Is Firefox Beta affected in the same way as the latset edition of Firefox 16

Is it vunrable to exploits?

By the end of day today there will be a Firefox 16.0.1 which fixes the security issue. Please note that this vulnerability isn't being exploited in the wild, so the real threat is very little.

Similar Messages

Does the iPad 2 pass through TV the same way that the iPhone 4s does ?

Does the iPad 2 pass through TV the same way that the iPhone 4s does ? I have an Arcam rCube dock which allows the tv pass through from the iPhone 4s and I was wondering if the iPad 2 will do the same if I buy a dock extender and what should I check for in a dock extender ?

No - that feature does not exist on the iPad2 and I know of no plans - nor would anyone else here - for that feature to be added with a software update in the future.

Can't iPhone have Thai keyboard the same way as the PC keyboard?

I been using iPhone since 3GS, 4, and now 4S.
I been using WhatsApp communicating with my friend and family a lot.
Since I'm from Thailand, I use Thai keyboard in WhatsApp most of the time.
iPhone Thai keyboard is very difficult to type.
Can't iPhone have Thai keyboard the same way as the PC keyboard?
iPad already has it. Why can't iPhone has it?
Many Thai people feel the same way as I am.
Many iPhone user in Thailand jailbreak their iPhone because they want the keyboard the same way as PC keyboard.
All iPhone user must use the keyboard everyday to communicate.
Imangine that Thai people have to use the keyboard everyday and having a hard time using it.
Please consider giving Thai people the keyboard that we can use with ease.

To turn on Thai keyboardin your iPhone with iOS4.0.2++, follow the steps below.
1. Go to settings
2. Select General
3. Select Keyboard
4. Select International Keyboards
5. Select Add Keyboard...
6. Search for Thai
This should add Thai keyboard to your iPhone.
In order to use Thai keyboard during text SMS/MMS,
Tap and hold on the lower left where there is a "Globe" like icon. You should see a small window with a selection of keyboards available. Without letting go, run you finger (still holding to the globe like icon) to Thai and you should be able to start typing in Thai.

How to get pictures organised the same way on the iPad as they are on the PC?

When syncing pictures from my PC to my iPad the same albums are shown on my iPad as on my PC, but the pictures seems to be organised in random order within the albums, i.e. they are not organised the same way as on my PC. I've named all pictures on my PC and organised them based on name. Does anyone know how I can get iTunes/the iPad to sync the pictures in the same order?
Best regards,
Cecilie

Are you syncing the photos by selecting folders or by selecting a photo app that you have on your computer ? If you are syncing folders then they will be sorted by their 'date modified' fields (I assume that still applies on iOS 8), not by their filenames - so you will need to amend their 'modified' fields to be in the order that you want them to show in.
Or there are third-party photo management apps such as Photo Manager Pro (help pages) - you can copy photos to/from that app and your computer, and you can change the sort order of albums within the app.

JTable - Resize rows the same way as the columns

Hi!
I have run into a very frustrating problem and have tried to solve this for many hours but can't come up with a good solution. If there is anyone that can help me on the right track I will be very grateful!
When I'm using a JTable it provides good "graphical" functionality to handle resize of colums, but when it comes to resize rows it is not available.
I have found a solution for the row height adjustment in the following post: [http://forums.sun.com/thread.jspa?forumID=257&threadID=453665]
That solution only partially work in my case because of the following:
The JTable exists inside a JInternalFrame and the JTable should not be able to get bigger then the actual size of the InternalFrame it is put in (so no scrollbar).
The problem with the solution above is that the JTable total height will also expand when a row is resized (contrary to what happens when the columns are resized), ending up with a JTable that is bigger then the InternalFrame.
So my question is:
Is it possible to provide the same ("graphical") resize functionality for rows as for columns in a JTable? Or any row resize functionality that prevent the JTable from getting bigger then the container it is placed in?
Thanks for your time!
Best regards,
Marcus

Thanks for the fast answer!
Yes, that would solve the height expanding problem. Thanks!
It would be even better though if the row resize functionality would behave the same as the column resize (for consistency). For example: If a row is resized the other rows will get smaller so they all fit into the InternalFrame.
It has to be some easy way to do this. I have started on a solution with component listeners etc. (to track resize) but it is quite hard to get it right and I keep getting the feeling I reinventing the wheel all over again:(
Any ideas out there?

Why won't using 'Insert' work the same way on the Photos page?

Because my images I edited in Photoshop don't appear in my iphoto Library or in the 'media' section (I have no idea why!!), I have to go to the toolbar at top, and use "Insert....Choose....pictures....etc" and insert the pics that way. But it won't insert into the photo grid and you can't add frames, and you can't click on it to enlarge. I guess I don't understand why you can 'drag' the pix in from the media section and it works fine, but when you manually insert the pics, it's just a plain pic, nothing else.
Is there anything I can do?
Thanks
Kim

Rather than use Insert, try dragging your edited images from their location on your HD into the photo grid.
[ Visit here for iWeb Tips, Tricks and Hacks ]

Writing user defined function the same way as the oracle functions

Hi Guys,
In one of the interviews , I have attended the guy asked me to write a user defined function which will take the column name and list all the values .
For example
Table Name:Employees
Column Name: Employee_Name
Employee_name
Scott
Ivgun
Jack
Shane
The query should be in this fromat
SELECT col_agg(Employee_name) emp_name from Employees;
The output shoulld be
Emp_names
scott,ivgun,jack,shane
Please let me know if this is possible
Any suggestions will be highly appreciated.
Thanks,
Ranjan

