Is HLS protocol version 6 is supported in IOS 6.x and IOS 7.x ?
Is the latest HLS protocol version (version 6) is supported in IOS 6.x and IOS 7.x players ?
If it is supported can you please provide a sample m3u8 with EXT-X-START tag ?
I use native player and start play from web page in Safari
Master playlist
#EXTM3U
#EXT-X-MEDIA:TYPE=SUBTITLES,GROUP-ID="WebVTT",NAME="Main",DEFAULT=NO,AUTOSELECT= NO,URI="http://172.18.0.81:8080/mediaserver/download/2/service.523/item.m3u8?playlist=we bvtt"
#EXT-X-STREAM-INF:BANDWIDTH=16777216,SUBTITLES="WebVTT"
http://172.18.0.81:8080/mediaserver/download/2/service.523/item.m3u8?playlist=da ta
segmets playlist
#EXTM3U
#EXT-X-VERSION:4
#EXT-X-TARGETDURATION:1
#EXT-X-MEDIA-SEQUENCE:2280
#EXT-X-ALLOW-CACHE:NO
#EXTINF:1
http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=1
#EXTINF:1
http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=2
#EXTINF:1
http://172.18.0.81:8080/mediaserver/download/2/service.523/item.ts?chunk=3
Similar Messages
-
OIDs support difference between NX-OS and IOS
Hi,
I would like to know the OIDs support difference between NX-OS versions and IOS.
In specific I would like to know the OIDs for below listed MIB in NX-OS versions.
dot1dBasePortTable
dot1dTpFdbTable
dot1qVlanCurrentTable
vlanTrunkPortTable
lldpCacheTable
ipNetToMediaTable
ipNetToPhysicalTable
Thanks in advance.Hi,
Please refer to the below link.
ftp://ftp-sj.cisco.com/pub/mibs/supportlists/nexus7000/Nexus7000MIBSupportLi
st.html
It has details of MIBs supported on Nexus.
HTH!
Rakesh -
Can I reverse my iOS 6 back to the version that came out before 6. It worked great until vresion 5 invaded my iPod touch 4 32gb . My kids have the same issue and they are mad like I did something wrong. Please help me fix the mess. I want my old iOS back. Apple really dropped the ball on this one.
I agree with Home Button, but I wouldn't hold my breath waiting for a bug fix update.
With that said, initially I did a wireless or OTA (Over The Air) upgrade. Other than taking quite a while (almost 2 hours as I recall), it seemed to work OK until I started to actually check things out.
I was a little confused by the Pass Book app until I learned that you need to get "Pass Book" aware apps.. OK, no biggie..
Then the App Store was crashing...
On a hunch I hooked my iPod to my computer and restored it to factory settings and set it up as a new iPod. I did not restore from a backup. When the restore was fiinished I synched the iPod to my library.
So far so good. The device seems to run as fast as it ever has, the App Store is stable, all of my music and apps are loaded....
The only thing that does not work is WiFi synch. -
I have an iphone 4 with my office email (MS exchange) account configured. Other accounts are Gmail & iCloud.
Office email is configured as Push, Gmail as Fetch and iCloud as Push.
Till ios 5.0.x everything was fine. Office emails were getting pushed and there were no issues.
However after upgrading/restore to ios 5.1 & then 5.1.1 push email mostly does not work.
Few observations :
1. Push email works fine when I am at home on wi-fi.
2. When I leave home for work (therefore on 3G), mails stop getting pushed. Sometimes they get pushed for a period of 1 to 2 hours. Then they stop
3. Manually fetching office mails also does not work
4. Strangle accessing the office webmail site in Safari https://mail.xxxxx.com does NOT work. While i can load other sites in safari, the mail site does not load.
5. In office sometimes in the lift phone switches from 3G to Edge or no signal and then when out of the lift, suddenly mails get pushed, but then stop after some time.
