Is Grid Control 10.2.0.5 Supported on Solaris x86?

Hi There,
I went on the oracle website to download the full installer version 10.2.0.1 (Including Agent, Repository, OMS, and Management Packs) and the Patch Installer version 10.2.0.5 (Including Agent, OMS, and Management Packs) for SOLARIS X86, however, it was not there. Is this OS supported for this version?
http://www.oracle.com/technology/software/products/oem/index.html
Thanks,
J

user560159 wrote:
Hi There,
I went on the oracle website to download the full installer version 10.2.0.1 (Including Agent, Repository, OMS, and Management Packs) and the Patch Installer version 10.2.0.5 (Including Agent, OMS, and Management Packs) for SOLARIS X86, however, it was not there. Is this OS supported for this version?
http://www.oracle.com/technology/software/products/oem/index.html
No.. Its not certified on Salaris X86.
Please read
Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
Regards
Rajesh

Similar Messages

  • Release Date of EM Grid Control 10.2 for HP-UX and Solaris?

    Hello,
    does anybody know the estimated release date of EM Grid Control 10.2 for HP-UX and Solaris?
    Regards,
    Martin

    We are also very curious about that here. If anyone has any information or estimates it would be much appreciated.
    We've ran into the following problem:
    Note 338123.1 After Upgrading Catalog Database to 10.2 Cannot Use RMAN Catalog With 10.1 Grid Control
    And have been told we have the following options:
    Workarounds available:
    1. Use dbcontrol for the 10.2 database to maintain the recovery catalog until 10.2 Grid Control is available
    2. Use the RMAN command line utility
    3. Use the 10.2 Management Agent when available.
    Which basically means we are out of luck on OEM RMAN until 10.2, and hope to hear it may be available in the near future.

  • NSAPI support on Solaris/x86

    Are there plans to provide NSAPI support on Solaris/Intel platform.
    Best regards
    /Johan
    Johan Holling
    [email protected]

    Not yet. But when the Linux port comes out for version 6.0 in just a few
    weeks, we will.
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    "Johan Holling" <[email protected]> wrote in message
    news:[email protected]..
    Thanks,
    Do you support NSAPI or Apache plugin on Linux for WLS 6.0 (could not
    find it in the "BEA WebLogic Server Platform Support" document)?
    Best regards
    /Johan
    Michael Girdley wrote:
    No, no plans at the current time. We do support Linux.
    The platform support page for WebLogic Server is located at:
    http://www.weblogic.com/platforms/index.html
    This page has the latest and greatest information on the platforms that
    WebLogic is certified and supported on.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    "Johan Holling" <[email protected]> wrote in message
    news:[email protected]..
    Are there plans to provide NSAPI support on Solaris/Intel platform.
    Best regards
    /Johan
    Johan Holling
    [email protected]

  • Grid Control showing excessive amount of disk utilization.

    Hi Folks,
    I understand that Oracle doesn't support their products 100% on non Oracle VMs, but I thought I might take a stab at it.
    I decided to stick with a simple installation of Oracle Grid Control running on a Windows 2003 R2 32 bit os, here are the steps I took.
    1. Run Guest OS Windows 2003 R2 32 bit on a Windows 2008 x64 running Hyper-V (Yes I know why not EL5 running XEN, long story)
    2. Install Grid Control with Database and Agent versions 10.2.0.2.1
    3. Patch agent and oms to 10.2.0.5.0
    4. Some minor issues, but managed to get by those.
    - First off EM Website shows down, got to take a look at that, probably need to fix the beacon, not sure!
    Problem:
    - Grid shows that the host running em is over 100% disk utilization.
    - According to Metalink this is a known bug in Windows 2000 Performance Counters (not 2003?)
    - More specially Microsoft KB article Q310067.
    - Metalink Doc Id: 303788.1
    - Note, I'm running 2003 on a Hyper-V Guest, so anything can go wrong!
    The specific error is:
    Metric               Disk Device Busy (%)
    Disk Device               0 C:
    Severity               Critical
    Alert Triggered          Jun 3, 2009 7:57:54 PM
    Last Updated          Jun 4, 2009 3:48:48 PM
    Acknowledged          No
    Acknowledged By     n/a
    Message               Disk Utilization for 0 C: is 587.86%, crossed warning (80) or critical (95) threshold.
    More info:
    - Guest is running on a Dual Quad Core Xeon System with 16 GB of RAM
    - Guest has dedicated 4096MB of ram
    - Guest has dedicated 2 CPUS
    - Guest is configured with a Virtual Disk (specifically partition c:\) to be on local Hyper-V disk array
    - Windows 2008 Hyper-V host disk array is in a RAID 5 configuration running 10k SAS drives
    - Windows 2008 Hyper-V host utilization is literary at most 5% (current is 1%)
    - Windows 2008 Hyper-V disk utilization according to graphs is showing 100KB/s usage (less than 1%)
    Temporary solution is to turn off the metric, but not sure if that's such a good idea.
    - Note that 11g EM and 10g EM running on Hyper-V server had the same issue.
    - Note that 11g EM and 10g EM running without visualization had no issues.
    Any thoughts?

