Is free how many times?

Hi.
This adobe cloud is free how many times?
Thanks

You mean Creative Cloud? Or Acrobat.com?
The Creative Cloud trial can be used for 30 days.
The Acrobat.com services can be used once for free (at least it was that way a year or two ago).

Similar Messages

How many times can you download a free trial, on the same computer?

about how many times are you allowed to download the same free trial software on the same computer?

You can install a trial once on the same computer. After the trial period ends, you'll need a serial number (in other words, a purchased product) to continue using it on the same computer.

How can I tell how many times my free ibook is downloaded on itunes?

Hi, Apple has accepted my ebook in their itunes store. The book was make at Blurb.com and submitted to Apple through Blurb. Now, I see my book in the store and I even see ratings so I know someone must have downloaded it. What I'd like to know is how many times the book is downloaded so I have an idea of how the book is doing. Right now it's free. I'd just like to see the stats.
Thank you for your help,
Patsy

Go to this link - http://www.wikihow.com/Delete-Music-on-Your-iPhone It's pretty straightforward. I hope this helps. let me know if you need any further assistance.

When I go to a website, it takes me to a different one. No matter how many times I open it, it takes me to random sites.

If I open a page in a tab it will take me to a completely different site, and no matter how many times I try to close and open a new one, it keeps going to different sites. It also happens when I type the website into the address bar, it still takes me to a random site. Is it something with my computer, or is it Firefox, and if it is a problem with Firefox, how do I fix it?

Sounds like Malware on your PC.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]
Also, the '''''More system details...''''' to the right of your posting shows that you have a few Plugins that need to be updated. See the Mozilla Plugin Check page. 
http://www.mozilla.com/en-US/plugincheck/

HT1977 How many times can you download an app?

I have purchased an app from itunes store, my family has alot of devices and i want that app on all of them. we upgrade alot so how many times can you upload an app? Unlimited?

Welcome to Apple Support Communities
You can download an application in all the devices with your Apple ID as many times as you want for free. You may have to pay again for it if the developer releases an update and wants to make it paid.
It's recommended to have the same Apple ID in all your family devices, but you can also use it with a different Apple ID. In that case, you will have to let your family know your Apple ID password to update the application

On average, how many times do you have to restart ...

Ever since I've been using the E71 (less than a month, a new set), I have to restart it about thrice daily. Mostly, the problem occurs while connecting the phone to the PC (Windows 7) when the USB connection type selector on the phone (which appears when you connect the cable and asks for which mode to connect in) freezes; but some other times, just about any application (including the built-in ones) decides to take a nap and the only way to get it back is turn the set off and then back on again. And as soon as that is done, the app icons are all moved back from the customized folders to the folder "Installations" - very frustrating. I'm afraid of restarting this phone as lots of settings and app icons revert back to the defaults after restarting and I've to go through them again. But at the same time, there seems to be no way to make a stuck USB connection type selector work again without restarting.
Well, from my experience here, I know this particular problem has no solution. (Even if the process is ended using an external app manager, it hangs again on starting the app. This continues until the phone is restarted.) Therefore, I'm not looking for a solution here, although one will be welcome if you've undergone the same and have found a workaround. I just wanna know if you do also have to restart your phone. (I also have one Sony Ericsson and an iPhone; I don't generally need to restart them as long as I don't want to restart. At my current place, however, a Nokia phone is all I can use.)
So, do you have to restart your phone when you don't actually want to? If so, on average how many times a day (or a week)? This will help me determine if the problem lies with the phone or it's me who's doing something differently. Is there something you need to do regularly or often (like connecting the phone to the computer) and that operation generally results in a restart of the phone? Thank you for your response.

