Is FC not reading my interlaced material properly?

I kept noticing my 1080i60 footage wasn't looking as good as it did just a day ago. When I step through the video in the viewer or the canvas frame by frame the footage is occasionally truly grainy and then on a lot of frames large colorful pixels are out of place.
For instance if someone has a pink shirt on in the bottom left side of the frame, and I pan left then putting said pink shirt in the bottom right... pink pixels might linger behind and be on someone's forehead in the bottom left. Ok, sorry that that's confusing.
If i play the files back using just quicktime they look normal and fine for interlaced footage.
I'm shooting 1080i60 with the JVC HM100U in MOV mode and my sequence settings: XDCAM EX 1080i60 (35Mb/s VBR)
I've trashed my preferences but any further than that I'm staring at a brick wall..
jer

It could be corrupt render files. You can trash them by going to Tools > Render Manager.
But Final Cut Pro doesn't work well with Long-GOP media like H.264, MPEG-2, XDCAM, etc. You'll experience better results by converting to ProRes.

Similar Messages

CO11N can not post the backflush material properly

Dear Gurus,
When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material". Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
(PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
Thanks in advance for your kindly help.
BRGs
Sivan

Sivan,
This is due to missing entry in a customisation table T158.
Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
Regards,
Prasobh

CD/DVD-drive does not read/write properly

I can not write any dvds or cds because every time a message pops up with an error.
I tried different burning programs with different cd manufacturers and it still does not seem to be a problem on other computers having the same program and using same cds or dvds.
Another thing is that it can not read dvds all the time; same dvd can work once but not again and whenever i try to open a normal cd-r it says blank disc even when they work perfectly on other computers?
can anyone plz help

hey ..ok im on a toshiba laptop SA50-543 usind windows XP home edition..the dvd/cd thing is built in and is a DVD rewritabl CD rewritable multiple recorder.
as for the programs i used for burning..i tried nero,sonic record now and the one im on now is roxio easy media creator
as for the error msg it says:
there was a problem writing to the disc.you can try again by clicking the retry button.you will need another blank disc ready.
further info:
Recording error
Recording errors can occur when a disc contains dirt, fingerprints, or scratches.
If you are getting recording errors:
Try using a new disc.
Try using a different manufacturer??s disc.
Ensure the disc is clean before recording:
Remove all fingerprints, dirt, and dust from the shiny side of your disc using a nonabrasive cloth with a mild, nonabrasive soap solution.
Wipe the disc from the center to the edge.
Dry the disc completely.
tried doing all of that and still not recording..and anyway if it was aproblem with the cds why would they work fine on other laptops?
i dont know which other info you need so let me know if theres anything else
Oh yeah, theres an advanced explanation for the recording error but its all in numbers do you need to know that?
thx

Labview not reading csv file properly.

I'm trying to use the read spreadsheet file vi to read the attached csv.
It does a few things incorrectly:
1) the first cell of the resulting array has ÿþ appended to the front of it, seems like labview is grabbing some special character it shouldn't? (Notepad, notepad++ and excel can all open the file without issue and none show ÿþ or anything like it).
2) It's mistreating the EOL characters as two line feeds, resulting in blank rows between each data row. (Looking at the csv in notepad++ confirms that the lines are ended with a CR and a LF (same as EOL).
3) I'm reading it in as a string, because one of the columns is non-numeric, but then I strip that column out and attempt to convert the remaining string array into a numeric array (this fails). It also fails if I pull out an individual element of the array and attempt to convert it to a number (in both cases using fract/exp string to number), below I have an example of trying to read the 2nd column of the 1st row (index: 0,1) which is formatted as a string: "1.37238168716431" and converting that into a number gives 0 as you can see in the snapshot of the front panel.
Solved!
Go to Solution.
Attachments:
REPORT02.CSV ‏4 KB

I guess the file is in unicode, that doesn't help me very much.
I don't use the "Read from Text File Function" - at least not directly, although it is called in Read from Spreadsheet File. Where is it called, however, right-click doesn't show an option for Convert EOL, instead it's a terminal and it's default is F and as the terminal is disconnected, I'm assuming it's not converting EOL. So it's already "unchecked" in a sense.
No idea how to convert the unicode string to ascii. (no functions show up when i search unicode or ascii in the manager). It displays it just fine in the text box, so I'm not sure why it's able to display it without issue but not read it as a number.
Using Labview 8.6, by the way.

Scanner is not reading properly.

Hi,
I am using Java Scanner to read-in some numbers from a file.
It is skipping some of the inputs randomly and is not reading sequentially..
What may be the issue here?

Hi,
I am pasting my scanner code below,
           File template = null;
            FileReader read = null;
            BufferedReader buffRead = null;
        Scanner scan = null;
        try
            template = new File(templateFile);
            read = new FileReader(template);
            buffRead = new BufferedReader(read);
            String[] values = null;
            String line = buffRead.readLine();//discard the first line
             scan = new Scanner(buffRead);
               JLE = scan.next();
                JTE = scan.next();
                NOSECT = scan.next();
                KIN = scan.next();
            scan.close();
            buffRead.close();Here is my input file data,
Some title here
28 73 28 11 5000 14 52 12 28 0 24 1250 0
1 11 3 3 2 1 0 9 10 0 1 0
3 3 3 9 9 9 1 3 1
0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000
In my code I am removing the first line, i.e title by using buffRead.readLine() and discarding it.
And later I start reading the actual data into some String variables.
I have found that this works sometimes.
Ideally JLE & JTE should be initialised to 28 and 73 respectively (starting numbers in input file).
But many a times JLE takes value 73 and further used variables reads into values in some random pattern.
What is the problem in my code?
regards,
Praveen
Edited by: Praveen_Kumar_Jayaram_1985 on 16/07/2008 20:25

IPhoto 09 not reading Nikon raw files (.nef) properly?

