Is FrameMaker suitable for books ?

I need to create pdf books organised in the following way:
A front page, a TOC, a text part from a word .doc document, several (10-50) pdf files of 1-100 pages each. The pdf are or electronically generated or from scanning and for legal requirement should not be edited. The word document should be edited until the very last minute and should contain hyperlink to the pdf files. The TOC as well should be fully hyperlinked.
Is Framemaker (or Robohelp or InDesign) the suitable software?

I think Framemaker is what you want,it can import the .doc files and generate a pdf out of it and create the TOC on the basis of headings or as per your requirement and you can generate TOC separately,and,if you work with robohelp,it also can perform the same functions however it cannot create the book.
If you have the Technical Communication Suite 3.5 ,you have Robohelp 9 and Framemaker 10 in it and you can perform the functions and Robohelp and Framemaker and combine them to get one single output as a PDF or html or other output formats as per your need along with all the cross-references,TOC,conditional text and other features both of Robohelp and Framemaker.
You can download the trial version of Technical Communication Suite from www.adobe.com and try it out and let me know if you have any other questons.

Similar Messages

Apple Travel Adapter suitable for MBA?

In the Apple Store website, the products listed as suitable for the Apple Travel Adapter Kit includes the MacBook but does not mention the MacBook Air. (The MBA's MagSafe Power Adapter is 45W; the Mac Book's is 60W) Has anyone used any of the Apple adapters with an MBA? I'm going to be in Argentina next February and would like to use mine while there.
Hope someone can help me!
Warewolf

The travel adapter kit is only the detachable plugs that you can swap out on your brick. I have used the travel adapter kit appropriate attachments in Europe and UK and it works perfectly. The brick itself is the "converter" for your MBA. The travel adapter kit is just the interchangeable plugheads.

MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

Hi all,
I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
How do I solve this problem?
OS: Windows XP Professional
Browser Installed: Internet Explorer and Firefox
Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
Thanks in advance.
Regards,
Goh Tiam Tjai

I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Regards,
Goh Tiam Tjai

How do I convert a DVD to a format suitable for a Digital Download?

I need guidance as to the best way to convert a DVD to a format suitable for a digital download. I am a web developer not a video expert, I only have access to Premiere Pro as a Creative Cloud subscriber. I'm not even sure if this is the best application to do what a need to do.
My client sells books some of which have accompanying DVD's, she wants me to convert these to a format that can be downloaded. I don't have the original files, just the DVD's themselves to work with.

Change steps 2 and 3 to your preferred web format.
http://www.videohelp.com/tools/XviD4PSP

Recovery cd's suitable for similiar models

Is recvoery cd - part numbers # 571178-371
                                                         571176-371
                                                         577583-B22
suitable for all elite book 2740P  models i have     SJ621UC#ABG & XP898PA#ABG ,
these are the only discs I have (1 of each) for fifty tablets

Just for info: the addresses you can find on Toshiba page http://eu.computers.toshiba-europe.com under Support & Downloads > Find an authorized service provider.
Bye

Updating variables in Framemaker 7.1 book

I've certain tasks that I do repretitively over a product release. For example, the product version is updated in every release (major or minor). Product version is a variable which I set by opening each file within a book. Each book has several files and there are quite a few books to update. Going down to the file level within each book is very tedious and time consuming.
Does anybody know how to update variables at the book-level in FrameMaker 7 for Windows?
Cheers,
Rupen

In the Book Window select the files that you want to update. Then use File > Import > Formats to import the updated variables (from your master template file) to all those files in one go. Same procedure as per an individual file, except tht you are using a book file instead.

Can anyone recommend a brand of external firewire drive suitable for FCP?

Can anyone recommend a brand of external firewire drive suitable for FCP?
I have a mac book pro with the latest OS.
I have been told by Ken Stone that LaCie is no good and western digital is also no good.
I am in Australia and would like not to spend over $500 for a 1TB 7200 rpm drive.

'No good' is a matter of opinion and your expectations. I know people who use WD drives, and I myself have used Lacie ones with no problems. That said there are a lot of people who wouldn't. If you want quality (speed and reliability) you have to pay for it. If you're willing to compromise then you pays your money and takes your chances.
If you go for Lacie or WD then make sure you're getting 7200rpm drives that connect via FW or eSATA.
If you want a recommended solution then most popular seem to be G-Tech, Caldigit or Wiebetech. I have no idea of their availability or pricing in your neck of the woods.

