Is filevault volume-based or drive-based?

If I have multiple volumes ont he boot drive and enable FileVault under Mavericks, will it encrypt all volumes or can I select which ones to encrypt?

Thanks, Kappy, from down in Bellingham, WA. I was going to try FV while installing Yosemite beta on a separate volume, since it would be throwaway, so if anything went wrong due to FV, it wouldn't be a big deal. Apple's kb article did say "drive" but sometimes Apple plays a bit fast and loose with the language.
Guess I'll install unvaulted, since it's my wife's Mac, and mollifying her could get expensive in restaurant costs if there's a problem :-)

Similar Messages

FTE and volume based billing for a call center operations

hi,
we have a call center handling operations only for intercompany customers (means no external customers). And we want to go for a solution based on two business processes. first one is FTE (Full time equivalent) and the second is volume based billing (based on how many tickets received between a time period).
The solution approach will be to create cost centers to track costs and billing through normal SAP sales order.
Can anybody guide me through the process here with some explanation or documentation related to this?
Thank you all

hi,
this is to inform you that,
create a master contract - 1st step.
create a value and a service contract - 2nd step.
link this two low level contracts to master contracts.
different pricing procedures will be there for value and service contracts each.
the process flow of this is :
1. for value contract : MASTER CONTRACT - SALES ORDER - DELIVERY - BILLING.
2. for service contract : MASTER CONTRACT - SALES ORDER - BILLING.
hope this clears your issue.
please let me know if you have any doubts on the same.
balajia

Volume based price adjustments in PO

Hi SAP experts,
Are you aware of any functionality (other than vendor rebates) that allows you to get volume discounts at the vendor level (multiple contracts)? We would like to systematically get volume based price adjustment in the PO based on purchasing volume at the vendor level (crossing multiple contracts).
Thanks and regards, Jose Oyon.

Hi Jose,
Sorry i am not aware about this kind of functionality
Regards,
Manish

Volume Based Price Item CCM 2.0

Hi,
We are trying to upload items with the Volume Based Price Item. So we have/CCM/PRICE[2]#/CCM/AMOUNT, /CCM/PRICE[2]#/CCM/CURRENCY_CODE /CCM/PRICE
[2]#/CCM/LOWER_BOUND and so on. But when we buy a Volume Based Price Item the Price doesnt change according to the quantity.
We were wondering whether the problem is that we need an Aditional Optional Parameter in the Integrated Call Structure as we had done with the Minimum Order Quantity characteristic. Or we have to customize any
other parameter in order to get a different price depending on the quantity that we buy.
THANKS!!!!

Chris,
This morning I also posted another message asking help for Interval for Quantity issue.
When we upload items with the Interval for Quantity characteristic (/CCM/QUANTITY_INTERVAL).Then, when we use the Shopping Tool to buy them we can buy quantities that are not included in the interval. For example if we set 10 as the Quantity Interval and we try
to buy 15 units, we dont get any error.
Any idea? Could you tell us which OCI Field we have to assign to this characteristic. We were also wondering whether the problem is that we need an Aditional OCI (as we had done with the Minimum Order Quantity characteristic). Or whether we need to activate a BAdi.
THANKS in ADVANCED!!!! and THANKS AGAIN FOR YOUR HELP WITH THE VOLUME BASED PRICE ITEMS!!!!

Volume Based Rebate condition entries in MIGO

Hi ,
I configured the Volume Based Rebate condition.
I made condition as copying A001 (Std.) . Conditon class: Expense reimbursement, Cal. Type: Qty. and Accrual.
Assign 26 requirement, Accounting key & accrual key as B02 & B01. Assign GL accounts in OBYC.
When I am doing MIGO
Inventory Dr say 1200-
Rebate Dr 100-
GR/IR Cr 1300
In this case at this point it should hit Inventory account or not. I don't want to hit Inventory. Actually I may or may not take this rebate or may not take full rebate.
How to do this.
Regards

Hello,
It will hit inventory A/c, if you don't want it you should create a new account using Rev A/c Det and assign it.

