Is HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

Hi,
Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

Hello,
Following is taken from the support matrix --
Version Supported
Processor Type
OS Version
OS
32/64 bit
Exceptions and Additional Information
11.1.1.3
Intel / AMD x86-64
Microsoft Windows
Windows 7
1. 1.6 GHz minimum processor is required.
2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management  (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator.
See if that helps,
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easily.

Similar Messages

  • HFM Client 11.1.1.3 is supported with Windows 7 64 bit OS??

    Hi,
    Currently we are using HFM 11.1.1.3 version. Our company is upgrading all the Systems to Windows 7 machines. And would like to check whether it is supported with Windows 7 are not.
    Ex. HFM Client, Hyperion Reporting Studio, Smartview etc. Do I need to install patches, if any. Let me know. Thanks.

    Yes! HFM version 11.1.1.3 is supported by Windows 7 64 bit OS
    Find the below Exceptions and Additional Information:
    "1. 1.6 GHz minimum processor is required.
    2. EXCEPTION: Firefox is not supported for: Data Relationship Management (Web Publishing), FDM, or Interactive Reporting.
    3. EXCEPTION: Integration Services console only supports 32-bit binaries for x86-64.
    4. EXCEPTION: Windows x86-64 is not supported for Data Integration Management or Financial Management Console.
    5. Internet Explorer 8 and Windows 7 are supported for: Shared Services, Performance Management Architect, Calculation Manager, Smart View (with patch 9779433), Administration Services Web UI (Administration Services Console is not supported), Planning, Financial Management  (with patch 9976978 when on Windows 7), EPM Workspace (with patch 9314073), Financial Reporting (with patch 9657652), Interactive Reporting, Web Analysis, Data Relationship Management, FDM, ERP Integrator."
    Refer the below link for more information:
    Supported Platforms Matrices - Oracle Enterprise Performance Management System</title><meta name="Title&qu…

  • How do I re-enable client security solution on my Thinkpad W700 running Windows 7 64 bit

    How do I re-enable client security solution on my Thinkpad W700 running Windows 7 64 bit?  It no longer brings up the "password manager".  Thanks

    Patterns:
    Password Manager is part of the CSS package which you can download the W7 64 bit version from here:
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-73785
    Hope that helps

  • HFM Client (11.1.2.0.0) Installation Error Windows 7

    Recieved error after running the installTool.cmd in the Foundation11121 folder. It said that it could not find Z:\Foundation11121\\jre\winAMD64\1.6.0\bin\java
    The "\\" after Foundation11121 is what the error says, not a typo.
    Client install works on Windows XP, but not on Windows 7.

