Is HP OfficeJet X585MFP able to be supported on HP DSS 4.25.42?
Hello Guys;
Can HP OfficeJet X585MFP is supported on HP DSS 4.25.42 version?
As some of the features are not able to sit correctly once configured on the said version.
Appreciate your help.
Thanks.
Hello Lynn,
Is your network router located near your desktop PC and L7590 officejet?
If so, I would suggest that you connect the L7590 to the router with an ethernet cable(you can also leave your usb cable connected to the desktop). Then you can connect more directly (still through the network) to the L7590 with your dv7 laptop instead of connecting through the desktop. Since your dv7 is wirelessly connected to the router, and the L7590 is also connected (wired) to the same router, the setup is much easier.
If you want to try this, first download the software from hp.com (click here for the download page). When you run the installation on your dv7 notebook you will be guided through the steps necessary for connecting to the printer via the network.
Dont forget to reply and let us know how it goes!
Kent G.
I work for Hewlett-Packard
Similar Messages
-
Does the HP Officejet 6500 E709n Series printer support eprint?
I really like the ability to ePrint using my new printer. I want to be able to set up other printer models at other locations. How do I know what printers support ePrint? I have one printer the HP Officejet 6500 E709. Does it suppoort ePrint?
Hi,
The Officejet 6500 Wireles (E709n_ do not support ePrint, only later models provide cloud capabilities.
You may found a complete list of ePrint supported printers in the following document:
http://support.hp.com/us-en/document/c03722645
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
HP Officejet Pro 8500 A910 softwre support
Hi,
Im having HP Officejet Pro 8500 A910. I am here to enquire whether the software can get a update or patches done ? or each specific printer comes with a specific software which cannot be updated
Thanking in advance
AnnaHi Anna,
When you install the software of the printer on to your PC the HP Update software also gets installed (Provided you have not excluded that option). And if the HP Update software is installed then it will automatically check for updates and patched periodically and inform you if there are any updates or patches available.
Thanks.
I work for HP. -
I have tried to connect my iPhone 4S/iPhone 4/4th gen iPod touch and none are supported. It states to contact Apple. Why does this occur since my software is up to date?
Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!
-
Officejet not able to connect with MAC wirelessly but will connect to W7 PC
I have a 6700 Office jet and have it setup to print wirelessly with a W7 PC. The Mac will not connect to the printer wirelessly but will print via usb connection. Any hints?
Hi jecp,
It sounds like the router is not broadcasting the Bonjour protocol. The Mac uses Bonjour and the Windows uses DHCP. You may need to contact the Internet Service Provider (IPS), but you can try the steps below, I have seen success with a simple reboot.
Leave the printer on and unplug the power cable
Shut down the Mac, Click the Apple Icon and select Shut Down
Leave the router on and unplug the power cable, do not press any buttons
After one full minute, plug the router back in and wait for the lights to illuminate again and stedily
Plug the printer back in and wait for the wireless light to become solid
Turn the computer back on
Now try to add the printer to the Print and Scan in System Preferences.
Please let me know if this resolves the issue. I am happy to provide additional assistance if necessary.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
and stil the same
I found this in another thread
H James
Re: Macbook pro freezes when itunes is opened
Dec 25, 2011 12:51 PM (in response to climbflyride)
Guys try this; it worked for me.
I recently bought MacBook Pro 15" & updated everything. All worked well till I started iTunes. The computer froze & I had to press the power button. This happenned again & again.
This is what I did & you too can try it. It's risk-free:
Go > Home > Music
Rename the folder "iTunes" to anything, e.g. "iTunes-old"
Start iTunes, it will work normally and will create a new folder "iTunes"
"iTunes-old" is still there. If you need something from it, take it, otherwise you may delete the folder.
Have fun.
Merry Christmas! -
Does the Officejet J3680 all-in-one support air print?
If so do I need an app?
This question was solved.
View Solution.Hi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01106836&tmp_task=prodinfoCategory&cc=us&dlc=en...
No and no app available to make it really working.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am aware that the HP OfficeJet G85 is no longer supported but are there any apps or anything that I can download that would make them compatible?
Hi,
Indeed the printer is not compatible but you may be able to find some workarounds:
For printing try the HPIJS print drivers, be sure to install any of the 3 required downloads prior following the printer set up instructions:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosxhpijs
For scanning try Vuescan which seems to support your printer:
http://www.hamrick.com/vuescan/hp_officejet_g85.html
Shlomi -
Looking for All on one with USB Flash Drive Print/Scan support
I am looking for an All in One Print/scan/copy. It should support print from USB Flash drive and scan to the same.
ThanksHi,
You may check the HP Officejet 6600/6700 models which support USB Flash drivers.
You may find the flash driver specifications listed within the Memory Device specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03058896&cc=us&dlc=en&lang=en&lc=en&product=505...
As well you may check the HP Officejet 8600 Series which supports both USB Flash Driver and Memory cards, its specifications can be located below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lang=en&lc=en&product=432...
Both of the products above provide Print, Scan, Copy and Fax functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Change the status of a Support Desk Message in Sol. Man.
Hello,
On the Solution manager system I have configured the service desk functionality. So end users are able to create support messages from the satellite systems as well on the solution manager system. For the confirmation of a proposed solution I want to use a workflow which asks the creator if the proposed solution is correct yes or no.
Is there a BAPI or function which change the status of the support desk message? If so how does this BAPI or function work. An example would be great.
