Is external antenna required for Late 2004 Bluetooth to function?

I have a G5 Late 2004 with the blue module installed, but i don't have the external antenna. Is this required for operation, or is my module bad? It shows up in profiler,but won't connect to anything. Also, if it is required, does anyone know a good place to purchase one.

Bluetooth is a short-range wireless technology, and you're going to shorten that extensively if you don't have an antenna. As you're seeing, it probably won't even work without the antenna.
The external antenna is about $30 from Mac-pro.com.
Are you missing the Airport antenna as well? Both antennas were in the same bag, as I recall.

Similar Messages

  • Installer LV7.1 - LabVIEW load error code 21: An external subroutine required for execution could not be found.

    Bonjour,
    Je cherche à créer un installer portatif utilisant les drivers NI-DAQmx 8.7.1 et NI-CAN 2.6.0.
    Je dispose d'un code LV 7.1 et j'ai installé l'application builder 7.1.
    Mais une fois l'application installé sur un PC vierge de Labview, j'obtiens le message suivant:
    load error code 21: An external subroutine required for execution could not be found.
    Ce message est répété plusieurs fois (pour différents VIs) puis le programme ne se lance pas.
    J'ai bien veillé à installer les drivers NI-CAN et NI-DAQmx correspondant au préalable sur la machine cible.
    En chercant sur le forum, plusieurs pistes m'ont été proposé:
    La version NI-DAQ
    L'intégration du Run time Engine
    Un problème de DLL
    J'ai vérifié ces 3 points mais cela n'a pas règlé mon problème.
    Résolu !
    Accéder à la solution.

    Bonjour,
    Merci de ta réponse.
    En fait, j'ai bien inclu le runtime engine de Labview qui était effectivement la source de l'erreur.
    L'installation de NI-DAQmx v 8.7.1 provoque la mise à jour de la version du runtime engine (passage de 7.1 à 7.1.1).
    J'ai donc désinstallé Le runtime engine 7.1.1 (ce qui a provoqué la désinstallation de labview et NI-DAQ).
    Puis je suis passé par une version plus ancienne de NI-DAQ (7.2) que j'ai adapté (inclusions de DLL et de VIs).
    Les messages d'erreurs ont alors tout simplement disparus!

  • "an external subroutine required for execution can not be found."

    My application Intermittantly displays "an external subroutine required for execution not be found." The exe file is located on a local server. The missing file is a call to hostname.dll . If I run the exe file on the local machine the error message is not diplayed.
    Why?

    It sounds like an intermittent problem with the connection to your local server. It also sounds like there's a lot of traffic on the network every now and then, which is most often true on most networks.
    Are you calling this external subroutine as fast as you can? If you are, try slowing it down. Adding some delays might take the problem away.
    The second suggestion is to not be dependent on network files. If you do, add some sort of error checking capabilities to your program so that it will know to try again if the file cannot be loaded fast enough.
    Must the .dll be located on the server? If you're planning on running your application fast, you definitely want to keep everything on the local machine.
    Just my suggestions. Hope that helps.
    Shan Pin Koh

  • External Boot Disc for Late 2008 MacBook

    Will the MacBook 13-inch Aluminum boot from an external USB disc (SuperDuper bootable clone)?
    If so, any special requirements for this to happen? (Select external disc with Startup Disc, or use option key at startup and select system from which to boot as before?)
    (Previous Books would only boot from Firewire external discs...)
    ...JB

    I boot both Intel-based and PowerPC-based Macs from APM partitioned USB and FireWire hard drives every day at work. We have to have the APM partitioned because the PowerPC-based Macs will NOT boot from a GUID-partitioned hard drive. Our hard drive need to be able to boot both so we can use the same hard drives to install Leopard on either platform.
    EDIT: Intel-based Macs can startup from either a GUID or APM partitioned drive. However, looking into it further, Intel-based Macs can only INSTALL Mac OS X to a GUID-partitioned drive. If Mac OS X 10.5 is already installed on an external drive, it doesn't matter what the partition format is.
    http://support.apple.com/kb/TS1600
    I don't specifically remember installing Mac OS X 10.5 on an APM-formatted external hard drive from a PowerPC-based Mac, but it's possible I did. It's just my own tower and my one test iMac at work are both Intel-based Macs. I'm not sure what computer I might have used to format and install Mac OS X 10.5 onto our external drive...
    Of course, if you only have an Intel-based Mac, there's no reason to bother with the APM format. You could use the Disk Utility to "restore" your Intel-based Mac to an external drive with either partition scheme and it would be bootable. It's only the Mac OS X installer that would stop you if you had the wrong format.
    -Doug

  • External Antenna Adapter for Centro?

