Is encore included in premeir pro

is encore included in premeir pro

More info here with an screenshot:
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

Similar Messages

  • Is Encore included in he Adobe Premiere Pro CC full package?

    Hi...I have downloaded a trial version of Adobe Premiere Pro CC and considering getting the full package of all apps. I don't have previous versions of Premiere Pro My main concern is regarding Adobe Encore. If I purchase the full Adobe CC package including Premiere will I get Encore and does Premiere Pro CC dynamic link to Encore?
    Thanks in advance as this will influence my purchase.
    kind regards
    Stuart

    Stu2882 wrote:
    Thanks Jeff really appreciate the response however if you do not have
    Premiere Pro CS6 what happens then? I won't be able to uninstall Premiere
    and leave Encore CS6 because I do not have it in the first place.
    Refer http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html for how to access Premiere Pro CS6 as a Creative Cloud member.

  • Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

    I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
    Hi David (00)... Thanks for your reply. I just wanted to let you know
    that I am going to post all of this correspondence on as many Creative
    forums that I can find in hopes of finding someone that help with this
    problem.
    I will advise you of the results
    Thanks again...Bill Allen
    ----- Original Message -----
    From: "Creative Americas Customer Support"
    To: "Bill Allen"
    Sent: Saturday, February , 2006 :39 AM
    Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
    and Adobe Audition) (KMM987992I6636L0KM)
    > Sir,
    >
    > The only time that I've see a random tone being generated as you
    > decribe, it was necessary to update the system bios to correct.
    >
    > While we are able to playback and record with the card and it's included
    > software, Adobe continues to not allow you to monitor what you're
    > recording. As best we can tell, there's nothing wrong with the card and
    > I would urge you to check with Adobe for any "monitor recording"
    > switches that may be in their software.
    >
    > For faster service please reply with previous correspondence when
    > replying to this email.
    >
    > Best Regards
    > ,
    >
    > David (00)
    > Team Specialist
    >
    > Technical Support
    > Creative Labs Americas
    >
    >
    >
    > To provide feedback on your "Creative Experience" please click on the
    > following link:
    >
    Link removed
    >
    > This link is provided so that you may provide feedback on your "Creative
    > Experience". If you require further troubleshooting or have additional
    > questions simply reply to the original mail and we will be glad to
    > assist you.
    >
    > Original Message Follows:
    > ------------------------
    > Jeen... I appreciate, very much, your reply. But I don't appreciate
    > trying
    > to be 'ping ponged' back and forth between Creative and Adobe. While I
    > realize that you can only deduce a solution from what I tell you, I
    > believe
    > that if you re-read my description of the problem you will realize that
    > the
    > problem is with the sound card and it's associated software. Otherwise
    > why
    > would the system work as expected when it it turned on the next morning?
    >
    > I would also like to know where the 'tone' comes from. When recording
    > video segment (with audio) through the firewire connection of the
    > Creative Audidgy 2ZS card, after a short while the audio is replaced with a
    > constant tone (as I said, it is about 200 Hz). If I record the video thru the
    > Firewire connection and the audio through the 'Line-In' connection,
    > there is no problem with the recording the audio track 'tone free'. However,
    > sometimes but not always, when the audio is played back the tone will
    > appear. This has happened with both Adobe Premeire Pro .5 and Adobe
    > Audition. It is not in the audio track of Adobe Premeire Pro .5 or
    > Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
    > it's associated software. I'm sure your audio engineers have knowledge of
    > this problem and I would appreciate an answer.
    >
    > Thanks...Bill Allen
    >
    > ----- Original Message -----
    > From: "Creative Americas Customer Support"
    >
    > To: "Bill Allen"
    > Sent: Friday, February 0, 2006 2:5 AM
    > Subject: Re: Creative System Information (English : Adobe Premeire Pro
    > .5
    > and Adobe Audition) (KMM9780I6636L0KM)
    >
    >
    >> Dear Bill,
    >>
    >> Thank you for replying back to Creative Technical Support.