    Idr,
    Thanks for the suggestion. It allowed the install to get a bit further. Here is the log from the command prompt that started with the install. Looks like we're getting Failures relating to 32-bit system.
    Installer Path check... Ok
    Checking if the file exist and have read permissions: Y:\Foundation11121\assembl
    ies... Ok
    Checking if the file exist and have read permissions: 'help' or 'help.zip'... Ok
    The folder 'help' or file 'help.zip' have to exist for successfull installat
    ion.
    Checking if the file exist and have read permissions: Y:\Foundation11121\jre...
    Ok
    Checking if the file exist and have read permissions: Y:\Foundation11121\setup.j
    ar... Ok
    Check assemblies:
    Y:\Foundation11121\assemblies\biplus_product_reporting_client... Not exists
    Y:\Foundation11121\assemblies\webLogicCommonComponent\11.1.2.0\assembly.dat.
    .. Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\ocm\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\biplus_interactive_reporting_services... Not e
    xists
    Y:\Foundation11121\assemblies\tools\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\hpm... Not exists
    Y:\Foundation11121\assemblies\biplus_financial_reporting_webapp\11.1.2.0\ass
    embly.dat... Ok
    Y:\Foundation11121\assemblies\ohs\11.1.2.0\assembly.dat... Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\hfm_client\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\biplus_migration_utility\11.1.2.0\assembly.dat
    ... Ok
    Y:\Foundation11121\assemblies\biplus_dds... Not exists
    Y:\Foundation11121\assemblies\analytic_services_provider_webapp... Not exist
    s
    Y:\Foundation11121\assemblies\hfm_common\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\essbase_administration_services_client... Not
    exists
    Y:\Foundation11121\assemblies\biplus_product_reporting_services... Not exist
    s
    Y:\Foundation11121\assemblies\planning... Not exists
    Y:\Foundation11121\assemblies\disclosure... Not exists
    Y:\Foundation11121\assemblies\hfm_services\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\essbase_integration_services... Not exists
    Y:\Foundation11121\assemblies\staticContent\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\aif\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\calc... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_datasync... Not exists
    Y:\Foundation11121\assemblies\essbase_services... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_batch_client... Not exists
    Y:\Foundation11121\assemblies\productCommonComponents\11.1.2.0\assembly.dat.
    .. Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\hsf_server... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_webapp... Not exists
    Y:\Foundation11121\assemblies\hps_webapp... Not exists
    Y:\Foundation11121\assemblies\biplus_product_reporting_common... Not exists
    Y:\Foundation11121\assemblies\fdm\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\biplus_financial_reporting_common\11.1.2.0\ass
    embly.dat... Ok
    Y:\Foundation11121\assemblies\bpm_architect_generator... Not exists
    Y:\Foundation11121\assemblies\biplus_webanalysis_webapp\11.1.2.0\assembly.da
    t... Ok
    Y:\Foundation11121\assemblies\biplus_workspace_webapp\11.1.2.0\assembly.dat.
    .. Ok
    Y:\Foundation11121\assemblies\essbase_client... Not exists
    Y:\Foundation11121\assemblies\sharedServices\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\essbase_studio... Not exists
    Y:\Foundation11121\assemblies\biplus_portlets_webapp\11.1.2.0\assembly.dat..
    . Ok
    Y:\Foundation11121\assemblies\commonComponents\11.1.2.0\assembly.dat... Fail
    ed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\biplus_core_services\11.1.2.0\assembly.dat...
    Ok
    Y:\Foundation11121\assemblies\essbaseProductCommonComponents\11.1.2.0\assemb
    ly.dat... Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\essbase_studio_services... Not exists
    Y:\Foundation11121\assemblies\oracle_common\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\biplus_interactive_reporting_client... Not exi
    sts
    Y:\Foundation11121\assemblies\financial_close... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_services... Not exists
    Y:\Foundation11121\assemblies\hfm_webapp\11.1.2.0\assembly.dat... Ok
    Y:\Foundation11121\assemblies\essbase_administration_services_webapp... Not
    exists
    Y:\Foundation11121\assemblies\biplus_workspace_new_webapp\11.1.2.0\assembly.
    dat... Ok
    Y:\Foundation11121\assemblies\rmi... Not exists
    Result of checking assemblies: Failed!
    Checking environment variables...
    Ok
    Checking if the file exist and have read permissions: C:\Users\swang... Ok
    User home have to exist for successful installation.
    Checking User Account Control (UAC) state...
    User Account Control is enabled. Installation may lead to unpredictable results
    and thus will be stopped.
    EPMINS-01001: One or more preinstallation checks failed. Correct the errors befo
    re continuing with the installation.
    Check assemblies:
    Y:\Foundation11121\assemblies\biplus_product_reporting_client... Not exists
    Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\biplus_interactive_reporting_services... Not e
    xists
    Y:\Foundation11121\assemblies\hpm... Not exists
    Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\biplus_dds... Not exists
    Y:\Foundation11121\assemblies\analytic_services_provider_webapp... Not exist
    s
    Y:\Foundation11121\assemblies\essbase_administration_services_client... Not
    exists
    Y:\Foundation11121\assemblies\biplus_product_reporting_services... Not exist
    s
    Y:\Foundation11121\assemblies\planning... Not exists
    Y:\Foundation11121\assemblies\disclosure... Not exists
    Y:\Foundation11121\assemblies\essbase_integration_services... Not exists
    Y:\Foundation11121\assemblies\calc... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_datasync... Not exists
    Y:\Foundation11121\assemblies\essbase_services... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_batch_client... Not exists
    Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\hsf_server... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_webapp... Not exists
    Y:\Foundation11121\assemblies\hps_webapp... Not exists
    Y:\Foundation11121\assemblies\biplus_product_reporting_common... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_generator... Not exists
    Y:\Foundation11121\assemblies\essbase_client... Not exists
    Y:\Foundation11121\assemblies\essbase_studio... Not exists
    Failed!
    Assembly for win32 platform is used
    Failed!
    Assembly for win32 platform is used
    Y:\Foundation11121\assemblies\essbase_studio_services... Not exists
    Y:\Foundation11121\assemblies\biplus_interactive_reporting_client... Not exi
    sts
    Y:\Foundation11121\assemblies\financial_close... Not exists
    Y:\Foundation11121\assemblies\bpm_architect_services... Not exists
    Y:\Foundation11121\assemblies\essbase_administration_services_webapp... Not
    exists
    Y:\Foundation11121\assemblies\rmi... Not exists
    Press Enter to exit

