Is extract for datafile possible ?

A few days ago my collegue oracle installation was damaged
(system tabelspace control files etc). Accidentaly Windows Server ntbackup was suspended then dumps which he has are old. Some datafiles looks healthy is any method to restore data ?

Hi
If you are thinking to use transportable tablespaces, in this situation it is not possible. In fact to transport a tablespace an export of the data dictionary information about the tablespace must be performed... but if the system tablespace is damaged is of course not possible!
Chris

Similar Messages

DART: creating extracts for company codes

Hi,
in light of an archiving project of financial documents, extracts needs to be build with DART. This has to be done on the level of company code. We would like to have approval from the FI department for the DART extracts, but we have currently 22 different company codes.
Do you have experience with creating extracts for multinational companies, and what was your way of working for getting approval before archiving ? Were there any external tax auditors involved ?
thanks for sharing,
kind regards,
Rolf

Hi Rolf,
For your project you have to make a table with document type's G/L accounts how long you want to let them them in your system. This form (table should be signed of by the bussines and auditors.
Note: When you archive data for FI you can archive the documents (BKPF/BSEG and line items. When you only archive the documents you can still see al the postings on line items. When the archive files are still available you can go direct from the line item to the achived document. Have a look to to the archive information system perhaps here you can store more information with linkes to the archive system?
In some FI reports it is possible to get information out of SAP and the archive system.
With the table make a proprosal by yourself and let sign that.
Think about that a lot of information is stored on other places to, like controlling and PCA. Offen there is no reason to keep the FI documents the information is still somewhere els available
Paul

Delta extraction is not possible at the moment

Hello,
I am trying to run a delta load and am getting the message "Delta extraction is not possible at the moment". This is actually a repeat because i have tried this load multiple times with no success.
The Diagnosis in the error message is:
The delta extraction is not possible at the moment because the status list of the request is locked in the Cube. This can be for a number of reasons:
1. Another extraction is taking place in the target BI.
2. The control parameters of the request in the InfoCube are locked by deletion or compressing processes.
I dont see that any other extraction or a deletion or compression job. I've tried going through each failed job in the monitor and red lighting them but that hasnt helped. Any ideas what to check or how to fix the problem?
Regards,
TMS

Hi,
From what you are describing, there is already some process going on on the infoprovider you are trying to load the data to. Check if a data load is still active/activation is happening, if its a cube then are there aggregates and are they rolling up. You can check the process in SM66 or SM50 and the jobs in SM37.
The process has locked the infoprovider and no delta or for that matter any process can be done until the earlier one finishes. You can take help from the BASIS team to find out what is locking your infoprovider.
Cheers,
Kedar

Delta extraction for masterdata object

hi,
can anybody tell me the procedure for delta extraction for master data object.
is it possible!

Master Data Datasources do allow for delta extraction. You can display datasource in RSA6 and check if it is delta enabled. You will have to initialize with delta to perform delta extraction. RSA7 will give you delta queues in R/3

2 extract for 1 replicat

Hi all
i have one problem, i will create 2 database instance then configure goldengate each database instance.
sourceschema t1.rep_table01 DB1 (extract process) --|
|----> destination schema dest.rep_table01 DB03 (replicat process)
sourceschema t1.rep_table01 DB2 (extract process) --|
this topology possible on Oracle GoldenGate 11

I'm guessing your question is not really 2 Extracts for 1 Replicat, it's that you have two source tables feeding 1 target table, which is totally possible with GoldenGate as long as the table on DB1 is segmenting the key values from DB2's key values, so that you don't have conflicts on DB3.
And as Antony points out, you would use 1 Replicat for each Extract, and those two Replicats would be applying data to the 1 DB3 table, asynchronously. So again you'd have to ensure uniqueness between DB1 and DB2 data.
And if you are asking about 1 Replicat for 2 Extracts, you can't do that, nor can 2 Extracts write to the same trail, so you'll have to do 1 Extract and 1 Replicat per DB.