    >>
    >> With regards to your issue, I understand that you are having
    > difficulty
    >> getting the audio to record from the applications Adobe Premiere Pro
    > .5
    >> and therefore not sound during the playback.
    >>
    >> As you have verified that the sound card is working properly with the
    >> other applications on recording or playback, this could be due to the
    >> improper setup for the audio in the Premiere Pro .5.
    >>
    >> You may like to refer to Adobe for assistance on the configuration of
    >> the audio settings as we are not in a better position to advise you on
    >> third party software.
    >>
    >> Should you have not sound or issues with our software, please feel
    > free
    >> to contact us so that we can assist you.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Jeen
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    > "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> Ronshone... Thanks for your reply.
    >>
    >> Here is the information you requested:
    >>
    >> Sound Blaster Audigy 2ZS
    >> PID: 0 03 50 00 00 00 02
    >> Driver Ver: 2.8.4
    >> Firmware : 0.0.0
    >> Model: SB.0350
    >> Serial Number: MSB0350472004288E
    >> Ink stamp: 50SPT470D
    >>
    >> The Audigy 2ZS is the only sound card installed
    >> The Audigy 2ZS card is at least one slot away from the graphics card.
    >> The Audigy 2ZS card is one slot away from another card.
    >> The Audigy 2ZS card is properly seated in the PCI slot.
    >> The PC's internal wires have been moved away from the Audigy 2ZS card
    > .
    >> The 'on-board' sound is disabled thru the BIOS.
    >> The 'on-board' game port is disabled thru the BIOS.
    >> The XP Pro operating system is up to date with all updates.
    >> There were no background operation going at the time of the tests.
    >> The anit-virus program was closed
    >> The CPU is not overclocked.
    >> And, I am the Administrator.
    >>
    >> The card came in a Creative retail Box along with the input unit that
    >> mounts
    >> in the dri've bay. I can't recall what that is called.
    >>
    >> I have relocated the sound card to a slot that is 4 slots away from
    > the
    >> graphics card and slot away from another card, in this case an
    >> additional
    >> IDE dri've controller.
    >>
    >> I have performed the test you outlined. I found that I had to record
    >> using
    >> the 'line in' source input. And I had to playback using the 'wave'
    >> source.
    >> As far as that test is concerned, everything worked. However when I
    >> bring
    >> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
    >> even
    >> though the audio meters in Premeire Pro in indicate that there is
    > audio
    >> playing from the audio track on playback, I hear nothing from the
    >> speakers.
    >>
    >> I then brought up the Creative Speaker Settings requester and did a
    >> diagnostic test. All tests indicated "pass". But when I click on the
    >> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
    >> should
    >> add that in both mixers, the Creative Surround Mixer and the Play
    >> Control
    >> mixer, all inputs and outputs are selected (not muted). Also when I
    >> performed this same test yesterday the 'Speaker Test' worked fine.
    >>
    >> On rebooting, the 'Windows XP' sound is heard from the speakers.
    >> Bringing
    >> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
    >> Test'
    >> in the Creative Surround Mixer also worked as expected.
    >>
    >> I then recorded the rest of my program using the Adobe Premeire Pro
    > .5
    >> 'Capture' requester and when I tried to playback from within Adobe
    >> Premeire
    >> Pro .5 all I got was a constant tone (about 200 Hz), even though the
    >> audio
    >> meters in Adobe Premeire Pro .5 indicated that the audio was good and
    >> had
    >> no constant tone.
    >>
    >> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
    >> program. Without making any changes to either mixers, Adobe Premeire
    > Pro
    >> .5
    >> performed, and the sound played, as expected. In the 'Play Control'
    >> mixer
    >> only the 'wave' was acti've. All the rest were muted. It was the same
    >> for
    >> the 'Creative Surround Mixer'.
    >>
    >> I am at a loss as to what the problem is. Any help would be
    >> appreciated.
    >>
    >> ...Bill Allen
    >> ----- Original Message -----
    >> From: "Creative Americas Customer Support"
    >> @customercare.creative.com
    >> To: "Bill Allen"
    >> Sent: Monday, February 06, 2006 9:42 PM
    >> Subject: Re: Creative System Information (English : Adobe Premeire Pro
    >> .5