Yes I have apps installed on the SD card. Shifting them to the internal memory is not really an option (would leave very little free space over there which would then cause other problems). Besides, if the phone allows you to install the apps on the card, shouldn't they work from there? Yes, they should.
Without the card, there will be no custom apps and the phone would be almost useless (will turn into a basic device used to make calls and send text). To me, this is not an option. Also, I don't see how it would solve the problem automagically after some time.
The card doesn't seem to be faulty. I tried to connect the phone without the card inserted and it got connected alright for two times but the USB mode chooser froze the third time, just the same as with the card inserted. So a new card is probably not going to solve the problem.
Must be something strange happening here. Maybe it's due to the apps installed on the card rather than the internal memory, but I just cannot install all those apps within that limited space.
Thanks for the feedback. I'm waiting for more members' experience to come to any conclusion.

How many times can I download Quick Time Pro once I purchased it?

Last September I purched my update to Quick Time Pro. Now I bought a new Computer and re-formatted the old one, not being able to copy Quick Time Pro from the old to the new computer. Therefore I wanted to download again Quick Time Pro: In the settings window I introduced my program key and then "accepted". It said "Quick Time pro" below the registration line; however, the "apply" buttom was not operative. I checked and my Quick Time version was still "Quick Time 7", not Pro. My question is: how many times can I download Quick Time Pro once I purched it? If I can download it more often than once, how do I proceed? Thank you for your help.

I started this thread:
http://discussions.apple.com/thread.jspa?threadID=2454706&tstart=0
but I'm afraid it's so involved that thus far, nobody has "touched" it.
However, PART of my problem is similar to THIS person's.
My problem is that I have QT on two different drives in one computer; the one I paid for [QT Pro?] and one I got for free; QT7. I fear the free QT7 might have "interfered" with my "Pro".
So, taking your advice above, looking in the "Help" "About" menu, I find that BOTH of mine another "offer" above the word "About"; they suggest that I "Purchase QT Pro"...... so now, if BOTH of my QT's say THAT, then may I conclude that I do NOT have the Pro version? I'm meaning to say that if I already HAVE the Pro, they wouldn't suggest that I go and "Buy QT Pro".... right? Is this a safe conclusion? for ya'll that HAVE the Pro, and KNOW it, does it suggest to you that you could go and "purchase QT Pro"?
Thanks,
LarryR : )

How do I keep track of how many times a method is called inside anthr clas?

I am writing code for a program that solves a Knight's Tour. A Knight's Tour is a path a Knight Chess piece can take around the board starting at any spot, touching every square once, and only once. I have to write 2 classes and one is provided. The provided class is encrypted and written by our professor. All I know that it does is simulates the game using the two classes I write and provides a print out and prompts to ask the user which square they want to move to next.
The square class I have to write consists of a constructor that makes a square object that keeps track of its color (white/black) and its status (whether it has been visited, is occupied by the knight, or is free and has not be visited).
The GameBoard class I have to write is what I am having problems with. I am writing a method that determines how many squares have been visited. The previous mentioned class that my professor wrote for me contains a method moveKnight();. The way the program works is that every time moveKnight() is called a square's status is changed to occupied and therefore visited later. moveKnight() will only work if the move requested by the user is a valid move.
SO! My main problem (sorry for all the explaining, just trying to give you all the information) is that I don't know how to keep track of how many times moveKnight() is called by the program. If i can figure this out it should be simple. I'm new to java but i believe...
if(moveKnight() is called)
{count++;} //count is a member variable already initialized
return count;
the moveKnight() is called section within the if() statement is what I am unclear how to do. Please help.
Thanks, Veritas

in your case you want 'count' to be a class attribute rather than a local variable. But yes, incrementing it each time that the method is called will serve your purpose.

Statistics - To get how many time a report has been run

Hi Gurus,
I would like to know how many times each of the reports on the portal has been run. If I could get this by user id, that would be great.
Do you know where I can get such information?
Regards
Mathew

Hi Guys,
This can not be done throug ST03/ST03N. For this you will have to either use the SAP delivered BI Statistics query which is built on 0TCT_M01 multiprovider. Make sure your data is upto date before you run the query.
Disadvantage of teh SAP delivered query is, it will not give you result which is older than 24 hrs. So basically it gives you oppourtinity to analyze only last 24 hrs data. If you want to modify the query, you can copy the query and modify as per your requirement.
Now coming to your question of finding how many times a report is run:
Question is how many queries do you have in your report. If your report contains one query only, there is free char in the query called Frontend Session. Everytime your execute the query you will have a new Frontend session ID.
So create a formula as counters for all values and set the exception aggregation based on Frontend session. This will give you the number of times each query executed. If you drill down by Users, you will get this numbers by users.
- Danny.