Volume based route determination

Sir,
can we have volume based ( dimension ) route determination.rather than weight.
Plz can anybody tell me the difference between Weight & Volume in Material.M.R
with an example.
Regards.

Hi,
In standard system it is not possible.But if it is client's requirement , you need to take abapers help to write a program for route determination on the basis of volume.
Volume
Space that the material occupies per unit of volume. The volume refers
to the unit specified in the "Volume unit" field.The volume and its unit always refer to the base unit of measure.
Gross/Net Weight
Gross/Net weight expressed in the unit of weight specified by you in the
Unit of weight field.
The system can use the gross weight at a later stage, depending on what
kind of capacity check you run, to check storage bin capacity for
warehouse management purposes.
Thanks,
Vrajesh

Volume based Purchase agreements

Is there any way to make sure that the Volume based Purchase agreements are enforced in 11i?
E.g Supplier will not sell a product in fraction of a Case (Purchasing UOM) while the requestor's can still order in Each (Requesting UOM) where there is a item-specific relation between Case and Each. To make sure that the Blanket will not release for fraction of Purchaseing UOM and accumulate multiple Requsitions to make one Release more than or equal to the Purchaseing UOM.

In this case you will need to get the validated POS data uploaded into ECC by CRM. this POS data can be used to create claims in ECC which can be used as source documents to accrue and settle later. This is easily achievable in Vistex, standard add on product on top of ECC to handle rebates.

Cannot boot into mountain lion after I have set the start volume to CD drive

Previously I need to boot from CD so I have set the start volume to CD drive by pressing command+option+P+R at the same time and change the start up volume to CD drive.
But right now, it can just start from CD but cannot boot into Mac OS (Mountain Lion) which is installed in the hard disk.
I have tried to press command+option+P+R at teh same time during bootup but seems like right now it doesn't recognize this command. I have tried pressing "X" or "option" or spacebar, etc during bootup but still it tries to boot from CD.
Anyway I can change the start volume back to my internal hard disk?
I have even disassembled my iMac and the CD drive to remove the previous CD as well. Then it still tries to boot from CD drive but now saying the device is not bootable and ask me to insert a bootup disk. I then tried to put the Mountain lion installation DVD (I previously created the installation DVD by following the DIY way from this link http://www.cultofmac.com/180925/how-to-make-a-bootable-disk-or-usb-drive-of-os-x -mountain-lion/) there in the drive but it still said the device is not bootable.
I have disassembled my iMac again to remove the mountain lion disk right now. So the CD drive is now empty. Anyway I can change the start volume back to my internal hard disk?
This is really frustrating .. Hope someone can help.
thanks!

Have you ejected the CD/DVD by holding mouse button on bootup?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

Attach CSV volumes from filter driver during system startup

Hi,
We have written a filter driver to track Hyper-V CSV volumes in order to track the modifications in those volumes for backup purpose. When the Hyper-V host is running, we are able to attach the CSV volumes from the driver without any issues. But during Hyper-V
host startup, our driver failed to attach the csv volumes.
We suspect that filter driver failed to attach CSV volume, since Cluster service was not started at that point of time during the system start up. If we attach the CSV volume later, it works. However, for the continuos tracking we want our driver
to track the modifications from the system startup itself. I believe, we need to load the filter driver once after the csv service is started.
Configurations of filter driver are as following(inf file).
DisplayName = %ServiceName%
Description = %ServiceDescription%
ServiceBinary = %12%\%DriverName%.sys ;%windir%\system32\drivers\
Dependencies = FltMgr
ServiceType = 2 ;SERVICE_FILE_SYSTEM_DRIVER
StartType = 2 ;SERVICE_SYSTEM_START
ErrorControl = 1 ;SERVICE_ERROR_NORMAL
LoadOrderGroup = "FSFilter Activity Monitor"
AddReg = Minispy.AddRegistry
;Instances specific information.
DefaultInstance = "Minispy - Top Instance"
Instance1.Name = "Minispy - Middle Instance"
Instance1.Altitude = "370000"
Instance1.Flags = 0x1 ; Suppress automatic attachments
Instance2.Name = "Minispy - Bottom Instance"
Instance2.Altitude = "361000"
Instance2.Flags = 0x1 ; Suppress automatic attachments
Instance3.Name = "Minispy - Top Instance"
Instance3.Altitude = "385100"
Instance3.Flags = 0x1 ; Suppress automatic attachment
Can you please let us know how to fix this issue? Whether we need to change any configuration in inf file?
For Online backup use StoreGrid. Its really cool