    >> and Adobe Audition) (KMM933384I6636L0KM)
    >>
    >>
    >> Dear Bill,
    >>
    >> Thank you for contacting Creative Technical Support.
    >>
    >> With regards to the issue you are having, I would really appreciate it
    >> if you can provide me with the model number of the sound card. It
    >> should
    >> start with CT or SB followed by 4 numbers found on the sound card. I
    >> also need the serial number which can be found on the sticker and the
    >> ink stamp which is printed on the back of the card. This number will
    >> not
    >> be located on any of the stickers and it will not be labeled. It is a
    >> number that has been stamped on the card itself, possibly near the
    >> outer
    >> edge of the card to determine the best advice for you.
    >>
    >> Did the sound card come pre-installed in the PC, comes in a plastic
    >> cover or brown box or did it come in a Creative retail box package?
    >>
    >> Below is a link that may help with the location of the model number.
    >>
    >> Run a keyword search for SID2456 from the link below.
    >>
    Link removed
    >>
    >> I also need you to try the following recording test.
    >>
    >> SELECT THE RECORDING SOURCE IN SURROUND MIXER
    >> . Go to Start Programs Creative SB Audigy Surround Mixer
    >> 2. Click on the Recording Source (should be on the right side of the
    >> mixer under the REC label)
    >> 3. Change the recording source to Analog Mix
    >> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
    >> speaker) that you don't want recorded with the audio stream.
    >> 5. You may wish to select "record without monitoring" by click on the
    >> (+) above the Analog Mix recording source. This keeps the source from
    >> playing out to speakers while recording
    >>
    >> TEST RECORD THE AUDIO
    >> . Go to Start Programs Accessories Multimedia Sound Recorder.
    >> 2. Click the Record button (red dot)
    >> 3. Talk into the microphone
    >> 4. Let it record the source for a little bit
    >> 5. Hit the Stop button (black square)
    >> 6. Hit the play button (single arrow pointing right)
    >> 7. You should now hear the audio that you recorded.
    >>
    >> If you are still having issues, I recommend you to ensure the
    > following
    >> for the audio installation and test:
    >>
    >> - The card is the only card installed other than the Graphics card.
    >> - The card is at least one empty slot away from the Graphics card.
    >> - Place the soundcard away from all the others.
    >> - That the card is seated properly in the PCI slot.
    >> - Move the PC's internal wires away from the soundcard.
    >> - That the on-board sound on your motherboard is disabled through the
    >> BIOS.
    >> - That the on-board gameport is disabled through the BIOS.
    >> - That your motherboard BIOS is up-to-date.
    >> - That the operating system is up-to-date with the latest service
    > packs
    >> and patches.
    >> - That there are no background applications open when you attempt the
    >> solution.
    >> - That the anti-virus program is disabled.
    >> - That if you are over-clocking your system, return all options to
    >> their
    >> recommended settings.
    >> - That you access the PC with administrator rights.
    >>
    >> Do reply back to me if you are still having problems with any error
    >> messages prompted. Thanks.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Ronshone
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    >> "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> User Detail
    >> ----------------------------------------
    >> Name : Bill Allen
    >> Email Address : [email protected]
    >> Self Description : Intermediate PC User
    >>
    >> Creative Product Information
    >> ----------------------------------------
    >>
    >> Problem Type : I need help with a third-party software application
    >>
    >> Problem lies with:
    >> ----------------------------------------
    >> Adobe Premeire Pro .5 and Adobe Audition
    >>
    >> Customer's System Specification
    >> ----------------------------------------
    >>
    >>
    >> Detailed Problem Description
    >> ----------------------------------------
    >> I can hear sound from my computers speakers. The diagnostic tests
    >> performed by the Creative software are all "OK", but I cannot record
    >> audio with either of the two programs mentioned above. I have checked
    >> everything I can think of and all of the settings appear to be "OK".
    > I
    >> have also updated the driver for the sound card. What can I do?
    >>
    >> Attachment :
    >> [ Attachment Type: application/octet-stream Name: CTSi.cab]

