Is EAP-LEAP plug-in supported in Nokia X6 version ...

For those who has upgraded Nokia X6 16GB to V20.0.005 NAM version, does it still have the EAP-LEAP plug-in available. And, does LEAP still work?
LEAP is a little bit out of date and not included in WPA2. I see the reasoning to drop its support. But I just need it.
The V20.0.005version has some features I would really like but LEAP is a must for me. Given that downgrade is not formally supported, a little bit nervous to try it. Some seems to encounter problem as reported in this post.
Share your experience please. Thanks very much!

Answer my own question. Nokia support said LEAP is still available. It is true. I upgraded to V 20.2.005 and it still have EAP-LEAP and working fine.

Similar Messages

N95-3 - really need wifi EAP-LEAP

hello all,
i have a nokia n95-3 and need to configure a wlan conecction using 802.1x EAP (LEAP) security.
i have created a new wlan and selected EAP but i can not see any EAP-LEAP plugin to configure.
type:    rm-160
model:    n95-3
current firmware: 20.2.011 (13-05-08)
thank you very much for any help.
jose
Message Edited by guindasoft on 29-Sep-2009 11:51 AM
Salud2, Guind@Soft
.: Haz lo que puedas, con lo que tengas, estés donde estés :.

guindasoft wrote:
hello all,
i have a nokia n95-3 and need to configure a wlan conecction using 802.1x EAP (LEAP) security.
i have created a new wlan and selected EAP but i can not see any EAP-LEAP plugin to configure.
type:    rm-160
model:    n95-3
current firmware: 20.2.011 (13-05-08)
thank you very much for any help.
jose
Message Edited by guindasoft on 29-Sep-2009 11:51 AM
I think that N95 may actually be one of the rare WLAN enabled Nokia phone models that doesn't support LEAP authentication method at all. It seems that you are out of luck connecting to that particular WLAN network unless authentication server on the network supports also some other EAP authentication methods e.g. PEAP, TTLS or TLS that are supported by the N95.

Eap LEAP wifi standard missing in N95 ?

Hi there,
i need eap leap security standard in order to connect to office wi fi , when i started to set up the connection i cant seam to find it under EAP security settings ?
Now i had no problem settin this up on e60 e61 or even older s8 9300i ...
Now am i missing something or this is not on the N95 pls be so kind and check urse lookin forward for ure reply ...
PS ... have the latest fw my phone is sim free no branding there !
regards laz

guindasoft wrote:
hello all,
i have a nokia n95-3 and need to configure a wlan conecction using 802.1x EAP (LEAP) security.
i have created a new wlan and selected EAP but i can not see any EAP-LEAP plugin to configure.
type: rm-160
model: n95-3
current firmware: 20.2.011 (13-05-08)
thank you very much for any help.
jose
Message Edited by guindasoft on 29-Sep-2009 11:51 AM
I think that N95 may actually be one of the rare WLAN enabled Nokia phone models that doesn't support LEAP authentication method at all. It seems that you are out of luck connecting to that particular WLAN network unless authentication server on the network supports also some other EAP authentication methods e.g. PEAP, TTLS or TLS that are supported by the N95.

E90 eap-leap connectivity, as usual not working...

Sorry folks, here we go again.... I have already made some search in the forum about the topic and also tried them accordingly to no avail. First try, general error, second try it will crash (screen will blank out and restart, what a graceful exit!!!) Well I cant count how many restart I made and Im a little bit tired, maybe I need some help. =)
Anyway here's my settings : (this setting is working perfectly on windows XP, so I assume its a handphone or handphone config issue)
Model : E90
Firmware : 07.24.0.3
Name : CompanyRoam
Data Bearer : Wireless LAN
WLan Net name : CompanyRoam
Network Status : Public
WLan Net. Mode : Infrastructure
WLan Security Mode : 802.1x
Wlan Security Settings :
WPA/WPA2 : EAP
EAP plug-in settings : EAP-LEAP (Disabled everything but this)
Username : *username* (also tried *username*\*domain*)
Prompt Password : No (tried yes then no, as said in some forum)
Password : myDomainPassword
Others : ip address using dhcp

After more research on Eap-Leap connectivity, I found someone that can connect to our corporate wifi but using a Nokia E60.
My settings were the same as his E60, i even ask him to place his username and password to my Nokia E90 and still it crashes. So finally conluded this is a firmware problem.
It is so embarrasing the same NOKIA manufacturer, even the same E-SERIES and does not work. Hopefully by next firrware this should work.
So for E90 users out there, no eap-leap connectivity as of my current firmware. I will continue to update this thread as new firmware arrives.

