Is Desktop with AMD Processor suitable for SAP ECC6.0?

Hi,
I want to install SAP ECC 6.0, ESS/MSS, EP , NWDI on my desktop.
I have desktop with following configuration.
AMD 3.0 Ghz Processror
4 GB DDR 3 RAM
500 GB Hard Disk
OS:
Windows 2003 Enterprise Server 32 bit
I have tried to install SAP packages on above desktop which fails every time. Prerequisite checks goes fine.
Installation will fail at Step 12.
I dont understand whether the AMD processor will support for SAP or not.
Please help me.

Hi,
Two things:
1. Refer to the Product Availability Matrix for SAP systems at http;//service.sap.com/pam and click on the link for SAP ERP 6.0. This will show you all the product-OS-DB-Processor combinations that SAP supports. Basically, the platforms that are supported by various SAP products. You should only install SAP products on platforms that are listed here.
(FYI - For SAP ERP, Win 2003/32bit is only supported for IA32 processors. check PAM)
2. Still, paste the logs from the SAPInst log file as suggested above and we can tell you in detail what the issue might be.
Regards,
Shitij

Similar Messages

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.

[discussion moved to Using Flash Player forum]

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

Windows requirements for SAP ECC6 EhP7

Hi experts,
we want to install SAP ECC6 EhP7 on Windows Server (2008 or above). I've already checked on the PAM its feasability, with Kernel 7.40. The DB would be Oracle 11.2.0.4.
I've found that for hardware that: 4 CPU ~2GHz each with 10 Gb Memory and 500 Gb Disk is the minimum (tell me if I'm wrong), but now I'm more interested in the software part.
So I'm trying to find info about windows package (language and else) necessary for SAP ECC6.0 EhP7 installation. I tried to find notes about it but in vain...
Could you give me some tips ?
Thank you for your time,
Best regards.
Alexiel.

Hi Divyanshu,
thank you for your help and fast reply and sorry for my late reply, I was busy doing something else.
I'll check your link that seems very insteresting! Thanks for sharing.
Regards,
Alexiel.

Publishing Reports with BO Integration Kit for SAP

Post Author: Daniel Stoerzinger
CA Forum: General
I have the BO Integration Kit for SAP installed locally and have been able to publish the reports to the Enterprise Server. I'm also able to Open Reports from the SAP tab. However, I've created a lot of "test" reports which I no longer want to see in the list of reports. I've removed the reports from BO CMC but the Open Reports tab (SAP) still displays the ones I've removed from CMC. Where is this list stored? Are the report definitions stored within SAP? I've heard that the report definition is stored in SAP and the physical report is saved to the BO Enterprise Server. But no one within our SAP team has any idea and claim these are stored on the BO server.
(Someone tell me I'm not the only one in the universe trying to use Crystal Reports with SAP)

Post Author: Daniel Stoerzinger
CA Forum: General
Thanks to Ingo Hilgefort for a reply to the same question on a very good SAP forum https://www.sdn.sap.com/irj/sdn/forums.
You can use the "Crystal Content Admin workbench" (transaction /crystal/rptadmin) and delete the reports from SAP BW and BOE ins a single step
its part of the Transports of the SAP Integration Kit. You need to import the transports into the BW System

Thermal Paste Necessary with AMD Processor In A Box?

Hi All-
I installed an Athlon 64 3200+ and heatsink on my K8N Neo2; the AMD instructions did not show having to put thermal paste between the CPU and heatsink. PC Gamer also states to only use the existing bundled heat sink as well. I'm not haviing any problems, but is thermal paste recommended for these bundled processors in a box? I had an Intel Prescott 2.4 that I installed the same way (without paste) and it ran flawlessly.
Thank You,
Mike Tschirret

The processor in a box comes with Paste or a pad preapplied to the HS. Yes you really should use what comes with the CPU as that assures your warrenty. Some of us preffer different stuff and as such apply that after removing the goop that comes with the CPU. However you must have something there. No goop = no good.

Linux Operating System - Suitability for SAP

Dear All,
We are evaluating the Linux system for installation of SAP ECC60 , EP and BIW . Please let us know that how the Linux is better than any other OS system i.e. HP-UX, AIX, Solaries etc
Please reply...
Regards
Vimal

I am not an expert but a few chaps here are and love the thing. From my perspective using it it is a very easy thing to use with a lot of possible features due to its open source roots. If you don't like a tool then just find a better one.
Also I am a bit of a memory geek and I do like the way that Linux swaps are very easy to understand, in fact swaps are exactly what they should be, they do not include I/O or all memory is not mapped there to start with and so Linux is eally simple to understand.
As I said I'm not an expert but I am a Basis person of 14 years who finds it very easy to use. You can argue though that you get used to any OS but as some idea, we recommend Linux as the platform of choice now.

