Is Function module GRAPH_SET_CUA_STATUS Obselete?

Hi SDN,
Is Function module GRAPH_SET_CUA_STATUS Obselete?
I did not find any thing in Function module documentation whetther this FM is obselete or NOT.
If obselete then Pls let me know the replacement for FM GRAPH_SET_CUA_STATUS. in ECC 6.0.
Regards,
Rahul Wagh

Hi,
The Function module GRAPH_SET_CUA_STATUS is still available in ECC6
This function modules is set to obsolete in order to avoid the
usage in new development projects. It is still maintained and
supported by SAP and can be used in your application.
Please refer to SAP note 109533     Use of SAP function modules
Regards,
Aidan

Similar Messages

  • Obselete function module replacement in ECC 6.0

    Hi SDN,
    Pls let me know the replacement for FM GRAPH_SET_CUA_STATUS. in ECC 6.0.
    Regards,
    Rahul Wagh

    Hi Rahul,
    in [this blog |/people/andrea.olivieri/blog/2010/04/30/community-call-obsolete-function-modules-replacement-matrix-for-ecc-60]published several months ago, I collected my thoughts on this persistent issue.
    In my opinion you can continue to use the FM GRAPH_SET_CUA_STATUS without any problems, confirming that the presence of numerous standard programs that use this method.
    Regards,
    Andrea

  • Regarding obselete Function Module in ECC6.0...plz repl urgent

    Hi,
    I am copying a program from <b>4.7 to ECC 6.0 ,</b>and when i check <b>SLIN</b> errors i am getting the following error.
    <b>error:</b>
    <b>Function module STRING_CENTER is flagged as obsolete.
    If you have any queries, contact the author of the function module</b>
    The function Module is:
    <b>CALL FUNCTION 'STRING_CENTER'
      EXPORTING
        STRING          = TEXT_IN
    IMPORTING
       CSTRING         = TEXT_OUT
    EXCEPTIONS
       TOO_SMALL       = 1
       OTHERS          = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.</b>

    Hi,
    C147_STRING_SPLIT_AT_POSITION
    STRING_SPLIT
    STRING_SPLIT_AT_POSITION
    check this sample code
    DATA: text(10) TYPE c VALUE '0123456789',
    text1(6) TYPE c,
    text2(6) TYPE c.
    PARAMETERS position TYPE i.
    CALL FUNCTION 'STRING_SPLIT_AT_POSITION'
    EXPORTING
    string = text
    pos = position
    IMPORTING
    string1 = text1
    string2 = text2
    EXCEPTIONS
    string1_too_small = 1
    string2_too_small = 2
    pos_not_valid = 3
    OTHERS = 4.
    Regards

  • Regarding obselete function modules

    What are replacements for these funciton modules its urgent please reply
    POPUP_TO_CONFIRM_WITH_MESSAGE,
    LOG_SYSTEM_GET_RFC_DESTINATION,
    HELPSCREEN_NA_CREATE

    Hi Naveen,
    'POPUP_TO_CONFIRM_WITH_MESSAGE' is obsolete.
    The replacement FM is 'POPUP_TO_CONFIRM’
    Example:
    CALL FUNCTION 'POPUP_TO_CONFIRM_WITH_MESSAGE'
    EXPORTING
    DIAGNOSETEXT1 = TEXT-900
    DIAGNOSETEXT2 = SY-MSGV1
    DIAGNOSETEXT3 = TEXT-901
    TEXTLINE1 = TEXT-902
    TEXTLINE2 = TEXT-903
    TITEL = TEXT-904
    IMPORTING
    ANSWER = UP_ANSWER.
    The Diagnose object parameter Z_ZIMPCHK1_POPUP_TO_CONFIRM'
    is created in SE61 transaction as DIALOG TEXT object
    DATA: W_PARAM TYPE SPAR,
    I_PARAMETERS TYPE STANDARD TABLE OF SPAR,
    W_TEXT_Q TYPE STRING.
    MOVE TEXT-900 TO W_PARAM-VALUE.
    MOVE 'TEXT1' TO W_PARAM-PARAM.
    APPEND W_PARAM TO I_PARAMETERS.
    WRITE SY-MSGV1 TO W_PARAM-VALUE.
    MOVE 'TEXT2' TO W_PARAM-PARAM.
    APPEND W_PARAM TO I_PARAMETERS.
    WRITE TEXT-901 TO W_PARAM-VALUE.
    MOVE 'TEXT3' TO W_PARAM-PARAM.
    APPEND W_PARAM TO I_PARAMETERS.
    CONCATENATE TEXT-902
    TEXT-903
    INTO
    W_TEXT_Q.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
    EXPORTING
    TITLEBAR = TEXT-904
    DIAGNOSE_OBJECT = 'Z_ZIMPCHK1_POPUP_TO_CONFIRM'
    TEXT_QUESTION = W_TEXT_Q
    IMPORTING
    ANSWER = UP_ANSWER
    TABLES
    PARAMETER = I_PARAMETERS
    EXCEPTIONS
    TEXT_NOT_FOUND = 1
    OTHERS = 2
    IF SY-SUBRC 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    You can try,
    HELP_OBJECT_SHOW
    or
    HELP_OBJECT_SHOW_FOR_FIELD
    as an alternate for
    HELPSCREEN_NA_CREATE
    Also, Check the list of function modules
    [http://www.sap-img.com/abap/function-list.htm]
    [http://www.erpgenie.com/abap/functions.htm]
    Hope it Helps.
    Regards,
    Anita

