the installation proccess I get this error message
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32".version="8.0.50727.4053",publicKeyToken="1fc8b 3b 9a1e 8b 3b", processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: 0x80070BC9
after this error pops up and I click ok the installer back tracks then installs.. my ipod cannot connect with the iTunes that is installed it says I need to uninstall and install iTunes with 64 bit..
I've tried this 3 times and get the same result.. please help ! thanks

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?)

Automation of support desk message for an newly generated BP number

Hi,
I need an application that when an BP number is generated in solution manager automatically some support desk messages have to created and have to assign different ids.
How to automate this.

Hello Kiran,
The only way this could be achieved is through the use of BADI....You need to find a BADI which triggers on sucessfull save of a business partner....
Within this BADI, you need to do a lot of coding which woould in turn create support desk message for you.....and this requires a lot of CRM technical know-how..
Inspire ppl by rewarding !!
Regards,
Anand

Why is there no support for up and down arrow keys when scrolling through presets in adobe raw

seems like it would be common sense to support such a basic function, especially when having to scroll through about 100+ different presets(VSCO Film). We need support for arrow keys so that it may be easier to compare colors much more quickly. Also the support for comparing 2 of the same images would be even more awesome, RAW image on left, and Presets on the right, or compare different presets to one another.

You can submit it as a feature rquest, then forget about and go back to your life.

I got a new card and now I can't purchase any gems for monopoly bingo, I get a message my purchase can't be completed contact support for help

I Have a new card and I'm trying to purchase gems for monopoly bingo, but I get a message that my purchase can't be completed to contact support for help

Click here and ask the iTunes Store staff for assistance.
(124907)

HT201359 After filling out all account information on iTunes, I receive a message telling me to contact iTunes support for help, but do not know why I need help. I simply want to purchase an album that exceeds my credit balance I have. Why can't I finish

After filling out my complete acct info in iTunes Store in order to purchase an album that exceeds the amt of my credit from a gift card, I am prompted to check with the customer support for iTunes, and it will not simply charge my credit card that I provided in full. Why do I need help? I followed the complete procedures asked to add this credit card method of Payment. What is the problem?

We are fellow users here on these forums. You can contact iTunes Support via this link and ask them for help (we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more info

I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
I've attempted to repair my .NET framework, didn't help.
I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
neither one fixed the error.
Any help? Anyone else run into this error? What should I do?
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
BUTTONS:
&Retry
Cancel

Hi Gurmo,
HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
KB article.
I suggest you run the System Update Readiness tool and check if the error still persists.
There is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

The requested action is not supported for this object. [message 131-171]

Hi,
One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
"The requested action is not supported for this object. [message 131-171]"
Any ideas what could be the problem?
Regards,
Mohan

Hi Johnson,
I have not tried your suggestion till now as I am waiting for the database copy from my client.
Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
The report prints fine if it has single invoice even if it is a check payment.
Will your suggestions address this as well?
Regards,
Mohan

Is DB/SE supported for message persistence through OEMS?

Similar Messages

Maybe you are looking for