Is Extension Builder 2.1 using Flash compatible with Photoshop CC also in the future? (There are speculations, that it will be switched off, what will destroy my investment in that code)

I have codes a lot of stuff using Extension Builder 2.1 using Flash technology to be compatible with Photoshop CS6 and Photoshop CC.
There are speculations, that the support for this would be removed in Photoshop CC. This would destroy my investment in this code and my customers would not be able to use my products anymore, when they are using Photoshop CC.
Is there any workaround planed for customers using Photoshop CC to be able to run extension build with Extension Builder 2.1 and Flashbuilder 2.6 also in the future?

Can you supply a link?

Similar Messages

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?

Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef

Garmin GPS not compatible with Firefox - any hope in the future?

Hi there, I've just bought a new Garmin GPS for car. To start it up you need to register the unit. To register the unit you have to download their plug in. When I try to I get a message to say that it isn't compatible with Firefox 5. I'd rather not change from Firefox, so I'm just wondering if it will be compatible in the near future? It appears to have been compatible with Firefox 3.6+ - so perhaps you could tell me how to revert to that if possible for now? Thank you, Eva

Compatibility of the Garmin Communicator Plugin is up to Garmin. Look for an updated version of that Plugin at the Garmin web site.

I have Photoshop CS3 Extended and use it on my Windows PC Having bought a Nikon D5200 I have been unable to use the camera on the raw settin g with Photoshop.I have downloaded the Camera Raw 8bi dowload as advised but my computer Windows 7 will not recogn

I am having difficulty opening raw images with my version of photoshop CS3 extended. I have a Nikon D5200 which according to adobe it is supported but when I try to download a camera raw patch 8bi it wont recognise the file format.Can anyone offer a solution which will enable me to use photoshop with my D5200 when shooting in raw? I have windows 7 operating system.

Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

Any official Update for Flex Builder 3 to use Flash Player 10 Api?

Any official Update for Flex Builder 3 to use Flash Player 10
Api?
How can i use flash player's 10 features in flex builder 3?
Thanks

I was able to solve my problem by modifying the solution
offered in
this
technote.
The technote identifies a permissions problem with the
components directory of non-Safari browsers. In my case the
permissions problem appears to have been in the main
/Library/Internet Plug-Ins directory. What tipped me off to the
solution was the fact that after manually removing Flash
Player.plugin and flashplayer.xpt from the /Library/Internet
Plug-Ins directory, subsequent attempts to install Flash Player
resulted in the "Creating file: 1008:5, -5000 Access Denied Error"
I remembered seeing in the technote. Before removing these files,
the installer would just fail silently, perhaps because it saw
files it was going to install already living in the right place,
and furthermore had no permissions to alter the directory.
In any case, by making the permissions change recommended in
the technote to the /Library/Internet Plug-Ins directory, I was
able to install the plug-in, which gave me back access to Flash
content in all my browsers.
Hope this is helpful to someone else...
-Erik

Is Adobe Flash compatible with WinXP using `Dual Core CPUs ??

Is Adobe Flash compatible with WinXP using Dual Core CPUs ??
I have this in my current system
WinXP 32bit SP3
Asus M2N68-AM Plus motherboard
AMD X2 7850 Black Edition Dual Core CPU
2GB DDR2
WD Caviar SE16 500GB SATA drive
Onboard VGA **only**
I keep having consistent problems using this new motherboard with a Dual Core CPU
My new motherboard keeps crashing randomly while watching video online.
I can watch a video for about 2 min or even 20min and then the PC randomly crashes
I get this weird mosaic pattern on the screen whenever it crashes and then I have to press Reset to Reboot
And it **only** crashes after streaming a video on any of the websites, YouTube, CBS.com, NBC.com, Hulu.com etc, etc
My last PC never crashed while watching a video online - it was just slow since Adobe player is a hog -- and it was still a 1.8GHZ CPU !!
My last PC is still using version 10.1 for the Adobe Flash player -- and it ***never*** crashes
The most I ever see happen on that one is that the player might occasionly crash in the video window and the error message says to reload the Flash player.
Then I tried this remedy of disabling the Hardware Acceleration in the Adobe Settings -- but no luck still.
I even downgraded to 10.1, then 10.0 and it still keeps getting these random crashes while watching video
I'm wondering if WinXP 32bit is really compatible with Adobe Flash when using a Dual Core CPU
Before I plunk down $100 for Win7, I'm thinking about trying Ubuntu and see what luck I have.
I haven't seem anything to the contrary yet.
thanks,
Message was edited by: Ragoooman

What browser & version do you use?
How exactly does that "crash" manifest itself? What exact error message are you getting?
Have you tried to update the device drivers for your graphics/video/display adapter?

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.5.0_06 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

IPhone 2.0 software now compatible with Photoshop Elements 6?

While the current software is compatible with earlier versions of Photoshop Elements, it is not compatible with Elements 6 since Abobe changed their database (nor longer using Access). I notice that the specs on iPhone 3G say compatible with Photoshop Elements.
Can anyone confirm that means Elements 6?

