Is delta certification different than a full certification?

Hello experts,
I recently became certified on BW 3.5 and want to become certified on BI 7.0. I understand I can take the delta exam (40 questions) instead of the full BI 7.0 (80 questions). Do both certificatins (delta and full) have the same value? I received an e-mail from SAP stating that the delta has a shorter expiring period (lasts less). Where can I find such information? For how long does a certification lasts and does the delta certificaion lasts less than a full?
Thanks in advance,
Marcio

Thanks gents,
I know the concept of delta as just testing the new concepts, or differences from previous version. Sorry if I was not clear on my question. My doubt is more specifically on for how long each certification is valid. I understoof from SAP that the delta expires first, but I don't understand why and I can't see any info abou it on the websites.
Kind regards,
Marcio

Similar Messages

  • Delta certification or full exam again?

    Hello.
    I am certified in mySAP BI Business Warehouse (Software Component: SAP BW 3.0). I passed the exam five years ago. I would like to be certified in NetWeaver 2004s. Let me know (from the bottom of your heart): should I pass the delta certification exam only, or is it better to pass the full certification exam again? I ask not only about the possibilities SAP gives, but about the professional and human approach as well.
    Please, let me know what do you think about this.
    Thank you in advance,
    Arelis.

    Hi,
    You need to take a full exam.If you choose delta way first you should upgrade you cert to bw 3.5 cert with delta exam then  you will take one more delta exam to get BI 7.0 certification.This also means double cost and effort for you.It is better to take full exam.Please check the links below.
    http://www.sap.com/usa/services/education
    http://www50.sap.com/useducation/certification/examcontent.asp
    Re: SAP BW 3.5 certification help
    Regards.

  • I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

    I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

    Hi Paul ,
    It could be a compatibility issue as well as Acrobat 8 is an older version.
    Do you get any error message while registering for the product?
    Try repairing it and once and also check for updates as well.
    Is it happening with all the word files or any specific one'?
    Regards
    Sukrit Dhingra
    Acrobat 8 and Windows 7 Don't Work

  • 'Play Full Screen' looks different than 'play'  (makes timing errors)

    In iMovie, 'Play Full Screen' behaves differently than 'Play'  Makes timing errors, cuts off the beginning of commentaries, etc.

    You can't disable tap/zoom scaling. What happens if you add a margin and disable thumbnail?
    Can you convert them to a Keynote presentation (Hype?)?
    One option would be to reduce the original video dimensions and add a frame/mask around it before adding into a book, that way when it is expanded, it sits at a smaller size. Bunch of work, maybe, so unless you have higher rez video, that may be your best option.

  • Picture is different than in preview screen

    When I click on one picture in the Photo Screen, it is different than when it is showing multiple pictures at once.  How do I get to show the right picture which is the one in full screen.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

  • Selecting less than a full word

    Is it possible to get an AVDocGetPageText() callback with less than a full word of text?  If I make the selection rectangle smaller than the full word using PDDocCreateTextSelect, it still scales up to the word boundary.  I just wish to see the letters in the selection box, not the full word that ends outside of it.
    Thanks
    Simon

    Napster and all the rest are just as bad. That's why it's such a dangerous thing to make assumptions here that other music download services work the same way as the iTMS.
    What's really great about Microsoft's DRM is that when you have to reinstall Windows and then restore your licenses, it counts against you. Every time you do that (which can be often when you use Windows), it's one more computer authorization. I have a Rio Karma (gotta have gapless playback), and it came with a gift card for a free album from Napter. After a few rounds of trying out different Windows-Linux dual boot options, I ran out of authorizations (as though I'd changed computers) and can no longer play the files.
    At least I learned enough about DRM with my "free" album to forever avoid actually paying for such content.

  • Unpluggin the Ethernet is Different Than Turning Off The Server!

    Hi All,
    I am working with a cFP2020 with a 4 space backplane. I am running Labview 8.0 RT. Have not gotten around to putting in the latest set of CD's I just got sent. I have the whole setup on my desk here and am noticing a potential problem for my application. Was hoping that someone could explain this to me?
    I am building a vehicle, with the cFP on the vehicle and a PC controlling the vehicle. Mostly Im turning on lights and reading sensors on the vehicle, but I am transmitting some commands.
    My perfect world would be that if I lost communication between the vehicle and the PC, that the vehicle would recognize this within a reasonable ammount of time (1-2 seconds) and stop itself. I would like a whole routine for "com failure" to run if that is the case.
    My questions:
    It does not look like I want to use the fieldpoint watchdog because everything I have read indicates that on a watchdog com error, the fieldpoint shuts down. Am I wrong? Should I look further into this?
    I wrote my own watchdog. It sends messages back and forth on shared variables. If a message is late, it turns off a light (using cFP led's on the main module.) The PC VI is running as part of the project. The Vehicle VI (on the cFP) is compiled as an application that runs on startup. I have experimented alot with failure situations. The following work fine:
    - Stopping the PC VI that communicates with the vehicle VI. The light on the cFP turns off fine.
    - Stopping the Shared Varaible Engine. "Undeploy" on the shared varaible in the project. The light turns off fine. Infact both the PC and the Vehicle VI's register the dissconnect with their lights.
    The following does not work right:
    - Unplugging the ethernet link! The VI on the vehicle (cFP) is still running (got another blinking light going), however it takes 11-16 seconds for the light to turn off, indicating the disconnect. This is quite a bit longer than the other methods that work fine (those are about 1-3 seconds). Can anyone think what is going on?
    I know this seems like an essoteric question, but it gets to the protocal for the cFP. Should I be running my PC VI as an application? I am running it in the project.
    Thanks
    Kevan -
    As an aside, is there a way to deploy an application and have it run immediatly upon deploy. I am having to reboot to run the application. I notice different performance if its running from the project v. it running as an app. Since I will be using it as an app in the final product, I want to test it that way.
    Thanks Again -