How many times should the computer cycle on-off when doing a factory reset?

I have a Toshiba A665-S6065 which can not boot. Yesterday I tried the Auto Recovery by holding the 0
while booting, and following the default instructions. It seemed to complete without errors. But the computer
will still not boot. Today, when reading the instructions, it said to expect the computer to cycle on and off severa
times. So how many times? will there be any propmts or messages? How long should the entire process take?
How long should the computer be off before it turns on again each time? I think I might be screwing things up
by intervening and trying to start the computer myself because it isn't clear to me what should actually be happening.
Could someone please tell me what to expect before I start looking at possible hardwre problems?
BTW, I can access the Setup and Boot Menu.
Thanks,
kjdroid
NEW info:
Now when I boot while holding the 0 key, instead of going directly to the Recovery Wizard, it goes to the
Windows Boot Manager.
from there the options are Windows Setup [EMS enabled]
and Windows Memory Diagnostic, as well as the F8 option for advanced options.
If I select Windows Memory Diagnostic I get
File: \boot\memtest.exe
Status : 0xC000000f
Info : The selected entry could not be loaded because the application is missing or corrupt.
If I select Windows Setup or F8 followed by normal windows startup or startup in safe mode then
I get the following sequence of events.
Starting Windows with the Windows logo.
then the blue screen
Then to the Toshiba Recovery Wizard, where it partitions, and does the CRC and then prompts to press
finish to restart the computer.
Either the computer does not shut down, or it stops and starts very quickly because all the lights cycle
on and off but it does not appear that the start/stop light actually ever turns off.
Then I get the Starting Windows with Logo again.
Then the Recovery Wizard comes back but only with the screen about partitioning. It does not
do the recovery and CRC this time.
Nextis the Toshiba Logo reappears again with the options for F2 or F12 for the Setup and Boot Menus.
Finally, I get a blue screen and it appears nothing else is happening. I let it sit for 30 minutes before I retry, because I am not sure what is supposed to be happening now.
Also, one of my attempts, I got as far as the messages:
Setting up the Registry
Starting Services
Applying System Settings
Will continue after restarting your computer
Is preparing your computer for first use.
But then again, it just goes into the blue screen state until I finally decide to shut things down.
Am I being premature or should I let the blue screen sit there for a few hours while work is being
done in the background? I don't hear any sounds from the computer that would indicate any type of activity.
Thanks again
kjdroid