Mac PRo with raid card shipped with drive not suitable for raid?

Hi all,
I ordered a Mac Pro with raid card and a 1TB hard drive. The drive which came in the computer was WDC WD1001FALS which is not a hard drive rated for raid usage. On Western Digital's site they suggest using WD1002FBYS.
Is the model WD1001FALS the correct drive which Apple ships although one ordered the raid card?

The WD 640GB Blue, and WD 1TB Black are the only drive options for the mac pro; that's what you choose.
The RE3 (or FBYS) is not an option sold through apple. Buying the raid card, is not going to change the drive.
On whether to use the RE3 over the Blacks, it depends on how you will be using it. From what I've heard, the Blacks are enterprise drives themselves; basically with just a less robust firmware (no TLER). If you will have the drives on 24/7 in a raid 5, then yes, RE3 will probably be better. If not, I think the black will suffice; note the blacks are GREAT drives by themselves anyway.
The apple raid card can connect to both SATA and SAS drives internally, however most times people buying the raid card want to use it for SAS drives. There are a lot more cheaper and possibly a lot more stable options then apple's raid card if you are looking to use SATA drives.
Check amug:
http://www.amug.org/
A common problem with the apple raid card is the battery:
http://store.apple.com/us/product/MA849Z/B?mco=NDc1ODczNw
Lastly about enterprise drives, truthfully I don't see the difference really. I have enterprise drives in a 8-drive raid5 config running 24/7 as a server. 2 drives died on me after about 4 months. To top it off, they died within 10 min of each other, crushing the raid to pieces. Granted they were Seagate ES.2's, it's understandable
The boot drive of the server is a stock desktop WD drive and running 24/7. It's been running for almost 4 years straight.

LABVIEW compatibility with AMD processor

Can LABVIEW be loaded on an embedded PC having an AMD Geod LX800-500 MHz processor. Plz help
Message Edited by vipinsaklani on 12-05-2008 12:57 AM

If you can run a standard windows version (not CE)on your PC you may run labview on it. As I think the geode CPU is x86 compatible. But your CPU is to slow to use windows XP. You may consider using windows 2000 or windows 98, and perhaps labview 7.0 or 7.1. In any case your setup must have sufficient ram, HD, and CPU capacity for your project. If your computer runs windows CE 5.0 you may also use labview, but you need to buy a toolkit and transfer the aplication as an exe file to your host.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

AMD Processor compatibility for CMPXCHG16B feature

Want to Know whether my AMD Athlon 64 X2 4000+ processor is compatible for Windows 8.1 Pro 64 Bit OS as it is mentioned that the processors needs to have CMPXCHG16B compatibility.

Hi,
You can access to the link below to download Windows 8.1 upgrade assistant tool to check whether your can run Windows 8.1.
http://windows.microsoft.com/en-us/windows-8/upgrade-assistant-download-online-faq
Kate Li
TechNet Community Support

Logon problem with Oracle AS Adapter for SAP R/3

Dear All
I am getting below error, when trying to test the SAP Adapter. As seems from the message, its a credential problem, but the same user id/password works fine when using SAP Logon Gui Front-end client.
Any help/pointers highly appreciated.
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(Unknown Source)
at com.sap.mw.jco.JCO$Client.connect(Unknown Source)
at com.sap.mw.jco.JCO$Pool.initPool(Unknown Source)
at com.sap.mw.jco.JCO$PoolManager.getClient(Unknown Source)
at com.sap.mw.jco.JCO$PoolManager.getClient(Unknown Source)
at com.sap.mw.jco.JCO.getClient(Unknown Source)
at com.SAPTest.Main.main(Main.java:35)
Releasing connection
Further inputs/thoughts,
1. This must be a very basic, can it be because my user id/password does not have sufficient privilege?
2. I am using adapters_10131_win32.zip downloaded from Oracle, installed only SAP Adapter and then trying to connect using Adapter Application Explorer.
Regards.

Thank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason.

CS3 Wont Open in Windows 7--AMD Processor Issue--HELP!