6. Moment I get onto wi-fi, push emails start working
7. There is no issue with accessing gmail.
8. Other push notifications work (gmail app, facebook notifications etc)
9. There have been no changes to our MS exchange server
10. I have tried the usual stuff of resetting network settings, rebooting the phone, killing the mail app, going to airplane mode, deleting the mail a/c and recreating etc etc. But no luck.
Apart from upgrading/restoring to 5.1 and then 5.1.1, there have been no changes. The upgrades were done OTA, restore from 5.1.1.
However both times I have not set the phone as new and have restored backups.
Is anybody facing a similar issue ?
Any suggestions ?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Minimum IOS version to support scp URLs
While recent IOS versions support scp sources or destinations for copy
operations ...
aprompt#copy running-config ?
flash1: Copy to flash1: file system
flash2: Copy to flash2: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
http: Copy to http: file system
https: Copy to https: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
scp: Copy to scp: file system
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
tmpsys: Copy to tmpsys: file system
aprompt#copy running-config
... older ones obviously don't (here we have 12.1):
aprompt#copy running-config ?
bs: Copy to bs: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
xmodem: Copy to xmodem: file system
ymodem: Copy to ymodem: file system
zflash: Copy to zflash: file system
aprompt#copy running-config
Who could tell me the minumum version to support scp URLs?
Thanks and Regards, ThomasIdeally any feature set questions are answerable in Cisco Feature Navigator (http://www.cisco.com/go/fn).
The Secure Copy (SCP) feature provides a secure and authenticated method for copying router configuration or router image files. SCP relies on Secure Shell (SSH), an application and a protocol that provide a secure replacement for the Berkeley r-tools. So ideally you should be running crypto images (k9) which support SSH and hence SCP as well.
But following are some details about SCP, which may be helpful :
Feature Name
Releases
Feature Information
Secure Copy
12.2(2)T12.0(21)S
12.2(25)S
This feature was introduced in Cisco IOS Release 12.2(2)T.
This feature was integrated into Cisco IOS Release 12.0(21)S.
This feature was integrated into Cisco IOS Release 12.2(25)S.
The following commands were introduced or modified: debug ip scp, ip scp server enable.
Following is details Feature Information for Secure Shell Version 2 Support:
Feature Name
Releases
Feature Information
Secure Shell Version 2 Support
12.2(11)T
12.2(25)S
12.3(4)T
15.3(2)S
The Secure Shell Version 2 Support feature allows you to configure Secure Shell (SSH) Version 2 (SSH Version 1 support was implemented in an earlier Cisco IOS software release). SSH runs on top of a reliable transport layer and provides strong authentication and encryption capabilities. SSH version 2 also supports AES counter-based encryption mode.
The following commands were introduced or modified: debug ip ssh, ip ssh min dh size, ip ssh rsa keypair-name, ip ssh version, ssh.
Secure Shell Version 2 Client and Server Support
12.0(32)SY
12.3(7)JA
12.4(17)
The Cisco IOS image was updated to provide for the automatic generation of SNMP traps when an SSH session terminates.
SSH Keyboard Interactive Authentication
12.2(33)SXH3
12.4(18)
The SSH Keyboard Interactive Authentication feature, also known as Generic Message Authentication for SSH, is a method that can be used to implement different types of authentication mechanisms. Basically, any currently supported authentication method that requires only user input can be performed with this feature.
Secure Shell Version 2 Enhancements
12.2(50)SY
12.4(20)T
15.1(2)S
The Secure Shell Version 2 Enhancements feature includes a number of additional capabilities such as support for VRF-aware SSH, SSH debug enhancements, and DH Group 14 and Group 16 exchange support.
In Cisco IOS 15.1(2)S, support was added for the Cisco 7600 series router.
Note
Only the VRF-aware SSH feature is supported in Cisco IOS Release 12.2(50)SY.
The following commands were introduced or modified: debug ip ssh, ip ssh dh min size.
Secure Shell Version 2 Enhancements for RSA Keys.
15.0(1)M
15.1(1)S
The Secure Shell Version 2 Enhancements for RSA Keys feature includes a number of additional capabilities to support RSA key-based user authentication for SSH and SSH server host key storage and verification.