Actually, it's kind of hard to tell you what to replace. If you have a spare hard drive laying around, go for it. It also could be memory issues (I have the same model as you) & it was my sister-in-law's notebook before I get it. The notebook had several memory dumps that CCleaner found & deleted when I was working on it.
I told her that I would re-install it for her to make sure there no viruses or such. After backing up the computer, I proceeded to what was supposed to work, pressing "0" at startup to no avail, then booted into the area where the system restore, command line repairs & such were, & there was the option for a factory reset, the last option. I chose that one, & like you stated, it rebooted numerous times, until finally it was through. Longest factory re-install I've ever done.
What led me to believe there were memory issues was during the first round of updates, it BSOD'd, another memory dump was found by my portable CCleaner. It still had the original Samsung PC3-8500 memory, so I took the memory that shipped with my MSI (PC3-10600) & installed that, then not only was all fine, it was noticably faster. Once I got it fully updated & scanned with MBAM & the ESET Online Scanner (I always do this when installing or re-installing a computer), I removed my memory & placed hers back in, then returned it to her.
I ended up with it about 10 days later, she said it was still dumping. Needing a spare notebook, I offered $100 for it, ending up paying $150, but still came out way better than on eBay.
Once I got it, I placed the 6GB RAM back in there that I had, & also replaced the HDD with a extra Crucial M4 that was laying around. Right before swapping drives, I ran HD Tune (free) on the original, there were yellow attributes, meaning that it had issues pending. It's a 500GB Seagate HDD that runs at 7200 RPM. Just so happened, I lost a 500GB Seagate Barracuda desktop HDD (7200.11) less than a month ago. Booted the computer, the screen stated "No Operating System found".
So it could be either the HDD or memory (RAM). Or worse yet, the MB itself. Has it been dropped? Notebooks are fairly durable, but they don't take to being dropped very well. Does it run hot? If so, there may be severe dust buildup that's causing it to overheat, that will make it BSOD. My guess is that's it's one of the first three that I mentioned above & if it's the MB, forget it. Prices are too high, even for used ones & in a notebook, it's basically a total teardown to replace it. If it's a new MB, it may cost between $200 to $400, depending on popularity of the model. That's too much to pay to repair a computer built in 2010.
I'm trying to give some suggestions here, based totally on personal experience on my & other's computers that I work on. However, online it's a cat & mouse game. I don't want to tell you to purchase another HDD unless it's almost 100% certain that's the issue. Which is why I asked if you have a spare earlier. Also, try reversing the position of your memory sticks (a 5 minute job), it's behind that lid close to the battery underneath the notebook.
Post back if you need further assistance. Someone else may have other ideas, so follow the thread.
Best of Luck,
Cat

How to check the query, which had run how many times in a year?

<Moderator Message: ok, subject is better now but you didn't search at all. Therefore thread is locked again>
Hi All,
I want to check the Query statistics like it had run how many times in a year?
Regards,
Kiran
Edited by: Siegfried Szameitat on Dec 9, 2008 11:55 AM

Hi Kiran,
please follow the below steps
1. Create a query for that purpose
2. Make use of BW Statistic InfoProvider 0BWTC_C02
3. in Col: Key Figure:0TCTNAVCTR
4. in Row: 0TCTQUERY (select a variable 0TCTQUYS)
5. in Filter: BW System( 0TCTSYSID) [give yr source system name whether its production/quality)
6. in Free char you can give calmonth/year or user if want to do so.
save and execute the query
you will be asked for input the query name
As output you will be getting count (as many times query is hit by all users since the time it was created)
if you give date and user name then it will display the count accordingly.
Hope it Clarifies you.
Thanks & Regards
Nagaraju.V

HT204370 How many times can I watch the movie I just downloaded?

How many times can I watch the movie I just downloaded?

You can watch it as many times as you like, there is no limit. If you take a backup of it (even if you are in a country where films can be re-downloaded for free, there is no guarantee that they will remain in the store for future re-downloading) then you will be able to continue watching it for years to come.
Film rentals are different, in that when you start watching it you have 24 hours if you are in the US, 48 hours elsewhere, before it expires - but during that time you can watch it as many times as you like.

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How many times can I review my account ?????????

I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. It wants me to review EVERY time. Let me know if anyone can shed some light on this problem.
This is a REAL PAIN.
Thanks, Andy

Lfc89 wrote:
How many times can I change my country or region on my ipad 2 or iPod touch 5
Not sure what you are asking... but...
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

How many times can a team member install Creative Cloud for teams ?

How many times can a team member install Creative Cloud for teams ?
Is it possible for one team member to install it for example on a portable mac and a desktop pc at the same time?

From the Creative Cloud FAQ at https://www.adobe.com/products/creativecloud/faq.html under the Purchasing and getting started section:
On how many computers can I install the software I download from Creative Cloud?
You can install the desktop applications available in Creative Cloud on your primary computer and one backup computer, as long as they are not running at the same time. You will have access to both the Mac OS and Windows versions, so if you have a Mac at home and a PC at work, for instance, you can install your applications on both. See the product license agreements page for more information.

Is free how many times?

Similar Messages

Maybe you are looking for