Is hotfix KB2275950 still valid for win7 sp1 64bit?

Hi All:
We tried to install Windows6.1-KB2275950-x64.msu on my win7 desktop (win7 sp1 64bit) to fix some DCOM/TLS issue,
We followed the instruction as below:
To use one of the hotfixes in this package, you must create a registry subkey. To do this, follow these steps:
Start Registry Editor.
Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LDAP
Create a new REG_DWORD value that is named UseHostnameAsAlias, and set the value to anything other than zero.
Exit Registry Editor, and then restart the computer.
however after restart pc, we failed to install this hotfix.
The error message is "The update is not applicable to your computer".
The error in setup of event viewer as below:
Windows update could not be installed because of error 2149842967 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Downloads\Windows6.1-KB2275950-x64.msu" ")
is this hotfix still valid to windows 7 sp1 64bit?
thanks in advance.
fight for future!

Hi Mulder2008,
This Hotfix is only applied to Windows 7 Enterprise, Windows 7 Professional and Windows 7 Ultimate without Serveice pack 1.
Therefore it's indeed not valid to Windows 7 SP1.
Karen Hu
TechNet Community Support

Similar Messages

Mapi Session limit (EVENT ID 9646), Exchange 2010 fix still valid for exchange 2013?

Hi Guy's,
we run Exchange 2013 + Outlook 2010
as i was investigating an Outlook Sync Error, for a secondary mailbox, i figured out that the Mailbox has more than 500 Folders and that i can see the Evnet ID 9646 (Mapi session exceeded the maximum of 500 objects) on the Exchange Server.
Now i found a fix for Exchange 2010 but not for Ex2013, is the old fix for EX2010 still valid?:
Navigate to HKLM > System > CurrentControlSet > Services > MSExchangeIS > ParametersSystem. Create a new key in ParametersSystem named
MaxObjsPerMapiSession. In MaxObjsPerMapiSession, create a DWORD named
objtFolder with a decimal value of 600. Create a second DWORD named
objtFolderView
anyone an idea on this?
regards
Stefan

OK
i seems that fix is still working and you don't even need to reboot.
Also solved the sync Problems of secondary Mailbox.
regards
Stefan

Is this script still valid for setting up Drill through between HFM and FDM

Guys hoping some one can shed a light.
I am running hfm and fdm realese 11.1.1.3.000
I am having issues setting up the SSO authentication (all the other steps have been done, and HFM is aware that I have uploaded information that can drill back). I am using an SSO script that was part of an Oracle presentation, but don't know if that script is still relevant.
Here is a copy of the script (Visual Basic Script SSO Authentication) :
Function AuthenticateSSO(token, applicationName)
' Place your single sign-on authentication script here
' To signify an authentication failure, you should
' raise an error by calling the following method:
' Err.Raise [error number over 1000], [source], [description]
' Applicationname = FDMApplication in URL
Const strProcSig = "AuthenticateSSO"
Dim strUsername
Dim strDomain
Dim objHFMSSO
Dim strClusterName ' HFM cluster name
Dim strAppName ' HFM application name
Set objHFMSSO = CreateObject("upsIntBlockFM40C.clsHypeWindowFM")
If Not objHFMSSO Is Nothing Then
strClustername = "<xxxxxxxx>"
Select Case ApplicationName
Case "<xxxxxxxx>"
strAppName = "<xxxxxxxx>"
End Select
strUsername = objHFMSSO.Connection.GetUsernameFromToken(CStr(Token), strClustername, strAppName)
If Trim(strUsername & "") = "" Then
' Blank user name means the token is invalid.
Set objHFMSSO = Nothing
Err.Raise 2655, strProcSig, "The Single Sign-on token is invalid."
Else
' Return the user name from the authenticated token.
AuthenticateSSO = strUsername
End If
End If
Set objHFMSSO = Nothing
End Function
After I input all the information requested, I always get the error Server Error in '/' Application. The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
I did saw a note about this error that suggested that I needed to re-register and deploy again FDM. Did, but still have the same issue. So the only thing that I don't control is the script and that is why I am asking if this script is still active and usable?

I have done all of that but I still get an error when trying to drill back. I am using the Admin ID which exist on both FDM and HFM but I am always getting the
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
So the only thing that I hadn't tried at the time was the SSO script. Which was what I did.

Is this training still valid for Flash Builder 4.7?

Flash Builder 4 and Flex 4 Essential Training with David Gassner
Watch the Online Video Course Flash Builder 4 and Flex 4 Essential Training
this was made in 2010 I am interested in learning about Flash Builder but I know that you want to be current, does anybody with experience with the language think it is still a good choice? David Gassner is an excellent teacher.Thanks

Well Flash Builder 4.7 came out in 2012, and it also dropped the Design Mode View. So those tutorials may go over stuff that you wouldn't have. That being said. 4.6 still has the design view and then it could possible be some use. Still AIR has changed a lot since 2010, there are better ways of doing things that can both be optimized for mobile... for example Starling/Feathers or MadComponents. Plus now Apache is in charge of Flex, and they have continued on a lot of progress.
Apache Flex®
Feathers - Open Source User Interface Components for Starling Framework
MobileAppDev | Mobile Application Development

Can't run full version of Photoshop, even though I'm still valid for the student payment plan.