The following commands were introduced or modified: ip ssh pubkey-chain, ip ssh stricthostkeycheck.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Cisco IDS 4250XL - SSH protocol versions supported
I recently had a vulnerability scan completed and "SSH protocol versions supported" showed up in it for my IDS. Has anyone come across this and if so, how am I able to mitigate it. Is there a way to change the SSH version on the device?
What vulnerability is being asserted in the OpenSSH implementation of SSH protocol version 1?
I have not seen a new problem discovered in more than three years in the SSH protocol version 1. OpenSSH-3.7.1p2 contains all the fixes for all vulnerabilities that I am aware.
When a vulnerability assessment recommends shutting down SSH protocol version 1, they need to back it up with some facts to show that SSH1 as implemented in the IDS 4.x sensor is insecure.
=====
That having been said, you can disable SSH protocol version 1 by editing /etc/ssh/sshd_config and restarting the service. What you will lose is the ability to manage keys in the IDS CLI. So you cannot use authorized keys to log into the sensor.
The "copy scp:..." and "upgrade scp:..." commands will fail. When you start an SSH2 client, it will refuse to connect to the remote server because it won't trust the host key.
You also won't be able to manange network devices to perform blocking using the SSH protocol. -
Router platform and IOS version to support MPLS
I have few Cisco 2621 routers and one 3640 router, could I use these router to create a MPLS VPN lab? if so , what is the minimum IOS version required?
Thanks in advance.The minimum hardware and software image tu support MPLS can be found at www.cisco.com/go/fn select search by feature and in the search box put MPLS (Multiprotocol Label Switching) there you can find the platform and IOS to support basic MPLS, but you need to consider the fact that supporting MPLS special features like AToM can only be supported on some 7200, 7500, 7600, 10000 and 12000, http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a0080153e64.html#1030652
-
IOS version that support 2048 bits certificate
Hello,
I need to update a 2504 Wireless Controller to a version that supports 2048 bits certificates.
I´m checking release notes for release 7.4.110.0 and I don´t see any information about a limitation in certification size (2048 bytes in my case).
Do you know any restriction about the certificate size in this or another version?
Thanks and Regards.
Iván.2048 bit is supported on the WLC. I use it for WebAuth and 3rd party certificates as these vendors only issue 2048 these days.
Sent from Cisco Technical Support iPhone App -
I'm trying to update my iPhone 4 from iOS 5.1.1 to 6.1. When I try to do this using iTunes on my MacBook Pro (OS X v 10.5.8), with my iPhone in its cradle, clicking the "Update" button in Tunes gets a message saying "This version of iTunes (10.6.1) is the current version." I can't get the iOS update to download.
When I try to update to the iPhone directly, I get a message saying "iOS 6.0.1 failed verification because you are no longer connected to the Internet" at the Verifying Update step. I noticed that this message refers to iOS 6.0.1, even though I want to update to 6.1. It is possible that, a few weeks ago, I may have downloaded but not installed v 6.0.1.
Thanks for any help with this problemI tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....
Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe -
I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
I am using adobe ams(development version) to record video files in mp4 format using rtmp protocol. I am using mp4 as the file extension and as the stream specifier(codec).The videos are saving correctly.When i copy these files on a mobile device(android and iOS) they are not playing.Can somebody tell what I am doing wrong.
The rtmp url I am using is rtmp://localhost:1935/mp4:videoname.mp4Dropbox - defaultcodec.mp4
Dropbox - h264codec.mp4
These are the two files that I created .The first file is created by the default codec used by Flash player.
The second file(h264codec.mp4) is created by using Flash player 11 and as3 . I have encoded the file using h.264/AAC.
The tutorial followed for creating the second encoded file is Encoding live video to H.264/AVC with Flash Player 11 | Adobe Developer Connection
Thanks in advance . These two files stream successfully in the web application using flash player and as3 .I can play both of them in VLC too. But these files wont play on any mobile device(both android and iOS).
