Is driver for OSX 10.10 Yosemite available Laserjet CP1525nw?

I am getting ready to update my computers to OSX 10.10 but noticed that the latest available driver is for OSX 10.9 Mavericks.  Will the Mavericks driver work with Yosemite?  If not, will a new driver be released, and if so, how soon?
Thanks--

@rain007 
Great question regarding the different naming conviention between the HP Color Pro Laserjet cp1525nw and the HP Color Laserjet cp1525nw. These are actual the same printer so please don't get confused by the word "Pro" being added. 
You will also notice that you now get your Apple drivers via the Apple Software Update or ASU. Here are a couple of reference documents that should be of help.
Installing the Full Feature HP Print Driver in OS X v10.10 Yosemite with a USB Cable 
Installing the OS X v10.10 Yosemite HP Print Driver from Apple Software Update
If the driver is not located in the ASU, then the dmg file is located on the printer page. It does say the it is compatible with both 10.9 and 10.10. 
cp1525 dmg file
Let me know if you have any other questions.
AuntieEm
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

  • If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

    If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

    If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
    If you want to run Mac and Windows at the same time, you could do what I did:
    Get Parallels
    Install Windows as VM on top of Parallels
    Install Office in Windows
    Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
    It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

  • Need Geforce 9400m driver for OSX lion

    Please help, I can't find the driver for the geforce 9400m for OSX lion on the Nvidia's website. There's only the drivers for OSX leopard and snow leopard.

    Try turning off bluetooth. I noticed after doing some research and using xbench to test my system, GUI resources almost tripled after turning off bluetooth. I know thats odd but of all the fixes and ideas I have found online, this seems to be the only one which increased gaming performance. Be nice if we could download updated drivers from nvidia though. It will only be a matter of time before we have the ability to get lion drivers through nvidias site. Snow leopard is already there so im sure lion is to follow soon. If this doesnt help, go get yourself an optimization tool like onyx or CleanMyMac. This helped me out a little bit. Not much but enough to get another few FPS. Hope this helps.

  • HP laserjet M2727 driver for OSX 10.7.4 crashed application

    I recently updated hp laserjet driver for M2727 nf printer. When I hit the print command, it crashes the application and does not print. Any suggestions to fix it?

    What application are you referring to?

  • Looking for HP Laserjet driver for OSx.10.8.2

    I need a printer driver for an HP Laserjet 1200 or HP Laserjet 1300. HP says it's Apple's responsibility and Apple says it's HP's responsibility.
    Any help appreciated. Thanks

    Hi,
    The HP Laserjet 1200 do compatible with Mountain Lion:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01664444 #N2471
    Try removing any instalnce of the drivers and then check for Software Update:
    Go to Computer > Macintosh-HD > Library > Printers and move the HP folder to the trash.
    Browse into PPDs > Contents > Resources. search for 1200 within the folder. move the drivers to the trash and restart your Mac.
    Next go to Print & Scan and reset the printing System:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
    Finally try connecting the printer again and check for any difference.
    Shlomi

  • No TEAC cd/dvd driver for Satellite A105 2101 not available???

    I have looked everywhere for a driver to replace my Missing or Corrupted (code 39) TEAC DW-22-224E-C driver for my Satellite A105 series!  I uninstalled and reinstalled the driver, and I have the latest update.  It is still not working - i get a code 39.  I can put a cd in my internal drive, hear it spin, see the yellow light go on, then the light goes off and it stops spinning.  Any suggestions????   If I take it down to a total recovery and it still doesn't fix the driver, I lose all my software application that I have installed - if it deletes it - because I won't be able to use the cd/dvd drive to reinstall anything.  I NEED HELP PLEASE!  Thank you for anything you can do to get me out of this jam!
    Tia

    Tia wrote:
    I have looked everywhere for a driver to replace my Missing or Corrupted (code 39) TEAC DW-22-224E-C driver for my Satellite A105 series!  I uninstalled and reinstalled the driver, and I have the latest update.  It is still not working - i get a code 39.  I can put a cd in my internal drive, hear it spin, see the yellow light go on, then the light goes off and it stops spinning.  Any suggestions????   If I take it down to a total recovery and it still doesn't fix the driver, I lose all my software application that I have installed - if it deletes it - because I won't be able to use the cd/dvd drive to reinstall anything.  I NEED HELP PLEASE!  Thank you for anything you can do to get me out of this jam!
    Tia
    Follow the steps in this Toshiba support bulletin:
    CD / DVD drive missing from 'My Computer' (Windows Explorer)
    http://kb.toshiba.com/98080671