I keep getting the trial prompt for photoshop, even though I'm still running the student edition payment plan, and it hasn't expired. Is this a glitch or has the plan been altered? Help please.

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Is Using the COM API for Integration still valid for UCM 11g?

Dear All,
One of our partners is trying to implement integration to UCM by using the COM API (described http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10807/c08_com.htm#i1084682).
However, they cannot follow the manual, because the environment does not correspond to the written text:
-     8.2.1 To set up IdcCommandUX, run the IdcCommandUX setup file, which is stored in extras/IdcCommandUX/setup.exe in the media. – no such directory exists (neither extras, nor IdcCommandUX); ‘extras’ used to be in 10g, though
-     8.2.3 1. Add the IdcCommandUX control to the project . – according to the partner, this is supposed to mean that IdcCommandUX.ocx must exists somewhere – there is no such file to be found
-     8.4 speaks about “IntradocClient OCX component”, 8.5 speaks about “IdcClientOCX Component” – the system has only IdcClient component, which contains only idcclient.jar
Could anyone confirm that COM API is still available in 11g? If so, what steps need to be followed to make it running?
Thanks in advance, Jiri

For what it's worth, I had no problems migrating an authentication plugin from 4 to 5. This is really good, because otherwise I wouldn't be able to use 5.1.

Is WindowsAPICodePack.Sensors Still valid for accessing sensors on Latest Windows Build ( Technical Preview Windows 10)

Hello,
I have been an avid user of Microsoft.WindowsAPICodePack.Sensors for accessing the sensors(HID,non HID) since WIndows 7 days.But recenlty I have found some exception coming while accessing the same code in the Windows 10 technical preview(build 1041
: from here -->
http://windows.microsoft.com/en-us/windows/preview-iso-update-1503).
I am using build 10041 and the below is the portion of the code giving me attached Exception Continously.The code works fine on Windows 7/8/8.1
using Microsoft.WindowsAPICodePack.Sensors;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace TestWindowsAPICodePackSensors
    class Program
        static void Main(string[] args)
            SensorList<Sensor> sensors =     SensorManager.GetAllSensors();
            Console.WriteLine("There are " + sensors.Count +" sensor(s) installed on the system.");
Kindly assist , is this is the bug in the build or I have to use somethign else for Windows 10.
Thanks and Rgds,
S

Any update on this.
Thanks in advance !
Rgds,S

DNG converter 6.4 and DNG codec 1.1 for Win7 32 & 64bits released!

The DNG converter 6.4 has been released, http://www.adobe.com/products/dng/ with support for many new cameras, including:
Canon EOS 600D (Rebel T3i / Kiss X5 Digital)
Canon EOS 1100D (Rebel T3 / Kiss X50 Digital)
Fuji FinePix S200 EXR
Fuji FinePix F550 EXR
Fuji FinePix HS20 EXR
Fuji FinePix X100
Hasselblad H4D-40
Kodak EasyShare Z990
Nikon D5100
Olympus E-PL1s
Olympus E-PL2
Olympus XZ-1
Samsung NX11
Note that it is the last version to run on Power PC Macs: http://blogs.adobe.com/lightroomjournal/2011/03/dng-converter-6-4-last-to-support-powerpc- mac-systems.html
Also released today: The DNG codec 1.1 that now supports the 64bits version of Windows 7, but does not support Vista anymore.
http://labs.adobe.com/wiki/index.php/DNG_Codec
Finally, the DNG Profile Editor beta 3 is out too, and has also been updated to address bug fixes and support DNG files utilizing the updated DNG 1.3 Specification.

I just downloaded and installed this version on Windows 7 Home Premium 64bits.
I can report it works great with my Raw DNG files, from camera: Pentax K-m/ K2000.
Probably also with all other Pentax camera's.
Jan (Netherlands)

Enterprise Hotfix Rollup for Win7 and Server 2008 R2 via WSUS

I stumbled across the fact that Microsoft released a hotfix rollup for Win7 and Server 2008 R2 that contains 90 hotfixes
http://support.microsoft.com/kb/2775511/en-us
The articled I linked above talks about after installing 2775511 (the big hotfix rollup containing 90 hotfixes) it is also necessary to install three more hotfixes:
After this update is installed, you must install update 2732673 to fix a regression issue in the Rdbss.sys file
After this update is installed, you must install update 2728738 to fix a regression issue in the Profsvc.dll file
After this update is installed, you must install update 2878378 re-released on November 11, 2013 to fix a regression issue in the Advapi32.dll file
I have imported all four of these hotfixes into my WSUS server. Do I need to install 277551 first and then install the other three or can all four be approved and go out at once? I guess I am hung up on the language of "After this update is installed
.... ". I want to put all 4 of these on our Win7 machines as well as my 40+ WinServer 2008 R2 machines

