Is digital Persona Identity protection suite (finger print verification) for logins compaitable with Firefox 10?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/919319]]</blockquote>
Digital Persona Identity Protection suite >for easy logins through finger print reading>this application was working for me till Firefox 3.6 ,but not for versions above that So I am still continuing with the Old version without an Update.Does Firefox 10 support this application

*http://www.digitalpersona.com/support/overview/
*http://support.authentec.com/Forum.aspx

Similar Messages

  • Care button and finger print reader for 3000 N200 not working

    I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
    Kinldly help.

    Hi @Sean-Ireland
    Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My finger print reader for dv6-3025dx is not working: can i fix it by redownloading the software?

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

  • Finger print software for hp 840 g1

    i have just installed new windows 7 ultimate 64 bit on my hp elite book 840 g1. finger print sensor is already installed and in control manager it shows that driver is installed and its working properly. now i install hp protect tools security manager but it does not show me to set finger prints and nor it show any finger print sensor installed on laptop.kindly tell me which software is to install on laptop and from where i can get it in order to use finger print sensor to login windows.thanks

    Please reply with current Operating System of your PC.  Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

  • Is Mac's firewall sufficient or is will an additional firewall help?  What security suite do you recomend for MacBook Air with Maverick?

    Is Mac's firewall sufficient or is will an additional firewall help?  What security suite do you recomend for MacBook Air with Maverick?

    Third party security software is better at causing problems then it is at solving them.
    I recommend against them.
    If you felt it is necessary then configure the firwall software included with OS X.
    Allan

  • Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?

    Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?

    Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • HT203164 I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/

    I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well,  which I used before for this exact thing w/no problem.

    Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok. 
    Go to this link and HP shows you how.
    support.hp.com/us-en/document/c01643079
    Lucky for me it worked!

  • My finger print scanner for logging on to web pages no longer works in firefox 4

    My laptop has a finger print scanner that manages passwords. You scan your finger to log on to various pages or accounts instead of typing in the log in information. It worked flawlessly in the older version of Firefox, but since upgrading to Firefox 4 it no longer works. I checked and it still works with Windows.

    Is the a Digital Persona fingerprint scanner, also used in teh HP SimplePass Identity Manager? If do the company that make the bioscanner have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388

  • Finger print reader will not work with password manager

    i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??

    Hi,
    I have the same problem, help me please.
    I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that  the device is not installed.
    (Sorry for my english.) 

  • Firefox does not recognize my finger print reader for passwords

    My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work

    I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

  • Finger print driver for Windows 7 64 bit

    Will be create the drivers for finger print?

    actually, I do not believe that Toshiba will not be releasing a fingerprint reader driver because Windows 7 has one built in. Today, I noticed that Toshiba US sent around this update as follows:
    The items listed below have been added or updated on the Toshiba Support Website in the past week for the models to which you subscribe:
    Downloads: Truesuite Access Manager uninstaller(see the link below)
    Model: Portege M700-S7008X
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?soid=2461585
    The UnInstaller actually removes the Authentec drivers so they will not interfere with the installation of the driver for the Windows 7 fingerprint driver software.

  • HP Smart Web Printing 4.6 is incompatible with Firefox 4.0.1.

     Are there any updates to HP Smart Web Printing?

    Hi,
    There's nothing compatible with Firefox 4.0.1 yet.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My Epson printer stopped working with Firefox today. It does test pages, will work on Notebook, and will work with IE. Up until today it worked with Firefox. Why can't I print anything from the internet with Firefox?

    Up until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer would not work. I went to troubleshoot page and it printed a test page. I uninstalled my printer and then re-installed it. Still would not work from an internet page. I did a system restore. Still didn't work. Called Epson. They say it's a Firefox problem because it works on Notebook and test pages. I installed IE and the printer works. What happened and how can I get it back working with Firefox?

    I have the same problem, I cannot print PayPal shipping label off of Firefox. I did the about.config entry and have seen that the print.print_printer does not exist at all in the list of entries. I use Vista 32. I use an Epson 545 wirelessly.
    Can anyone help?

  • Can't print from some sites visited with Firefox, but can print from same sites visited from IE.

    From IE I can print emails from my Google email but not from Firefox. For some reason Firefox keeps changing my print settings and that prevents printing unless I manually change them back. Also I have had trouble printing from dailysudoku.com. I am running Windows 7 Home Edition on an HP laptop. I tried uninstalling Firefox and then reinstalling, but that didn't solve the problem.

    No. This didn't work. And when I went to about:config I received a warning message that I might void the warranty if went there. And I should go there only if I knew what I was doing. If followed the instructions very carefully and reset the print settings as you suggested. I also got the following message:
    Some users may need to reset all the print.printer preferences for a particular printer, if resetting this one master preference doesn't solve the problem.
    Will I need to try to reset some of the other print.printer preferences besides print.printer_print? I'm a little nervous about doing something that could void my warranty if I don't know exactly what I'm doing.

  • Print smartforms for service order with printer, not a spool in CRM WebUI

    Dear Experts!
    We have a long list of different print forms for a service order. We would love to have a list of these forms appearing when clicking on "Print" button to choose from.
    We have made appropriate settings in SPRO (CRM -> Basic Functions -> Actions -> Actions in Transaction -> Change Actions and Conditions -> Define Action Profiles and Actions & Define Conditions). Option "Print Immediately" is set, and the Output Device is set to local printer. So now we have the following results:
    - When clicking "Print Preview", a window appears where one of the possible forms may be selected to be shown as PDF.
    - When clicking "Print", one of the forms is being moved to spool. So, you may only enter the spool in GUI and send the document to printer.
    There is only one help topic about printing, that says:
    Prerequisites
    Actions are displayed on the Print pushbutton if the following criteria are met:
    -The print action is set as relevant for the toolbar
    - A print smart form is defined as the processing type
    - The action is set to Execute immediately
    - The action is inactive, that is, it is set to be executed manually
    Please, give us a hint on how to make customizing to send document right to the printer.

    Hi Alex,
    This Business Add-In (PRINTER_DETERM_PPF) is used in the Actions (CRM-BF-ACI) component. It enables you to determine a printer more flexibly than the standard Customizing activity allows you to. For example, if you want to print an e-mail confirmation from a local printer in your office, and not from the usual printer for your entire department, you can use this add-in to do so.
    Get back to me for a more info.
    Hope this helps.
    Cheers, Satish

Maybe you are looking for

  • HT5622 My apple I'd has been disabled.  How do I get it working again.

    My apple id has been disables.  How do I get it working again?

  • Test in AL 11 folder

    Hi I am doing a File to File test scenario. I do not have a file access. Can I place the target file in my desktop? How do I do that ? Or can I creata a folder in XI in AL 11 , place there and check the file It would be helpful before I actually plac

  • Publsihing iweb file to .mac

    I am trying to publish an iweb podcast file to my .mac account. However I keep getting error message after I click on file> Publish to .Mac within iweb Am I doing anything wrong? I have setup a .mac account, but nothing else. Can anyone help.

  • Using CSS With id=form1:txtbox1

    Author: Mike12779 Sep 7, 2004 5:27 PM I am having a problem using CSS with the id's that JSF creates for the components on my page. After specifying an id="txtbox1", the rendering of the page changes my id to "form1:txtbox1". This is giving me proble

  • System Refresh activity

    Does any body have a clear explanation for the system refresh activity. and is System copy and  refresh one and the same if some one has steps please send them to me thank u