Is HP G62(B31EE) can Hold up to 8GB+RAM?

Hello HP
I want to Upgrade my HP G62-b31EE's RAM from 2GB to 8GB? It is Possible?
Base on your Website.
It can Hold up to 4GB.
But I use the Crucial System Scanner.
Is say. It can Hold up to 8GB.
and the Last Question in my Mind, "What will Happen if I am Try to Use 8GB RAM?"
Thank You...
*Sorry For My English
This question was solved.
View Solution.

Hi:
There are some errors on both the service manual and the product specs page.
As you saw the product specs page states that the maximum memory is 4 GB.
That is incorrect.
Chapter 1, page 1 of the service manual, link below states the maximum memory is 8 GB.
However on page, 2, they only list memory configurations up to 2 x 2 GB.
That is incomplete.
You could also install a 4 GB + 2 GB chip for 6 GB and a 4 GB + 4 GB for 8 GB.
So, Crucial is correct and the service manual is correct--the service manual being incomplete.
http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf

Similar Messages

I have the macbook pro 13" retina display. Can I upgrade my 8gb ram to 16gb? my processor is 2.5Ghz intel core i5

i have the macbook pro 13" retina display. Can I upgrade my 8gb ram to 16gb? my processor is 2.5Ghz intel core i5

To save space on the computer, Apple has decided to solder the memory onto the logic board on the MacBook Pro with Retina display and the MacBook Air, and that's why you can't add more memory after buying the Mac. This only applies to these computers, not for the other ones

Can I install an 8Gb Ram Module on a 2010 Imac?

Acording to apple support iMac (Mid 2010): Memory specifications - Apple Support, "You can use RAM module sizes of 2 GB or 4 GB in each slot", but clearly is more cost efficient to be able to install an 8Gb and a 4Gb, as the iMac already comes with two 2Gb modules, the iMac only takes 4 cards and it has a max RAM memory capacity of 16Gb.
Can I install a 8Gb?
Thank you!

For the 21"
Maximum Memory
16 GB
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
For the 27"
Maximum Memory
32 GB (Core i5 or Core i7 Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

Can I install 1 8GB RAM module in my macbook pro 13???

Hi I am planning on upgrading my macbook pro 13's ram from 8 to 16GB by installing 2 seperate 8 GB modules by replacing the current 4GB ones.
I am gonna use these
Kingston 8GB 1600MHz DDR3 (PC3-12800) SODIMM Memory for Apple MacBook Pro (KTA-MB1600/8G)
amazon link
http://www.amazon.com/Kingston-1600MHz-PC3-12800-KTA-MB1600-8G/dp/B0089MTON0/ref =reg_hu-rd_add_1_dp

Two choices: What you initially wanted,
http://www.amazon.com/Corsair-8GB-DDR3-DRAM-1600MH/dp/B009W6TXTM
Or better yet:
http://www.amazon.com/Corsair-Certified-1600MHz-Laptop-CMSA16GX3M2A1600C11/dp/B0 09EH010E
Better hurry, flying off the shelves.....

Hi, I wanted to know whether the Mac notebook model g62-b31ee install or not? Thanks

Hi, I wanted to know whether the Mac notebook model g62-b31ee install or not?
Thanks

You can only install the Mac OS on Macintosh computers made by Apple.

Iphoto ver 8.1.2 unable to open iphoto. can hold down mouse button and 1 page of iphoto will open. click anywhere on screen and iphoto closes

Cannot open iPhoto. It's on the toolbar, but will not open. I can hold the mouse over the icon and hold the mouse button down and iPhoto will open to a thumbnail photo, but if I click anywhere on the page, iPhoto closes. iPhoto shows open on top of page, but practically all selectable items are gray.

It sounds like the window might have slipped down below the Dock or similar. Try change your screen resolution and (SystemPreferneces -> Displays) and that should force it back into reach. The return the resolution to whatever it was.