  • Error while creating a extractor based on Functional Module

    Hi,
    I am building an extactor based on afunction module.I created a DS and created a structure in Se11.When i am trying to put the extract structure in the Tables tab of the function module it gives me an error saying Tables parameters are obselete and doesnt allow me to activate or go back and front to other tabs.Can anyone please tell me what might be the reason?
    Thanks,

    Hi,
            Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
    PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
    Regards
    Sunil

  • Error while creating a function module

    Hii Experts
    I am adding a table name to the tables parameter in a already created function module, But it is giving a error : TABLES parameter is obselete
    the table which I am adding is
    IT_GRAPH  TYPE  ZTY_GRAPH ( zty_graph is a structure which i made in se11 comprising of 2 fields)
    Thanx in advance

    Hi,
    Give table parameters as:
    IT_GRAPH LIKE ZTY_GRAPH,
    It will give a warning, just press enter and proceed.
    Thanks & Regards,
    Navneeth K.

  • Function module in ECC 6.0

    Hi Experts ,
          I have an issue in using Function module  in ECC 6.0 , while passing data in table parameter is showing an error as ' Table parameter is obselete'. Can u please suggest any other way of passing   table in function module.
    <removed_by_moderator>
    Edited by: Julius Bussche on Oct 20, 2008 10:35 AM

    use table types:
    types: ty_struc type ...,
           ty_tab type standard table of ty_struc.
    data: it_tab type ty_tab.
    call function ...
      changing it_tab
    Don't use TABLES parameters any more, they have implicit header lines, which is a no-no in ABAP Objects context.
    Thomas

  • Regarding the obsolute function modules

    Hi All,
    below function module are obsolute in 4.6c ,what are the new function modules in ECC 6.0.
    1.GRAPH_RECEIVE
    2.GRAPH_SET_CUA_STATUS
    already i search in sdn but i didnt get exact answer................
    plz help me.....
    Regards,
    Madhu

    Hi
    Though these function modules are set to obsolete,they are still maintained and supported by SAP and can be used in your application further.  They are set as obsolete in order to avoid the usage in new development projects.       When starting new developments it is recommended to use class 'cl_gui_chart_engine' .
    Hope this is helpful.

  • Function module Registry_get

    Hi All,
    We are going for upgrade from 4.6 to ECC 6.0.Function module REGISTRY_GET is obselete in 4.6 instead of this i have used class CL_GUI_FRONTEND_SERVICES method 'registry_get_value' .But the there is a diffrence in number of parameter passed in function module and that class method.Below is the code both in 4.6 and ECC 6.0.
    In 4.6 it was as below:
    CALL FUNCTION 'REGISTRY_GET'
          EXPORTING
               KEY     = 'protocol\StdFileEditing\server'
               SECTION = 'ExcelWorksheet'
          IMPORTING
               VALUE   = EXCEL_PATH.
    Now in ECC 6.0 i replaced as below:
    call method cl_gui_frontend_services=>registry_get_value
        exporting
          root                = cl_gui_frontend_services=>hkey_classes_root
          key                 = 'protocol\StdFileEditing\server'
          value               = ''
        importing
          reg_value           = reg_value
        exceptions
          get_regvalue_failed = 1
          cntl_error          = 2
          error_no_gui        = 3
          others              = 4.
    If i compair both the code then parameters differ's.But i am not able to undestand what the use of these parameter.Please sugest if i am doing the right thing in ECC6.0 and please also let me know the replacement of function module 'Profile_GET' used as below in 4.6:
    call function 'PROFILE_GET'
           exporting
                filename = 'front.ini'
                key      = 'Path'
                section  = 'Filetransfer'
           importing
                value    = dir_path
           exceptions
                others   = 1.
    Thanks
    Mohit