After much, much searching I've found there's been a common issue with AMD Processors on Windows 7 and getting CS3 to run correctly. Apparently a patch was created, that fixed the problem for users with similar issues. But the links to those patches are no longer valid.
I have no phone right now, chat aint working--and I can't email Adobe of course, soooo someone please...
The forum I found with those links and explanations is here:
http://www.sevenforums.com/software/25313-adobe-cs3-64-bit-ultimate-3.html
From there, this pretty much describes it:
"Just bought an HP Pavillion Elite with Windows 7 Home Premium and AMD processor. Photoshop CS3 would install but would hang when accessed. Some forums suggested that Photoshop CS3 is incompatible with this AMD processor and Windows 7 (64-bit). I called HP and was told the software is incompatible. I was just about to return my computer when I found this forum. I downloaded and installed the patch. I then opened Photoshop (for the thousandth time) and voila--it FINALLY opened!!!"
I've also found many other isntances of this complaint with AMD Processors--Photoshop gets a window open then goes into Not Responding. All other applications don't open at all (but are visible in my task manager). So it's not really a Photoshop specific complaint but I'm placing it here.
I've updated graphics card, changed the desktop theme to Classic, not Aero, tried running the programs in different compatibility modes, all to no avail.
This patch these guys are mentioning has GOT to be it. Someone help me get back to work!!
thank you all in advance.

I had not tried "run as administator." What the hell is that?! I see where to do it and all, but honestly, these permissions
/security/owner/administrator issues on Windows 7 are nothing short of ridiculous.
Every time I think Microsoft may have finally done something right...
I'll try that again down the road. For the moment, looks like Adobe Acrobat 8 is completely incompatible with Windows 7 and almst impossible to delete from the system. SO first task--restoring factory setttings.
In the meantime I'll speak to that patch for Licenseing:
Solution 1: I ran it, but didn't seem to do anything. There was no confirmation of a successful "install," or what you might call it. Secondly, when running again, I was never prompted to enter 0.
Solution 2: I believe those settings were already set as described and so I couldn't really make any changes.
Solution 3: Those folders don't exist, so couldn't do that one.
For various other reasons I wasn't having luck with the next couple thanks to stupid permissions. I'll try again once I've gotten back up to speed.
But yea, someone out there seems to have found a CS3 patch. Am I at least to presume that CS5 would def. work on my comp, and therefore, CS6 is a shoe-in?

Premiere Elements with AMD-Prozessor without SSE2?

Gibt eine Version von Premiere Elements, die mit einem AMD-Prozessor ohne SSE2 arbeitet?
english: exist a verson of Premiere Elemtns, wich is working with AMD-processor without SSE2

I am sorry Christian.w but the current version offered by Adobe does have this requirement. You can find the current system requirements at http://www.adobe.com/products/premiere-elements/tech-specs.html. This has been a requirement for several versions.

HANA on SLES 11 SP3 for SAP software selection

Hi,
We are planning to install HANA SPS8 on a Vitual Machine with SLES 11 SP3 for SAP.
ABAP 7.4 and HANA on the Same virtual Machine
During the Installation of SUSE in the software selection screen, we found the options as
- SAP Netweaver Server Base
- SAP HANA Server Base
We would like to know, whether we have to select these options for the SUSE Installation or only
SAP Application Server Base would be enough.
Thanks,
Regards
Ahmed Mohammed

Hi,
Tuxedo 10.0 extended support ends in September of this year. If you are making the move from 32 bit versions to 64 bit versions you should definitely move to newer versions of Tuxedo. Tuxedo 12.1.1 has been out nearly three years at this point and is certified for Suse Linux 11 64 bit. Is there a reason you are staying on such an old version of Tuxedo while upgrading the OS?
Regards,
Todd Little
Oracle Tuxedo Chief Architect
PS For more information about support lifetimes, see: http://www.oracle.com/us/support/library/lifetime-support-middleware-069163.pdf
Also if you would like to go all the way to Tuxedo 12.1.3, please ask for a certification in My Oracle Support.

Function Point Analysis for SAP BW Projects

Hello All,
Have been assigned a task to come up with Function Point
analysis for SAP BW projects.
Any help will be appreciated.
Thanks,
Mainak

Hi Mainak,
Function Point Analysis is independent of technology, methodology or platform, so there is no function point analysis specific for sap bw, rather you should familiarize with the fundamentals of FPA.
And as you might know, FAP is used to determine whether a given a tool, an environment or a language is more productive when compared to others.
I can send you good links if you can give me your email-id.
Hope this helps...
Thanks,
Raj

Is Desktop with AMD Processor suitable for SAP ECC6.0?

Similar Messages

Maybe you are looking for