  • Windows Vista 64 Bit VPN Client

    I navigated the Cisco Website (http://www.cisco.com/cgi-bin/tablebuild.pl/windows) to find a 64 bit version of the Cisco VPN client and was unable to identify if there was one.
    What software can be used to connect on a Windows Vista client to obtain Remote Access?

    February 18, 2010
    Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
    In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments. 
    A 64-bit specific compatible image is available for installation on these platforms.
    Please have communicate feedback (both positive and problems) to [email protected]
    Key Capabilities available for Beta Testing:
    New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
    Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
    Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
    Release Notes will be available next week via a link once the download image is selected.

  • Printing from a 32 bit client in a 64 bit environment (laserjet 4000 n with windows 7)

    I have a HP laserjet 4000n connected to a 64 bit windows 7 machine.  Another client (32 bit) on my network wants to print to that printer.  I saw on the support website instructions for how to do this:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    So far, I have installed the 64 bit driver (just re-installed and I can print from the 64 bit server).
    I then downloaded the 32 bit driver files (for PCL 5) and saved them.
    I then went to the printing properties of  the printer and chose advanced drivers and checked the box "x86". The instructions called for finding the file "hpcuXXXc.inf".  In the printer driver folder, there were 2 subfolders - one marked 64 bit and inside that folder was a file "hpcu112t.inf" (file ends in "t" not "c") - so I chose that file and pressed ok and got the following error message:
              The specified location does not contain the driver HP LaserJet 4000 Series PCL5 for the requested processor architecture.
    I then downloaded more drivers (for PCL 6 - even though my printer is labelled PCL 5).  This time, I got no 64 bit subfolder (only one folder labelled windows vista).  However , there WAS a file labelled "hpcu112c" this time - so I chose that and still got the same error message.
    Help!?
    Thanks.
    Janc

    Phychopomp1,
    Windows 7 64 bit is able to run 32 bit programs. However, some programs will have issues.
    Have you checked your programs against the Windows 7 compatibility list: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=2394
    This should tell you if they are compatible or not with Windows 7 64-bit.
    There are compatibility settings that you can try once you have installed the software also. Right click on the shortcut and choose properties, then go to the compatibility tab and try the various OS settings.
    If those things fail, then you should try Windows XP Mode (convenience link: http://www.microsoft.com/windows/virtual-pc/download.aspx). This will allow you to install your programs in a virtual copy of Windows XP SP3 using Windows Virtual PC. Once XP Mode is installed, when you install your software into it, you will get a shortcut to use the program from your Windows 7 start menu without even seeing the XP Mode window.
    Hope this helps,
    David
    Windows Outreach Team – IT Pro
    http://www.microsoft.com/springboard

  • On Windows 2003 64-bit, Which 10g Client to Install ?

    hello again,
    I have a server with the Windows 2003 Enterprise 64-bit operating system.
    I need to install Oracle 10g Enterprise onto the server.
    I noticed there are 2 install folders for the 10g Client R2 - one is R2 x32 and the other is R2 x64. I want to be sure I install the best, most problem-free version of the client.
    Are there any known issues with using the 64-bit client? Sorry for the lame question - I googled and didn't find much.
    Thanks, John

    That's correct. And the primary application that will be installed is 32-bit. But I don't think it needs to interact with the client tools at all.
    We are upgrading the server from 32 bit to 64, the OS and the database from 9i Enterprise 32 bit to 10g Enterprise.
    I may just install the 32 bit client to avoid any problems.
    Thanks, John
    (The hardware is way ahead of the software)

  • Installation of Oracle 11g 32 bit Client on Windows 7 (32 bit) laptop.