You could certainly write a user defined aggregate function if you like...
e.g. this function will aggregate strings into a CLOB...
create or replace type clobagg_type as object
text clob,
static function ODCIAggregateInitialize(sctx in out clobagg_type) return number,
member function ODCIAggregateIterate(self in out clobagg_type, value in clob) return number,
member function ODCIAggregateTerminate(self in clobagg_type, returnvalue out clob, flags in number) return number,
member function ODCIAggregateMerge(self in out clobagg_type, ctx2 in clobagg_type) return number
create or replace type body clobagg_type is
static function ODCIAggregateInitialize(sctx in out clobagg_type) return number is
begin
    sctx := clobagg_type(null) ;
    return ODCIConst.Success ;
end;
member function ODCIAggregateIterate(self in out clobagg_type, value in clob) return number is
begin
    self.text := self.text || value ;
    return ODCIConst.Success;
end;
member function ODCIAggregateTerminate(self in clobagg_type, returnvalue out clob, flags in number) return number is
begin
    returnValue := self.text;
    return ODCIConst.Success;
end;
member function ODCIAggregateMerge(self in out clobagg_type, ctx2 in clobagg_type) return number is
begin
    self.text := self.text || ctx2.text;
    return ODCIConst.Success;
end;
end;
create or replace function clobagg(input clob) return clob
deterministic
parallel_enable
aggregate using clobagg_type;
SQL> select trim(',' from clobagg(ename||',')) as enames from emp;
ENAMES
SMITH,ALLEN,WARD,JONES,MARTIN,BLAKE,CLARK,SCOTT,KING,TURNER,ADAMS,JAMES,FORD,MILLER
SQL> ed
Wrote file afiedt.buf
1 with t as
2    (select 'PFL' c1, 0 c2,110 c3 from dual union all
3     select 'LHL', 0 ,111 from dual union all
4     select 'PHL', 1, 111 from dual union all
5     select 'CHL', 2, 111 from dual union all
6     select 'DHL', 0, 112 from dual union all
7     select 'VHL', 1, 112 from dual union all
8     select 'CPHL', 0, 114 from dual union all
9     select 'WDCL', 1, 114 from dual union all
10     select 'AHL' ,2 ,114 from dual union all
11     select 'NFDL', 3, 114 from dual)
12 --
13 -- end of test data
14 --
15 select trim(clobagg(c1||' ')) as c1, c3
16 from (select * from t order by c3, c2)
17 group by c3
18* order by c3
SQL> /
C1                                     C3
PFL                                   110
LHL CHL PHL                           111
DHL VHL                               112
CPHL AHL NFDL WDCL                    114Ok, it's more than just a function as it uses an object type linking into the internals of the ODCI... but it does what you ask. :)

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Suddenly I cant connect to my firefox (get at Google 404 error message); I tried reinstalling firefox and the same thing happened; so how do reinstall firefox?

As you can see, this problem is evolving. Now, I can download Firefox (thanks to Amistree -- sorry, I know that spelling is wrong) but once I close Firefox, I cannot re-open it. I get that same Google 404 error message. So I need to keep downloading Firefox. I will say that, once downloaded, I do have all my tabs, ext. still in place. This is so weird!
Thanks for any help anyone can suggest.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

I have 2 iphones and 1 ipod touch. how do i use the same itunes on the home computer for each? all we use the home computer for is one big music database.

i have 2 iphones and 1 ipod touch. i want to use the same itunes music database for each device. we did this before with our older ipods, by just sycing what was checked. does this work the same way with the new devices?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
http://support.apple.com/kb/HT1495

Yahoo is my homepage, when I downloaded Firefox 4 my email was on the right in place of page options and I liked it better, but now it has gone back to the old way on the left, why is this

Yahoo is my homepage, I have been using Firefox for years but when I downloaded Firefox 4 my yahoo email was on the right in place of page options and I liked it better, it was there for a while but now it has gone back to the old way on the left, why is this

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
This is very irritating !! If I wanted Yahoo I would ask for it !

How to get BufferedImage to treat zero in the same way as MemoryImageSource

Hi!
I was wondering if there is a way for BufferedImage to treat the value zero, i.e. 0, the same way as MemoryImageSource. After some testing I have found out that if the integer array that is used by MemoryImageSource contains a zero pixel value, it is treated as no value and the given background color to drawImage is used. When using BufferedImage, with type TYPE_INT_RGB, the zero value is treated as black.
The problem is that I need to replace my MemoryImageSource instance with a BufferedImage to handle dynamic update better and I do not want to redesign the whole pixel array. Is there a way to get BufferedImage to treat 0 value pixels the same way as MemoryImageSource, i.e. treat them as no value and use the background color.
Would really appreciate some help!
Best regards
Lars

Have you tried using an ARGB image type instead of RGB? Then you can set the alpha of pixels you want to be transparent to zero.

Is there a way of making my iPod's "cover flow" sort in the same way the software can . Artist -- Album by Year . It only seems to do Artist -- by Alphabetical Album . I want it look like it does on the PC .

Is there a way to make the "cover flow" on the iPod match the sort style that I use on the software . I go with Artist -- Album by Release Year . But the ipod seems to only do Artist -- Alphabetical by Album , and then there are a handful of albums oddly out of place . Can it be done ?

Ottonomy, here's what to do.
Connect your iPhone to your computer and open the iPhone's playlist in an iTunes window. Copy/Paste the entire playlist into a new(!) playlist in iTunes, not on your iPhone. Then resort the playlist. After you sort it, Copy/Paste it to a new(!) playlist on your iPhone. Now delete the old playlist on your iPhone and rename the new playlist the name you want it to be (probably the same name as the old playlist).
The downside to this method is that you have to do it every time you add a song to the playlist. Unfortunately, I don't think there's another way.

Is Firefox Beta affected in the same way as the latset edition of Firefox 16

Similar Messages

Maybe you are looking for