    Sample to understand :
    Code 46C
    *     Test, ob OrgPublisher lokal installiert ist
          CALL FUNCTION 'REGISTRY_GET'
               EXPORTING
                    key     = 'CLSID'
                    section = 'OrgPublisher.Document.2'
               IMPORTING
                    value   = class_id.
          IF class_id IS INITIAL.
    Code ECC 6.0
          CALL METHOD cl_gui_frontend_services=>registry_get_value
            EXPORTING
              root         = cl_gui_frontend_services=>hkey_classes_root
              key          = 'OrgPublisher.Document.2\CLSID'
            IMPORTING
              reg_value            = class_id
            EXCEPTIONS
              get_regvalue_failed  = 1
              cntl_error           = 2
              error_no_gui         = 3
              not_supported_by_gui = 4
              OTHERS               = 5.
          CALL METHOD cl_gui_cfw=>flush
            EXCEPTIONS
              cntl_system_error = 1
              cntl_error        = 2
              OTHERS            = 3.
          IF class_id IS INITIAL OR sy-subrc NE 0.
    Regards,
    Raymond

  • Function module CARD_CHARACTERISTIC_READ

    Hi All,
    We are going upgrade from 4.6 to ECC 6.0 where function module CARD_CHARACTERISTIC_READ is obselete now,below is the code used in 4.6
    call function 'CARD_CHARACTERISTIC_READ'
        exporting
       characteristic                     = 'Z001GD_PRIMARY_SELLING_SEASON'
        tables
          descriptions                       = i_dumdesc
          allowed_values                     = i_dumaval
          value_descriptions                 = i_valdesc
          restrict_usage_in_class_type       = i_dumrest
          reference_to_table                 = i_dumreft
       exceptions
         warning                            = 1
         error                              = 2
         others                             = 3
    Could you please tell me the replacment of this function module with an example that use same parameter.
    Thanks ,
    Mohit

    Hi All,
    Any help on this issue.
    Thanks
    Mohit

  • Regarding replacement of function module 'GUI_GET_DESKTOP_INFO'

    what function module is replaced by obselete function module 'GUI_GET_DESKTOP_INFO'

    Hi Naveenkumar,
    For differenct fucntions specified in obselete FM
    1:  Host name (host name of current system) -- CL_GUI_FRONTEND_SERVICES=>GET_IP_ADDRESS
    CL_GUI_FRONTEND_SERVICES=>GET_COMPUTER_NAME
    2:  Windows directory -- CL_GUI_FRONTEND_SERVICES=>GET_WINDOWS_DIRECTORY
    3:  System directory -- CL_GUI_FRONTEND_SERVICES=>GET_SYSTEM_DIRECTORY
    4:  Temp. directory -- CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
    5:  Domain user name -- CL_GUI_FRONTEND_SERVICES=>GET_USER_NAME
    6:  Platform -- use CL_GUI_FRONTEND_SERVICES=>GET_PLATFORM
    7:  Windows build number
    8:  Windows version
    9:  Program name
    10: Program path
    11: Current directory (Directory for current process) --
    CL_GUI_FRONTEND_SERVICES=>GET_SAPGUI_WORKDIR
    Regards,
    Mohaiyuddin

  • URGENT: Function modules or BAPIs

    Hi Experts,
    I need function modules or BAPI to get the open items and cleared items G/L Account wise.
    Useful replies will be surely awarded.

