Is high speed needed

Is high speed internet needed for the airport extreme to work? I want it for the other functions and only have a slow dial-up connection. Can it function fully with having an internet connection?

The AirPort Extreme base station (AEBS) can be used without any connection to the internet.
The AEBS does NOT have a built-in modem of any kind and therefore it will not be able to directly connect to any dial-up ISP.

Similar Messages

Do I Need High Speed HDMI for 1080p

My Appletv works great and I am so happy with HBOGO but I don't think I am getting 1080p or even 720 while watching. I have an HDMI cable from the ATV to my AV receiver but it is a plain hdmi vs a high speed hdmi. I do have a high speed cable running from the av receiver to my tv. So do I need a high speed hdmi from Apple TV to my av receiver to get full HDTV quality?

no any hdmi v 1.3 cable will work
even though there are people who are more then happy to charge you 100's for special magic super cables

HT201295 Late 2009 Intel iMac Needs Frequent SMC reset - constant high speed running fan

Late 2009 Intel iMac is having reoccurring episodes of high speed fan running, especially after waking it up. The SMC reset by unplug and reboot works, but I worry that this is a serious sign and that the machine is slowly dying. Any thoughts? Works fine otherwise.

wolfgang272 wrote:
Do you have any ideas?
Yes, you just need to reset the SMC and you should be fine
https://support.apple.com/kb/HT3964
Whoops you already did that.
Hardware Test then
https://support.apple.com/kb/ht1509
Read more info here
https://discussions.apple.com/message/16276201#16276201

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and labview.

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and Labview 8.2 . I've found example code for generating pulses and creating intricate count setups but no straightforward examples of a simple counter. Any suggestions?

Hello tinfish,
I could not find a simple example that implements simple counting either, but it should be straightforward enough for us to try. Do you have the CTR module configured properly in MAX? If so, can you monitor the channels on your CTR 502 for input? Try connecting a square wave or some other digital pulse to the terminal to test the functionality of the counter module first (before programming). If you monitor the input channels with somethign connected you should see the count increment each time it sees a rising edge (assuming default configuration).
Once you've verified that everything works in MAX, you can set up your CTR module in a LV 8.2 project. If you need help with this, refer to the help document (look in the "Configuring FieldPoint in LabVIEW" section):
C:\Program Files\National Instruments\FieldPoint\documentation\Online Help\fplv.chm
You should be able to just read a channel tag from your CTR 502 using an FP Read VI. (Simply drag the channel from your project onto the block diagram). Since counting is the default behavior of the 502, there is no special programming involved to make it work.
I hope this helps -- if it's too high-level we can talk details about specific questions you have. Have a good one!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What do I need to do?

I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do.
I did try to download Firefox again, but still will not work.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Do you need a high speed USB drive to effectively use a 5G ipod

My new 5G is working on my newer dell comp with the high speed, but not working on my older vaio without a high speed drive. Thoughts?

My new 5G is working on my newer dell comp with the high speed, but not working on my older vaio without a high speed drive
Do you mean a high speed (USB 2.0) port?
Your hard drive is not USB and it is fast enough.

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

How can I stop spam from someone called AT&T High Speed Internet? I do not know what the email address is.

I am receiving 100's of spam emails. They are all advertising different types of products but they all say they are from AT&T High Speed Internet. I have used the junk filter on them but it does not pick them up as junk. I have to do it manually each time. I have contacted my UVerse provider and they cannot assist because it is getting through Yahoo to Thunderbird. They say that it is a problem that I will have to have assistance from Thunderbird to resolve so that I can have this listed as junk and will not have to do this manually. I am at my wit's end. Please, please help me!

Yahoo has its own junk mail filter (Spamguard), which you should confirm is enabled:
* [https://help.yahoo.com/kb/mail/stop-spam-yahoo-mail-sln3227.html Mail Help | - SLN3227 - Stop spam in Yahoo Mail]
The significance of this is that marking messages as junk in Thunderbird probably isn't integrated with Yahoo's system, so Yahoo may not be getting trained to block them. You might need to go into Yahoo from time to time and mark accumulated junk as spam.
Separately, there are solutions for filtering spam on your computer as the mail is downloaded from Yahoo. Thunderbird has a built-in filter, as described here: [[Thunderbird and Junk / Spam Messages]]. However, if that isn't as effective you would like, there are third party products as well.

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

Can I convert an old IMAC computer with OS 9 operating system from being "dial up" to high speed?