  • External hard drive for maintaining Mavericks after Yosemite upgrade

    Hey guys,
    Here's my situation. I have some software that won't be compatible with Yosemite in the fall but I want to be able to continue to use it as I do with Mavericks. Can I get an external hard drive like G aluminum 1T model and run OSX 10.9.4 and this software on it and still upgrade my mid 2010 macbook pro to Yosemite?
    Thanks,
    Mike

    After you get the external drive, attach and open Disk Utility.  Choose the new drive from the left sidebar, then in the main panel choose Partition and set the number of partitions you want...you can use the default of 1 if that is what you want.  Then Name the drive so you can spot it on the desktop.  Format should be Mac OS X Extended (Journaled), and partition table GUID.  Apply and confirm you want to erase the drive.  Close Disk Utility.
    Now, you can use a program like Carbon Copy Cloner (now costs $40 but you can use if for free for 30-days) to make a bootable clone of your current drive on the external drive.  That way you have everything from the internal and you can boot your current Mac OS X if you want to or Yosemite after that comes out.
    You will then have options

  • External Drive for OSX and Windows

    Dear all,
    I read somwhere that it is possible to use an external HD which can be used as an intermediate for documents between a PowerMac and Windows 2000 computer.
    The article suggested that when using the Disk Utility program of Apple, the Ext. HD should be erased using the MS-Dos modus. This I did. After that it mentioned that by clicking on the Partion tab, under the "Option" button MS-DOS file structure should be selected.
    However my DU program says: "No Options Available".
    I'm still using OS 10.3.9 and I will upgrade when OS 10.5 becomes available.
    Question: Why is the "Options" button not available? If this is because of using 10.3.9 how can I bypass the option and make the Windows computer see the External HD as well?
    Thanks for your input,
    Hans.

    For now, while you need 10.4.6 to select GUID partition table, you can still setup a drive with FAT32 partitions. Format it on Windows perhaps.
    Disk Utility -> Partitions -> Options....
    GPL/GUID for Intel Macs
    APL for PowerPC
    Master Record Block for Windows
    With Intel Macs you can install and run Windows XP SP2, Vista, XP Pro.
    Hans, right now is probably the best time to update the OS. Tiger 10.4.9 is as complete as possible probably and esp. for PPC Macs. I think it runs better than 10.3.9 did.
    While 10.5 will offer something different and new, the best time to upgrade is not when it is released sometimes, but rather once it reaches 10.5.3+ (ie, a year from now or later). Play and test it but depend on it 100%? Usually there are needed changes to software and hardware to "catch up."
    Right now Tiger DVD 10.4.6 are available. Apple felt it worth putting out newer DVDs.

  • HP Color LaserJet CM1312nfi MFP driver for OSX 10.9.2

    I recently updated my operating system to OSX 10.9.2 and now I can't scan.  Scanning function in HP director is greyed out and my Apple scanning utilities do not detect a scanner installed.  Tried switching from network to PC connection to no avail.  When will HP have a new driver that updates full printer function compatibility with OSX 10.9.2?

    Hello maili911,
    Welcome to the HP Forums!
    I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
    Good luck.
    I worked on behalf of HP.

  • Sky Go Desktop v1 for OSX 10.6 - still available?

    Hi All. OSX 10.6.8 (the latest version my laptop can run). I recently had some laptop issues, so I am reinstalling some apps and things. I deleted Sky Go Desktop from my machine. Foolishly before checking to see if it was still available to download. However, I now cannot reinstall. The web page displays the message that Sky Go is already installed on this machine.
    It seems that after years of nothing beyond Snow Leopard being supported, my OS is no longer supported by Sky! So I am locked out. Is it possible to still download version 1 of the Sky Go app? It was working fine until a couple of days ago. I just need the app file again. Could someone provide it for me please? I don't mind about it being unsupported. It was working just fine for downloaded programs up until a few days ago before I had to reinstall things. 

    Those requirements are for the DVD version of it and not the Mac App Store version. Check sites such as Amazon or eBay for iWork 09 DVDs.
    (89987)

  • Installing new drive for OSX-How do I format and remove existing drive

    I'm going to replace the 320G drive that came in my Mac Pro with a 500G. I want to format and remove the 320G, then put OSX on the 500G. How would I go about this.