ASM Disk preparation for Datafiles and FRA in Oracle 10g RAC Inst

Dear Friends,
Please clarify wheteher the below method is correct to confiure ASM disks for Datafiles and FRA
Partitions provided by IT team for OCR and Voting Disk
/dev/sda1 - 150 GB (For +DATA)
/dev/sda2 - 100 GB (For +FRA)
OS : RHEL 5.6 (64 Bit)
kernel version = 2.6.18-238.el5
Steps:(Node1)
1) Install the RPM's for ASM
rpm -Uvh oracleasm-support-2.1.7-1.el5.x86_64.rpm
rpm -Uvh oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
rpm -Uvh oracleasmlib-2.0.4-1.el5.x86_64.rpm
2) Configure ASM
/etc/init.d/oracleasm configure
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
3) Cretae ASM Disk
/etc/init.d/oracleasm createdisk DISK1 /dev/sda1
/etc/init.d/oracleasm createdisk DISK2 /dev/sda2
4)/etc/init.d/oracleasm status
5)/etc/init.d/oracleasm scandisks
6)/etc/init.d/oracleasm listdisks
7) Nothing to perform on Node2
8) In dbca choose ASM and map the DISK1 for datafiles and DISK2 for FRA
Please confirm the above steps are right?if not please clarify
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?
Please refer any document / Metalink ID for the above complete process
Can i have ASM and oracle DB binary in the same home
Regards,
DB

user564706 wrote:
If DBCA ->ASM doesn't discover my disk then what should be the Discovery path i have to give?for asm disk created with oracleasm discovery path variable is ORCL:*
Please refer any document / Metalink ID for the above complete processhttp://docs.oracle.com/cd/B19306_01/install.102/b14203/storage.htm#BABIFHAB
Can i have ASM and oracle DB binary in the same homeyes. unless you want job role seperation or plan to run multiple versions of oracle homes
>
Regards,
DB

Restore - filename for datafile is missing in the control file

I am practicing RMAN recovery procedures and I encountered a problem that I do not know how to solve.
1) I took a hot backup of my test database.
2) Create tablespace TS_DATA_TEMP
3) Deleted tablespace TS_DATA which had 2 datafiles
4) Created tablespace TS_DATA with 1 datafile
5) shutdown database
6) logged into RMAN in nomount
7) restore controlfile from autobackup;
8) alter database mount;
9) restore database;
RMAN> restore database;
Starting restore at 22-AUG-08
using channel ORA_DISK_1
the filename for datafile 5 is missing in the control file
skipping datafile 1; already restored to file /u02/oradata/EDM91/system01.dbf
skipping datafile 2; already restored to file /u02/oradata/EDM91/undotbs01.dbf
skipping datafile 6; already restored to file /u02/oradata/EDM91/index
skipping datafile 3; already restored to file /u02/oradata/EDM91/sysaux01.dbf
skipping datafile 7; already restored to file /u03/oradata/EDM91/TS_INDEX01.dbf
skipping datafile 9; already restored to file /u03/oradata/EDM91/TS_LOB01.dbf
skipping datafile 4; already restored to file /u02/oradata/EDM91/users01.dbf
restore not done; all files readonly, offline, or already restored
Finished restore at 22-AUG-08
10) tried to recover
Starting recover at 22-AUG-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/22/2008 15:04:22
RMAN-06094: datafile 5 must be restored
SQL> select name from v$datafile where file#=5;
NAME
/u04/oradata/EDM91/TS_DATA.dbf
12) alter database backup controlfile to trace
DATAFILE
'/u02/oradata/EDM91/system01.dbf',
'/u02/oradata/EDM91/undotbs01.dbf',
'/u02/oradata/EDM91/sysaux01.dbf',
'/u02/oradata/EDM91/users01.dbf',
'/u04/oradata/EDM91/TS_DATA.dbf',
'/u02/oradata/EDM91/index',
'/u03/oradata/EDM91/TS_INDEX01.dbf',
'/u04/oradata/EDM91/TS_DATA02.dbf',
'/u03/oradata/EDM91/TS_LOB01.dbf'
CHARACTER SET UTF8
So i'm not sure what the problem is. Datafile TS_DATA.dbf is located in the control file but i'm getting the error: the filename for datafile 5 is missing in the control file.
Suggestions on what's wrong with the control file?

