Is "Find your iPhone" the only way to locate a stolen iPod?
Was just wondering was it the only way to locate iPod.
Yes, ther is another way, the old fashioned way, like if you lost a wallet or purse.
Similar Messages
-
What is the best way to track a stolen ipod touch 4th generation if the locations services are off
What is the best way to tracker a stolen ipod touch 4th generation it the locations services are off
you will have to use the old fashioned way, like if you lost a wallet or purse.
-
My ipad has been locking up and shutting down when I'm using the internet. Went to do upgrade 6 and Ipad froze wanting me to plug into itunes. I hooked ipap up to my laptop to do upgrade, but the ipap was still frozen, I had to restore to factory settings, unfortunately I have lost my pictures. Is there anyway to get the pictures back?
Pad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
How to find your iphone when it is turned off?
Can anyone help me find my lost iphone, its not on?
Then the only way to locate it is to physically look for it.
Good luck. -
When we miss a call, the "Slide to Unlock" doesn't respond to touch. The only way out is to have someone call your iphone and then "Slide to Answer" will respond and once u end the call it will start responding to "Slide to Unlock" this started happening after upgrading to IOS 7.
iphone 4S IOS 7.0.3.In your first post you mention you have done a reset and a restore. Those are the last two processes in the user troubleshooting. If those do not work, then the last thing is to go to the Genius Bar. You say you went to Apple and they opened the phone and re-seated the connectors? That sounds unusual, because if there was a hardware issue,they would replace the hardware. You say you cannot get a replacement, is that because you are out of warranty? An out of warranty replacement is only $199 plus tax. It seems to me since you mention the fact you need to press hard to get the screen to react there is something going on with the hardware. If this problem has been going on for over a year, have you been reporting this to Apple. You say you cannot get a replacement and you are on the second phone, I wonder why they are denying you a replacement. Is there something you are not telling us??
-
how do u block someone from sending imessages and txt and calling ur phone when they have a iphone also. I have been told the only way is to turn off my imessages and recieve regular text messages.. is there another way?? i have searched for apps and cant find one. neeed help!!!
There are no apps and that is not a feature of iOS.
iMessages are handled by Apple's own system, and there is no way to block a specific sender.
SMS messages and voice calls are handled by your cell service provider, so you need to ask them what blocking (if any) features they offer. If the texts are just spam, you should be able to report them to your carrier and they can block that sender. Other blocking options will vary from carrier to carrier, so call yours and ask them what they can do. -
When I sync my iphone I get a popup that says 'ABAssistantService quit unexpectedly'. I can 'ignore', 'Report' or 'Reopen'. The popup comes right back after a few seconds no matter which option I choose. The only way to make it stop is to reboot the computer. Any ideas?
iTunes places the .ipsw file here:
OSX:
~/Library/iTunes/iPhone Software Updates
XP:
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
7 &Vista:
C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
Find and delete any and all .ipsw files on your computer. There should only be one, but delete all that you find. Next, disable ALL firewalls & security software on your computer. Connect your phone, iTunes running & restore from backup. Follow this by syncing your content back to your phone.
This will force iTunes to re-download the .ipsw file, as I suspect yours is corrupt. -
I was updating my iPhone 4 to iOS 7 today and before I did, I backed my phone up into iCloud. Then while it was updating an error occured and now itunes is telling me the only way to power up my phone is to restore the whole device. Is it possible to power up my phone without restoring the whole device? Or without loosing everything?
Not if the error says to restore in iTunes. You should have made a backup before the update, so you should be able to restore to that backup. But with the device in recovery mode as it is, there is no way to backup anything at this time. If you did not make a backup before updating then you can only restore to your latest backup, whenever that was. If no backup at all, then you will have to restore the device as new, losing everything.
-
Is the only way to stop the iphone vibrating while on a call to set it to silent?
Is the only way to stop the iphone vibrating into your ear while on a call to set it to silent?
Many thanks.Yes.
-
how do i recover my lost iphone 4 when i only had the "find my iphone" app, how do i locate it, how do i recover my lost iphone 4 when i only had the "find my iphone" app, how do i locate it
As long as you enabled it when you first activated your Iphone, it's pretty straightforward. Using any computer, go to icloud.com. Sign in with your Apple ID. A screen will come up with a map showing the general location of your phone. If you have a friend with an iphone and are logged in using Safari, when you get close, you can tell your iphone to make a sound. Good luck.
-
Is the wifi the only way to connecto to internet in the Iphone 3G?
is the wifi the only way to connecto to internet in the Iphone 3G?
No, you can connect via cellular, however you have to have a data plan for your iPhone. You may need to check with your carrier to make sure that is taken care of.
-
I setup my 4 digit lock & now cannot login (thought it was what I wrote but not working; I have not synched my computer w/my Iphone in a
long time- is restoring to factory settings the ONLY way to unlock this? (arrggghh). Any help is greatly appreciated.Yes, that's correct.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
If you have forgotten your passcode lock is the only way to unlock the phone to connect to the original computer? Is there no way to connect to itunes? HELP!
Restoring as a new device means you will loose everything. You can restore from a backup, but if that backup includes the same passcode you cannot remember now, then it will just put it back in place and you will be right back where you are. If the backup does NOT include the passcode currently on the device, you can restore from that backup.
If restoring as new, you will loose any pictures in camera roll not already saved somewhere else (like your computer). You will loose any contacts also not already saved somewhere else.
Once you've restored the iPhone though, you can re-sync the contacts and other content from your backup copies on your computer. iTunes and App store content can always be redownloaded. -
My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.
Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone. -
i want them gone. the only way i found to do this is by deleating the ichat.plist but i can't find it anywhere. i have gone through all the plist in preferences and its not there i want these convos gone
Hi,
Go to the Finder's Go Menu > Go to Folder and type in ~/Library/Preferences
This will open the Preferences in the Home Folder's Library.
In Lion this Library is Hidden and you cannot Click you way there.
Delete the com.apple.ichat.plist and it's associated .lockfile (Drag to Trash>
Restart iChat.
I am presuming Lion from what you say despite your specs saying Snow Leopard.
10:52 PM Wednesday; September 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
Message has error status at outbound side File To Idoc Scenario
hi , In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side". When i go to IDX5 and and select my idoc and click on Transaction Id
-
Hi Friends, I'm getting problem in reading only 100 records from the application server using the READ DATASET statement. The file on the application server may have 8000 records but i wanted to get only 100 records and process them. Then i wanted to
-
HDCam 1080i to ???? for PC and still look good compressed?
Client has asked for 1280x720 compressed in a codec that a PC can read via After Effects. Eventually they want to go to Flash. Their source is HDCam 1080i. I've captured via FCP 6/AJA Kona LHe in Apple 10bit 4:2:2 Uncompressed, then let Compressor 3.
-
Hi, I have build an infoset on ldb PCH and have enabled object type 'S'. The requirement is to get IT1005 and IT0008 fields in one query. The infotypes selected includes the PA infotypes 0001, 0002, 0007 & 0008. While building a query i get data from
-
I would like to cancel my subscription asap thanks!
I would like to cancel my subscription ASAP thanks