    I'm looking for an antenna adapter so I can attach an external antenna for my new Centro. I realize that it's brand new, so I haven't seen any specific adapters for it. However, are there other phones (like older Treos) that use the same size?
    If I don't find one, I'll have to return it because the signals are terrible at my house without an antenna.
    Post relates to: Centro (Sprint)

    AT&T is supposedly experimenting with "femtocells" (I think I spelled that correctly!) 
    Small stations that rebroadcast cellular reception, similar to Wifi routers.
    Article here:
     http://www.phonescoop.com/news/item.php?n=2970
    WyreNut 
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • ESATA for "late 2004" G5?

    Has anyone had success adding eSATA to a "late 2004" G5? This computer has PCI slots, but no PCIe.

    eSATA can be added to your G5 with an eSATA controller card like those from FirmTek and Sonnet.
    I use Firmtek's SeriTek 2SE2-E controller card and their 2EN2 drive enclosure on my G5 (although my G5 uses PCIe).

  • External Antenna Mount for AIR-ANT5160NP-R

    I about to embark on a project to create a wireless bridge using a pair of Cisco Aironet 1252's, which will be mounted internally, and a pair of Cisco Aironet 5-GHz MIMO 6-dBi Patch Antenna (AIR-ANT5160NP-R), which will be mounted externally.
    Could anyone suggest the best way to mount the antenna? Both will be mounted to steel upper wall of the building (its brick below this). I couldn't find any specific mounting kits.

    My bad on the metal wall mounting, it was late and I was tired.
    Now  that I have slept some here is what I am thinking.  Why use the MIMO  patch antenna?  On such a short link you can use an omni stick.  Then  mount this to a wall mount antenna bracket such as this -  http://www.google.com/products/catalog?q=wall+mount+antenna+brackets&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&cid=6140961992914474386&ei=NCXlTKHiIYKglAfVw6XjCw&sa=X&oi=product_catalog_result&ct=result&resnum=1&ved=0CC8Q8wIwAA#
    You  would only need one bracket for each location and can secure the  bracket to the metal wall with either large self tapping screws or using  butterfly bolts.
    If you are worried about your  signal propogation then make sure your link is encrypted with AES and  that your power is at minimum to establish the 54M link.
    I would use the AIR-ANT5160V-R antenna.

  • Need external antenna connector for old Nokia 5110...

    Hi all, this is a long shot I admit, but doesn anyone know what type of connector (and where to purchase) was used on the old 5110/6110 Nokia phones, it is the external connector located on the rear behind the rubber grommit use for the car kits... I need some of those connectors.
    Can anyone help?
    Thanks in advance.

    Hi omega1
    I should be able to help you.
    If you want to connect your 6110/6150/7110 to an external connector, we have a adaptor lead to do just this.
    Plugs into rear antenna socket with short lead to fme plug - then you can connect your antenna cable to this.
    Let me know how many you need.
    Moderator note: E-mail address and Contact number removed.
    Message Edited by wildreamer on 31-Oct-2009 04:24 AM

  • External drive requirements for FCP - multicam 1080

    I am running FCP X on a 2011 iMac i7 with 16Gb RAM, a SSD boot/system drive and the original 2TB HDD for user folders/data.
    I have started using FCP multicam editing with 6 1080/30 GoPro events/angles.  Without using proxy editing, playback within the angle viewer is very poor - lots of drop outs and pauses - essentially unusable.
    I switched to proxy editing and now playback is much better, but when I insert a 'cut' to another angle, there is a 1-2 second pause before playback resumes.  Seems like I'm right on the edge.
    I am assuming my problem is an old, slow and 60% full internal HDD.
    (I may have enough space on the SSD to test working off that drive).
    Thus, I am considering using an external drive for the video library, or even moving all the user data off the old internal HDD and onto a much faster and larger TB drive.
    My question is around what is 'fast enough'.  For instance, will a modern 4TB (TB interface) single drive be 'fast enough' for the example video project without proxy editing?  Do I need a multi-drive array for speed?  I have been considering something like a Promise Pegasus2 R4 in Raid 5 config with 4x1TB or 4x2TB.  I assume that will be fast enough??
    Any recommendations?
    db

    6 1080p angles need a lot of bandwidth.
    Working with proxies, as you have, is likely necessary, unless you have a RAID or a large enough SSD.
    One other thing is you can try is to keep the angle viewer closed as much as possible. If you know your material well you can cut "blind" by merely using the keyboard shortcuts 1 through 6.

