Is Firefox compatabile with Win7 Ultimate 64 bit OS

I am currently using Windows 7 Ultimate - a 64 bit OS and want to know if Firefox is compatabile with this.

Yes, use the 32 bit released version of Firefox that you will get automatically, not the 64 bit version that you would have to search for.
To download Firefox go to http://www.mozilla.com

Similar Messages

Content Encoding Error - Firefox 8.0 - Win7 Ultimate 64 Bit

Content Encoding Error - Firefox 8.0 - Win7 Ultimate 64 Bit
I'm completely hooked on Firefox, so I only know how to use it, however I was forced to switch to IE, because I have a virus any that only leaves me open these two.
But in Firefox 8.0 recently updated pages take 4 or 5 times longer to open and when they open is full of errors. Clear the cache only solves by 1 min! lol

You can get a "Corrupted Content Error" error if there are multiple location redirects send via the HTTP response headers or there are other errors in the response headers.
*http://www.mozilla.org/security/announce/2011/mfsa2011-39.html
*[https://bugzilla.mozilla.org/show_bug.cgi?id=681140 bug 681140] - Corrupted Content error due to multiple Content-Disposition header field instances

Is DAMO has issues with win7 64 bit

Hello,
we are impelmenting DAMO for our users, it works fine with Win XP/7 32 bit, but got some issue with win7 64 bit, its not creating MAPI profile, at the end of installation it shows
error, "Failed to create a new MAPI profile. ", After that it displays "Setup encountered an error
and failed to create a new MAPI profile. You will need to reinstall IBM Lotus Domino Access for Microsoft Outlook."
please pass solution if you have any...
Thanks!
vipul

Do you have a virus scanner, can you exclude .nsf files from scanning.
When installing the damo client software do not put in the normal Program files area as I believe windows 7 will not allow permissions to be changed without asking every time, so tis could be causing issues with temp files etc at setup.
When setting up user profile it will ask where to save the user files, change from default profile area to some other created area of the disk you know you have access to, suggest making a path c:\damo\username\
Also install lotus notes normal client and make sure your ID is ok using basic client.
Thanks.
Tony Chen
TechNet Community Support

Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

Read A fix via Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

Memory Leak Issue With Win7 64 bit and Youtube.

I have a Win7 64 bit using IE9 with version 11.4.402.265 installed. 4 MB installed.
Whenever I go to Youtube or Liveleak, and watch videos, over time it uses up to 4gigs of my memory! Even if I close the window, it does not free up the memory until I Ctrl/Alt/Delete and shut down the window(s).
I normally only keep open 1-2 windows. Google toolbar is about the only thing installed. I can open 5 and more tabs, but as long as the site does not use flash, I don't have issues and each window usually uses under 200k memory watching them in task manager.
When I go to open and watch a youtube video, it slowly climbs to 200k and within an hour, I can be at 2 gigs or more memory and up to 4 gigs within 2 hours (or sometimes much sooner). Closing the window does not release the memory until I end task on it and then after a minute or so, the memory seems to clear and everything is back to normal.
I searched the forums and seems lots of users, report memory leaks, some using yahoo toolbar installed, which is not my case. I do use yahoo as my e-mail address, no idea if that is related or not. I had the same issue when I had the prior Flash version installed, this has been going on for months. Right now having only this window open, using 129, 192 memory. If I open one more window (using the 64 or 32 bit browser) and start youtube, the memory in that window keeps climbing about 50-100kb a second, so it adds up quickly. I have kaspersky running in the background and that is about it other then my nvida driver setup.
Really frustrating that so many people here and across the internet have reported this. I did have IE8 a few weeks ago and still had the same issue, upgraded to IE9 to see if that helped.
Interesting side note, if I pause a video, it slows way down on the memory leak, but still rises at a slower pace. I don't know if this is an IE thing or Flash. I have had this setup since 2009 and don't recall having issues with IE7. I use Youtube so much as a teaching instrument as a music teacher, so constantly have lessons going on it.
Thanks and hope someone has come up with something. I also build computers and have done some programming, so I could modify a file if needed with clear instructions.

This could be similar to bug https://bugbase.adobe.com/index.cfm?event=bug&id=3334814

Z22 sync with Win7 64 bit via IR: error that port is in use by another application.

