Is Final Cut Pro 6 compatable with OS X Lion?

I was thinking about upgrading my Macbook Pro to OS X Lion (I currently have 10.6.8), but have read in the reviews that there are some issues with older programs not being able to run. I use Final Cut Pro (6.0.4) very frequently, and would hate to have it be rendered useless. Does anyone know if this version of FCP will run on Lion?

apparently not: https://discussions.apple.com/thread/3252681?start=0&tstart=0

Similar Messages

  • Final Cut Pro Project compatibility with FC Express

    Hello, I have the latest universal version of Final Cut Pro. If I edit a project can someone with Final Cut Express open it and work on it?
    THanks,
    Neobe

    No -- nothing I can think of will work...
    Can go the other way... but not down to FCE.
    CaptM

  • Can Final Cut Pro X work with OS X Lion

    I am going to buy a IMac all-in-one which use os x lion and would like to know if Final Cut Pro X will work with it???

    Yes.

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • Will the new final cut pro x work with my Final cut pro version 6.0.6 data

    will the new final cut pro x work with my Final cut pro version 6.0.6 data

    Thanks Tom.
    So I will need  upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
    Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
    Roger

  • Is final cut pro 6 compatible with snow leopard?

    Is final cut pro 6 compatible with snow leopard? I don't want to upgrade the OS if I lose FCP.

    DO NOT MAKE AN IRREVERSIBLE DECISION.   You should clone your startup drive so you can quickly return your system to it's previous state if there's a problem.  Although Nick is always right, do you really want to trust him (or me for that matter). 
    https://discussions.apple.com/docs/DOC-2494

  • Is Final Cut Pro 3 compatible with MAC OS 10.4?

    Is Final Cut Pro 3 compatible with MAC OS 10.4?
    867x2 Mirror Door G4   Mac OS X (10.4)  

    re:FCP3
    Some people purchase FCP3 and then the upgrade to FCP5. It is less expensive than purchasing FCP5 as a new install. You may be able to find a copy of FCP4.5HD out there as well for a low price.
    That being said, while some use FCP3 (or FCP4.5) with 10.4, 10.4.x and QT7.x. will be happiest with FCP5.
    re: burning.
    Once the file is exported as a quicktime DV file, iMovie does not care about the origin. It should work just fine. DVDSP gives you much more control and greater flexability in setting up menus, looks, operation etc, but is not required.
    Good luck.
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • Will Final Cut Pro X work with Yosemite

    Will Final Cut Pro X work with Yosemite?

    me too version 10.8. It would have been nice to know yosemite was going to crap out my primary video editing software! I use this for my video editing for my business video production and it would have been nice to know ahead of time or here's a crazy idea how about the software developers who are making millions off final cut pro sales release a fix BEFORE apple roles out yosemite for free. I don't have time to chase down every blog in the world to see issues etc. The reason I bought a mac is I just need it to work so I can work on my business.

  • Burning a Final cut Pro X Project with DVD Studio Pro

    Hi,
    A project edited in Final Cut Pro X and Compressed with Compressor 4, can you then burn to disc with DVD Studio Pro?
    I have DVD Studio Pro on my system but when I burn the project to disc using DVD Studio Pro it crashes all the time.
    I'm wondering if DVD Studio Pro is not compatable with a 64 bit system?
    Advise is appreacated.
    Barry

    Thanks Tony that did it, I was using Burn but when I went to Build/Format the disc burned as it should, thanks
    Barry

  • Will Final Cut Pro 7 work with Mountain Lion?

    Running Mac OS X ver 10.6.8 and would like to upgrade to Mountain Lion. Would like to know if Mountain Lion is compatible with Final Cut Pro Studio featuring FCP 7?

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • Final cut pro not working with Yosemite

    I yesterday installed Yosemite and the previous version of Final Cut Pro does not work with it.  When I try to install the latest version of Final Cut Pro from the purchased tab in the app store, I get the message:  "Final Cut can't be installed on this computer because it requires at least 4 GB of memory".  When I go to the storage tab in "About This Mac", it shows that I have 154.49 GB free of 319.21 GB.  Can someone help?  Many thanks. 

    It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo.  I had been using Final Cut Pro without any problems right until I upgraded to Yosemite.  I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating. 