I found my mistake; a newbie error.
I did not know I needed to include in my restore command the 'until' option when doing incomplete recovery. I only included the 'until' option in the recover command:
original command
restore database;
recover database until sequence =123;
should be
restore database until sequence = 123;
recover database until sequence =123;
I usually run the command using a RUN block with a SET UNTIL SEQUENCE but this case I used the single commands separately.
RUN
+{+
SET UNTIL sequence 123;
RESTORE DATABASE;
RECOVER DATABASE;
+}+

Best way to have resizeable LUNS for datafiles - non RAC system

All,
(thanks Avi for the help so far, I know its a holiday there so I wait for your return and see if any other users can chip in also)
one of our systems (many on the go here) is being provided by an external vendor - I am reviewing their design and I have some concerns about the LUN's to house the datafiles:
they dont want to pre-assign full size luns - sized for future growth - and want more flexibility to give each env less disk space in the beginning and allocate more as each env grows
they are not going to use RAC (the system has nowhere near the uptime/capacity reqs - and we are removing it as it has caused enormous issues with the previous vendors and their lack of skills with it - we want simplicity)
They have said they do not want to use ASM (I have asked for that previously I think they have never used it before - I may be able to change their minds on this but they are saying as not RAC not needed)
but they are wondering how they give smaller luns to the env and increase size as they grow - but dont want to forever be adding /u0X /u0Y /u0Z extra filesystems (ebusiness suite rapidclone doesn't like working with many filesystem anyway and I find it unelegant to have so many mount points)
they have suggested using large ovm repo's and serving the data filesystems out of that (i have told them to use the repo's just for the guest OS's and use direct phy's attached luns for datafiles (5TB of them)
now they have suggested creating a large LUN (large enuogh for many envs at the same time [dev / test1 / test2 etc]) .... and putting OCFS2 on it so that they can mount it to all the domU/guest's and they can allocate space as needed uot of that:
so that they have guests/VM's (DEV1 - DEV2 - TEST1 say) (all seperate vm's) and all mounting the same OCFS2 cluster filesystem (as /u01 maybe) and they can share that for the datafiles under a sep dir so that each DB VM would see:
/u01/ and as subdirectories to that DEV1 DEV2 TEST1 so:
/u01/DEV1
/u01/DEV2
/u01/TEST1
and only use the right directory for each guests datafiles (thus sharing the space in u01(the big LUN) as needed per env)....
i really dont like that as each guest is going to have the same oracle unix user details and able to write to each other dir's - id prefer dedicated LUNS for each VM - not mounted to many VM's
so I am looking for a way to suggest something better....
should I just insist on ASM (but this is a risk as I fear they are not experienced with it)
or go with OEL/RHEL LVM and standard ext filesystems that can be extended - what are the risks with this? (On A Linux Guest For OVM, Which Partitions Can Be LVM? [ID 1080783.1]) - seems to say there is little performance impact
or is there another option?
Thanks all
Martin
Edited by: Martin Brambley on 11-Jun-2012 08:53

Martin, what route did you end up going?
We are about to deploy several hundred OEL VMs that are going to run non-RAC database instances. We don't plan to use ASM either. Our plan right now is to use one large 3TB LUN virtual disk to carve out the operating system space for the VMs and then have a separate physical attached LUN for each VM that will host a /u01 filesystem using LVM. I have concerns with this as we don't know how much space /u01 will ultimately need and if we end up having to extend /u01 on all of these VMs, that sounds like it will be messy. Right now I've got 400 separate 25gb LUNs presented to all of my OVM servers that we plan to use for /u01 filesystems.