  • Voltage requirement for late 2008 17" MacBook Pro

    I bought a used 17" MacBook Pro - vintage late 2008 and have been having power issues with it.  Screen flashing, system crash.  Streaming video online, system crash. 
    Took the battery out and held down the power button for about 30 seconds to discharge the battery, after which things are OK for a while.  But then it started up again.  So I took the battery out and did it all again.
    I'm wondering if the power adapter that came with the machine is for the wrong voltage?  I see that there are three different voltage levels available. 
    Can anyone tell me what is the correct adapter voltage for my machine?
    Thanks!!
    Judith

    Bring you MBP and power adapter to an Apple store.  If you need a new one, it will cost $79.
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • Best iPhone 5 external antenna solution for use in a vehicle Australia

    I will be doing a fair bit of driving through regional Australia where Telstra (and other telco) reception is very poor to non existent without using some kind of antenna to increase reception range. From my research I have found several solutions, my pick being the smoothtalker cradle and high gain 6.5dB antenna.  I would like to know if anyone has experience with this particular solution as well as other solutions other people are using or know of. Thanks in advance.

    I have a friend that uses the Wilson Cell Phone Vehicle Signal Booster in poor reception areas. It claims to boost reception by as much as 25 times. Not sure about all that but it certainly helps!

  • Best method for importing mini DV tape movies directly to an external seagate hard drive for later import to iMovies ??

    Best method for importing mini DV tape movies directly to an Seagate external hard drive,for later import to imovie event???

    The simplest and cheapest option is LifeFlix.  They have more info at www.lifeflix.com or on the Mac app store at https://itunes.apple.com/us/app/lifeflix/id630212114?ls=1&mt=12

  • External antenna for iPhone4 in car to reduce radiation

    I want to use my iPhone for navigation and phone in the car but I'm worried about radiation.
    A few weeks ago the WHO is warning about healthproblems and brain-cancer based on using cellular phones also.
    Is there any external antenna product for the iPhone 4, so the antenna of the iPhone itself will be deactivated after connect (by using inside the car)?

    as far as I know there is no option for an external antenna
    but navigation is gps which mean it don't transmit any signals at all (so it don't create any radiation whatsoever)
    only part that create "radiation" is the phone and wifi part as they are 2 way systems which both recieve and transmit data

  • Car Cradle for Charging and External Antenna Compatible with Tour

    Is there a car kit that allows easy charging and connection to external antenna for the Tour?  I had Comfort Cradles by Bury for my last two BlackBerrys, but I just was disappointed to learn that Bury does not have or even plan one for the Tour.  Any suggestions?  If I had known this before, I probably would have stayed with my 8830.  Thanks.

    To answer my own query - I just spoke to someone at Smoothtalker and was informed that Smoothtalker will be releasing a charging cradle, with external antenna conttection, for the "Tour" in "about a month." 
    I still would be interested in hearing from anyone else with any information concerning this.
    Thank you,.

  • External Antenna for MBP to Boost Receiving Strength

    Is there an external antenna available for the MBP that would boost its receiving strength of wireless networks?

    Not yet. Give it a bit and then try MacWireless or Dr. Bott - they typically provide that sort of product.

Maybe you are looking for

  • Capacity check in wm

    HI, I have been working on few strategies in putaway. One of the storage type which uses open storage strategy with mixed, addition to existing are allowed. With capacity check based on material. I have issue at time of creating transfer order. pleas

  • InDesign Transparency Effect vs. pdf file size

    I have an Interactive pdf that was created from InDesign. There is  "inner glow" is an effect style created box style. This box style is used a number of times in the 30  page document. The glow is a gradient from black to transparent which looks  li

  • Since updating to firefox 25 my "undo closed tab", "restore recently closed tabs", and "restore previous session" are greyed out, I have tried resetting default

    I have only had this problem since updating to firefox 25. I have already tried resetting the ff deafaults. it did restore the "undo close tab" for a short while. but when i exited and restarted ff i have the same problem again. I don't want to have

  • Database Restoration

    Hello  ,         My Question is i have taken a backup of database from sql server 2012 and i trying to restore on sqlserver 2008 it's showing me error. I know why its giving me error. But  i want know is there any solution for this problem or is ther

  • What is order of execution in Sequence container

    hi all,  I want to know the order of execution in sequence container. we have sequence container and loading 20 dimension table but no precedence constraints between the task, each tasks are separate.  What is the flow of execution, is sequence conta