    TeamRacing6 wrote:
     b noir,
    I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
    I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
    Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

  • I cannot fine a encore for my premiere pro.

    I need to find an encore for my prmiere pro.  I have completed making my documentry from stills and video clps on Premiere Pro CC.

    The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5 (including using EncoreCS6 with PProCC)

  • Adobe Premeire Pro Installation Failed - Application Manager Corrupted.  Please help!

    Hello all,
    I just recently purchased a subscription license for Adobe Premeire Pro CS6, and tried to download it following the instructions in the confirmation e-mail.   After installing the application manager and downloading, extracting, and installing the program, I received the error message seen in the image below, "Installation Failed - Adobe Application Manager is corrupted and must be reinstalled".  
    So of course I googled it, and found that this was a pretty common problem, and found one site that recommended re-installing the AAM with the following link:
    http://helpx.adobe.com/creative-cloud/kb/download-error-403-launching-aam.html
    So I did that too.  In addition to restarting my computer, and also tried to download the program directly bypassing the AAM following the instructions on this page:
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    All of which was unsuccesful.   I've got a video for my Mom's 60th birthday that I HAVE to complete this weekend, and Adobe's support is closed on the weekends.  I didn't think installing something from a company like Adobe would be this difficult.  Makes me wish I had a Mac.    Can anyone PLEASE help me get Premeire (and Encore) downloaded and installed? 
    Any help would be hugely appreciated.   Thanks,
    Erik
    (Some basic tech info:  Windows 7 Home Premium x64, Mozilla Firefox, and a beast of a gaming rig that should be able to handle a simple Adobe installation)

    Hi Jeff,
    I am experiencing the same exact problem and am unable to resolve it.  I've called Tier 1 support (Indian Call Center), and went through all the steps that I have already done myself (as outlined above) with no luck.  I'm still getting the corruption error. 
    I am using Parallels Workstation Extreme and it is being installed on a Virtual Machine.  The "Extreme" part of Parallels Workstation allows me to assign a discrete graphics card to the VM.  This is uing Intel's vt-d technology for Directed IO.  You mentioned above that you had fired up an instance of Windows 7 64-bit and it worked just fine.  But for some reason, I am unable to duplicate the same success.  The case is now being escalated to "higher" support.  Here is my setup:
    - Parallels Workstation Extreme VM - Windows 7 64-bit
    - Subscription to Creative Cloud
    - Clean Install does not work
    - Not a part of any domain, just workgroup
    - Home PC, so it connects directly to a router and then to Cox (ISP)
    - Has direct assignment of a Network card, meaning the network card is not a bridged connection (the VM gets it's own NIC)
    - User account is already Administrator, but tried to "Run as administratot" with no luck.
    - After install on the clean Windows didn't work, tried using the Adobe Cleanup Tool - doesn't work either
    - Disabled all start up programs from msconfig - doesn't work
    - Verified that the (.exe) does work, but coping the same (.exe) to another computer and it works.
    I would really appreciate any advice that you may have!
    Thanks Jeff!
    Here is what I am seeing from the log:
    02/24/13 20:50:36:197 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | >>> Adobe Updater Log Begin >>>
    02/24/13 20:50:36:197 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
    02/24/13 20:50:36:197 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
    02/24/13 20:50:36:197 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
    02/24/13 20:50:36:197 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | Stepped into << UCInitialize >> call
    02/24/13 20:50:36:214 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UpdateTracker::CheckSignature(): Missing CSUTracker.xml. Checking if it is updater's first run..
    02/24/13 20:50:36:260 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UCInitialize : AAM is launched via CCM.
    02/24/13 20:50:36:261 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | Stepped into << UCSetUpdateEnginePath >> call
    02/24/13 20:50:36:303 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
    02/24/13 20:50:36:303 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
    02/24/13 20:50:36:303 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | UCInitialize: Failed to set update engine path
    02/24/13 20:50:36:303 | [INFO] |  | UPDATER | CORE |  |  |  | 3296 | Returning from << UCInitialize >> call error = 26 retVal = 1
    02/24/13 20:51:34:421 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | >>> Adobe Updater Log Begin >>>
    02/24/13 20:51:34:422 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.42
    02/24/13 20:51:34:422 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\Administrator\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
    02/24/13 20:51:34:422 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
    02/24/13 20:51:34:422 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | Stepped into << UCInitialize >> call
    02/24/13 20:51:34:445 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UCInitialize : AAM is launched via CCM.
    02/24/13 20:51:34:446 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | Stepped into << UCSetUpdateEnginePath >> call
    02/24/13 20:51:34:496 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UCSetUpdateEnginePath : WARNING - Update engine executable signature is not valid = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\CCM\..\UWA\Adobe Application Manager (Updater).exe
    02/24/13 20:51:34:496 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | Returning from << UCSetUpdateEnginePath >> call error = 26 retVal = 0
    02/24/13 20:51:34:496 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | UCInitialize: Failed to set update engine path
    02/24/13 20:51:34:496 | [INFO] |  | UPDATER | CORE |  |  |  | 1392 | Returning from << UCInitialize >> call error = 26 retVal = 1

