Is Firefox directly linked to IE Explorer via the LAN settings in IE Explorer? I set up a 0.0.0.0 proxy to neuter IE Explorer and it also neutered Firefox.

I heard I could kill IE Explorer with a simple Tools > Internet Options > Connection > LAN Settings > Proxy Server setup to the address 0.0.0.0.. And, it killed the IE Explorer. From the "question" above, you know I was needing it dead because even though I NEVER run IE Explorer, every time I run CCleaner, it shows it cleans some,IE Explorer cache. I don't know if it's got to run somewhere in the background for some unauthorized reason (?) or if I have some strange virus / trojan / backdoor something that's somehow using IE Explorer to call a server and my AV (Avast) can't detect any of it. Thing is, I got IE Explorer to begone, but I could no longer access internet through Firefox either. I reset my router, cleaned like an OCD maid, and restarted. Nada. Just wouldn't connect. Another system connected to the router worked just fine. I went back into IE Explorer and tried un-checking the proxy server and quit. Sure enough, Firefox was again sucking in and spitting out packets. Question is: Are IE Explorer and Firefox connected via IE Explorer LAN settings? Or is there some malware that uses IE Explorer to communicate? And, if the latter, any ideas WTF? This is a new problem, Has anyone else seen phantom IE Explorer cache being cleaned up without ever being run?
Thanks, and sorry this is so long!

hello magnanadanna, you can set up different proxy settings for firefox. go to ''firefox/tools > options > advanced > network > connection - settings...'' and select '''no proxy'''.
[https://support.mozilla.org/kb/advanced-settings-browsing-network-updates-encryption#w_network-tab]

Similar Messages

How do I create a direct link to a page in the secure zone?

How do I create a direct link to a page in the secure zone? Right now I have a menu link to the "member-news" page, which is secure. When clicked, the link goes to the member login screen. Upon login, it drops the user onto the default login page.
I want the "member-news" link to allow the user to log in and continue onto the "member-news" page without stopping at the default login page.
Is this possible?

What program are you using?

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how? Thanks!

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!

What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck.

Direct Link to Next Task via Email

I would like to send a direct link to the next process task via e-mail. In this scenario a user would receive notification to complete a task assigned to them and be able to access that task directly from a link in the mail.
I am currently able to send out notifications and provide test links in that notification. What I do not yet know is how to link directly to the next task.
Is there a WebDynpro app provided by GP where you can pass a process task id as a parameter and link directly to that task in runtime? If so how do I retrieve the task id of the next task from the process?
Best Regards

Hi,
Before the process step for which you want to send the notification to the user add another process step using the pre-defined callable object Send Notification. You need to assign a mail template to that CO. So create a mail template with a standard message body and include the following as a replacement for the next task URL :
`
writeln(sy.workitemurl);
`
Assign the send mail to the same processor of the next action and when the user gets the mail the URL of the next task will be present in the mail message. Clicking that he/she can directly open the next task in portal.
Thanks,
Dipankar

Sending URL's to outllook which directly links to th workitem of the UWL

My project which was developed on ASP with oracle is now being re-designed into enterprise portals and SAP R/3 4.6c. Here the scenario is when a user creates or changes a pricing condition on the PORTAL .it should trigger a workflow in SAP r/3 which goes through a loop of approval process and finally gets approved or rejected.
Here the notifications are sent to the approvers outlook where the outlook subject should contain two links, the first should link to the portal UWL and the second should link to the respective WORKITEM in the UWL.
My questions are
1)     How an event on the portal side does trigger a workflow at the backend?
            Do we need to explicitly raise the event in the BAPI for create/change to trigger workflow using SWE_EVENT_CREATE or is there any alternative?
2)     How to send a notification to the outlook with URLs which directly points to UWL and respective work item in the portal UWL?
                 I gone through the EXTENDED NOTIFICATIONS FOR SAP Business WORKFLOW help file but I didnt a clear picture of it.
                         It is all with the BSPs in the help file?
3)     Its only configuration that we do in the portal to get all the work items from SAP inbox or Do we need to do any extra coding to get all the work items into the UWL ?
Please do the need full .Basically I am new to WEBFLOW. So, if possible spare some time and send me the flow and the solutions in detail.
Advance thanks
Warm regards,
Sateesh

