Is defaulttrace.X.log the only way see what's going on at interaction layer
Greetings!
I'm reading the "Development and extension Guide - SAP E-Commerce 5.0" where I found the excerpt:
The data entered in the added text field has to be retrieved by an Action when the Update button is pressed. In
this step you will find out what happens in the interaction layer when the Update button is pressed.
(page 34)
This excerpt belongs to chapter "Changing the Process Flow", where it is said that one must investigate the flow of events to be able to intercept the process flow.
Is it the only way to look at such flow of events?
Thanks in advance,
Ogata.
Is this a space issue or is it you retention error. Can you check if there is any advice in the alert log to increase the retention policy.
otherwise the best idea is to increase/add additional storage to the disk group. You may also want to implement RMAN back, with archive purge enabled
May I ask what kind of disks /storage are you using? Also have you implemented External redundancy or Normal redundancy. The storage requirements are different in both these situations. And the statistics reported should be read differently depending on the implementation.
Yes you can look at space either from EM, from Sql Plus or from the asmcmd.
For example.
SELECT NAME,STATE,TOTAL_MB,FREE_MB FROM V$ASM_DISKGROUP will give you a highlevel space status.
Similar Messages
-
I have an employee who has an issue when on calls. When he is in a call with someone, he can hear another call beeping in but no name shows up. The only way he can see who called is if they leave a voicemail. He says the phone is up to date with software. Wondering if anyone can help me figure out what is going on.
Morning katesnazzy,
Thanks for using Apple Support Communities.
There are different methods for enabling and using the following features, depending on your wireless carrier's network technology
For more information on this, take a look at this article:
iPhone: Understanding phone features
http://support.apple.com/kb/HT4515
Best of luck,
Mario -
I cant see the filing sharing on itunes and I was wanting to get some ringtones and thats the only way I can use them, where is the filing sharing thing at? even when I sync my phone I cant seee it
File sharing appears at the bottom of the device's apps tab i.e. the tab that you use to select which apps to sync to the device. Connect the iPhone to your computer, select it on the left-hand side of iTunes, and scroll to the bottom of the Apps tab on the right-hand side.
File sharing : http://support.apple.com/kb/ht4094 -
i want them gone. the only way i found to do this is by deleating the ichat.plist but i can't find it anywhere. i have gone through all the plist in preferences and its not there i want these convos gone
Hi,
Go to the Finder's Go Menu > Go to Folder and type in ~/Library/Preferences
This will open the Preferences in the Home Folder's Library.
In Lion this Library is Hidden and you cannot Click you way there.
Delete the com.apple.ichat.plist and it's associated .lockfile (Drag to Trash>
Restart iChat.
I am presuming Lion from what you say despite your specs saying Snow Leopard.
10:52 PM Wednesday; September 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
i want to reset my ipad 2 but in the settings menu/general there is no reset button. this is the only way to restore factory settings from what i can see on internet. can anyone help?
You can restore the device within iTunes on your computer. This article will describe the process for you.
http://support.apple.com/kb/ht1414
On the iPad - Settings>General>Reset>Erase all content and settings -
This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.
-
My iPad is acting funny after 6.1.3 update the only way I see fixing this issue to downgrade but I can't find anything on downgrading
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Help
I upgrated my computer to OS X Mountain Lion last night and since then my computer keeps restarting over and over again. The only way I can use it is by being in Safe Mode. Can you please tell me what I need to do so my computer works perfectly again.
Thank youIf you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Every time I click on a web site that has an email option the browser starts making untitled web pages and never stops unless I turn the computer off. It is very frustrating to not be able to use an email option when offered by a web site. The only way I can send email messages on the Firefox browser is to go into my hotmail acct. and copy and paste the addresses. I don't have this problem when I use the Internet Explorer browser.
See [[Firefox keeps opening many tabs or windows]]
-
If I click on something to open in a new tab or click on someone's email to open Outlook, instead of doing that, a bunch of blank tabs open. I'm fine with a couple blank tabs, but they keep opening. The only way to stop the tabs from opening is to close out of firefox entirely. When I try to reopen firefox, blank tabs again begin to reopen. You can't close out of them fast enough because they keep opening. To stop opening the blank tabs, you must restart firefox a second time.
Is this a virus or something wrong with my firefox settings??Firefox includes options of how to handle different content types, in your case the mailto links are probably set to "Use Firefox". For details of how to fix this see [[Firefox keeps opening many tabs or windows]], in particular the section "Change the action for a content type".