  • Is Encore part of Premiere Pro CS6

    Is Encore part of Premiere Pro CS6 in the FULL Creative Cloud plan? I asked this in "Live Chat" with an Adobe rep and at first he said no. Then he said yes if I bought the single app plan but not in the full plan. HUH? In the full plan he said it was a 30 day trail. HUH again? Finally he said yes it is but not sure if he just said that to get rid of me.

    Yes, Encore is included with Creative Cloud membership, provided you're running a 64 bit system.
    It's listed here
    http://www.adobe.com/products/creativecloud/tools.html
    It's installed (64 bit systems only) when you install Premiere Pro from the Cloud
    http://forums.adobe.com/message/4397326

  • Is encore included in premiere cc 2014?

    Is encore included in premiere cc 2014? If not, is there a new way to download premiere cs6 that came with encore through the creative cloud download manager?

    JeffreyNijnatten wrote:
    Why so hidden and hard to get for your customers, I've been busy for ONE HOUR to finally found this not outdated way to get a product we pay for but do not get until you've past though the forest of potential options to download it with another product that not every one needs (ppro cs6) and have to remove again but have to be sure you do not remove the program you were looking for with it. Really Adobe??
    I think it's ridiculous that we have to install PP CS6 just to get Encore. I have been saying that since everything went the way of the cloud. I have no issues with the CC model and if for whatever reason Adobe doesn't want to further develop Encore...so be it. But how many times have people asked where Encore is and how do they install it? It would be nice if Adobe would just make Encore a stand alone app in the cloud.
    I recently wiped my drive clean and reinstalled Win 7 Pro. I installed of the CC 2014 apps that I use such as PP, but to get Encore we have to install PP CS6. Even if you want to uninstall PP CS6 you still have Media Encoder CS6, Bridge CS6 left behind...just stupid.
    Adobe, please make life easy and just make Encore CS6 a stand alone install.

  • Dose Encore comes with premiere pro if I buy the premiere pro?

    Dose Encore comes with premiere pro if I buy the premiere pro?

    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has instructions
    The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

  • My 5yr old iMac will not connect to the Internet. All other computers in the house will, including my Mac pro and iPad. What should I do?

    My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?

    Which OS are you using (update your user profile).Try a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • How to embed a video made in Premeire Pro in a Powerpoint

    I just recently started using Premeire Pro to make a short video for a project for my class. I'm having trouble embedding the video in Powerpoint. Any pointers?

    In your export settings.
    What is Premiere Pro? | Adobe Premiere Pro CC tutorials

  • Flash audio out of sync even as image sequence in Premeire Pro

    I'm using Flash CS4 to animate hi-def music videos. It seems that I can't keep the audio to stay in sync for anything over 2 or 3 minutes.
    - I'm working a stage at 1280x720 and 30 fps
    - audio is streamed on a separate layer
    - mp3 publish settings are: stereo 128kbs
    Inside the FLA file everything syncs perfect, but when it's published, everything drifts in the SWF and in everything else I've tried.
    I've tried exporting image sequences and popping the sequences into premiere pro to match up with the original wave, and i've also put the swf file in a premiere pro project as well. Whether a SWF or an image sequence, it always lapses after 2 or 3 minutes.
    I've asked the adobe portal folks and they sent me a link to a "dreamweaver" article...so my regard for their capicity is not high.
    Anyone have any ideas? or am I doomed to never animate anything longer than 2 minutes in Flash?
    The topper of it all is, I've used a friend's REAL OLD Flash MX and have not   had any problems.