    Kevan,
    The quick answer is that most NI ethernet protocols are implemented with 10 second timeouts. This is different than the undeploy in that stopping the shared variable engine will send unsubscribe messages rather than timing out. (Note: I am making an assumption on how the shared variable protocol works because it is partially based on the older Logos protocol used in Fieldpoint, and that is how the closing works for Logos).
    As for the watchdogs, there are two watchdogs in [c]FP RT modules; the RT watchdog (which can reboot the controller) and the network communications watchdog (which can set one or more outputs to a desired state on loss of communication).
    For a very rapid communication link disconnect, implement the shared variable as a boolean that has it's state inverted every half second. Have the [c]FP controller read the variable and look for changes in the state of the variable. If the variable does not change at the update rate (with some small margin for timing), then you have probably lost the link prior to getting a full network timeout.
    Regards,
    Aaron

  • Publishing different than preview

    I am working on a training video series about Moodle.  I have carefully previewed the project to confirm that everything is timed correctly and matches the audio.
    However, the published version displays something much different than the preview.  Errors include:
    - 1 slide displays smaller and in the top left corner instead of the full screen area, making all the highlights wrong
    - images from one slide are staying around on another slide
    - transitions (fade in/fade out) do not look right in the published version
    What is going on?

    I publish these videos in mp4 format.
    I do not understand how the publishing mode would be the issue because I have successfully published over 20 videos using the same mp4 mode. These errors seem like a publishing bug that does not happen all the time.
    Am I missing some kind of setting that will allow the publish to produce the same thing that I see when previewing my work?
    Additional errors found with other recent videos:
    - audio cuts in and out (plays correctly during preview)
    - text does not appear (appears during preview)
    Is there any way this could be a computer issue rather than a Captivate issue?  It seems Captivate related since I am publishing from Captivate...sometimes the videos turn out right, sometimes they have these random errors.  However, Captivate does run slowly on my computer - would that be a cause for publishing problems?
    Thank you for any direction that you can provide.

  • HT204266 when try to update applications I get a msg showing the country of purchase different than my country

    when I try to update applications I get a msg showing the country of purchase different than my country, sometime it shows Canada, sometime USA sometime Egypt sometime Lebanon.
    not allowing to update applications
    This problem started showing since the last iOS update of phone ( iOS 6.1 )

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

    I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

    Hi Shawn,
    It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
    The process is easy:
    ) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
    2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
    3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
    IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
    4) Once all of the Setup programs are completed, they will probably have you restart your computer.
    All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
    After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
    Good luck!
    Neeraj Mathur

  • Can one datasource supply delta to more than one data targets?

    Can one datasource supply delta to more than one data targets?

    Hi Alok,
    You can assign only one infosource to one datasource but you can feed any number of data targets based on the requirement from that Infosource. It can be either Delta or Full load. But to do Delta, initially you need to do INIT and then go for Delta. If you have already done full load into a data target, you can go for INIT w/o data transfer there after continue with Delta.
    Hope this helps u...
    Regards,
    KK.

  • Can more than 1 full life cycle implementations be done for a company?

    Hi there,
    Can anybody please tell me if its possible to do more than 1 full life cycle implementation for a company with multiple company codes? From my understanding, SAP life cycle is ASAP methodology, starting from project preparation to go-live. So if I'm implementing sap for 1 company code, I'll be completing 1 full life cycle implementaion. Now if i do the same for another company code, for the same parent company, will that be considered as 2 full life cycle implementation? Kindly help. I'm not so clear about this full life cycle implementation concept.
    Would really appreciate your gekp.
    Awaiting response,
    Fieona

    HI,
             Well I think It is possible but there are two cases.
    If the implementation is in some company code having same business as the company in which initially SAP was implemented and all the business processed are same then in that case it would be called Rollout. In rollout you would only create the Organizational data that is enter prise structure and master data for that company but there will be no new process configuration as all the running process are already there.
    How ever if you talk about the group lets say has two three completely different business for ex AUto mobile and Power and you implemented it initially in Automobile. Now you want to implement in Power generation sector then definately it would be a fresh implementation. In this case the most important is that you will prepare new BBP as all the business process are different. A complete new documentations, new master data , org elements and a different realization phase and testing phase would be there.
    Please correct If I am wrong.

  • Why is the contents of Safari's downloads folder different than the actual folder?

    Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

    Problem is if I delete that .plist I'll delete those downloads.  I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this.  So that begs the question, where is that folder located?  When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different. 

  • I am having a problem with homesharing on my apple tv. The email address on my tv is different than what I am registered with. How do I correct the email address that is being displayed under home sharing on the apple tv?

    Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?

    turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't

Maybe you are looking for