I just bought a 2gb shuffle and i have more music than it can hold in my itunes acct. How can i sync only the certain playlists on the shuffle?

I just bought a 2 gb shuffle and I have more music in my itunes than it can hold. How can i sync only the certain playlists on the shuffle?

Yes. Configure your Shuffle to sync only selected playlists from under its Music tab. This article should be able to assist you with this.
http://support.apple.com/kb/ht1719
B-rock

How to limit the number of items that a list control can hold?

Hi,
I am using a Flex3 List control for one of my projects.
I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
How to limit the number of items that a list control can hold / can be dropped in a list control ?
- Sen.

1. Listen for the dragdrop event on the control you are dragging onto.
2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
Regards,
Mark.

HOW DO I CHANGE THE AMOUNT OF TRACKS I CAN HOLD, i already knw how2 add em

i posted before on the same thing but i wasnt as clear, i wanna know how to change the amount of audio tracks i can hold, not how to add them, i know how to add more, just click create multiple in the track menu in the arrangement window. i cant hold more then 16 audio tracks cuz everyone after is blank with out the option to record. how do i change it so that i have more then 16 audio tracks, each with the option to record on them. please help!
p.s. gorge dude i didnt see any drivers window after preferences, lost am i ><

o nevermind, jorge was right, in the drivers window u can change this, i found it when : go to preferences, go to audio, look at the lil tabs under the bigger icons, right under the audio icon u see drivers, click it and u see the max number of tracks thingy, thanks alot dude

Is there any limit on how many records a cursor can hold?

Hi Everyone,
This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
Just wanted to know whether the huge data is the problem.
Thanks ....
Regards,
Amit

user13079404 wrote:
Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net.

What's the maximum size of data a coherence cluster can hold?

What's the maximum size of data a coherence cluster can hold before it starts noticing a degradation in performance?
Assume a partitioned topology is used with only one backup for each partition.

Hi,
Coherence partitioned cache is designed for linear scalability and it does it quite well. I don't see any reasons of performance degrations with increase in data size given, you have enough cores and memory for processing the requests and managing the data.
Cheers,
_NJ

What's the maximum size a varchar2 variable can hold for and NDS Stmnt?

What's the maximum size a varchar2 variable can hold for and NDS Statement? I read that NDS is good for doing EXECUTE IMMEDIATE on statements that aren't too big. The 10g PL/SQL manual recommends using DBMS_SQL for statements that are too large, but it never gave a limit for what too large was. Does anyone know offhand?

The limit is the same as the length of varchar2 variable within PL/SQL - that is varchar2(32767).It's not documented, but intermediate concatenation result can hold up to (64k-1) :
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
declare
part1 varchar2(32767) := rpad('begin null;', 32767);
part2 varchar2(32767) := lpad('end;', 32767);
begin
dbms_output.put_line(length(part1 || ' ' || /*' ' ||*/ part2));
execute immediate part1 || ' ' || part2;
end;
65535
PL/SQL procedure successfully completed.

How to create a structure which can hold a dynamic table as a field in DDIC

Hi ,
       I am designing a solution for a problem and have a unique requirement. I need to create a structure which can hold a field where dynamic table data can be stored. Let me illustrate with an example :
My structure ( say Z_output_struc ) will have the fields
Table_name Table_Data
My function module will have a table type of the above structure, so in effect ,my output can have multiple table names and related to each of them, there will be table data of that table name. The issue is how do I configure this in DDIC ?
I tried creating table_data as "Type ref to Data" but was stuck inside the func module when I tried to transfer data to this.
Any pointers as to how to think about this differently ?
Best Regards,
Girish