    Hi Chakradhar,
    Check tcode : BAPI
    u will get all bapis there.
    Regards,
    Hemant

  • How to attached class or function module in FD03

    Hi Guys
    I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
    regards
    Piroz
    report zfir_aged_debtors no standard page heading
                             line-size 255.
    Type group
    type-pools:
      slis.                        " ALV types
    Tables
    tables:
      adrc,               " Addresses
      bsad,               " Accounting: Customer secondary index (Cleared)
      bsid,               " Accounting: Customer secondary index (Open)
      kna1,               " Customer master: General data
      knkk,               " Customer master: Credit management
      knvk.               " Customer master: Contact persons
    Types
    types:
      begin of ty_bsadbsid,
        bukrs like bsad-bukrs,              " Company code
        kunnr like bsad-kunnr,              " Customer
        gjahr like bsad-gjahr,              " Fiscal year
        belnr like bsad-belnr,              " Accounting document number
        buzei like bsad-buzei,              " Line item
        budat like bsad-budat,              " Posting date
        bldat like bsad-bldat,              " Document date
        waers like bsad-waers,              " Currency
        xblnr like bsad-xblnr,              " Reference
        shkzg like bsad-shkzg,              " Debit/credit indicator
        dmbtr like bsad-dmbtr,              " Amount
        zfbdt like bsad-zfbdt,              " Baseline date for due date
                                            " calculation
        zbd1t like bsad-zbd1t,              " Cash discount days 1
        zbd2t like bsad-zbd2t,              " Cash discount days 2
        zbd3t like bsad-zbd3t,              " Net payment terms period
        rebzg like bsad-rebzg,              " Number of the invoice
        rebzt like bsad-rebzt,              " Follow on document type
      end of ty_bsadbsid,
      ty_it_bsadbsid type ty_bsadbsid occurs 0,
      begin of ty_merged,
        kunnr      like kna1-kunnr,         " Customer number
        name1      like adrc-name1,         " Name
        city1      like adrc-city1,         " City
        post_code1 like adrc-post_code1,    " Post code
        street     like adrc-street,        " Street
        house_num1 like adrc-house_num1,    " House number
        tel_number like adrc-tel_number,    " Telephone number
        fax_number like adrc-fax_number,    " Fax number
        namev      like knvk-namev,         " First name
        namew      like knvk-name1,         " Last name
        telf1      like knvk-telf1,         " Telephone number
        klimk      like knkk-klimk,         " Credit limit
        skfor      like knkk-skfor,         " Total receivables
        total      like bsad-dmbtr,         " Total amount
        rast1      like bsad-dmbtr,         " Amount period 1
        rast2      like bsad-dmbtr,         " Amount period 2
        rast3      like bsad-dmbtr,         " Amount period 3
        rast4      like bsad-dmbtr,         " Amount period 4
        rast5      like bsad-dmbtr,         " Amount period 5
        rast6      like bsad-dmbtr,         " Amount period 6
      end of ty_merged,
      ty_it_merged type ty_merged occurs 0.
    Internal tables
    data:
    Internal table to store customer line items from BSAD and BSID
      it_bsadbsid type ty_it_bsadbsid,
    Internal table to store field catalog for ALV function call
      it_fieldcat type slis_t_fieldcat_alv,
    Internal table to store summarised data for report output
      it_merged   type ty_it_merged.
    Structures
    data:
    Display variant structures
      st_tvariant  like disvariant,
      st_variant   like disvariant.
    Constants
    constants:
      co_delim_dash    type c
                       value '-',
      co_false         type c                      " False
                       value space,
      co_koart_d       like faede-koart            " Customer account type
                       value 'D',
      co_save_u        type c                      " User display variant
                       value 'U',                  " saving allowed.
      co_shkzg_h       like bsid-shkzg             " Debit/Credit indicator
                       value 'H',                  " for credit
      co_shkzg_s       like bsid-shkzg             " Debit/Credit indicator
                       value 'S',                  " for debit
      co_selected      type c                      " Value of selected radio
                       value 'X',                  " button or checkbox
      co_true          type c                      " True
                       value co_selected.
    Variables
    data:
      va_exit          type c.
    Selection screen definition
    selection-screen: begin of block b1 with frame title text-001.
    select-options:
      s_kunnr for bsad-kunnr.                     " Customer number
    parameters:
      p_kkber like knkk-kkber,                    " Credit control area
      p_pafkt like knvk-pafkt,                    " Contact function
      p_datum like sy-datum.                      " Report date
    selection-screen: begin of line,
                      comment 01(30) text-006,
                      position pos_low.
    parameters:
      rastbis1 like rfpdo1-allgrogr               " Due date sorted 1
               default '000',
      rastbis2 like rfpdo1-allgrogr               " Due date sorted 2
               default '000',
      rastbis3 like rfpdo1-allgrogr               " Due date sorted 3
               default '000',
      rastbis4 like rfpdo1-allgrogr               " Due date sorted 4
               default '000',
      rastbis5 like rfpdo1-allgrogr               " Due date sorted 5
               default '000'.
    selection-screen: end of line.
    selection-screen: end of block b1,
                      begin of block b2 with frame title text-002.
    parameters:
      p_varint like disvariant-variant.           " Display variant.
    selection-screen: end of block b2.
    Initialisation
    initialization.
    Provide default periods for due date sorted list.
      rastbis1 = 0.
      rastbis2 = 30.
      rastbis3 = 60.
      rastbis4 = 90.
      rastbis5 = 120.
    Default report date to current.
      p_datum = sy-datlo.
    Default credit control area to BP01.
      p_kkber = 'BP01'.
    At selection screen on value request for
    at selection-screen on value-request for p_varint.
    Provide display variant list for this program.
      call function 'REUSE_ALV_VARIANT_F4'
        exporting
          is_variant = st_variant
          i_save     = co_save_u
        importing
          e_exit     = va_exit
          es_variant = st_tvariant
        exceptions
          not_found  = 2.
      if sy-subrc eq 2.
        message id sy-msgid type 'S'
                number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else.
        if va_exit eq space.
          st_variant = st_tvariant.