Hi sateesh
To make RSWUWFML2 work at least you have to do:
1. Set up SAP Gatway to connect to Outlook (SCOT) as type INT
2. There are some settings additional that basis will have to carry out - CHECK OSS for that
3. Ensure all the users have home email address
4. In SO16 Tab MailSySgRP choose send email to user's home address
5. Then in SAP schedule report RSWUWFML2 (frequency should be ideally
every 10 min -depends on the volume of emails)
You will find further information in note: 733681
If the requirement for direct acces to the workitem in the UWL is very important you could do the following:
Make a copy of the report ie. ZRSWUWFMS2 and make the appropriate changes in the code and schedule that instead. This is not recomendable, since all changes made to the report by SAP will be lost to you.
Hope it helps
Kind regards
Mikkel
Message was edited by: Mikkel Iversen

I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

Firefox 3.6.16 won't keep the "custom settings for history", thus causing page-load issues - any clue how to make it "stick"?

Ever since I updated to Firefox 3.6.x I am getting constant page-load errors on apps in Facebook. I've cleared the history, the cache, cookies... and will literally set it for the "custom history settings" in my tools/options/privacy tab, reload the page, it's fine. I go to another page and come back to the app (same window) and get the error message again. Back to tools/options/privacy and "Remember History" is showing, rather than the custom settings. This is happening incessantly.

I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.

After following the directions for attaching my IPad via the Apple digital AV adapter

I followed the directions. My TV is managed through a Yamaha receiver. I tried using different ports, but my iPad didn't show on my TV monitor. What am I missing?

I tried connecting it directly to the TV & got the same non-result. Of course, would like it to go through my receiver so I get the benefit of my surround sound system. Got any other ideas? Thanks

Firefox not let me log on to the providor before it starts an update. Which it can't do because I have not logged on; and so I can never do the update and never log on. I don't want it to update now! Where is the wait button?

'''bold text'''I have not been doing the updates because Firefox says it will be imcompatable with itunes and my virus checker.
Today it tried to force the update. Not nice.
It failed on boot up, uhh you need to be on the internet, maybe.
I got to the logon screen of Starbucks but it would never let me click I agree and connect. My harddrive light was flashing mores code at 1000 WPM.

See this support article: <br />
https://support.mozilla.com/en-US/kb/Software%20Update%20Failed

Direct linking to Blog

So, I've been wondering how to do something for awhile....
So, I want to be able to directly link to a BLOG via the Navigation bar at the top of a page.
I want to be able to do this without having to go through a module that THEN links to the OVERALL.html
So in short, I want the NAV bar link to connect directly to Overall.html. (I've tried linking directly, no go.)
ANy thoughts?
Thanks!
Ps- sorry if this is an easy answer, I just can't seem to find.
Thanks again!

Are you using the BC Dynamic Menus? If so it is quite simple, just go to where you normally set the link to any page and select blogs. See attached:

Can't download via the direct link for IE (HTTP 403 Forbidden)

Win7 Pro SP1 32-bit
IE 10.0.9200.16635
When I try to download/install from http://get.adobe.com/flashplayer/ I get the "cannot contact reliable source", so I then tried the Direct link for ActiveX/IE:
http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
and I get a HTTP 403 Forbidden. I have also tried that link in Firefox and Opera, but all I get is an empty page. I've also tried with antivirus off, firewall off etc... no luck.
BUT... If I try the second direct link(Plug-in/All other browsers)
http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
it works in both IE, Firefox and Opera.
Then I started up an old XP PC just to compare, and the download ActiveX version were succesful.
Why doesn't the direct link for ActiveX work on my Win7 PC, regardless what browser I use?
(I have never had any problems with updating/installing Flash Player before, on any computer including my Win7)

Maybe I was unclear: The "Direct Links" I referred to, ARE the offline installer links.
The link Flash Player for ActiveX (Internet Explorer) doesn't work(forbidden access),
but the link Flash Player Plug-in (All other browsers) works.
BTW, is there perhaps any other URL to a offline installer, besides the one that doesn't work on my PC?
(http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe)
Added screenshot of trying to download offline installer