Can anyone tell me how I can convert my old IMAC from "dial up" to go on the internet as high speed? I have an ISP provider for a more modern computer that I own, but I really would like to use my old IMAC on the internet as well? How can I make it compatible with high speed internet? If I try to go on line, the internal modem "dials up". How can I change that and cause it to communicate with my external high speed modem?

Any iMac can connect by ethernet to the router.
You'll need to disable the modem and set up the network config.
Too long since I used OS9 to guide you on that bit; ask in the correct forum;
https://discussions.apple.com/community/mac_os/classic_mac_os or;
https://discussions.apple.com/community/desktop_computers/imac_powerpc

Advice on buying camera for stills and high speed video

Hello video pros,
I'm a music composer who occasionally dallies with some simple photographic and video work. I'm looking for some advice re picking up a camera to make some simple videos, but with the highest quality I can get with consumer grade gear.
I am pretty much ruling out consumer grade camcorders for two reasons: One is that I want to be able to shoot high quality stills and make stop motion videos from very high res stills. The other is that I don't need audio recording at all because the video will always be just to accompany music - simple music videos basically. So I'm much more interested in the recent mid range point-and-shoot bridge cameras with full HD video modes rather than camcorders - they seem to cover more realistically the range of things I want to do.
My main question is regarding shooting at higher frame rates than 30 fps. I'd like to shoot video at a minimum of 60 fps (or higher) to then playback at 25 fps to get that smooth, slightly dreamy motion effect. There are a few cameras out there that offer high speed video modes, but most are nothing more than a gimmick because the res is so low that the resulting video is unusable. However a few cameras now seem to hit a sweet spot, offering 60 fps recording at HD res, and also 120 fps at 640x480 which (at a pinch) is usable, at least for stuff destined for simple web use.
The cameras I've narrowed it down to so far seem to be the Nikon Coolpix P500, the Panasonic Lumix DMC-FZ40 and possibly the Fujifilm HS20 EXR. I also was vaguely interested in the Casio Exilim HS cameras, but they seem to only offer high speed video modes that are pointless - 1000 fps at a completely useless low res, and 120 fps only at 640x480. The others I listed seem to offer at least 60 fps at some kind of HD res, so I'm assuming that with these cameras I could shoot decent looking video which would then play back with that slightly hyper real slow-mo effect when I import into FCP at 25 fps. Is this correct? Or is it the case that when they say HD video @ 60fps, it's some kind of interlaced mode which means you can't play back at a slower frame rate to get smooth slow motion?
The other thing I've noted is that all of these cameras do record HD video, but it's always compressed in H264 format. I understand that this puts a serious limitation on how much post-processing you can do to the video afterwards. Highly compressed video will begin to show image artefacts very quickly when you apply effects as opposed to higher quality (bigger file size) video compression. But I think I can live with that given that for the stuff I want to make, it will just be simply edited and only lightly graded. However, of the cameras I'm looking at, the Lumix also records in a format called AVCHD which (I think) does full HD at 17 Mbps. Does this mean that it's basic video quality is significantly better than the other choices? That said, from the specs it's unclear if it actually allows shooting at higher frame rates which you can slow down at playback.. the way it describes 60fps mode makes it sound like it's just interlacing so you don't actually get a higher number of images per second to then be able to play back at a lower frame rate. This for me might rule it out because I really want the creative effect of high speed video, even if it's only the subtle effect of 60 fps slowed down to 25.
So in summary, I'm looking for a camera capable of creative shooting (high quality stills to make stop motion videos, usable-quality HD video along with at least some degree of high speed video at a resolution that is still usable) to make interesting and artistic footage to accompany music. The destination medium is the web, so even though I'd like to get the best quality raw material to work with, the final destination is not exactly a cinema screen. As a pro in a related industry, I'm all too aware of the pointlessness of buying outlandishly over-specced gear that is far beyond your level of expertise. So I want to keep it simple and realistic, budget-wise, given the level I'm at. Nothing more than say $800 US. A seriously high end camera would be wasted on me, and I think it would be wiser to invest in useful accessories like a steadicam merlin and decent tripod rather than blow loads of cash on a camera far beyond my skill level.
Apologies for the long post, any and all advice would be very welcome and appreciated! And feel free to correct me if my assumptions are wrong, and suggest any gear that I should consider looking at.