    It may be related to Bug 8677212: BACKUP INFORMATION FOR SOME DATABASES SHOWS INCORRECTLY
    Although bug info says it for HP-UX, I've also seen the same problem on Grid Control 10.2.0.5 running on Solaris.
    You may want to apply 10.2.0.5.4 Grid Control Patch Set Update (PSU) [ID 1139563.1] to fix it.
    Best Regards,
    Gokhan Atil
    If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

  • Cannot access Grid Control URL after installation

    I have installed Oracle Grid Control 11.1.0.1.0 for Linux x86-64 (64-bit). I can't access below URL
    1. Enterprise Manager Grid Control URL: https://ccoshs02xvoem01.ccosvc.com:7799/em
    2. Admin Server URL: https://ccoshs02xvoem01.ccosvc.com:7101/console
    [oracle@ccoshs02xvoem01 oracle]$ $OMS_HOME/bin/emctl start oms
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server Already Started
    Oracle Management Server is Up
    [root@ccoshs02xvoem01 ~]# netstat -anp | grep 799
    tcp 0 0 :::7799 :::* LISTEN 26461/httpd.worker
    [root@ccoshs02xvoem01 ~]# netstat -anp | grep 7101
    tcp 0 0 ::ffff:172.30.1.31:7101 :::* LISTEN 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53507 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:54364 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:54364 ::ffff:172.30.1.31:7101 ESTABLISHED 22561/emagent
    tcp 0 0 ::ffff:172.30.1.31:53507 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:53496 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:53487 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53496 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53487 ESTABLISHED 18452/java
    Please can I know what needs to be done to access Grid Control.

    weblogic.management.ManagementException: Unable to obtain lock on /u01/app/oracle/Middleware/oms11g/user_projects/domains/GCDomain/servers/EMGC_ADMINSERVER/tmp/EMGC_ADMINSERVER.lok. Server may already be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:73)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
    at weblogic.Server.main(Server.java:67)
    >
    <Feb 1, 2011 2:49:22 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Feb 1, 2011 2:49:22 PM GMT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Feb 1, 2011 2:49:22 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Do I need to reboot the server.
    I have restart OMS

  • Cannot access Grid control after installation

    I have installed Oracle Grid Control 11.1.0.1.0 for Linux x86-64 (64-bit). I can't access below URL
         1. Enterprise Manager Grid Control URL: https://ccoshs02xvoem01.ccosvc.com:7799/em
         2. Admin Server URL: https://ccoshs02xvoem01.ccosvc.com:7101/console
    [oracle@ccoshs02xvoem01 oracle]$ $OMS_HOME/bin/emctl start oms
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server Already Started
    Oracle Management Server is Up
    [root@ccoshs02xvoem01 ~]# netstat -anp | grep 799
    tcp 0 0 :::7799 :::* LISTEN 26461/httpd.worker
    [root@ccoshs02xvoem01 ~]# netstat -anp | grep 7101
    tcp 0 0 ::ffff:172.30.1.31:7101 :::* LISTEN 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53507 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:54364 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:54364 ::ffff:172.30.1.31:7101 ESTABLISHED 22561/emagent
    tcp 0 0 ::ffff:172.30.1.31:53507 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:53496 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:53487 ::ffff:172.30.1.31:7101 ESTABLISHED 20994/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53496 ESTABLISHED 18452/java
    tcp 0 0 ::ffff:172.30.1.31:7101 ::ffff:172.30.1.31:53487 ESTABLISHED 18452/java
    Please can I know what needs to be done to access Grid Control.

    Hi ,
    Try to restart your service by following the below order mentioned in the link.Hope it should work.First stop all services and start them.
    http://rafioracledba.blogspot.com/
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • EM10gR2 Grid Control / Change Management Pack does not support TYPE objects

    I wonder any Oracle EM10gR2 Grid Control users, implementing Oracle Change Management Pack, have used it for the release and proper packages management.
    Issue1 - On an EM console / Web GUI the DDL comparison and synchronization is not supported at all. Implementing it @ customer it appeared that we have to install a 10g Java Client in order to use the code comparison and sync functionalities.
    Issue2 - and this is more serious - it appears that even with Java client in use, you cannot compare or sync objects related to TYPE or TYPE BODY data types. The comparison simply hangs.
    Asked help from support, they mentioned an ER from 8i and logged a new ER for 10g/11g. That is surprising especially as the doc (http://download.oracle.com/docs/html/A96679_01/toc.htm) about code comparison does not exclude the TYPE objects from the supported options.
    Any fellow DBA running to a same problem? What solutions & recommendations might you have?