Hi,
We have written a filter driver to track Hyper-V CSV volumes in order to track the modifications in those volumes for backup purpose. When the Hyper-V host is running, we are able to attach the CSV volumes from the driver without any issues. But during Hyper-V
host startup, our driver failed to attach the csv volumes.
We suspect that filter driver failed to attach CSV volume, since Cluster service was not started at that point of time during the system start up. If we attach the CSV volume later, it works. However, for the continuos tracking we want our driver
to track the modifications from the system startup itself. I believe, we need to load the filter driver once after the csv service is started.
Configurations of filter driver are as following(inf file).
DisplayName = %ServiceName%
Description = %ServiceDescription%
ServiceBinary = %12%\%DriverName%.sys ;%windir%\system32\drivers\
Dependencies = FltMgr
ServiceType = 2 ;SERVICE_FILE_SYSTEM_DRIVER
StartType = 2 ;SERVICE_SYSTEM_START
ErrorControl = 1 ;SERVICE_ERROR_NORMAL
LoadOrderGroup = "FSFilter Activity Monitor"
AddReg = Minispy.AddRegistry
;Instances specific information.
DefaultInstance = "Minispy - Top Instance"
Instance1.Name = "Minispy - Middle Instance"
Instance1.Altitude = "370000"
Instance1.Flags = 0x1 ; Suppress automatic attachments
Instance2.Name = "Minispy - Bottom Instance"
Instance2.Altitude = "361000"
Instance2.Flags = 0x1 ; Suppress automatic attachments
Instance3.Name = "Minispy - Top Instance"
Instance3.Altitude = "385100"
Instance3.Flags = 0x1 ; Suppress automatic attachment
Can you please let us know how to fix this issue? Whether we need to change any configuration in inf file?
For Online backup use StoreGrid. Its really cool

Can't create fresh volume on internal drive for reinstall

Daughter's MacBook Pro (Snow Leopard) was initially believed to be damaged by corrupt Library files, particularly iTunes. A clean install would run fine until iTunes was introduced, leading to instability and finally no boot. But not the issue now (I have a good system and data backup, without iTunes, on an external drive.)
The current problem started when, as part of the reinstall, I did an erase of the hard drive, not the volume.
Now, from the Install DVD, can't create a volume on or format the internal drive.
Using Linux Live CDs, I have been able to format a volume on the drive as FAT32. Verify suggests Repair on this, Repair failed.
In detail:
drive selected -- verify disk -- needs to be rpeaired
drive selected -- repair disk -- can't repair this disk
drive selected -- erase disk -- format as mac os ext journ, zero out -- erase failed, posix input/output error
now startup with resetting PRM, able to create Mac HD volume, appears like success, but not there on reboot.
Round and round endlessly.
Any ideas on how to get this drive with a working, formatted volume, ready for a fresh install?

I''m going to run through this again.
Linc Davis, I did reset the PRAM/NVRAM but may not have waited for three chimes.
When I erase an existing partition, am I not creating a new GUID partition table? If not, how do I do that?
Also, I am concerned about -- A Mac OS X installation can be recovered on 'Mac HD'.
I'll hope to not see that.
Lets go.
Command Option P R held down, four chimes
Oops, Linux disk still in.
How do I get this disk out without support for the eject key? Hold down the trackpad while powering up. That's good to know.
Another PRAM/NVRAM reset. (I know.)
Removing the three linux partiions. os3, os2, error on os1. Erased the second time of asking.
Create new OS X partition, Mac HD.
Erase that volume with writing zeros.
This will take a while.