I've read the solution for syncing a Z22 with Win7/Vista 64-bit. I have a USB-to-IrDA adapter that is working. I've set Hotsync on both the Z22 and PC to Infrared. When I start to sync, I get a message on the Z22: "Unable to initiate HotSync operation because the port is in use by another application". I can beam files from the Z22 to the PC with no problem. I'm not aware of any other app using the port. (When I put the Z22 in range of the IR adapter, the "send files" window comes up on the PC. I've tried syncing with this window open and closed, and the error's the same either way.) Any suggestions?
Post relates to: Palm Z22
Message Edited by jpendle on 12-01-2009 01:27 PM

We followed a suggestion from another post. And I wanted to add it here since it helped us after a lot of struggling. We connected/synced a Z22 to windows 7 64 bit PC via a IR adapter Startech USB2IRX. Using a driver downloaded directly from their website, not the CD that comes with the adapter, driver installation was smooth. The installation application installed it without problems. (I also tried an adapter from cables unlimited IrDA wireless bridge. Then I had to install the drivers for windows vista 64bit manually onto my win 7 64 bit machine.) After driver installation, we were getting an error indicating that the port is in use by another application. And we were stuck until I read a post which suggests a soft-reset on the palm. After that it was smooth sailing.
Palm really is going the way of the dinosaur-otherwise they would have had a usb driver for windows 7 64 at this point. But it you need to as I did you should be able to sync your device.

Itunes does not recognise ipad 2 with win7 64 bit but the computer recognises the ipad 2 as a camera. Works OK with win7 32 bit.

I have tried to sync both ipod and ipad2 (new) with itunes running on win 7 64 bit. I have all latest versions installed on all machines.
The ipod and ipad are just not recognised in itunes.
I have an old win7 32 bit system on the same machine and everything works perfectly.
Any ideas welcome.

http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/.
This was the answer to all my problems, once i updated the drivers all good! My iPad kept insisting I didnt have the 64bit itunes (which i did) and when I checked the files I was supposed to have as per the link instructions, I had none of them. Disappointed I had to turn to some random files off a blog rather than having apple actually provide useful help. As long as they are making money though :Z

Acrobat 8 Standard not printing at PC with Win7 64 bit

Hello I installed Acrobat 8 Standard at brand new PC with Win7. It does not print into PDF although Acrobat itself works....
I tried to download updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows for version 8.x but it cannot be installed.
Please advice what to do.

It says (in Czech langugae) something like "Installation system of Windows cannot install repair tool for upgrade, because programme you want to upgrade was not found. It is also possibble this repair toll serves for upgrade of another version of the programme. Please check if programme you want to upgrade is installed in your PC and if you use correct repair tool"
This was an aswer when attempting to install
Adobe Acrobat 8.1 Professional and Standard update - multiple languages (AcrobatUpd810_euro_incr.msp)
Before it I installed this:
Adobe Installer Transform Tool
268KB
8/21/2008
Adobe Customization Wizard 8

Problem in accessing the url on client with win7 64 bit

Hello experts,
we recently install fusion 11.1.2.1.0 and database 11g.
scenario:
database server:(192.168.1.100)
plateform: window server 2008, 64 bit
product: oracle database 11g.
application server:(192.168.1.101)
plateform: window server 2008 64 bit
product: oracle fusion 11g(forms and report)
i sucessfully install and configure the forms configuration. my application is running on same application server.
url to access the application:
http://aserver:9001/forms/frmservlet?config=erp
url is accessing on the application server as well as client having 32 bit xp operating
system after insatlling the java.
but if same url is accessing on database server and clients with window7 64 bit, not accessing after installing the java as well.
please help
thanks
yash

Hi Amit
We also have this issue with weblogic webservices. Did you get any resolution for this issue.
When the service is executed for lesser number of hits, all the responses are processed properly. But as load (Number of hits for the same service) increases, few responses are failed to be parsed in the web service client. We could confirm that the producer responds with proper content type (text/xml)
Any help or pointers will be greatly appreciated.
Thanks,
Finny

64-bit Nightly v29 and Firefox v26 under Win7 64-bit are so slow for streaming, achieving only 4% of BW otherwise achieved by the sam firefox under Win7 32-bit.