Hey everyone. Over the weekend I upgraded from Leopard to Snow Leopard. Everything seemed to be working correctly until I started using iPhoto. Since the upgrade, I've noticed that photos that I imported from a Nikon D700 seem to look pixelated. I took it to a Genius Bar and the dude helping me was at a loss. He said to try and re-install Snow Leopard, which I did, and that didn't help. I went back and he upgraded me to iPhoto 09...also didn't help. He said he thinks that maybe it's Snow Leopard/iPhoto bug. He said that it's not reading the raw files correctly and seeing them as thumbnails. We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160. Weird. Also of note, both Photoshop and Lightroom view and display all photos correctly.
If anyone has any suggestions or solutions on how to fix this it'd be much appreciated!!

Welcome to the Apple Discussions.
We looked at the photo info of a random photo, and even though it was a large 10MB file (indicative of raw format) its pixels were 160x160.
That means that what you're seeing is the jpeg Preview inside the NEF and not the actual file.
My guess is that the your Camera Raw bundle is damaged.
Go to
HD / System / Library / Core Services / RawCamera.bundle
What version of this do you have?
Regards
TD

My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

My iPhone will
not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

Try resetting your network settings.
Settings>Genenal>Reset>Reset Network Settings.

I have a brandnew 7th gen classic ipad, it does not read in my itunes anymore. i bought it cause apple was suppose to be good, now i am lost as i just want my music, any help. tried the rec. steps to fix it and nothing

let em elaborate more, the unit is less than 5months old, i bought it just for music, i use to have a lot of cds, well it does not read anynore in my computer nor the itunes programe, i reset it, i put it to disk mode, i down loaded the newest itunes program, i want to know how to fix this as i paid apple good money for a product that died after 5months, for real.
this is bad business and i need some help

Does the iPod work okay otherwise apart from not being able to connect with and communicate with iTunes?
Have you tried connecting the iPod to another PC or Mac running iTunes to see if it is properly recognized there?
Is iTunes up to date on your PC? Does it appear in Device Manager when you plug it in? To access Device Manager, click start, right->click on Computer (or My Computer in Windows XP) and choose Manage. When the window opens, select Device Manager in the left hand pane if necessary.
Any unknown devices listed or does the iPod appear anywhere under USB Host Controllers?
B-rock

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

As I can sometimes do, I did not read the directions before delving into LR. Now I find my self with image history in LR on 2 or 3 of my HD's. I would like to now consolidate it on one HD but fear in doing so I will lose the images I have created within

As I can sometimes do, I did not read the directions before delving into LR. Now I find my self with image history in LR on 2 or 3 of my HD's. I would like to now consolidate it on one HD but fear in doing so I will lose the images I have created within LR. Is there a tutorio or some other way to get me back on track with this application?

Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

Combo / Optical Drive detected but not reading CD & DVD

Hi everyone,
Firstly, I apologize if this topic has been covered but I've searched up and down and couldn't find it.
I'm running the following computer:
G4 MDD Dual 1.42Ghz, 1Gb RAM, OS 10.4
My computer has been dormant for about a month now and last night I fired it up with the following problem: _Grey screen with spinning 'loading' icon and it wouldn't get into the desktop_
I managed to successfully boot to the desktop after I did a combination of the following:
1. Reboot in Safe Mode (Shift)
2. Reset NVRAM (Opt + Cmd + O + F)
3. Reset PRAM (Opt + Cmd + P + R)
4. Removed all 3rd party cables
I haven't used the Combo/Optical Drive for about a month now and I decided that maybe I should re-install Tiger. When I inserted the Installer CD, the Combo Drive (1st slot) just ignored it. Initially, Superdrive (2nd slot) also ignores all discs I inserted. After countless restarts, I managed to get the Superdrive to read the G4 Hardware Test CD.
I've done the following:
1. Finder preference is set to not ignore inserted media
2. Tinkered with the Optical drive by unplugging and plugging it back
3. Everything else I could find on the internet regarding troubleshooting it
4. Made sure that the cables are connected properly inside the computer
5. Ran the Apple Hardware Test CD and everything is OK.
6. Checked with the System Profiler and it detects both Optical Drives (1st slot = Combo Drive, 2nd slot = Superdrive).
Now the problem is:
1. Combo Drive does not read any inserted disc (CD & DVD)
2. Superdrive reads but spits them out soon after
3. I can't re-install Tiger
Any advice / suggestions is very much appreciated.

Hi David,
My computer has been dormant for about a month
Have you checked the PRAM Battery, they can cause strange things & last 4+5 years...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Combo Drive does not read any inserted disc (CD & DVD)
Opticals do go out, but 2 at once doesn't seem likely. What happens if you open Disk Utility then insert a Disc?
Have you tried a Cleaner CD in them?

CD/DVD Drive is not reading any discs on Equium A100

My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

Hello,
Here are a few windows articles that could help.
http://support.microsoft.com/kb/891894/en-us
This one might do the trick, if not try this one.
http://support.microsoft.com/kb/826510/en-us
Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

Equium P200 - DVD drive does not read all discs

My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
Does anyone know what the problem is?

Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
bye

Dvd drive does not read dvds

my laptop does not read dvd disks but its able to read some cd disks.
what should i do

Are there any discs that it can read?
Try looking at this article.
What can I do if my CD or DVD drive doesn't work properly?
- Peter

Is FC not reading my interlaced material properly?

Similar Messages

Maybe you are looking for