    Hi Mugunthan,
    Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
    Thanks,
    Gareth

  • Grid Control Support for Tripwire

    Does Oracle EM GridControl support Tripwire?
    Do we need a seperate licence from oracle and how to configure Grid control to support Tripwire?
    Any refrence link is much appreciated..

    this is what i have now.
    i have a system with grid control and database server
    as version 10.1.0
    now i am installing in a new system oracle database
    server version 10.2.0. and i want to link this 10.2.0
    with the existing grid control. will this work?Yes. Just discover your new 10..2.0 database using the 10.1.0 Grid Control.
    >
    will it be a good idea to upgrade the database server
    and the grid control in the old system from 10.1.0
    to 10.2.0 version?
    Good idea to read all the release notes and compatibility section that come with you version. It is not a good idea to guess (unless it is a small test system). On my test PC, I upgraded repository to 10.2.0.1.0 and left Grid Control as 10.1.0.3. It works fine.

  • Where in the 12c grid control that it supports 11r2 database.  Thanks

    Where in the 12c grid control that it supports 11r2 database.  Thanks

    Yes 11gR2 databases are supported for 12c.
    11.2.0.4.0,11.2.0.3.0,11.2.0.2.0,11.2.0.1.0
    Going forward you can check the certifications matrix information for OEM by following,
    Login into My Oracle Support page > Click on Certifications tab >
    Choose [Enterprise Manager Base Platform - OMS] or [Enterprise Manager Base Platform - Agent]
    Select the Release [12.1.0.2]
    Press Search Button.
    Refer the following Enterprise Manager Certification Matrix document:
    How to Find Certification Information for Enterprise Manager Grid Control and Enterprise Manager Cloud Control (Note 1402255.1)
    Understanding Enterprise Manager Certification (Certify) in My Oracle Support [Note 406906.1]
    HTH
    Mani

  • Want Access Data Grid control in SharePoint 2013?

    Hello everyone!
    Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
    Now, if you try to create a sub site under a publishing site, and use the
    Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
    error:
    The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
    a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
    If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
    Using PowerShell, we can see that both Publishing Portal and
    Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
    Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
    Want to try it out and let me know if that happens to your SharePoint too?

    Hi Conway,
    I tested the issue in my environment per your description and it returned the results as below:
    I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
    I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
    It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
    http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Atempt to start OMS for Grid Control 11g fails with - Unexpected error occu

    Hello,
    I am running Grid Control 11g.
    Repository DB is 11.2.0.1
    Both the Grid Control and DB server are running in same machine - redhat 5.
    When trying to start the oms, this fails with the below error:
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is not functioning because of the following reason:
    Unexpected error occurred. Check error and log files.
    The emctl.log shows the following error which I am unable to debug:
    2011-09-13 11:20:05,619 [main] DEBUG oms.StatusOMSCmd processStatusOMS.138 - HTTP port in emgc property file: 7202
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.139 - HTTPS port in emgc property file: 7301
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to http://<host>.<domain>:7202/em/console/logon/logon
    2011-09-13 11:23:05,596 [main] ERROR oms.StatusOMSCmd processStatusOMS.239 - Read timed out
    java.net.SocketTimeoutException: Read timed out
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    at HTTPClient.BufferedInputStream.fillBuff(BufferedInputStream.java:206)
    at HTTPClient.BufferedInputStream.read(BufferedInputStream.java:126)
    at HTTPClient.StreamDemultiplexor.read(StreamDemultiplexor.java:348)
    at HTTPClient.RespInputStream.read(RespInputStream.java:147)
    at HTTPClient.RespInputStream.read(RespInputStream.java:108)
    at HTTPClient.Response.readResponseHeaders(Response.java:1107)
    at HTTPClient.Response.getHeaders(Response.java:832)
    at HTTPClient.Response.getStatusCode(Response.java:331)
    at HTTPClient.RetryModule.responsePhase1Handler(RetryModule.java:92)
    at HTTPClient.HTTPResponse.handleResponseImpl(HTTPResponse.java:872)
    at HTTPClient.HTTPResponse.access$000(HTTPResponse.java:62)
    at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:839)
    at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:837)
    at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:666)
    at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:837)
    at HTTPClient.HTTPResponse.getStatusCode(HTTPResponse.java:242)
    at oracle.sysman.emctl.oms.StatusOMSCmd.processStatusOMS(StatusOMSCmd.java:199)
    at oracle.sysman.emctl.wls.OMSController.statusOMS(OMSController.java:867)
    at oracle.sysman.emctl.wls.OMSController.startOMS(OMSController.java:606)
    at oracle.sysman.emctl.wls.OMSController.main(OMSController.java:213)
    2011-09-13 11:23:05,597 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 9
    In emgc.properties, I have MSPORT=7202.
    I have used the notes in Metalink 1287904.1, but without resolution.
    I am able to connect with sqlplus, with user sysman, without issues. There are no invalid objects under sysman.
    emoms.trc shows the following:
    2011-09-11 15:51:53,160 [JobWorker 22356:Thread-108] WARN jdbc.ConnectionCache _getConnection.353 - Invalid or Stale Connection found in the Connection Cache
    java.sql.SQLException: Invalid or Stale Connection found in the Connection Cache
    Thank you for support.
    Regards,
    Horia
    Edited by: horia.berca on Sep 13, 2011 5:29 AM
    Edited by: horia.berca on Sep 13, 2011 5:32 AM
    Edited by: horia.berca on Sep 13, 2011 5:35 AM
    Edited by: horia.berca on Sep 13, 2011 5:45 AM