  • Final Cut Pro 5, problems with switching between HDV and DV

    I recorded a movie in HDV 1080i50 and captured it into Final Cut Pro 5. I think the capture was done correctly (but the video was captured by another person), with Easy Setup on HDV 1080i50 and the camera set on HDV 1080i.
    The sequence in which I edited the movie had its settings on DV PAl which was necesary for me to export the video for DVD. Of course I had to render the clips many times in the DV mode. Later I wanted to export the movie to tape in the original HDV format so I changed the sequence settings to HDV 1080i50.
    There I encountered a problem. The frame became very small while the aspect ratio was huge (1920x1080) and it didn´t matter though I copied the clips to a new sequence (with its settings on HDV).
    Does anybody know why this occurres? Is it possible that the frame size distorts if I change the sequence settings from HDV to DV and again to HDV? Because I have also tried to put the original audio/video files into a new HDV sequence and there the frames dimensions are correct.
    Best regards - Einar Hjartarson
    www.gagnvirkni.is

    I think your workflow is completely wrong.
    Edit in whatever codec the footage is, then export via
    Compressor > Advanced Format Conversion
    It's that simple.
    You can't just change your sequence settings to whatever you want the footage to be.
    Andy

  • Final cut pro 5.0 with intel processor

    Hello there, I have an offer to purchase final cut pro 5.0 and was wondering if it is compatible with my intel processor imac w/ snow leopard? I have searched the forum, but haven't found this specific question answered. Can it be made to work with an upgrade and if so, which specific one?
    thanks for all your help,
    Paul

    Apple trivia....
    Mxxxx are the numbers used when Stores/resellers order Apple products. Not to be confused with model numbers or model identifiers.
    Example: the current Mac Pro has the order # MC250 (4 Core) and MC561 (8 Core)
    Model # for both is A1289, model ID is MacPro 5,1.
    Order numbers (Mxxxx) and model numbers (Axxxx) never get repeated. Each revision or version is always unique. ID # might be continued across product refreshes of hardware but rarely over more than two generations.
    The A suffix at the end of an order number is the country code for USA (I think). It differentiates the local keyboard layout on a computer or in the case of software, the accompanying documentation.
    Z is used for international products. My Pro has a D suffix because it was bought in Germany.
    So now you know!
    Message was edited by: Nick Holmes with a little help from [Mactracker|http://www.mactracker.ca>

  • Installation of Final Cut Pro Version 2013 with OSX 10.7.5

    In 2013 I bought Final Cut Pro for my MacBook (version 2007 with OSX 10.7.5). Meanwhile I had to reinstall the hard drive and set-up the MacBook again. As there is now only the latest version available in the AppStore, I cannot install this version 10.1.4 as it is not compatible with my 10.7.5. OSX. Is there any chance to get the version 2013 (June) to install it again? Thanks for support!

    Also take a look at this doc.
    You could install a more recent OS on a separate drive or partition and run a dual boot system.
    Russ

  • Will Final Cut Pro X work with mavericks

    Was thinking about upgrading to Mavericks on my Mac Book Pro Retina but wanted to know, 1) will it use a lot more storage and 2) will it work with Final Cut Pro X?

    When I was running the supposed GM of Mavericks just before it was released, FCPX wouldn't let me import ANYthing into it. When the import window would open it wouldn't let me choose anything. FCPX became useless and I would have to force quit it. So, I'm a little hesitant to upgrade to it today.

Maybe you are looking for

  • Can't connect to web despite full-strength connection on wifi

    Alright, I've scowered the internet and read several other topics, but none of the suggestions presented there helped fix my problem, so I'm throwing this at the support discussions. Thanks in advance for your help/suggestions/advice! My wife and I l

  • How to open a save file dialog box in form

    hi all I have prob in form desing , i have open the save file dialog box , how to open a save dialog box and path of the select file to save in disk help thx

  • Path in a file in Illu 18.1.01 not avilabel, if I open it in CS2 all is correct

    A path in a file in Illu 18.1.01 not availabel, if I open it in CS2 all is correct. In both Win and Mac 18.1 versions I can´t change the path, the path only is shown. When I opend it first from an eps file the path was shown and choosable, after savi

  • HELP PLEASE: DVD Movie Won't Play on Computer nor Transfer

    Hi! I burned a VHS taped program to a DVD on a Sony DVD burner and I made sure that I finalized the DVD. When I checked it while it was still in the player it did play on the TV very well but the DVD will not play on the computer nor will any of the

  • Matching Machine Serial Number to a Asset Tag

    Is there a way to take the machine Serial Number (From System Profiler possiblely) and match it to a file that has Serial Numbers and Asset Tags from a inventory database? 1. Define Serial Number through System Profiler 2. Scan File with Serial Numbe