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity?

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity? I am using a MACBook Air

just read this in an other answer:
Pages can open docx files, Numbers can open xlsx files. Each can export to can export .doc or .xls to the newest Word or Excel format.respectvely, but not to the more recent .docx or .xlsx.
Translation is not perfect in either direction. Numbers and Excel handle some similar features (eg. pop-up menus vs data validation) differently, and the translator cannot translate from one implementation to the other.
If much of your work is going to be transferred between your machine and Windows machines running either MS Excel or MS Word, with editing taking place at both ends of the tunnel, then you'll probably be better off with Office, or one of the Office clones on the Mac end.

Can you use a Laser Card to pay for books on ibooks?

Can you use a Laser Card to pay for books on ibooks or is only VISA acceptable?

No. iTunes Store only.
"An iTunes Gift Card lets you shop for anything at the iTunes Store " > http://store.apple.com/us/browse/home/giftcards/itunes/gallery

As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using IPhone 3GS -32 GB. Sincerly req your reply

As a part of my Daily Reporting Activity; i have to send 35 SMS everyday. Can someone suggest me which software is suitable for my usage as it's tedious job to forward the same sms report 35 times. I am using IPhone 3GS -32 GB. I am using service of Vodafone, Mumbai. & when i first time sent 35 SMS (having habit of Nokia to send group SMS at the click of one button) my IPhone sent 35 MMS.

Found something for you that might be useful:
http://itunes.apple.com/us/app/igroup-sms/id377378452?mt=8

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

Does not contain a static 'Main' method suitable for an entry point_

Hello
I want to to do a project with Entiity Framework . I add a project to my solution for my domain class and it's name is 'LinkModel.DomainClasses'. when I prees F5 there is an error like bellow.
Could You help me to solve this? thanks alot
..\Documents\Training\LinkCodeFirstLast\LinkCodeFirst\LinkCodeFirst\LinkModel.DomainClasses\obj\Debug\LinkModel.DomainClasses.exe'
does not contain a static 'Main' method suitable for an entry point

Hi bkshn,
This error is caused by the missing "Main" method in your project. it is the entry point of your project.
If you want to create a EF project, you could follow the way in the aricle below.
https://msdn.microsoft.com/en-us/data/ee712907#codefirst
The Main method is like below.
class Program
static void Main(string[] args)
using (var db = new BloggingContext())
// Create and save a new Blog
Console.Write("Enter a name for a new Blog: ");
var name = Console.ReadLine();
var blog = new Blog { Name = name };
db.Blogs.Add(blog);
db.SaveChanges();
// Display all Blogs from the database
var query = from b in db.Blogs
orderby b.Name
select b;
Console.WriteLine("All blogs in the database:");
foreach (var item in query)
Console.WriteLine(item.Name);
Console.WriteLine("Press any key to exit...");
Console.ReadKey();
And you could start to learn the EF from the following MSDN blogs.
https://msdn.microsoft.com/en-us/data/ee712907
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Projectname.exe' does not contain a static 'Main' method suitable for an entry point .

Hi,
I'm developing a blog reader for windows 8 store app. It was perfectly worked before. But because of some miss behave my coding i get below error. No other errors there.
Error 1 Program 'c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main' method suitable for an entry point C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC
Blog_Reader
Please help me to figure this.
Thank You!

Go to your App.Xaml and R-Click Go to Properties
Check whether the Build Action is ApplicationDefinition
If not change it to ApplicationDefinition. Clean the code (solution ) and Deploy..
Chears....

Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

Hi,
I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
error. No other errors were there other than that.
Error
Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
method suitable for an entry point.
C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC Blog_Reader
But I found the solution while I fixing it.
Solution for that is like below.
Go to your App.Xaml and Right-Click thenGo to Properties
Check whether the Build Action is
ApplicationDefinition
If not change it to ApplicationDefinition.
Clean the code (solution) and Deploy
Now the error is fiexed.

Hi Robana,
Good sharing on the Technet.
This will definitely benefit other who may encounter the same issue as yours.
Thanks for your sharing again.
Kate Li
TechNet Community Support

Is FrameMaker suitable for books ?

Similar Messages

Maybe you are looking for