How to find Extract for the bank key/ bank account changed in vendor maste

Hello Gurus,
I need help in finding the extract for the bank details of vendors changed for a period of time. I tried using FK04 under multiple selection and ran the report for the selected vendors. It only shows the "bank details created" or "bank details deleted" under Old Values and New Values but doe not actually shows the values for the field changed.
Is there a way where i can get a report which shows a log of change in bank details with old and new values,
Thank you,
Prakash

HI,
Try using report RSSCD100 and give the selection condition
Object id --> BANK
and then you can limit the results by specifying the time and date range..

How to create a System Extract for Communication

Hi,
I've built System Extracts before but not for Communication. Does anybody know what the steps are to create a System Extract for Communication? I already built a particular Communication Type and the delivery method is email. I was told that Oracle only creates the trigger for this Communication Type but not the email. If I built the System Extract Communication and run it, is that supposed to send an email? and if so, what kind of information will be sent in the email?
Thanks,
Ronaldo

Hi James,
If you like to use SAP web dispatcher as a solution for load balancing portal application, you no need to create system object under systems..
You have to install web dispatcher as separate instance where you need to configure portal apps into it..
Configure web dispatcher like to hit the admin port, use http://<webdisp-server>:<adminport>/sap/admin
For normal portal access, use http://<friendly URL>/irj/portal
The good news is that the webdispatcher knows that the portal supports SSL
Another advantage of this config, is the webdisp, will just replace the apache redirect server. Users will access mycompany.com, without any port number, since we are redirecting 80 to the backend j2ee. Also, https should work like in the normal world.
Profile will be like below...
SAPSYSTEMNAME = WEB
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
Message Server Parameters ##########
NOTE: The "ms/http_port" must match the profile on the Central Instance
rdisp/mshost = <FQDN of portal CI Host>
ms/http_port = <Ms port of portal>
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=3600, EXTBIND=1 (some OS will not allow to bind ports <1024)
Admin port details
icm/server_port_1 = PROT=HTTP,PORT=3200
#, EXTBIND=1
icm/HTTP/admin_0 =
PREFIX=/sap/admin,DOCROOT=./admin,PORT=3200,AUTHFILE=/usr/sap/WEB/SYS/global/security/data/icmauth.txt
SSL
icm/HTTP/redirect_0 = PREFIX=/ , TO=http://<friendly URL name>/irj/portal
WebAS Message Server Parameters
rdisp/TRACE = 1
icm/trace_secured_data = 1
Regards
Suresh

Rman backup command hangs for datafile ,works with archivelogs backup.

Issue is archivelogs backup is going fine ,But when we go for datafile backup its hanging there from oracle side as not able to give file handle.
RMAN session started with debug it gives only
DBGRPC: ENTERED krmqgns [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: looking for work for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: commands remaining to be executed: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: CMD type=backup cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: 1 STEPstepid=1 cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: no work found for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: EXITED krmqgns with status 1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxpoq - returning rpc_number: 17 with status: STARTED16 for channel sqlbt_ch1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxr - sleeping for 10 seconds [expect.cpp/673]
Is any body seen this type of message from rman.
Thanks
Shirish

OK. Did you miss the second Oracle document?
RMAN Debug For Backup Shows "krmxr: sleeping for x seconds" [ID 458259.1]
Also a ton of information here :
RMAN backup database as copy from file system to ASM diskgroup very slow
and here :
RMAN Error > Please assist!
and here :
RMAN and Amazon Web Services
http://oravdba.blogspot.com/2011_01_01_archive.html
Best Regards
mseberg

Adobe Premiere Pro CS5.5 Family- 'extracting' for 24 hours and I can't cancel it and start again

