Is EMET Config XML the same as the GPO of EMET?
Hi,
I deployed EMET to our environment and used GPO to deploy settings. I can see that the GPO are applied and is protecting the computer by going to the registry of the computer. Ex. regedit --> HKLM --> Software --> Policies --> Microsoft
-> EMET.
Then I read on the link below that I have to import the XML, but the XML looks quite similar as the what was set on the GPO. My question is, do I still need to import the XML file if I am already implementing something via GPO?
If that is the case, then if I implement the XML and if something went wrong, I could not globally manage unlike the GPO.
http://blogs.technet.com/b/configmgrteam/archive/2012/05/15/deploying-and-configuring-the-enhanced-mitigation-experience-toolkit.aspx
On the other hand, what I noticed though is with the GPO enabled, I don't see a list of programs being protected under "configure apps". Instead I see what are being protected by going here regedit --> HKLM --> Software --> Policies -->
Microsoft -> EMET.
Am I configuring it correctly or do I need to do both?
Starting with EMET 5.0, EMET installs a service which imports group policy.
http://blogs.technet.com/b/srd/archive/2014/07/31/announcing-emet-v5.aspx - "We have added a new service, called EMET Service, which is taking in charge many duties that EMET Agent used to do in previous versions. The EMET Service, among other
things, takes care of evaluating the Certificate Trust rules, appropriately dispatching EMET Agents in every user’s instance, and automatically applying Group Policy settings pushed through the network. Also, a service offers more resiliency and better ability
to being monitored."
EMET does not currently have the ability to show the group policy application settings in the GUI. You can use the command line to see group policy settings however: emet_conf --list. Microsoft has indicated they are planning on adding that feature
to the GUI in future versions:
https://connect.microsoft.com/emet/Feedback/Details/905794.
You do not need to apply both the group policy and the local xml settings, just one or the other. You can also verify that the group policy settings are applied by looking in the GUI at the list of running applications and noting the green check mark
circle next to the ones that are configured for EMET.
Similar Messages
-
Hi ,
We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
Thanks
DevHi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
In my opinion the better way is the following:
starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
After that:
Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
Execute baseline index for both IOC (one by one)
Execute baseline for IOC 1
Execute baseline for IOC 2.
Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
Regards -
Revision: 3037
Author: [email protected]
Date: 2008-08-29 06:54:15 -0700 (Fri, 29 Aug 2008)
Log Message:
Update flex-config.xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path. This will allow the correct playerglobal.swc to be located when the target player version is set in the flex-config.xml or passed to mxmlc or compc.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/resources/config/flex-config.xmlUnfortunately I don't have the
"org.eclipse.swt.win32.win32.x86_3.1.2.jar" file. On my computer
the folder is not set up the same way (C:\Program Files\Adobe\Flex
Builder 2\plugins) instead it is set up as (C:\Program
Files\Adobe\Flex Builder 2\metadata\plugins) but I've looked in
everything and that file just isn't in there. I've re downloaded it
twice. Still not there. Is there anything else i can do. -
Reply with the same address the message was sent to
Hi guys,
Sorry in advance for my bad english.
I am using a Gmail account which fetching multiple mail from multiple e-mail account.
On web-app desktop Gmail I set up the option "Reply with the same address the message was sent to".
Nevermind I know that has no impact of the behaviour of built-in mail app on iPhone.
Please would you know how to reply as default setting, directly from the e-mail account which receive first my e-mail not by using the field selector "From :" (I would like this field select automatically the right e-mail account).
For information I set up the other smtp server which I would like to use (Config> Mail, Contacts, Calendars > XXX (account) > Account > (Outgoing Mail Server) SMTP > The other SMTP Servers are all on "On").
Many thanks in advance for your helpful answers.
J.N. P.Dear Johnnnyone,
Thank you for your advise. I just deleted and re-installed it but again I still experiencing the same challenge.
Let me show you what I mean on below print screen from my PC....
What I want from my Gmail at Black berry is to have the same option as appeared on my PC. In my PC I can send as other user using Gmail.
Deeply appreciate to have your advise all. Thank you very much once again -
Question is here above but more details here under
I use Entourage as Mail sender. I don't use the adress book.
When I tip a wrong adress and make the correction, the old one stays in the memory of my computer ( apple I Mac ).