Nokia 6700 supported by Nokia Multimedia Transfer

Hello All,
Please note that Nokia 6700 device is supported by nokia multimedia Transfer for mac
http://europe.nokia.com/support/download-software/nokia-multimedia-transfer/download
Download Nokia Multimedia Transfer
Connect the device and select PC suite mode in the device
Then click the icon on the menu bar, and go to tools and settings
Then select check for updates now with the device connected.
The device profile will be downloaded.
Restart Nokia Multimediate Transfer and lauch again
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

Just a note for people who are as non observant as I was and who might find this useful...
My Nokia 6700 slide wouldn't sync, no matter what I did and even when I installed:
http://www.novamedia.de/en/mac-isync-plugins.html
or wrote my own plugins...
For some reason, by default, my Nokia came with Sync settings disabled on the phone.
So to remedy this, go to:
Settings > Connectivity > Sync >
And select all the things you want to sync before you run iSync. I missed this in the manual, I spent about 8 hours trying to fix it and all to no avail until I found this simple ommission.
Also, if you need to uninstall the nokia isync plugin, just go to:
/Library/PhonePlugins
and delete the relevant files.
Hope this is useful.

What is Plug-in, SUpport Package, Add in and how R3 and BW are interdep

Hello Every One,
Can some one explain me in simple words about the terms, Plug-ins, SUpport Packs, Service Packs, Add-in's, SAP Notes and how R3 and BW are interdependant in the above mentioned terms? Can anyone give a simple example?
regards,
kishore

Hi,
Plug-ins:[/b]
Additional program which enhances the functionality of an existing program. Additional functions which may not be needed or are mutually exclusive are often implemented as plug-ins.
For example ICMAN contains various plug-ins for the various network protocols which it supports (HTTP, SMTP, FTP,...).
The interface between mySAP.com components (for example, SAP APO, SAP BBP, SAP BW, SAP CRM) and one or more SAP R/3 systems.
The SAP R/3 Plug-In unites the plug-ins APO-CIF, CRM-R3A, BW-BCT and B2B-PRO-PI. This simplifies maintenance significantly and guarantees compatibility between the individual mySAP.com components. With SAP R/3 Plug-In, you can use several mySAP.com components simultaneously in a single system. SAP R/3 Plug-In supplies the mySAP.com component transaction data and master data in real time.
Technically, there are two versions of each release of the SAP R/3 Plug-In, a PI version and a PI-A version.
The technical names of the software components are PI and PI_A
SUpport Packs
A set of corrections for serious software errors in the SAP system.
Support Packages are compiled periodically and made available in the SAP Service Marketplace.
Service Packs
A grouping of different services for a quotation.
A service package can be agreed between a service provider and a customer within a service contract or as part of a complex service plan, which can also be additionally agreed in a service contract.
EXAMPLE
A "Winter Car Check" service package containing the following services is agreed in a contract:
Cooling water check
Brake fluid check
Battery inspection
Light inspection
Add-in's
add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
SAP Notes
Documentaion Prepared by SAP for publishing clarity in case of corrections or changes happening to the SAP Software.
R3 and BW are interdependant
Then BW takes the Data from R/3 : so there has to be Support Pluggins which are mapped to the BW server.So the SAP Supported R/3 Versions should be used.
Eg: SAP Stoped the Support for r/3 4.0 series
regards
Happy Tony

Does Cisco MOC RCC Plug-in support Windows 7 64bits?

Hi,
I tried to install the Cisco_MOC_RCC_Plug-in.msi on a Windows 7, 64 bits. (CUPS is 7.0.8, the plug-in is coming from the CUPS server)
I use the command line, I receive the installation windows, do a complete install. But, after I don't see the Cisco Phone Selection tab in the MOC.
The same steps works properly on Windows XP, 32 bits.
I verified the Cisco document but they never mention the OS supported by the RCC plug-in.
Does Cisco MOC RCC Plug-in support Windows 7 64bits?
Thanks