Hi
I've been trying to download the trial of Adobe Premiere Pro CS5.5 Family for 24 hours now. It downloaded in Adobe Download Assistant fine and the it started 'Extracting'. Its been extracting for 24 hours and the close or pause buttons next to it are not available to press so I can't stop it and try again.
A message half way through did pop up saying 'opening premier pro, verifying...' but then a warning sign came up saying 'the following disk images couldn't be opended. Reason: Invalid Checksum' . Don't know if that has anything to do with it but on Adobe Download Assistant it is still 'Extracting'.
I am working on a year old Macbook Pro with a fast connection to the internet.
Thanks

buenas dias, yo intentado descargar adobe CS5 standart, premium ... pero todos los ficheros se paran en 49°/° y no van mas, no se que hacer, intentado con todos los exploradores de internet . gracias

Extraction for Cube 0PM_C05 requires customizing of table T_PMC05

Hi can any body tell how to solve this error.
Extraction for Cube 0PM_C05 requires customizing of table T_PMC05.
Iam loading data to 0PM_C05 CUBE which has a datasource 0PM_PRM_PLCS_1 which is displaying as errors in source systems.
This is a plant maintenence cube and ia replicated the datasource agian in BI Production and it is active.
Edited by: manukonda anil kumar on Feb 17, 2011 5:45 AM

Hi syed
Take the help of an ABAP person.
There will be same table resembling the name .
So the data needs to be updated in the corresponding table .
When the core people are updating data from different palnts and sites accross.
In my case i haven't moved further.
This is a configuration change form R/3 side where the data had to be fetched in the orrect table .
Regards
Anil .

RMAN can't SET NEWNAME for datafiles added after Level 1

Version: 11.2.0.3
Platform : Solaris 10
I have the most recent Level 0 , Level 1 and post-L1 Archive logs of the source DB.
I am trying restore, recover in a different machine using plain RMAN (not RMAN DUPLICATE) into a new datafile location.
After the Level 1 backup was taken, 2 datafiles (namdata01.dbf, finaldata01.dbf) were added ( this got 'recorded' on the subsequent post-L1 archivelogs )
Before I ran restore and recover, I restored the latest control file from the most recent L1
RMAN> restore controlfile from '/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk' ;Understandably, this control file doesn't have info about the 2 datafiles added after L1 .Wish I could restore control file from archive log :)
So, I cataloged the archive logs as well using CATALOG command.
RMAN> catalog start with '/u01/CATALOGTST/rmanBkpPieces';
using target database control file instead of recovery catalog
searching for all files that match the pattern /u01/CATALOGTST/rmanBkpPieces
List of Files Unknown to the Database
=====================================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc                         -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc                         -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc                          -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
RMAN> EXITDuring Recovery , RMAN applied the archive logs and managed to create the datafiles successfully. But it can't restore the datafiles to the new location specified in the SET NEWNAME location. Luckily , I had created the original path and these 2 datafiles got restored there.
RMAN can't seem enforce SET NEWNAME for datafiles added after Level 1 backup despite cataloging.
Does SET NEWNAME .... thing work only for RESTORE ?
Log of restore and recover
$ cat restore-recover.txt
run
set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
restore database;
switch datafile all;
switch tempfile all;
recover database;
$
$ rman target / cmdfile=restore-recover.txt
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Sep 16 21:27:49 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: SNTCDEV (DBID=2498462290, not open)
RMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }
10>
11>
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 16-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/app/CLONE1/oradata/sntcdev/system01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/app/CLONE1/oradata/sntcdev/users01.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/app/CLONE1/oradata/sntcdev/example01.dbf
channel ORA_DISK_1: restoring datafile 00006 to /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk tag=TAG20120828T234834
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:35
Finished restore at 16-SEP-12
datafile 1 switched to datafile copy
input datafile copy RECID=8 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=10 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=11 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/users01.dbf
datafile 5 switched to datafile copy
input datafile copy RECID=12 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/example01.dbf
datafile 6 switched to datafile copy
input datafile copy RECID=13 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
renamed tempfile 1 to /u01/app/CLONE1/oradata/sntcdev/temp01.dbf in control file
Starting recover at 16-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: /u01/app/CLONE1/oradata/sntcdev/system01.dbf
destination for restore of datafile 00002: /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
destination for restore of datafile 00003: /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
destination for restore of datafile 00004: /u01/app/CLONE1/oradata/sntcdev/users01.dbf
destination for restore of datafile 00005: /u01/app/CLONE1/oradata/sntcdev/example01.dbf
destination for restore of datafile 00006: /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk tag=TAG20120829T000356
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
starting media recovery
archived log for thread 1 with sequence 13 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
archived log for thread 1 with sequence 14 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
archived log for thread 1 with sequence 15 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=12
channel ORA_DISK_1: reading from backup piece /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
channel ORA_DISK_1: piece handle=/u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1 tag=TAG20120829T000454
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/archLogs/arch_1_12_790513173.arc thread=1 sequence=12
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
creating datafile file number=7 name=/u01/app/oradata/sntcdev/namdata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc thread=1 sequence=14
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
creating datafile file number=8 name=/u01/app/oradata/sntcdev/finaldata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
unable to find archived log
archived log thread=1 sequence=16
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/16/2012 21:29:51
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 16 and starting SCN of 1004015
Recovery Manager complete.
$
$
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Sun Sep 16 21:30:04 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from v$datafile;
NAME
/u01/app/CLONE1/oradata/sntcdev/system01.dbf
/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
/u01/app/CLONE1/oradata/sntcdev/users01.dbf
/u01/app/CLONE1/oradata/sntcdev/example01.dbf
/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
/u01/app/oradata/sntcdev/namdata01.dbf           ----------------------> restored to old location ignoring SET NEWNAME ....
/u01/app/oradata/sntcdev/finaldata01.dbf         ----------------------> restored to old location ignoring SET NEWNAME ....
8 rows selected.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ cd /u01/app/oradata/sntcdev            # -----------------------------> the old location
$
$ ls -alrt
total 243924
drwxr-xr-x   3 oracle   oinstall     512 Aug 5 10:55 ..
drwxr-xr-x   2 oracle   oinstall     512 Sep 16 20:59 .
-rw-r-----   1 oracle   oinstall 104865792 Sep 16 21:29 namdata01.dbf
-rw-r-----   1 oracle   oinstall 19931136 Sep 16 21:29 finaldata01.dbf

RMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }RMAN executes the commands in the run block stepwise. In your case, starting from "set newname for database..." and lastly executing "recover database...".
Let me interpret it for you.
1. You restored the controlfile from the L1 backup which does not have any information about the 2 newly added datafiles. You cataloged the backuppieces and the archives to this controlfile, which means that the controlfile would now be aware that the required backups and archives are in this cataloged location.
2. You set newname for database to the desired location, thereby this command is executed restoring the database from the L0 and L1 backups. (These 2 backups do not have any information about the newly added datafiles and hence the 2 files would still not be restored).
3. You execute restore database which restores the files from L0 and L1 backup.
4. Switch datafile all, this renames all the files that were restored in the previous steps to the desired name/location that was mentioned in step 2.
5. Recover database: This is where the archivelogs come into picture. The data in the archives would be created & recovered. The newly added datafiles are now created & recovered but RMAN does not go back to STEP 2 and STEP 4 to re-execute the commands in STEP2 and STEP4 to restore it to the desired location (STEP 2) and Rename it (STEP 4). The files will have to renamed later by moving them manually to the location that you require.
So, RMAN does not execute the SET NEWNAME for datafiles which were added after the backup as the information about these files do not exist in the RMAN backuppieces.

All of a sudden my iphone stopped charging and you can't hear the music through my ihome iH150 when I connect it to the dock, what can I do to fix the ihome? The ihome does turn on and I already checked for dock possible problems and I don't see anything.

all of a sudden my iphone stopped charging and you can't hear the music through my ihome iH150 when I connect it to the dock, what can I do to fix the ihome? The ihome does turn on and I already checked for dock possible problems and I don't see anything wrong.

I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.

Is extract for datafile possible ?

Similar Messages

Maybe you are looking for