          p_varint = st_tvariant-variant.
        endif.
      endif.
    At selection screen
    at selection-screen.
    Load display variant.
      if not p_varint is initial.
        move st_variant to st_tvariant.
        move p_varint to st_tvariant-variant.
        call function 'REUSE_ALV_VARIANT_EXISTENCE'
          exporting
            i_save     = co_save_u
          changing
            cs_variant = st_tvariant.
        st_variant = st_tvariant.
      else.
        clear st_variant.
        st_variant-report = sy-repid.
      endif.
      if p_kkber is initial.
      Ensure credit control area is specified.
        message e000(zgen) with 'Credit control area must be specified'.
      endif.
      if p_pafkt is initial.
      Ensure contact person function is specified.
        message e000(zgen) with 'Contact person function must be specified'.
      endif.
    Start of selection
    start-of-selection.
    Extract open customer items from BSID
      select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
             dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
             from  bsid
             into  table it_bsadbsid
             where kunnr in s_kunnr
             and   budat le p_datum.
    Extracct cleared customer items from BSAD
      select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
             dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
             from  bsad
             appending table it_bsadbsid
             where kunnr in s_kunnr
             and   budat le p_datum
             and   augdt ge p_datum.
    Ensure that items were not selected twice while getting data from the
    open and cleared items tables (Only if transaction occured during
    report run).
      sort it_bsadbsid by bukrs belnr gjahr buzei.
      delete adjacent duplicates from it_bsadbsid
             comparing bukrs belnr gjahr buzei.
      if it_bsadbsid[] is initial.
      No data found for selection
        message s001(zgen).
        exit.
      endif.
    Merge data for report output
      perform merge_data tables it_bsadbsid
                                it_merged.
    Build field catalog
      perform build_field_catalog tables it_fieldcat.
    Output report via ALV
      perform output_report_via_alv tables it_fieldcat
                                           it_merged.
    *&      Form  merge_data
          text
    form merge_data  tables   pa_it_bsadbsid type ty_it_bsadbsid
                              pa_it_merged   type ty_it_merged.
    Local work areas
    data:
      lwa_bsadbsid type ty_bsadbsid,
      lwa_merged   type ty_merged.
    Local structures
    data:
      lst_faede    like faede.
    Local variables
    data:
      lva_daysover type i,
      lva_merged_tabix like sy-tabix.
      loop at pa_it_bsadbsid into lwa_bsadbsid.
      Lookup merged entry for customer
        clear lwa_merged.
        read table pa_it_merged into lwa_merged
                                with key kunnr = lwa_bsadbsid-kunnr
                                binary search.
        lva_merged_tabix = sy-tabix.
        if sy-subrc ne 0.
        Create new merged record for customer
          lwa_merged-kunnr = lwa_bsadbsid-kunnr.
        Get customer details from KNA1
          clear kna1.
          select single *
                 from   kna1
                 where  kunnr eq lwa_bsadbsid-kunnr.
        Get customer address details from ADRC
          clear adrc.
          select single *
                 from   adrc
                 where  addrnumber eq kna1-adrnr
                 and    date_from  le p_datum.
          lwa_merged-name1      = adrc-name1.
          lwa_merged-city1      = adrc-city1.
          lwa_merged-post_code1 = adrc-post_code1.
          lwa_merged-street     = adrc-street.
          lwa_merged-house_num1 = adrc-house_num1.
          lwa_merged-tel_number = adrc-tel_number.
          lwa_merged-fax_number = adrc-fax_number.
        Get credit limit details from KNKK
          clear knkk.
          select single *
                 from   knkk
                 where  kunnr eq lwa_bsadbsid-kunnr
                 and    kkber eq p_kkber.
          lwa_merged-klimk = knkk-klimk.
          lwa_merged-skfor = knkk-skfor.
        Get customer contact person details from KNVK
          clear knvk.
          select single *
                 from   knvk
                 where  kunnr eq lwa_bsadbsid-kunnr
                 and    pafkt eq p_pafkt.
          lwa_merged-namev = knvk-namev.
          lwa_merged-namew = knvk-name1.
          lwa_merged-telf1 = knvk-telf1.
          insert lwa_merged into pa_it_merged index lva_merged_tabix.
        endif.
      Interpret debit/credit indicator
        case lwa_bsadbsid-shkzg.
          when co_shkzg_h.
          Credit
            lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
          when co_shkzg_s.
          Debit
        endcase.
      Perform ageing
        clear lst_faede.
        move-corresponding lwa_bsadbsid to lst_faede.
        lst_faede-koart = co_koart_d.
        call function 'DETERMINE_DUE_DATE'
          exporting
            i_faede = lst_faede
          importing
            e_faede = lst_faede
          exceptions
            others  = 1.
        lva_daysover = p_datum - lst_faede-netdt.
      Accumulate total.
        add lwa_bsadbsid-dmbtr to lwa_merged-total.
        if lva_daysover le rastbis1.
          add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
        else.
          if lva_daysover le rastbis2 or
             rastbis3 is initial.
            add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
          else.
            if lva_daysover le rastbis3 or
               rastbis4 is initial.
              add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
            else.
              if lva_daysover le rastbis4 or
                 rastbis5 is initial.
                add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
              else.
                if lva_daysover le rastbis5.
                  add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
                else.
                  add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
                endif.
              endif.
            endif.
          endif.
        endif.
      Update the merged record
        modify pa_it_merged from lwa_merged index lva_merged_tabix.
      endloop.
    endform.                    " merge_data
    *&      Form  build_field_catalog
          text
    form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
    Local work areas
      data:
        lwa_fieldcat   type slis_fieldcat_alv.
    --WG1K903216: Start Insert-
      data: v_datum type datum,
            v_mdmth type datum,
            v_datxt type string,
            v_noday type i.
    --WG1K903216: End Insert---
      refresh pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'KUNNR'.
      lwa_fieldcat-ref_tabname   = 'KNA1'.