Firefox PDF links - Trying to Open in Pages

Hi all,
I have a bit of a hiccup in that every time I attempt to click on a PDF link in Firefox 3.6.3 to open the file in Preview, the system attempts to open it with pages and I receive the following error message:
The document “PhotoVideo_Solicitation1449-1.pdf” couldn’t be opened. In a Pages Error window. The file automatically downloads and I can open it fine from there, but I'd like to be able to open it in Preview directly. I've gone into the OS settings to make sure Preview is default for PDF (it is). I've also made sure that PDF's in Firefox Preferences are set to open in Preview (it is).
Thanks if anyone can offer advice, solutions etc. This brings me back to my Windows days, of which I NEVER want to return!!!

behrlich
Welcome to the forum.
Sounds like your "helper applications" have got muddled.
In Firefox:
+Menu > Firefox > Preferences > Content > File Types > Configure how Firefox handles certain types of files > Manage… > PDF > Open With > Change Action… > Open them with this application: > Browse to Preview in your Applications folder > OK+
peter

OIM11gR2 - Is it possible to create a direct link to a specific area in the oim plattform?

hi,
is it possible to create a direct link to specific area in the oim self service plattform? for example a link to the users account list, or a link to a specific resource account?
br,
max

Hi,
Yes, Its very much easy in R2 as compared to R1. You can use following link to achieve your requirement:
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABIDJAB
~J

HowTo create a direct link to an approval

Hi all,
did someone of you tried to create a direct link to an approval?
The link looks like this: "u2026/ProcessRequest?RequestID=12345&TaskID=111&EntryID=01234"
So my question:
Is it possible to use SQL statements in these scripts to read out the needed data from "MXP_PROVISION"?
I have tried out this:
Configuration in "EMailNotifiaction_Approval" Pass:
MSKEY     %MSKEY%
MX_APPROVERS    %MX_APPROVERS%
MX_ENTRY_REFERENCE     %MX_ENTRY_REFERENCE%
Coding in the script of "Next data entry" (just the relevant part)
var entryReference = Par.get ("MX_ENTRY_REFERENCE");
var sql = "SELECT MSKEY FROM MXP_PROVISION WHERE AUDITREF = " + entryReference;
var sqlresult = "";
sqlresult = uSelect (sql);
I don´t get a Value into "sqlresult". I think one problem is that he doesn´t read the value of entryReference
Br,
Philip

Thank you Thomas,
the privilege was the problem.
Maybe someone of you had the same problem.
I have solved it like this now: (All with * marked lines can be found in the HowTo guide)
*var pendingValue = Par.get("MSKEY");
*var approverList = Par.get("MX_APPROVERS");
*var entryReference = Par.get("MX_ENTRY_REFERENCE");
*// uErrMsg(logLevel,"Approver List: " + approverList);
*var approvers = new java.util.Vector();
*approvers = uSplitString (approverList, "|");
*var i = 0;
*var result;
*var emailAddress = "";
*var idStore = uGetIDStore();
*var emailAttribute = "%$MAILATTRIBUTE%";
var sql = "SELECT APPROVALTASKID, AUDITREF, PARENTMSKEY FROM MXWV_PENDING_APPROVALS WHERE MSKEY = " + pendingValue;
var sqlresult = "" ;
sqlresult = uSelect(sql);
var part = new java.util.Vector();
part = uSplitString (sqlresult, "|");
actionid = part.get(0);
auditref = part.get(1);
usermskey = part.get(2);
// This line was made to get the unique name of the requesting person
var sqlname = "SELECT AVALUE FROM MXIV_SENTRIES WHERE (ATTR_ID = 2 AND MSKEY = " + usermskey + ")";
var name = "";
name = uSelect(sqlname);
var url = "http://10.44.110.68:50000/webdynpro/dispatcher/sap.com/tcidmwd~workflow/ProcessRequest?RequestID=" + auditref + "&TaskID=" + actionid + "&EntryID=" + pendingValue;
I think there are much more solution. (Iam new at IdM )
Br,
Philip

Saving Looks in Premiere / SG Direct Link

Is there a way to save Looks in Speedgrade coming from Premiere's Direct Link feature? It says the folder is read-only, is there to make it so I can write look files.
Thanks,
Chris

Yes, You can save looks in SpeedGrade! You can save looks to any folder you select in the Look Manager by clicking on the tabs or on the plus sign to add a new tab.
See if this post helps you get started: http://adobe.ly/V4C1yh
Eric

Is Firefox directly linked to IE Explorer via the LAN settings in IE Explorer? I set up a 0.0.0.0 proxy to neuter IE Explorer and it also neutered Firefox.

Similar Messages

Maybe you are looking for