    Hi,
    I just got a new Laptop with Windows 7 (32 bit) operating system.
    Has any one successfully installed Oracle 11g client on in Windows 7 environment and if so what are the steps involved.
    In the past I have never had any trouble installing an Oracle client on a Windows work station.
    Thanks,
    Ashim.

    Oracle hasn't officially supported 11g on windows 7. folks have installed it successfully too. Check the below threads.
    Re: 11g R1 database installation is successful on windows 7 64-bit
    Oracle 11g on Windows 7
    Re: DB 11gR2 for Windows ??
    HTH
    -Anantha

  • Client Security Solutions wants to synchronis​e passwords with Windows

    For some reason Client Security Solutions wants to synchronise passwords with Windows. I managed to get rid of this request years ago but it has returned. My problem is that I can't remember what my windows password is. How can I stop ThinkVantage from making this request each time I boot up my computer?

    C'mon, Lenovo!  I'm the original poster on this...your original response was that Password Manager doesn't work on Google Chrome because they don't support extensions...but they have in their latest release since at least 5 months ago!!
    Disappointing.
    T410 i620 4GB, Windows 7 x64

  • SAP Test Acceleration Optimization Client VS Windows 7 64 Bit OS

    Hello,
    Does anyone have any experience using the TAO client with Windows 7 64 Bit?  Any experiences you would like to share?
    Thanks.

    Am not sure but I don't think it will support 64 bit Win 7, according to SAP notes  SAP TAO SP4 support only Win 7 - 32 bit.

  • Error While open the application in a Cluster on HFM Client

    Hi,
    I have added Cluster in Clinet configuration in HFm, after adding the cluster successfully i have logged into finacial management client then i have selected the Cluster and it opens pop up windows which we need to Select the temp folder for that application
    my problem starts here after givingthe folder it thorws me an error( some times we were able to select the application and assigned the folder with out any issues, but some times we could not)
    we tried with different credentials but no luck.
    Here is the Error
    "Could not Authenticate the specified user"
    Error Reference Number: {5895D16C-F1B9-475B-A3A4-F577D1A28449}
    Num: 0x8004021a;Type: 0;DTime: 3/6/2012 9:30:02 AM;Svr: HFM Client machine;File: CHsxClient.cpp;Line: 2343;Ver: 11.1.1.1.0.2120;ExErr: Unknown Error;
    Can any body please help me!
    Thanks
    Ashok
    Edited by: Ashok on Mar 6, 2012 6:40 AM

    Hi Ashok,
    Please check the below link which might resolve the issue.
         Financial Management Error "There was some communication error" (Doc ID 1280613.1)
    Hope this helps,
    Thank you,
    Charles Babu J

  • Cannot see application in workspace (Created App via HFM client not BPMA)

    Dear All,
    I have some trouble with my 11.1.1.0 installation. After installation and configuration, I try to goto workspace to find consolidation administration and cannot find it. Then I tried to create an app using the HFM client but after granting all security to the user account, the application will not show up in workspace.
    Is there anyway to un-register the HFM installation from Shared Services and Workspace and re-register the HFM installation. There is an option in previous Hyperion version 9 but in 11.1.1.0 there is no such option under the EPM configurator.
    Can I fix it or it's pretty much a re-installation. Please give me some advice
    Thanks in advance