-
hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock itTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple -
I wish to upgrade my Macbook Pro to ML from SL but told the only way to do this is by downloading thru App store. Is it possible to copy ML on to a USB and upgrade that way. I would like to have a back up of the OS installation files just in case i have a problem later. Please help me!
You can create an install disc but you would have to download Mountain Lion to do so..
How to create an OS X 10.8 Mountain Lion install drive | MacFixIt - CNET Reviews
And make sure your Mac can upgrade to Mountain Lion.
See Step 1, 2, and 3, here > Apple - Upgrade your Mac to OS X Mountain Lion. -
working with my 2 FireWire HD i had a crash. the only way to start was a safe start. then id maged to start from a DVD and install a MAC OS 10.3 wich ran 4 some time then the same problem only safeMode. kernel panic by inserting the tech tool DVD, wich produces the following highligted text:
panic(cpu 0 caller =xffff0003): 0x300 - Data access
latest stack backtrace for CPU 0:
Backtrace:
0x0009CC88 0x00D63C 0x00029DAO 0x000BOA10 0x000B4270
proceeding back via exception chain:
Exception state (sv=0x26acd700)
PC=0x2717E900; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x2717EBE4; R1=0x26AD3AE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x27178B0 0x00344ACB 0x00345970 0x2717EC08 0x2718458 0x00340590
0x003496EC 0x0034B59C 0x0034A6BC 0x000B1DD4
Kernel Loadable modules in backtrace (with dependencies):
com.apple.driver.AppleFWDHC1(3.9.5)00x2717c000->0x271aafff
dependency: com.apple.iokit.10PCIFamily(2.6)00x1e840000
dependency: com.apple.iokit.I0FireWireFamily(3.4.7)00x270dd000
Exception state (sv=0x26abd280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000;R1=0x00000000; XCP=0x00000000 (unknown)
BSD process name corresponding to current thread: kernel_task
so what
greetings from berlinGreetings,
It appears to be a FW problem, possibly flaky case, or drive problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
Central 5.4 stops printing, a reboot of the server is the only way to fix the problem
Hi, We are running central 5.4 on windows 2000 SP4, this has worked for ages but has just started with an intermittent fault. When we send some output it suddenly stops printing, and no forms sent to central will be printed, the only way to get them to print is to reboot the server, stopping and starting central has no effect.<br />there seems to be no errors (event viewer etc)apart from below<br /><br />errors in log file<br />2005/05/11 11:20:43 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.<br />2005/05/11 11:20:48 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [306]Processing file 's43719.dat', '^job miteksopr'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [307]Launching task '"D:\jfsrvr\jfmerge" MITEKSOPR.mdf D:\jfsrvr\Data\s43719.dat -l -apr -allD:\jfsrvr\jfserver.log -asl1 -amq0 -amsD:\jfsrvr\Mst\Despatch.mst -m1T -z"HP2280" -axfon -aiiD:\jfsrvr\jfmerge.ini'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3016]Error, unable to obtain document properties.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3008]Error, unable to get info about device 'HP2280' attached to port '<nil>'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](183) Cannot create a file when that file already exists.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [2]Error opening output device/file 'HP2280'.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid.<br /><br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3018]Error ending page on printer.<br />2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [210]Nothing was printed.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [312]Warning: skipping disabled task JfError.<br />2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'.<br />2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.
2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'.
2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened.
2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid
Maybe you are looking for
-
I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!
-
External hard drive is reading as a CD optical drive?
Until recently, I had been using a Clickfree C2N Home Backup Drive successfully to backup both my machines: a MacBook Pro currently running OS X 10.6.8 (my primary computer) and an Asus netbook running Windows XP. I had suspended use of the device fo
-
Make it easier to use Blue Snowball mic with Logic
This post is intended for Apple to see. Perhaps this problem is fixed in Logic Pro/Express 7.2. The Blue Snowball was designed for GarageBand and works great with it, right out of the box. But trying to use it with Logic is like pulling teeth or debu
-
Tell firefox where to find plugins
Is there a way to specifically tell Firefox where it plugins are? OpenSuse 11.4, Firefox 3.6, the flashplayer plugin does not show in the list of plugins so can;t play flash videos. I have downloaded the latest libflashplayer.so and put it in every "
-
Using Adobe Captivate version 6.0, I want to be able to do what I always could in PowerPoint - in a bulleted list, cause each bullet to float (or other animation) into place, establish a timing for each line.