Under my Window 7 64-bit OS, I've installed both Nightly Build v28 and v29 to perform "internet speed test" and each time, I can only achieve something < 2 mbps for my home Wi-Fi, gateway router which is about >56 Mbps. The only working Nightly version was v23 that could achieve close to >52 mbps. But once I update v23 to higher version, all the normal high speeds I could achieve at Nightly v23 are gone. The same issue plagued also firefox v26 under Win 7 64-bit.
For clarification, this is not true under Win 7 32-bit OS - the same firefox v26 works fine to achieve the raw BW speed close to and >56 mbps. WHy not in 64-bit OS seems to be the main question?
What's going on? I greatly appreciate you looking into and helping me out on this dilemma. Thanks!
Sincerely
Shao Ma

hello Shao Ma, when you are using speedtest.net or a similar flash-based site to measure your connection speed then it might be an issue with the protected mode that [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html adobe has introduced] for its flash plugin for firefox. some old versions of f-secure or trusteer rapport are known to cause such slowdowns together with flash, or it might be something similar on your system that is interfering (maybe security software that is blocking/sandboxing the container used for the protected mode, etc...).
as a workaround you could try [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] & see if this makes a difference.
in case you'd like to troubleshoot the issue further, it would be best to contact adobe's support & file a bug report at bugbase.adobe.com (choose "Adobe Flash Player" as the product & "Browser Integration" as the product area), since they will have a better understanding of the internals of flash protected mode & therefore may know what else might be at the root of the problem you were seeing.

Can a 32-bit version of Firefox work with a 64-bit plugin and the other way around?

I'm using a notebook with Windows 7 x64 and Firefox 4.0.1 x86 and I used to have JDK 1.6.0.24 x64 installed, and also it's corresponding public JRE (also x64). Yesterday, I noticed that Java applets didn't work in Firefox. It asked me to install the required plugin. I did, and JRE 6u22 x86 was installed alongside. Now Java applets did work, hurray.
Because I didn't want multiple (old) JRE's, I uninstalled all of them and installed JDK 1.6.0.25 with it's public JRE instead. Again, 64-bit. Now Firefox refuses to notice Java again. The plugin menu doesn't show any Java-related plugins. (Not even Java Deployment Toolkit, which used to be there before.) I have tried setting the current Java distribution as default for all browsers with the Java Control Panel, but that didn't work.
Is this just because Firefox x86 can't deal with x64 plugins? Should I download a x64 build of Firefox instead? Or will that make the rest of my addons stop working?
EDIT: currently I removed the 64-bit JRE and installed its 32-bit variant. Everything works again, also in Firefox. I would still prefer to have everything 64-bit though.

Mozilla hasn't yet released a 64-bit version of Firefox for Windows, they're all 32-bit.
Namoroka is a pre-release version used for testing new features and security fixes, and was available in 32-bit and 64-bit variants for all OS's. Currently only the Nightly version is available in a 64-bit versions for Windows - currently Nightly 10.a1.
You can get the latest release version here. For Windows it is a 32-bit application. <br />
http://www.mozilla.com/en-US/firefox/

Yet another dead mic with Win7 64-bit upgrd - Portege M700

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

I got a new acer pc with Win7 64-bit and itunes download won't open, it says 'This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid win'

I've tried to download Itunes and itunes for 64-bit using mozilla firefox and internet explorer, even deleted the browsing history and closed and tried to dowload again and tried download quicktime separately, but nothing seems to work.

Try right clicking on the installer and select run as administrator.

Basic host scan (CSD) won't work with Win7 (64-Bit)

Hi all,
We got a customer with an ASA5510, Cisco Secure Desktop (3.6.5005) and Host Scan Engine 3.0.07042 for SSL Web-VPN.
There are some basic host scan checks, like windows process names / AV during login.
On the endpoints with Windows 7 (32-Bit) and Windows XP, the "debug dap trace" shows, that the host scan recognize the status of the process.
On Windows 7 (64-bit) unfortunately not. The AV check is working properly.
Is there an issue with 64-Bit?
Any ideas?
Thanks,
Norbert

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

Audition 1.5 with Win7 64 bit

Hey all.
Complete novice here. Been using Audition for a couple of years to record and mix music. Fantastic program!
I recently upgraded from XP SP3 to Win7 64 Pro. Audition loads (with the Unknown Publisher error (no biggy)), but when I go to record, I just get spikes. I've reduced my line in to about 20. No difference. When using Monitor Level, everything looks normal. The levels are following along well. Hit record and it's just spikes. Playback is spikes too. It's as if only the Peaks are recording.
I have no idea what to do. I suppose I could upgrade to Audition 3, but I'm not sure that is the solution. I'm using Onboard sound (Realtek ALC892).
Thoughts, suggestions?
THANKS!

Almost certainly a Realtek driver error - try checking for a revised one.

Is Firefox compatabile with Win7 Ultimate 64 bit OS

Similar Messages

Maybe you are looking for