Why does external hard drive show as "volume" below Hard Drive files? LR5|Yosemite 10.10.1

Why is a new folder, i.e. ext. drive, Why is a new folder, i.e. ext. drive, not showing in LR5? New folder shows as "volume" below Hard Drive files. Is this new to Maverik10.10.1? Worked normally in Maverick. showing in LR5? New folder shows as "volume"below Hard Drive files. Is this new to Maverik10.10.1? Worked normally in Maverick.

What happened is finder is as I described. A pale blue Volumes folder,
grayed out which I could not open in Finder. I"ll attach the screen shot of
the LR folders here. I did put in the original post; don't know why it was
not seen.
Ran the command in terminal and it did not change anything. The command WAS
in the terminal screen--- when I check now it is not. see screen shot
BTW, don't have drives C,G,H, J,L. these 'drives' have a few misc folders
in them. not sure when or how they got into the folders left frame
really appreciate the assistance. hope this helps us get closer
neal
On Tue, Jan 13, 2015 at 12:13 PM, robgendreau <[email protected]>

Volume based Price

Hey,
I am learning Variant Configuration
So got this problem
Harddisk size is the character of PC.
I want to connect the Size of HD with Price, how can i use Variant Conditions and Prozedur in config. profile to do this?
like
every 10GB , the price increase 100dollar,
Thanks a lot

already got the answer

FileVault 2 and mapped drives access

I heard that if I'm using Filevault at work, I will no longer have access to the mapped drives and printers. I think this apply to the first generation of FileVault. Is it still the case with FileVault 2?

It looks like the site I linked in my OP is down permanently. I was hoping the owner might be open to helping me with this issue, but that seems unlikely now.
Hopefully someone here on the forums can help me out instead. Essentially: how do I use the noatime option on my boot drive whilst also employing Full Disk Encryption via Filevault 2?
Many thanks

Disk utility & TechTool Pro will not recognize volumes on hard drive

My Powerbook G4 will not start up. This is what happens:
1. Startup chime
2. Hard drive starts to make a constant 'pause-click, pause-click' like a skipping vinyl record sound
3. Then I only get as far as the flashing question mark on screen
I have disconnected all peripherals. I have booted up from install CD and used *Disk Utility* and it does not recognize the hard drive, only the CDR drive. I have booted from the Apple Hardware Test CD. All hardware passes. I have booted off the *TechTool Pro CD* and tried to run the entire suite of diagnositc tests. All hardware passes, all drives pass, but when I get to Volumes and Files, none are recognized. I have tried to get to the *Startup Manager*, but I can't get to that point either, only as far as the flashing question mark. I would like to be able to salvage data from the harddrive, so haven't tried to reinstall software and OS.
It seems to me that the hard drive is probably dead and I probably need to replace it, but is there any hope to recover data from the old hard drive
Any suggestions on what else I might try or on confirming my tentative diagnosis, would be greatly appreciated. Thanks

Thanks for the quick reply Tom,
I mostly save my work related documents on external flash drives or zip drive media, so my most important data for the most part is backed up. However, I had gotten a bit unattentive with personal interest stuff, like photos, music etc. I'll probably think of something important months from now and realize it was only on that drive, but for now I am most concerned about my downloaded emails and email addressbook. I never thought to back those up. Makes me want to stop running Thunderbird and keep all my emails online. Anyway I have some recent business inquiry emails from new contacts that are stuck on that drive. Can't recall the exact name of the organization this person was with. Aghh.
Think there is any use trying one of those data recovery programs to see if I could extract some information from the disk?
I am realizing that I will probably need a new hard drive to get the computer running . A friend's dad who is a computer teacher (though mostly PC but has kids with Macs so he's been working with Macs a bit and learning) mentioned the possibility of putting in a new hard drive as the start up drive then installing the old one as a secondary hard drive so I can try to access my data that way. Think that sounds like a feasible option to try? Perhaps I could run the recovery within that configuration. Worth a try? Pointless?
I appreciate any words of wisdom or commiseration.
Thanks,
Applangel

Is filevault volume-based or drive-based?

Similar Messages

Maybe you are looking for