However, to be fair, while there may be savings to be had, your company would have to replace existing phones with iPhones and tie everyone into one carrier (which accross a multi-office environment may not be practical, due to coverage issues). The iPhone does not offer the level of encryption available to a Blackberry/RIM handset, or the ability to enforce security policies on handsets, which may be a concern to your IT and Security people. It also misses some useful features (such as searching email for words/phrases. This is a feature I use regularly on my Blackberry, and I'm disappointed to not find it on my iPhone. ). And there is the whole, One Vendor issue that may worry some (you can connect non-RIM, e.g. Nokia, etc, phones to your BES providing the phone supports the required blackberry software).
I've got to say, as much as I love my iPhone (and I'm personally migrating from my blackberry to it) I don't think I'd recommend it as an enterprise phone.... yet... It's still got a way to go. As a personal+business phone, I'm giving it a shot (as the personal side is quite good). My current employer is a small company, with no BES, so I use my carrier's BIS, and get by with it. As such, the calendar+contacts sync available through mobileMe is a plus . If I was planning IT direction for a larger organisation though, I'd be considering the iPhone (if for no other reason than an excuse to play with one ), but I wouldn't be preparing a migration just yet!

Existing Actions and Plugins Compatible with Photoshop CS5?

I have actions and plug-in products, and while I've done everything I can to make them future-proof, I'm wondering if any Photoshop CS5 beta testers can speak to whether existing actions and plugins are generally compatible with Photoshop CS5?
Specifically:
Are existing 32 bit Windows (PC) plugins proving to be compatible with Photoshop CS5?
Are existing 64 bit Windows (PC) plugins proving to be compatible with Photoshop CS5?
Are existing actions (both platforms) proving to be compatible with Photoshop CS5?
I'm anxiously awaiting the go-ahead to download my copy to verify everything, but I'm just trying to get a feel for whether I'll have work to do. I'm hoping for the level of compatibility seen in CS3 and CS4 - all my software worked perfectly with no changes.
Thanks.
-Noel Carboni
ProDigital Software
<link removed>

I appreciate you all taking the time to answer, but none of you has actually said what DOES happen with your existing actions / plugins and CS5 beta.
I know that experience with one set of actions and plugins doesn't guarantee operation with another, but if, for example, someone actually stated, "all my old plugins failed to work with CS5" or "they all seemed to work okay" then I'd have a better idea of what to expect.
Please keep in mind I've been developing commercial actions since PS6 and plugins since CS2, and all my software works on all 32 bit versions and 64 bit CS4 on Vista x64 and Windows 7 x64, so I'm intimately familiar with what might happen and what should happen. Plus I've programmed them to be quite resilient, and I don't expect any of the CS5 feature changes to break them. What I don't know is whether Adobe has fundamentally altered the plugin interface this time around, or has deprecated any old filters, causing a plugin or action that used to work to fail now. The word "rewrite" has been used to describe CS5, and that has me wondering.
In short, I'm really looking for actual experience with the CS5 beta here.
Wish I could get the CS5 SDK already. I don't understdand why Adobe doesn't release that in advance.
Thanks.
-Noel

How to download versions of apps compatible with OSX 10.7 not the ones updated for 10.9

how to download versions of apps compatible with OSX 10.7 not the ones updated for 10.9?
I'm trying to download iLife and iWork apps for my MacBook. For example: The GarageBand app will not download because it says it is compatible with 10.9. I have 10.7 and cannot update to 10.9 because I'm on a 13in. Late 2007 MacBook. Any suggestions?

Click here and follow the instructions. If they’re not applicable, you can’t download them and need to install them from a DVD.
(108988)

I'm using my iPad with iOS v 6.1.3- is there a security patch for the SSL/TLS vulnerability for this, or do I have to go to 7.0.6?

I'm using my iPad with iOS 6.1.3. Is there a security patch for this version, or do I have to update to iOS 7.0.6?

There is an update for iOS 6... v6.1.6. But it is only available to iPhone 3GS and iPod touch 4th gen users. http://support.apple.com/kb/HT6146?viewlocale=en_US&locale=en_US
For iPad, the highest supported os for iOS 6 is v6.1.3. If you want to get the security patch, you'll have to go to iOS 7.0.6.
Hope this answers your question.
~Joe

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

Hi, using a macbook with photoshop and saving to mem stick,

Can i use a macbook with photoshop save to a mem stick then use the same files on a windows pc wih photoshop?

Yes, of course.
Why would you expect a difference or problem between platforms?

Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8

I purchased a CanoScan LiDE 220 scanner. My Adobe Photoshop Elements 6 & 8 do not recognize CanoScan LiDE 220,
When I go to File and import CanoScan LiDE 220 does not appear.
Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8
Thankyou
Ken

Looks like it exceeds PSE 12 System Requirements.
http://www.adobe.com/products/photoshop-elements/tech-specs.html

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Is Extension Builder 2.1 using Flash compatible with Photoshop CC also in the future? (There are speculations, that it will be switched off, what will destroy my investment in that code)

Similar Messages

Maybe you are looking for