      lwa_fieldcat-ref_fieldname = 'KUNNR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '1'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAME1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'NAME1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '2'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'CITY1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'CITY1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '3'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'POST_CODE1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '4'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'STREET'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'STREET'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '5'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'HOUSE_NUM1'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '6'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TEL_NUMBER'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '7'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'FAX_NUMBER'.
      lwa_fieldcat-ref_tabname   = 'ADRC'.
      lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '8'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAMEV'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'NAMEV'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '9'.
      lwa_fieldcat-seltext_l     = 'Contact first name'.
      lwa_fieldcat-seltext_m     = 'Contact Fname'.
      lwa_fieldcat-seltext_s     = 'Ctct Fname'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'NAMEW'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'NAME1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '10'.
      lwa_fieldcat-seltext_l     = 'Contact last name'.
      lwa_fieldcat-seltext_m     = 'Contact Lname'.
      lwa_fieldcat-seltext_s     = 'Ctxt Lname'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TELF1'.
      lwa_fieldcat-ref_tabname   = 'KNVK'.
      lwa_fieldcat-ref_fieldname = 'TELF1'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '11'.
      lwa_fieldcat-seltext_l     = 'Contact phone no.'.
      lwa_fieldcat-seltext_m     = 'Contact phone'.
      lwa_fieldcat-seltext_s     = 'Ctct Phne'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'KLIMK'.
      lwa_fieldcat-ref_tabname   = 'KNKK'.
      lwa_fieldcat-ref_fieldname = 'KLIMK'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '12'.
      lwa_fieldcat-seltext_l     = 'Credit limit'.
      lwa_fieldcat-seltext_m     = 'Credit limit'.
      lwa_fieldcat-seltext_s     = 'Crdt limit'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'SKFOR'.
      lwa_fieldcat-ref_tabname   = 'KNKK'.
      lwa_fieldcat-ref_fieldname = 'SKFOR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '13'.
      lwa_fieldcat-seltext_l     = 'Credit used'.
      lwa_fieldcat-seltext_m     = 'Credit used'.
      lwa_fieldcat-seltext_s     = 'Crdt used'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'TOTAL'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '14'.
      lwa_fieldcat-seltext_l     = 'Total'.
      lwa_fieldcat-seltext_m     = 'Total'.
      lwa_fieldcat-seltext_s     = 'Total'.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST1'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '15'.
    --WG1K903216: Start Delete-
    concatenate '<'
                 rastbis2
                 into lwa_fieldcat-seltext_l
                 separated by space.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis2.
    Always use the middle of the report month as a heading reference date.
      concatenate p_datum+0(6) '15' into v_mdmth.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '+'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST2'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '16'.
    --WG1K903216: Start Delete-
    concatenate rastbis1
                 rastbis2
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis1.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '+'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST3'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '17'.
    --WG1K903216: Start Delete-
    concatenate rastbis2
                 rastbis3
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis2.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST4'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '18'.
    --WG1K903216: Start Delete-
    concatenate rastbis3
                 rastbis4
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis3.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST5'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '19'.
    --WG1K903216: Start Delete-
    concatenate rastbis4
                 rastbis5
                 into lwa_fieldcat-seltext_l
                 separated by co_delim_dash.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis4.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
      clear lwa_fieldcat.
      lwa_fieldcat-tabname       = 'PA_IT_MERGED'.
      lwa_fieldcat-fieldname     = 'RAST6'.
      lwa_fieldcat-ref_tabname   = 'BSAD'.
      lwa_fieldcat-ref_fieldname = 'DMBTR'.
      lwa_fieldcat-row_pos       = '1'.
      lwa_fieldcat-col_pos       = '20'.
    --WG1K903216: Start Delete-
    concatenate '>'
                 rastbis5
                 into lwa_fieldcat-seltext_l
                 separated by space.
    --WG1K903216: End Delete---
    --WG1K903216: Start Insert-
      clear: v_datum,
             v_datxt.
      v_noday = rastbis5.
      call function 'ZWAG_DATE_CALCULATOR'
        exporting  i_datum         = v_mdmth
                   i_noday         = v_noday
                   i_oprnd         = '-'
        importing  e_datum         = v_datum
        exceptions invalid_operand = 1.
      call function 'ZWAG_END_MONTH'
        exporting  i_datum         = v_datum
        importing  e_datum         = v_datum
                   e_datxt         = v_datxt
        exceptions invalid_date    = 1.
      concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
        separated by space.
    --WG1K903216: End Insert---
      lwa_fieldcat-seltext_m     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-seltext_s     = lwa_fieldcat-seltext_l.
      lwa_fieldcat-ddictxt       = 'L'.
      append lwa_fieldcat to pa_it_fieldcat.
    endform.                    " build_field_catalog
    *&      Form  output_report_via_alv
          text
    form output_report_via_alv
                        tables pa_it_fieldcat type slis_t_fieldcat_alv
                               pa_it_merged   type ty_it_merged.
    Local variables
      data:
        lva_repid    like sy-repid,
        lva_formname type slis_formname.
      lva_repid = sy-repid.
      lva_formname = 'USER_COMMAND'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program      = lva_repid
          i_callback_user_command = lva_formname
          i_save                  = 'A'
          is_variant              = st_variant
          it_fieldcat             = pa_it_fieldcat[]
        tables
          t_outtab                = pa_it_merged
        exceptions
          program_error           = 1
          others                  = 2.
    endform.                    " output_report_via_alv