Hi,
Actually, it is mentioned on the CUPS server itself on the page of the plug-in download (CUPS Server admininstration > Applications > Plugins > ..).
Here is a copy/paste from CUPS 8.0.4.x -
"The Cisco Unified Presence Microsoft Office Communicator (MOC) 2007 Remote Call Control plugin allows MOC users to select which phone line they wish MOC to control. When installed, the plugin will expose a CUP web page within the MOC application where users can change their current MOC phone line of control. This version is supported on Microsoft Windows XP/Vista"
Although it doesn't mention windows 7 (32/64) (meaning dev team haven't tested it to certify), please feel free to give it a try.
Thanks

Midi support on Nokia 5000

Hi all!
I have a collection of midi files from which I like to pick my ringtones. However many of these files will not play (apparently mostly the ones larger than 20KB in filesize). Can anybody tell me what restrictions apply when playing Midi on the Nokia 5000? Or is there a way to make these files playable?
Cheers,
Edmund

Hi,
I think that there is no Messaging support for Nokia 6155. (Maybe you should get contact to Nokia and ask them to add it..)

Image size supported by Nokia 6630

Can anybody please let me know the Image Sizes supported by Nokia 6630

hello
you can know that by opening your 6630 camera setting
but any way its take 2 differnt size
640*480
1280*960
best regard

How soon can N78 support in Nokia Multimedia Trans...

I'm a Nokia's user who lived in China...
I used the Nokia N72 to connection with a mac so it can be work (using a Nokia Muultimedia Transfer)
I bought a N78 yesterday.It's so cool in the FP2 OS.but it can't be work on Mac(Nokia Multimedia Transfer).I changed the N73 to N78 from iSync,it can be work.
How soon can Nokia Multimedia Transfer support the nokia N78
Solved!
Go to Solution.

Hi,
I think Nokia has updated NMT. If you are running NMT 1.3, you can check for updates from within the application which will bring the latest version of the application down but Still NMT 1.3 Beta.
But the web site has NOT been updated yet(Still no support for N78).
Check now...........
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Oracle Lite Support for Nokia E-Series (Symbian OS 9.2)

Are there any plans to support the Nokia Enterprise Series of handsets running the Symbian OS 9.2 in the near future (i.e. E60/E61/E70).
Thanks.

Ciao
all Nokia 3rd edition have Flash Lite 1.1 embedded so they
currently do not support FL2.
Nokia will release FL2 on the 3rd edition feature pack
1models, probably next year.
Alessandro

Cannot connect Access Point (WPA2 EAP Leap)

Dear Expert
We 've try to configure Client to connect to Access Point (WPA2 EAP Leap) but cannot connect and We've found LOG on Wireless Controller as below.
Please advise me that What I should to do.
*Sep 29 14:45:43.102: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:535 Disconnecting mobile 00:14:a5:d2:81:25 due to switch of WLANs from 2 to 3
*Sep 29 14:45:41.085: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2234 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:14:a5:d2:81:25, SSID:airport-sup,AP: 00:26:cb:a9:7d:30.
Best Regards
Peera

Hi Peera,
the first message is because the user switched quickly between SSIDs. This is a behavior that WLC blocks by default.
Change the option "Fast SSID change" to enabled if you want to stop that blocking.
The second message simply means that the client was not configured for wpa/wpa2 ... This is something I can hardly comment on since I can't see the client configuration

EAP-LEAP Module for Windows Vista & 7?

I’m trying to understand the 802.1X clients/modules Cisco offers. I found the Cisco Secure Services Client and the EAP-FAST Module for Win Vista/7. But where do I download or learn more about the EAP-LEAP Module for Win Vista/7?

Well you can try this:
http://blogs.msdn.com/b/eapteam/archive/2008/10/17/how-do-i-install-cisco-eap-fast-on-my-computer.aspx
http://blogs.msdn.com/b/eapteam/archive/2008/10/17/how-can-i-download-the-ecp-methods-from-the-web.aspx
however I dont know if it is needed, but on my computer I already have LEAP EAPFAST and cisco PEAP
From intel, EAP-SIM, EAP-TTLS and EAP-AKA
Im running Windows 7 ultimate
I can see these options on WZC when I am setting up the security options on the profile.
I recently downloaded the wireless drivers for my Intel 3945ABG wireless card. So I cant really explain if there were since the begining or thru a windows update or maybe due to the manually updated Intel drivers...
Hope it helps you

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

Is EAP-LEAP plug-in supported in Nokia X6 version ...

Similar Messages

Maybe you are looking for