Please send me your feedback on this . In the meanwhile I will look into http streaming.
Any help is greatly appreciated. -
Hi,
My scenario is IDOC to Webservice.
I have done all design and configuration,
I used Receivere adapter as SOAP dapter.
When i am running the scenario i am getting following error.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 505 HTTP Version not supported"
regards,
XIHi,
This happens when target service expects a specific version of the HTTP protocol (1.0, 1.1 etc) and client does not match this expectation ... Try to check if target requires a specific version (1.1 only for instance) whereas XI uses another.
Rgds
Chris -
RisPort Help~ HTTP Version Not Supported
Hi,all~
I'm trying to get a realtime information(Phone ip address) by AXL RisPort,but i get a error: "HTTP Version Not Supported",it is so strange~!
i have added a web reference(https://<myCmServer>:8443/realtimeservice/services/RisPort?WSDL) on my web site with VS2005(C#).
help me~Thanks a lot.Thanks for your reply,
This really works.
But the problem now is in
RisPort web service's Method,
SelectCmDeviceResult SelectCmDevice(ref string StateInfo, CmSelectionCriteria CmSelectionCriteria);
i don't know what's initialize value of StateInfo,so i make it null,but the response of SelectCmDeviceResult.CmNodes is null,so i can't get any realtime information. can you help me?
there is my source code:
CM5WebReference.RISService myRis = new CM5WebReference.RISService();
ServicePointManager.ServerCertificateValidationCallback = new System.Net.Security.RemoteCertificateValidationCallback(ValidateServerCertificate);
CM5WebReference.CmSelectionCriteria csc = new CM5WebReference.CmSelectionCriteria();
myRis.Credentials = new NetworkCredential("CCMAdministrator", "passwrod");
ServicePointManager.Expect100Continue = false;
myRis.SoapVersion = System.Web.Services.Protocols.SoapProtocolVersion.Soap11;
CM5WebReference.CmSelectionCriteria cmSelection = new CM5WebReference.CmSelectionCriteria();
string stateInfo = ""; //is null? or....
csc.Class = "Any";
csc.Status = "Any";
csc.SelectBy = "Name";
CM5WebReference.SelectItem selectit = new CM5WebReference.SelectItem();
selectit.Item = "AppIpAddr";
CM5WebReference.SelectItem si = new CM5WebReference.SelectItem();
si.Item = "Name";
CM5WebReference.SelectItem[] sis = new CM5WebReference.SelectItem[2] { selectit,si };
csc.SelectItems = sis;
CM5WebReference.SelectCmDeviceResult a = myRis.SelectCmDevice(ref stateInfo, csc);
cmselectCri.SelectBy = "Name";
cmselectCri.Class = "Any";
if (a.CmNodes != null) //always null,it's so strange...
CM5WebReference.CmNode[] cn = a.CmNodes;
CM5WebReference.CmDevice[] cd = cn[0].CmDevices;
string ip = cd[0].IpAddress;
my entironment:
CM 5.0.4.1000-1
vs2005(C#) -
my itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
I have a Macbook pro 13.3 w/ i5 that has no hdmi port. I want to be able to connect the Mac to my TV set to watch Video, Photos and files from Mac to TV. Is the Thunderbolt port similar to a display port or mini display port? Can I use thunderbolt po
-
Line item screen (Customer, GL or Vendor),
Hi In any Display line item screen (Customer, GL or Vendor), I am not able to see the field called "User ID" or "Entered By". How can i see the above line item screens with the field "User ID, Entered by" field. thanx in adv
-
How do I find the Adobe printer driver? A friend said it was easy and just hit print and change preference to it. Yet I cant find it.
-
Anyone has experience for Deploy Vlan Dynamic using ACS 4.1 What step by step i must configured in ACS, and how when Certicate Authority using CA Microsoft.
-
Hi Guys, I'm trying install SQL SERVER 2008 R2 Management tools but there are error 1714 to remove microsoft visual studio tools for application 2.0 and i didn't have source to remove it , please help