    Tried uninstall HFM and reinstall again.
    Ran EPM onfigurator and everything seem to processed ok.
    I can log onto Shared Service and see that I have created an HFM Application and be able to provision users to the application.
    But when I log onto Workspace, it just won't show anything related to HFM, the application is not on my application list and under "Classic Application Administration" only Planning shows up and no HFM.
    I have Apache running on 19000 and IIS running on 80.
    Any idea what I can do to trouble shoot?
    I tried to create 2 apps, I using http://compter:19000/hfm as security url and 1 using :80/hfm and neither makes any difference.
    Edited by: Redcomet on Oct 15, 2009 7:42 PM

  • Using HFM Client API from FDM

    Hi all,
    is it possible to use HFM CLient API libraries from FDM Scripts or just HFM Web API?
    Thanks

    "Unreadable" squares are probably an indication that you are seeing non-printable characters due to the fact that the data is in one format (i.e. Unicode) and you are attempting to treat it as a another data format (ASCII). You may need to instruct the function to return data in a particular type or cast the result so that you are processing it properly.
    In regards to the wrapper, I think he's referring to the fact that vbscript doesn't support UDT's. (User Defined Types more commonly referred to as structs) You don't really need to wrap the API itself, rather create a COM object (or other) that would expose a property for each struct field. In the vbscript you would then create an instance to the object and use that with the API call.
    In regards to webservices, HFM doesn't have much out of the box. The comment was to create your own, etc. About the only thing you have going for you OOTB is Smartview. Smartview doesn't technically have a web service; however, if you monitor the data that goes in and out of Smartview it is dirt simple. For more than one project, I've taken advantage of Smartview as a means to get quick and dirty data out of HFM.

  • HFM client vanishes after trying to Extract Metadata

    Hey!
    When I installed HFM, I configured my DCOM with a default user admin.
    Had to change recently because my Dataload via FDM with Drillable region was not working. So, changed to a domain account. Dataload is working now.
    But noticed that I cannot extract metadata anymore. While trying to do so, my HFM Client vanishes.
    Idea?
    Thanks
    -Cheers

    Hi Tony!
    What is crashing is my HFM Client, not FDM =)
    I cannot do any operation with HFM such as load metadata, extract metadata/data, nothing.
    It just vanishes at the middle of operation (I guess)... and no log is recorded.
    At the FDM machine I can do those tasks with no problem (same application)...

  • Port used by HFM Client

    Hey All,
    Can you please tell me What is the default port used by HFM "WINDOWS" client to connect to Server ?

    HFM uses DCOM. The connection is initially made from the HFM client to the HFM Application server on the RPC mapper port 135. After initial connection a dynamically allocated range of ports are used, it is not a fixed range by default. If you need to fix the range you will need to do this on each HFM application server using the DCOMCNFG tool.
    Have a look here from the msdn docs.
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndcom/html/msdn_dcomfirewall.asp
    If you need to deal with firewalls you will need to allow traffic from the client to the server on port 135, and you will need to fix the DCOM port range.

Maybe you are looking for

  • Why can't I use select tool on an inactive layer in CC 2014?

    Path or direct selection only seem to work on the currently selected layer, rather than across layers as it did before. Is this a new feature, or bug? Finding and activating the layer(s) I want to modify is an egregious process. Any ideas?

  • Number of contacts in Smart Group

    i have a smart group set up for our store customers. it has gone over the relay limit for our email provider and i am looking at other options. the problem is that pricing is based on the number of folks in your contact list. i could print the group

  • How to - import with WB "As Shot"???

    I can't figure this out. I want my imported photos to start off "As Shot" on the white balance. Currently they come in as "Custom" on WB. In the Import Preferences I see nothing and the Import Photo screen shows "Develop Settings" as "None". I just d

  • Songs don't show in iTunes

    I imported a cd to itunes, but it doesn't show in the library or anywhere. I tried it again, "replacing" the already imported songs but still can't find them. iTunes shows them importing, and it all seems to be working ok, but then they are nowhere t

  • Can inbound Idoc Contain .PDF attachment?

    Hi there, I have a requirement where there is a need to create an Inbound Idoc in the CRM system containing a .PDF file attachment. 1) Can and IDOC contain file attachments? 2) If yes which segment woult contain it, or how it should be attached. The