    Hello again;
    Check the solution in this: ( and note the multiple versions of oracle it covers )
    UNABLE TO FIND GRID INFRASTRUCTURE LISTENER (Doc ID 1483234.1)
    Best Regards
    mseberg

  • SSO and EUS with EM Grid Control

    Trying to configure both SSO using client certificate authentication process and Enterprise Users, I noted that the parameter used to configure both is the same (oracle.sysman.emSDK.sec.DirectoryAuthenticationType) in emons.properties.
    Can I use both SSO and EUS with EM Grid Control???

    Hello
    i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
    Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
    Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases?

  • Error creating a user defined report in the grid control

    I am trying to create a simple User Defined report in the Grid OEM
    Under the 'Elements' tab I have a 'Type' - 'Database Table from SQL'
    And I have this 'Statement' - SELECT * FROM SYS.DBA_USERS
    When I Click the 'Preview' button I get this error.
    Error rendering element. Exception: ORA-00942: table or view does not exist
    I'm logged on as SYSTEM.
    Isn't the SYS.DBA_USERS table accessible by SYSTEM?
    Any advice on what I'm doing wrong/
    Edited by: bfee_sdc on Oct 19, 2010 9:12 AM

    What are the tricks?
    It has to be some what supported since I found this somewhere in an Oracle note...
    How to create custom reports on tables other than mgmt* views.
    To create reports on other tables, grant permissions to MGMT_VIEW user as MGMT_VIEW is responsible for creating reports in grid control
    SQL> GRANT SELECT on SYSMAN.<table_name> to MGMT_VIEW;
    And then create the reports in the reporting framework referencing SYSMAN.<table_name> in the query.
    I tried GRANT SELECT on SYS.DBA_USERS to MGNT_VIEW but this did not work.

  • Creation of reports from Grid control 12c

    Hi All,
    I wish to create some reports from Grid Control and push to mail especially looking for Daily Health Check report like Tablespace,Locks,Alertlog file errors,File systems,Archivelog files sync information in to one report.
    Thanks in advance.

    The native reporting application i.e. Information Publisher does not support such a feature, but in you are using BI Publisher integrated with EM, then BIP allows you to control when to email reports. for example, on completion, on failure, etc ..

  • Enterprise manager Grid Control for Windows 64 bit

    Hi,
    I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
    Thanks in Advance.
    SK.

    The OMS is on Win x86 and supports Agent on Win x64 target.

Maybe you are looking for

  • Is it possible to script language change in OSX Lion ?

    I recently purchased a Disney game (Cars 2) from the App Store, which advertises being available in 5 languages. It seems now that the game has no in-app options to change language, but selects the language based on OSX settings (but otherwise the ap

  • My phone is not connecting to any wifi's what do I do?

    my phone is not connecting to any wifi's what do I do?

  • IWeb - looking for replacements for 'blog' & 'photos'

    With a deep Sigh..., I am finally facing up to the fact that I must move my iWeb Websites to another hosting sight and deal with the loss of the intergrated blog & photo pages that come with iWeb.  I kept hoping for a miracle but now I must get on wi

  • Migration from SAP BC To SAP P.I

    HI Experts , I am required to do migration from SAP BC to SAP P.I. I would require the following Info/Help from you as i have not worked on such scenario before this! 1) What kind of challenges can be faced during migration from BC to XI? 2) What is

  • InfoObject used in Query

    I have  0CHART_ACCTS and 0GL_ACCOUNT used in the several cubes/ODS. There are quite a number of Query and WAD is created from these cubes/ODs. Is there a way to find out what query/WAD is using the InfoObject  0CHART_ACCTS or 0GL_ACCOUNT?