Hi, thanks for your input. I'm aware of the fact that my question is a bit OT, but I'm just looking for input from people with more experience and broader information in this area than I have myself.. I know people are here to talk about FCP, but I'm betting many editors and film makers who work with FCP will have more insight in this area than I do.
I've been reading every review I can find at dpreview, and also am watching as many test video examples I can find on the internet, mostly on vimeo because the ones on youtube look pretty awful. I just am reaching out to get some actual experience and advice from people who might give me pointers on what to look out for.
As for 60fps not being fast enough, I know what you're saying. But for me, even 60 fps slowed down to 25 fps on playback is enough of an interesting effect, as long as the actual quality of the footage looks good to start off with. I like the subtle effect of slightly slower than real motion when it's real, bona-fide high frame rate slowed down. Artificially created slow-mo using plug ins looks cheesy to me, and the gimmicky super high frame rates of cameras like the casio exilim (where the resolution looks like a mobile phone video from ten years ago) are completely useless.
I've seen lots of examples on vimeo of stuff shot with DSLRs from Canon and Nikon at 60fps and then played back at 25 or 24, and it looks plenty nice enough for what I'm after. But am I kidding myself that I'd get anything near as nice with the price range I'm looking at?

I have one application that has requirement to do low and high speed acquisition. I want to change sample rate while running. BUT... I have E series Device

I am writing control software for a process that is usually dull and
requires only 10 Hz acquisition rate. At particular times during
the sequence, however, we are interested in looking at a couple of
channels at 1000 Hz. My approach so far is to configure my
Buffered DAQ to run at the higher rate at all times. When we are
in the 'high-speed DAQ' mode, the program logs every point to
disk. In the 'low-speed' mode, I am picking off every nth (in
this case, 10th) point to log to disk. At all times, I update my
GUI indicators on the front panel at a maximum of 4 times per second (I
find that anything faster results in an uncomfortable display), so I
fill up a FIFO with data in my acquisition / logging loop, and read the
FIFO in the display loop. The data in my GUI display can be up to
250 milliseconds off, but I find this acceptable . As a side note, I
need buffered Daq with hardware timing, as software timing results in
lost data at 1000 Hz.
This all works fine and dandy, but I am convinced that it is not the
most elegant solution in the world. Has anyone developed a
buffered DAQ loop where the scan rate can be adjusted during
operation? I would like to change the rate of the E-Series card
rather than relying on down-sampling as I am now doing.
The reason I have concern is that at the moment I am simulating my AI
using MAX and when running the down-sampling routine, I consistently
miss a particular event on the simulated data becuase the event in
question on the simulated data always occurs at the same 'time', and I
always miss it. Granted, while it is unlikely that my measured
signal and my acquisition are perfectly synchronized in the real world,
this particular situation points out the weakness in my approach.
More than anything, I am looking for ideas from the community to see
how other people have solved similar problems, and to have you guys
either tear apart my approach or tell me it is 'ok'. What do you
think?
Wes Ramm, Cyth UK
CLD, CPLI

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

High speed usb port?

I have a older laptop. 5 or 6 years old.
When I plug my ipod into the usb port a message pops up saying that this devise could preform faster, if I had a high speed usb port on my computer.
Could this be the problem why I cant put songs from itunes onto the ipod?
I get this message "The ipod "its name here" cannot be synced. The disk could not be read from or written to.

You have a different problem. The iPod can work with the slower USB1 ports but data transfer is painfully slow. It seems that your iPod needs to be restored back to factory settings.

Mac OSX 10.6.8 Garage Band '11. This error happens occasionally : I am forced to power-off-on. Pop-up states that error info will be sent to apple. I never hear back from apple. Second prob: Fan sometimes comes on, runs high speed, then slowly stops.

Garage Band '11: pop-up error forces me to power off-on. Message states that info will be sent to Apple.
I never hear back from anyone about this.
Second prob: Fan sometimes comes on, runs high speed, then slowly runs down and stops running.

First thing to do is a SMC Reset, you can find instructions at:
http://support.apple.com/kb/HT3964
READ THE INSTRUCTIONS CAREFULLY!!!!
Then try Repairing Disk Permissions, do this at least 2x. You will find this in Disk Utility which is located in Applications - Utilities - Disk Utility.
Finally you may need to uninstall Garage Band and reinstall. You may have to use Pacifist to do this, you can find it at:
http://www.macupdate.com/app/mac/6812/pacifist

Is high speed needed

Similar Messages

Maybe you are looking for