    Hi shiva
    Thanks for your help,
    Can you check this coding and revert me back ASAP Please.
    REPORT BDS_GOS_CONNECTION.
    DATA : logical_system LIKE BAPIBDS01-log_system.
           CLASSNAME LIKE BAPIBDS01-CLASSNAME
           OBJKEY LIKE SWOTOBJID-objkey.
    PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
                pa_class like BPIBDS01-CLASSNAME,
                pa_objkey like swotobjidobjkey.
    AT SELECTION-SCREEN.
    CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
             EXPORTING
                  bor_id             = bor_id
             IMPORTING
                  logical_sytem      = pa_lo_sys.
                  classname          = pa_class.
                  objkey            = pa_objkey.
             EXCEPTIONS
                  no_objects_found     = 1
                  internal_error       = 2
                  internal_gos_error   = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    clear v_attno1.
    i_object1-typeid = 'BUS2012'.
    i_object1-catid  = 'BO'.
    i_object1-instid = i_yItem-docno.
    call method cl_gos_attachment_query=>count_for_object
       exporting
        is_object = i_object1
        ip_arl    = space
       receiving
        rt_stat   = i_stat1.
    read table i_stat1 into wa_stat1 index 1.
    if sy-subrc eq c_0.
        move wa_stat1-counter to v_attno1.
    endif.             
    CALL METHOD cl_gos_attachment_query=>count_for_object
    EXPORTING
    is_object = object
    ip_arl =    space
    RECEIVING
    rt_stat = lt_stat.
    READ TABLE lt_stat INDEX 1 into ls_stat.
    count = ls_stat-counter.
    *The object has to be a concatenation of your document, like this:
    CONCATENATE object-instid tab-gjahr INTO object-instid.
    ELSE.
    CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
    object-instid.
    ENDIF.