Kind regards,
Richard Meijndecveloped the custom rfc
-
Error during application of scm 7.0 support pack
While applying support pack to our SCM 7.0 system (New Installation),
We encountered a SPAM error in xpra_execution phase, due to automatic
termination of job RDDEXECL scheduled by user id DDIC on client 000.
The details of the error are:
Message id: Brain
Message number : 366
Message type: A
Error: Error during SID assignment for characteristic 0REQUID (current
value 2)
We had a look at few notes mentioned by SAP support on 1319241. which
specifies a solution as
u201CIf you encounter the error message above, please run the Elementary
test - Compare Number Range and Maximum SID - for Master Data 0REQUID
in transaction RSRV. When it turns red, the error can be corrected by
pressing the "Correct Error" button.u201D
But we are already getting the light as green in the elementary test
for the Master Data 0REQUID in transaction RSRV, though we still
execute the same and problem is still the same i.e. RDDEXECL
program/job is getting terminated.
Regards
Edited by: pranav kumar on Feb 25, 2011 8:20 AMHi SM
Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
Regards
Pranav -
Officejet Pro L7780 shows constant paper jam, but no jam present.
I have been using this printer for the last 3 years, and except for some minor problems, it has been working fine, but in the last weeks it has shown "paperjam" over and over, and now it will not even allow any printing after startup.
It constantly shows the back of the machine, but there is nothing wrong there.
I have taken the paper out of the trays, blown out the open areas, checked the head travel, and taken the collator off the back, removed the bottom tray holder and bottom paper section, but nothing seems to make a difference, it keeps on giving the picture of the back detachable piece. (Note. finally got it working again, but would hate to shut the power off now)
I have even tried installing the latest firmware, and it did work well for a moment or two, but then it started back up again.
For the cost of this printer, I would hate to throw it away, and I will not buy an HP printer for this cost anymore, if they basically fail disastrously after 2 to 3 years. Any comments what sensors I should be looking at?
Or what would be the cost of having it checked out and repaired? (Note, I talked to HP, they suggested NO repair, and to purchase the Tech. Support pack for $37 for the year, or purchase an AIO 8500 for $399 minus $100 discount.)
The cost was about $299 ONLY three years ago!
Is there a way to figure out which sensor is the problem?
Note 1. Got it working, and it shows event 69556/69924 sequences, so it is probably still a firmware glitch.
It either shows Repeated False Paper Jam or Improper Power messages, so that might explain the sequences in the event log.
Note 2. I noticed the problem seems to be on startup, when I finally get it working, it seems to work fine, but when I shut the power down and start it back up, the problem re-appears. So it must be somewhere in the firmware on startup doing the checks having a problem, but once she gets going again, she is fine.
Operating system: Windows 7 Pro 64bit
Connected: via Network protocol (192.168.x.x)Hi @AdLive
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Officejet Pro X576dw Multifunction Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
HP Officejet Pro X576dw MFP Error Paper Jam but there is no Paper Jam
Can someone explain me how to reset my HP Officejet Pro D576DW MFP as it came out of the box?
The printer is repeating a paper jam message near the duplexer, but there is no paper jammed in the machine.Hi @AdLive
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Officejet Pro X576dw Multifunction Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
To help customers successfully use their products with Windows 8, HP has identified recommended drivers per product. Please visit the following support documents for more information:
HP LaserJet – Printers, MFPs, and All-in-Ones supported in Windows 8
HP Scanjet – Scanners supported in Windows 8
For HP Business Inkjet, Designjet, Deskjet, Officejet, Photosmart, PSC, or another supported product, go to Supported Printers for Windows 8.
HP understands that Microsoft has released a Windows 8 Release Preview version. HP is not currently supporting
any Windows Release Preview operating system versions. If you have any questions about the Windows 8 Release Preview,
please refer to the Microsoft’s web site at http://www.microsoft.com/.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solutionmikemalins,
To add - currently you may use your product on Windows 8 but a Full Feature Software Solution is not yet available
For USB connetion you may print and scan via Windowws Fax and Scan by adding the device from Devices and Printers.
For network connection you may print by adding the device from Devices and Printers.
If you have the RTM version you may also scan through the network by using the HP Scan and Capture app:
http://apps.microsoft.com/webpdp/en-us/app/hp-scan-and-capture/94fffdd0-bb3b-4adc-96ca-24c1d79e16c6
As mentioned by the document above, the full software solution expected to become available prior the public OS release (Oct 26th)
Regards.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Does elements 13 support raw files
?
Yes it does support raw files BUT if it supports your raw files depends on which camera created the raw files.
Here is the list of cameras supported
Camera Raw plug-in | Supported cameras
Tell us your make and model and we may be able to confirm support for that camera.
Brian
Maybe you are looking for
-
Needs a background webdynpro application running at the server side
Hi All, We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R
-
Fellow Forum Members, I'm using Acrobat Pro X and is it possible to insert a MP4 video within the PDF file? I do not want to reference to the MP4 video using a link to some external location. I want the video file embedded inside the PDF file withou
-
Hi. I just purchased a new iMac 24" and in the last week or so it has developed a buzz. The buzzing is strange because as far as I can tell, it is not associated with the brightness of the screen. It is also not a steady sound but one that comes and
-
Limit to number of files that can be moved or copied?
I'm trying to move the contents of the "previous systems" folder (from my update to Leopard) to an external harddrive, but when I drag and drop the file name it starts the process but stays at "preparing to copy 16,850 items." It's still on that mess
-
Any other suggestions?