When I wish to send a new message to the same adress, the wrong one appears in the same time , and some time I don't remember wich is the good one .
To avoid that problem, how can I delete the wrong adress for future sending of mails.Solution, use Apple Mail
I can highly recommend migrating to the Address Book. You won't have the typo'ed history in your email.
Here's the KB on how to clear the list
http://support.microsoft.com/kb/823667 -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future. -
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
Is the new Ipod Touch 8gb the same as the 4th generation?
Hi, I'm looking into getting the Ipod Touch 5th generation 8gb. I have the 3rd generation 8gb and I found that this was pretty much the same as the 2nd generation, so when I tried to update to the new iOS at the time, it only had limited features, while the 32GB+ versions had the full set. It even comes up that I have a 2nd generation Ipod touch registered to my account, whereas I paid for a 3rd generation model -.-
I dont really need 32GB so I was wondering whether I'd have the same problem with the 8GB 5th generation when a new iOS update comes out. Thanks- You said: " I have the 3rd generation 8gb ". You have a 2G iPod Apple only made 32 and 64 GB 3G iPods. When Apple introduced the 3G iPods, the 8 GB 2G iPod but with updated iOS was continued to be sold.
- There is not 5G iPod touchyet. The ones introduced in October 2011 are sill 4G iPod but with a less expenisve price and also available in white. There is not confusion like there was when the 3G iPod was introduced. -
A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??
ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying. -
How can I get string that is the same as the name show on the Jtable UI
I need to implement the jtable keystore searching feature.
but I face one problem. because in my application, there are many different objects for the data vector in the model of different tables.
in order to using the same class to do the search for all of the tables. I need to get the same string for the items showing in the table instead using
table.getValueAt(r, c) to get a object. threrefore I can compare two strings.
any advice is appreciated.
Jack Tiebut the problem is Can we make sure the string we get
from table.getValueAt(r,c).toString
is the same as the string show on the JTable UI.That probably depends on the TableCellRenderer that is asked to render that particular column. I would assume that the default behavior is what you want, i.e. that the renderer uses toString() on the Object. -
How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage
Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
thanx in advance for your response!Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
The external channel instrument strip will look like this.
Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
In the channel strip inspector you can send patch changes to the SV-1.
Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps. -
I went on a trip and when I came back almost all my ipad apps were gone(I suspect my dad). When I went to go look at my account it was as the same as the ipad, it had none of my other games on there. How do I get my account back to how it was
I kind of ran into the same issue when I checked my purchased apps on my iPad in the iTunes store. A bunch were not there. I then looked at iTunes on my computer and again, a bunch were missing. I realized I had not synched in quite a while. Once I synched everything was ok. As the poster above said, iTunes knows you have already purchased them so you can redownload for free. However, be aware that when you do red own load you will be asked to pay again, just say ok and the next popup will say that you have already purchased the app.
Lesson I learned - synch more often. Boy, I can't wait for IOS5...... -
I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?
No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.
Maybe you are looking for
-
Quicktime Movie compression question
This is a G5 using 10.5.8 and Final Cut Pro 5.1.4. I'd like to submit a how-to video to a contest, and the maximum allowable size is 500 MB. My movie is presently three times that size. Is there any way I can compress a QT movie to a smaller size wit
-
Hi I'm working with a few .flv movie clips in my timeline based flash file. I've imported and embedded the files into movieclip symbols. My file is now sluggish and close to 10mgb. What's the best way to optimize the videos so my .fla and final .swf
-
Authentication failed!!!!help!help!help!!
I have same error: I am setting the smtp authentication in OCSR2 to true, after that, when ever I sent mail thru the server, it need the smtp authentication. I thought I had been successfully configure the server. But later on, when I trying to send
-
Iphone turns off after a few mn of utilization with the battery full
My iphone 3GS turns off after the battery is fully regenerated. I can only use it a few minutes before it turns off. I have to plug it again to turn it on, and the indicator of charge is around 98 %. The problem does not come from the battery. Has an
-
Does using Group Policy Preferences to deploy printers require the print driver to be pre-installed?
I'm trying to prepare our school system for Windows 7 (we currently use XP). I would like to use the new Group Policy Preferences method of deploying printers. I pushed out the XP client side extensions through WSUS. In my test environment, I adde