  • Function Module to Release Scheduled Jobs

    Dear All,
    I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
    Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
    Regards,
    kartik

    Dear Mr. Parupalli,
    That solved my problem. Thank you.
    Regards,
    kartik

  • Call RFC Function Module and return 1000 records at a time

    I would like to call a Remote Enabled Function Module from a non SAP system.  This function module will select data from the database and return it to the calling program.
    Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records.  Therefore the calling program would call the FM 100 times. 
    How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records? 
    Let me know if additional information is needed.
    Thanks,
    Aaron

    Hello,
    Here is how you can go for this issue:
    1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
         Import: Package Size
         Export: Total number of records
         Changing: chunk count
    Implement following logic:
    1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one  
        time activity so you better maintain one flag import parameter will be set to 'X' only first call.
    2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
    3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
        counter value sent from calling program.
    4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
        chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
        with first chunk.
    5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
        chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk  
        counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
    6. Repeat step 4 until you reach last chunk.
    You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
    Hope this helps.
    Thanks,
    Augustin.

Maybe you are looking for

  • Junk mail-why don't I have an option for Is junk mail in messages flag not junk mail

    I have a brown coloured email which has been accurately diagnosed as junk mail, but when I go to Messages>flag>...the only two options I have are "not junk mail" and "mark as unread"  yet in the help support it says that it should have "junk mail" th

  • ABAP trial NW7 SP12: problem with SAPDB

    Hello, I have to reinstall ABAP NetWeaver7 Sp12. After the installation I can't find the c:\sapdb directory. During the first intallation system has intalled SAPDB. Probably I did something wrong durring unistall procedure. After the reinstallation I

  • Calling multidimensional array in JSP into other JSP

    hello friends,      nice to c good replies over here...so i want to post my problem in JSP using multi-dimensional array.. One JSP contains mutli-dimensional array and i want to call this JSP into the other JSP in which i can use the values of that a

  • I can't save tif with jpeg compression method

    Hello, I've trouble to saving image in tif format with jpeg compression method. With the same image this option some times is unavailable, randomly, I don't know how. After some practice I leave that if I open an image previously saved in tif-jpeg th

  • Where is google widget for mountain lion?

    I have upgraded snow leopard to mountain lion and my google widget has disappeared from the dashboard. Where is it and how gan I reinstate it?