    Hi,
    Shut down computer, add the 500GB drive into one of the open hard drive slots, reboot, there might be a window that pops up indicating if you want to "intialize" the new drive. Click Intialize (If nothing comes up launch disk utility located in applications--> utilities--> disk utility).
    In the disk utility window, locate the new drive on the left side column. Click on the drive, and in the middle portion of the window there will be 5 tabs: First Aid, Erase, Partition, RAID, Restore. Click Partition.
    Under Volume Scheme, choose how many partitions you want. I your case you probably just want 1 partition, so choose 1 partition.
    Name the volume under volume information, choose Mac OS Extended (Journaled) for format.
    Looking at the buttons below press "Options". Your mac is intel make sure "GUID Partition Table" is clicked.
    Press Partition. Wait a couple seconds for it to partition. Once done, it will show up on the desktop. It's ready to go.
    Next step to decide is if you want to fresh install the OS onto this new 500GB drive OR simply clone over your 320GB. This is up to you. If you don't want to reinstall everything just use a cloning program such as "Superduper!" or "Carbon Copy Cloner".
    If you want to fresh install the OS, insert the OS disk that came with the mac pro. Restart. When restarting hold down the letter "c" on the keyboard to boot from disk. Follow the instructions, and choose "erase and install". If you are going to fresh install, BE SURE TO CHOOSE THE BLANK 500GB, NOT YOUR CURRENT 320GB. To fresh install, the choice is "Erase and Install" I think. Install and your 500GB drive should be ready to go, with a brand new OS installed.
    Whether you choose to clone over your system, or fresh install, if possible always run "Disk Warrior" or "Tech Tools" maintenance disks if you have them either after the OS install or after installing all your applications.
    Have fun!
    noice_T

  • How to use the same external hard drive for OSX and XP

    Hello to all. First off, thanks for all of the helpful comments that have been posted in the discussion board, they have helped me a lot with my problems and curiosities. My question has been touched on in the past, but nothing concrete so I figured I'd ask a bit more specifically.
    I recently loaded Windows XP (FAT32)onto my MacBook. Everything is running smoothly, but I was just curious how I could format my external HD so that both operating systems can read it, i.e. I only have 20 GB's partitioned for Windows XP, and i'll be using it to download music and movies. I would like to be able to play these straight from my external rather than use up the disc space. Let me know if anybody can help! Thanks.

    Unfortunately, Disk Utility doesn't just move everything around. It has to erase everything, and then resize. I find it a little odd, seeing as other disk utilities can resize everything just fine. Anyway, yes, you will have to erase your drive to reformat it as FAT32. What I usually do is try to copy everything from the drive to free space in the internal drives. I haven't had too much data on my drive yet, so I've been lucky so far. I don't know if you have enough free space on whatever drives you have, but that's probably the best way to do it.
    1) Transfer everything over to a folder on the internal drive
    2) Use Disk Utility to reformat the drive as FAT32
    3) Transfer everything back to the external drive
    2.0GHz MacBook 1st Gen   Mac OS X (10.4.8)   2GB RAM

  • I am looking for HP Laserjet CM2320 MFP driver for OSX 10.8.1

    I have a LaserColor printer with all in one it is namely HP Color Laserjet CM2320nf MFP, once I upgraded my computer to the mountain lion OSX 10.8.1 I cannot scan any document, how can I go about this, any one help is appreciated. Thanks

    Hi awwadalhabli,
    There seems to be of documentation for the specific model compatibility with Mountain lion, the support currently provided include print & fax capabilities but not scanning support.
    Did you upgraded your operating system from 10.6 or 10.7?
    You should have the HP Laserjet MFP folder, what happens when you try using the HP Scan application?
    Please let me know the answers to my question in order to better understand how we may bypass this limitation
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Canoscan N1220U driver for OSX Lion?

    does anybody know where to find a scanner driver suitable for an old Canon Canoscan N1220U scanner?

    You may want to see if Vuescan supports this device. You can find it at http://www.hamrick.com/
    Good luck.

  • HP scanjet 7400c driver for OSX Lion?

    My scanner  will not work with Lion.  I expect that HP will not provide a new driver.  Will Apple do so?  Should I just wait for new driver to be published by either HP or Apple?  Or should I just buy a new scanner?  Suggestions?

    should I just buy a new scanner 
    because my scanner 3570c is not listed.
    In the HP Scanjet Scanners - HP Scanjetproducts supported in OS X 10.7 (Lion)
    If your product is not listed here, youmight consider an upgrade to a newer HP scanner that will work with the newMacintosh operating system. For more information, go to the HP Shopping website(http://www.shopping.hp.com).
    Upgrade the HP Scanjet to OS X 10.7 (Lion)
      NOTE:   
      Please  DO NOT install software on your Mac from any HP CD that might have come with  your HP Scanjet device. This software is not intended for use on Lion.  

Maybe you are looking for