I read somewhere that over half of the updates included in Win7 SP1 and WinServer 2008 R2 SP1 were originally released as hotfixes. This means Microsoft made the decision that a large number of hotfixes would benefit every user of these two OSs
I think your conclusion is flawed. The only thing that you can draw from the presented statistic, is that Microsoft determined that a significant percentage of updates originally released as hotfixes warranted the additional investment in regression testing
to subsequently release those hotfixes as updates.
The fact that they bundled these 90 hotfixes together leads me to the same conclusion.
In fact, exactly the opposite conclusion applies: What you have in this package is all the rest of the stuff that didn't make that cut. What you have in this package are still NOT-regression tested hotfixes, they've just been bundled up for easy deployment
(and note that three of them got further broken in the process of bundling), causing yet three more hotfixes to have to be released.
In fact I read the MS Team Blog about this big hotfix release and they say the same thing, all users of these OSs would benefit from the installation of this hotfix rollup, not just a subset of users.
I suspect there are a notable number of patch administrators and systems administrators who would disagree with that self-serving promotion. If, in fact, it's true that "all users" would benefit, then the product team should have invested the effort in properly
regression testing those hotfixes, and releasing them as REAL updates. They did not; ergo the *actual* value is less than claimed.
Of course the bugaboo here is the fact that three other individual hotfixes need to be installed after the big hotfix rollup is installed.
Exactly! (And those are just the attempted fixes that broke something. Who knows how many other "fixes" may still result in newly discovered "broken stuff" that was never broken in the first place.)
The second part of this question should revolve around an itemized review of the hotfixes contained in this rollup with one simple question asked for each:
Have we actually *experienced* the issue addressed by this hotfix.
Where hotfixes are concerned one very simple but important rule applies:
If it ain't broken, don't try to fix it!
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

HT1311 I have done all of the above but when I try to update my Apps it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

I have done all of the above but when I try to update my Apps on my iphone it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

I keep getting the message your account is not valid for use in the US Store. You must switch to the Canadian store before purchasing. I have selected the Canadian store, but I still keep getting the same message.

I keep getting the message: Your account is not valid for use in the US Store. You must switch to the Canadian Store before purchasing. I have selected the Canadian store, but still keep getting the same message. Any suggestions?

Hi hi-liter,
Are you certain that you are signed onto iTunes & Apps in the Canadian store?
Settings>iTunes & App Stores, click on your AppleID, and then click on View AppleID. Type in your password, then click on Country/Region. Once there, follow the prompts and then select the Canadian Flag.
Hope that helps!
Cheers,
GB

My bank only uses 3.0 or 3.5 but it is no longer valid for firefox, will I still have some protection

my bank only uses FF 3.0 or 3.5 but it is no longer valid for firefox, will I still have some protection. When I upgraded the bank site failed to work and I even got a warning that it was not the right version for them.

You can use the free Pacifist and look inside the installer disks for your comptuer and transfer the Mail program back to your computer.
http://www.charlessoft.com/
You really need to update your operating system, likely some things have changed and the old Mail program might not work anymore correctly.
You can use the free MacTracker to find out what operating system your comptuer can handle, likely 10.5 if it's a PowerPC.
http://www.mactracker.ca/archive.html

Is my Adobe CC for photographers license still valid if I change from Windows 32 bit to 64 bit?

I've bought a license for Adobe CC for photographers (costs 10$ a month), and now going to upgrading my operating system from Windows 7 32 bit to 64 bit. I know that there is a 64 bit version for Photoshop, don't know about Bridge. So, is my license still valid if I upgrade, or do I have to buy a new CC program for photographers for the 64 bit version of Photoshop??
TIA

Good to know information :
You can install and activate Creative Cloud subscription Apps on 2 computers. (Either on Mac or Windows as per your choice) .
Either it may be 32 bit or 64 bit , it does not matters, the subscription will be counted based of number of activation done as per Machine ID's.
Before , you upgrade the computer to 64 bit, better to Sign out from Creative Cloud desktop application.
If the Machine ID changes just in case , it will be counted as 2'nd activation.
Sign in, Sign out | Creative Cloud desktop app
Even though, if you had exceeded Maximum activation limit(Already activated on 2 computers) , still you can reset the activation count to Zero, so that you can again activate CC subscription on any of 2 computers as per your choice.

HT3788 if i forget to register my apple care protection plan for my i phone,is there still valid to my phone to this extend warranty?

if i forget to register my apple care protection plan for my i phone,is there still valid to my phone to this extend warranty?

Call AppleCare & ask. If you bought such when you purchased the phone, it was automatically registered. You can check here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Is hotfix KB2275950 still valid for win7 sp1 64bit?

Similar Messages

Maybe you are looking for