Hi Girish,
you start directly from the ref to data. You assign it to a field symbol and cast this to the type of the destination of your select. So you can directly add the reference to the cache:
I hope this example helps a bit (I took a form instead of a function module as it is easier to add here and used an hr table as kna1 is empty on my test system):
REPORT z_rwe_99_dyn_tab_cache.
* type definition
TYPES:
BEGIN OF _s_cache,
    table TYPE        tabname16,
    cache TYPE REF TO data,
END   OF _s_cache,
_t_cache TYPE STANDARD TABLE OF _s_cache.
* data declaration
DATA:
lv_table     TYPE tabname16,
lv_condition TYPE string,
lt_cache     TYPE _t_cache.
* define table and condition
lv_table     = 'HRP1000'.
lv_condition = 'plvar = ''01'' and otype = ''S'' and objid = ''50000016'''.
* get the result of a single table into the cache
PERFORM get_dyn_table USING
                        lv_table
                        lv_condition
                      CHANGING
                        lt_cache.
* form to read a single table
FORM get_dyn_table USING
                     iv_table     TYPE tabname16
                     iv_condition TYPE string
                   CHANGING
                     ct_cache     TYPE _t_cache.
FIELD-SYMBOLS:
    <lt_table> TYPE ANY TABLE.
DATA:
    ls_cache TYPE        _s_cache,
    lr_data TYPE REF TO data.
CREATE DATA lr_data TYPE STANDARD TABLE OF (iv_table).
ASSIGN lr_data->* TO <lt_table>.
SELECT * FROM (iv_table) INTO TABLE <lt_table>
    WHERE
      (iv_condition).
ls_cache-table = lv_table.
ls_cache-cache = lr_data.
APPEND ls_cache TO ct_cache.
ENDFORM.                    "get_dyn_table
If you have more questions just give another post.
Best Regards
Roman

User can hold PO for other document type except than the one in authorizati

Dear experts,
we set authorization activity * and PO doc type A only for a user, but end up user can hold PO for document type B . End up user cannot change or delete the particular PO.
what is the activity in authorization for user to hold so we can take out that activity..
pls advise

user has activity * and allow for PO document type A only.
But she can hold PO for document type B..
shall we remove the activity * from its profile , and if yes, what is the activity for hold PO in authorization?

Can we create a cursor that can hold records of any table

DECLARE
     CURSOR cr_tablenames IS
          SELECT tname
          FROM tab;
     v_tablename tab.tname%TYPE;
BEGIN
     OPEN cr_tablenames;
     LOOP
          FETCH cr_tablenames INTO v_tablename;
          EXIT WHEN cr_tablenames%NOTFOUND;
          DBMS_OUTPUT.PUT_LINE('Table: '||v_tablename);
          -- HERE, I WANT TO PERFORM SELECT * OPERATION ON
          -- EACH TABLE WHOSE NAME COMES INTO v_tablename
          -- AND DISPLAY THE RECORDS
     END LOOP;
END;
I want to perform SELECT * operation on each table whose name comes into the variable and display the records. How to achieve it? I am clueless.
Can this be achieved by something like... using cursors which can be defined dynamically and which can hold records of any table?
Or, do I need to have some different approach to this problem?
Edited by: kartins on Nov 5, 2009 11:41 PM

something like
SQL> create or replace
2 function getContent (p_tn in varchar2)
3     return sys_refcursor
4 is
5     retval sys_refcursor;
6 begin
7     open retval for
8       'select * from '||p_tn;
9     return retval;
10 end;
11 /
Function created.
SQL>
SQL> var rc refcursor
SQL>
SQL> begin
2     :rc := getContent ('emp');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL>
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        900                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1700        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1350        500         30
      7566 JONES      MANAGER         7839 02-APR-81       3075                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1350       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2950                    30
      7782 CLARK      MANAGER         7934 09-JUN-81       2551                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3100                    20
      7839 KING       PRESIDENT            17-NOV-81       5100                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1600          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1200                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81       1050                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3100                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1400                    10
14 rows selected.
SQL>
SQL> begin
2     :rc := getContent ('dual');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL>
SQL> print rc
D
X

Is HP G62(B31EE) can Hold up to 8GB+RAM?

Similar Messages

Maybe you are looking for