    no actually all the animation is smooth and plays fine. but in files longer than 2 or 3 minutes the action starts to happen later and later and later until i'm seeing the animation full seconds after the matching sound. this happens when source wavs are matched to published files inside premeire pro too. it doesn't matter the format...swf / mp4 / flv / mov...any encoding of the video matched to the source wav is the same result as the published swf.
    it's as if there are more frames in the publish than in the FLA. i guess i could compare and contrast by doing some math and creating some traditional x-sheets and completely disregard the reference streaming audio in the FLA...but that would be a ton of work and disregard the convenience the technology is intended to provide. i guess i'll just continue editing together a bunch 1-2 minute publishes until i give adobe even more money in october...boo hiss.
    thanks for your vigilance! i might just be out of luck

  • Just downloaded Premeire Pro, it will not open

    I just downloaded premeire pro to use the trial for 30 days. Every time I click on it to open, it starts to load and then says "Adobe Premeire Pro CC has stopped working" "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is availible"
    I tried uninstalling and reinstalling.
    I am not a computer person, so none of the previous forums have been helpful, as I don't know any of the language associated with determining the software capabilities. I do know I have close to 140GB of free RAM on my computer.
    Can someone help?!?!

    Hi inspiredjoyphoto,
    Thanks for contacting adobe forums,
    What is the OS and version ?
    What is the Graphics Card installed on the system ?
    How much Ram do you have ?
    Do you use any external Hard Drive ?
    If you are using Intel HD Graphics 4000 or Any ATI Radeon Graphics
    Please update the drivers
    Please reply it works or not.
    Happy Editing,
    Sandeep

  • Lightroom to Premeire Pro

    Can I streamline export (photos and videos) from Lightroom directly to Premeire Pro?

    No, you have to export to the hard drive and then bring it into Premiere Pro.

  • If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

    If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

    Here is a link to a page that shows all of the Cloud applications...
    All Cloud Applications:  http://www.adobe.com/creativecloud/catalog/desktop.html

  • Why can't I import MP4 files into Premeire Pro?

    I am on my MacBook pro using Premeire Pro CS6. It won't let me import MP4 files. Please help!
    - Andrew

    Analyze a clip and post a screendump in treeview with the program below.
    MediaInfo Windows
    MediaInfo Mac 
    @ NobeKaycee, please start your own thread in this forum.
    Premiere Pro CS4 & Earlier

Maybe you are looking for

  • Can't figure out how to get my I tunes from one Computer to another.

    When I downloaded I tunes and quick time to my new Laptop and logged into I tunes, I authorized this computer, but can't get my existing library from my PC to my laptop. How do I do that? Can someone tell me please. Thanx! Stashpuppy

  • Yosemite Mail preferences are not saved

    Hello, I just update my Yosemite to 10.10.3. After some problems with Mail, I've been forced to delete container files and enveloppe index file, all is better except that now mail doesn't saved preferences anymore.. Also, the windows positions are no

  • Tax calculation in shipment document

    Hi Experts, We have shipment document and cost calculation in place for inbound material. Now we have one requirement that at the time of GR the following entry should be posted; Inventory Dr GR/IR       Cr Freight Clg Cr Service tax on Freight Cr-pa

  • Why are my images scrolling from outside the Page width?

    Why are my images scrolling from outside the Page width? I am positive i has all the settings correct, to have an image parallax scroll from the edge of the page into the page and out again. But the images are flying in from the browser width - not t

  • How do I match the color of "one-color"-objects in the same picture?

    This is a simple one but I cant seem to find anyone who adress this. I have two objects with different monochromatic color composition (one-color only). I need them to be the _exact_ same color. I..e.: I would like to choose the color of one with the