Is Hyper-V available in Windows 8.1 ?

I am using a Sony Vaio i5-3337u laptop with windows 8.1 (neither pro nor enterprise) and want to run windows phone emulator. But it asks for enabling of Hyper-V feature and it is not listed in the Windows Features.How should I get the Hyper-V feature ??
My machine is SLAT capable and supports DEP.....Please help !!!

I don't know the answer to that, but I suspect not.  You might want to ask in the Windows Phone forum though.
http://social.technet.microsoft.com/Forums/en-US/home?category=WindowsPhoneITPro
Bob Comer Microsoft MVP -- Hyper-V

Similar Messages

  • [New Thinkpad Yoga 12 2015] enable Hyper-V feature on Windows 8.1 pro

    Hello,
    i am a french customer, and i am very interested in the New Thinkpad Yoga 12 2015, especially the version available with  Windows 8.1 Pro. and processor Intel Core i7-5500U.
    As an IT expert in Database technonlogies, i used to create virtual machines with the 'Hyper-V client' feature available in Windows 8.1 Pro. 
    - I saw that the Intel Core i7-5500U processor is compatible with the Intel VT-x and EPT virtualization technologies.
    - i saw that the Bios menu offers to enable/disable 2 virtualization parameters (link : http://download.lenovo.com/pccbbs/mobiles_pdf/yoga_12_ug_en.pdf)
    Do you know if the New Thinkpad Yoga 12 allows to enable the 'Hyper-V client' feature under Windows 8.1 Pro ?
    It is very important for me to have this information, because a computer without the 'Hyper-V client'  is not usefull for me
    So before buying this computer, i have to be sure that it will be able to enable the 'Hyper-V client'.  
    Thanks a lot for tour reply

    Good day.
    Please recall that this is a peer-2-peer support community. It's quite possible with the newness of the 2015 ThinkPad Yoga 12 (gen2), that no members with appropriate information have seen your post yet.
    From the Community Guidelines:
    "While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel."
    If you require official Lenovo support, you'll need to contact them directly. I've included the info below.
    Regards.
    France
    Produits gamme Think
    Français
    Support service & Garantie matériel 0810-631-213
    9:00 - 18:00 Lundi - Vendredi
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Installing Hyper-v manager on windows 7 home premium ?

    hello,
    Can i install hyper-v manager on windows 7 home premium ??
    Thanks

    No, to install the Hyper-V manager you need to install the RSAT tools (http://blogs.technet.com/b/schadinio/archive/2010/07/09/installing-hyper-v-manager-on-windows-7.aspx),
    and those are only available for Windows 7 Pro, Enterprise and Ultimate as mentioned here
    http://www.microsoft.com/en-us/download/details.aspx?id=7887

  • Hyper-V Gen 2 Windows Server 2012 R2 VM cannot define static IP address

    Hi,
    I have setup a physical server with Windows Server 2012 R2. It has only the Hyper-V role installed. The physical server has two NICs that I have teamed with Hyper-V port as the load balancer. I have created 1 VM on this Hyper-V server that is a
    Generation 2 VM running Windows Server 2012 R2. It has one NIC in the guest OS that is connected to the Hyper-V switch.
    Now the Guest OS works fine and network connectivity is great when using DHCP but when I configure a static IP address in the Guest OS all network connectivity is lost even with correct IP configuration. Is this something to do with a Gen 2 VM?
    A little more background - We have another Hyper-V server running Windows Server 2012 R2 with the same NIC teaming in the Host OS, on this Hyper-V there is a GEN 1 Windows Server 2012 R2 that has a static IP configured which is working normally.
    Any help is appreciated.

    I have resolved the issue. It appeared the hard IP phones were using the same IP range that I was attempting to use so of course the VM could not use the IP Address. Silly mistake.
    Elliot, I suggest you mark as Helpful and Answer any responses above that were helpful to you in getting this issue resolved. This is how the forums work.
    For example, if a response mentioned "VM generation has no effect on the vNIC." and that pointed you in the direction of troubleshooting networking instead of wasting your time looking into VM generations, that may be considered "Helpful"
    If a response mentioned "Make sure you're using valid IPv4 settings" and indeed you ended up having invalid IP settings such as a duplicate IP, this may be considered "Answer"
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

    Hi,
    I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
    I get the following errors in the eventlog.
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 18014
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>18014</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>411</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4248" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    </VmlEventLog>
    </UserData>
    </Event>
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 18012
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>18012</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>412</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4248" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    </VmlEventLog>
    </UserData>
    </Event>
    Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
    Source: Microsoft-Windows-Hyper-V-VMMS
    Date: 2013-11-28 10:46:58
    Event ID: 10150
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: HYPERV05.domain.local
    Description:
    Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>10150</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
    <EventRecordID>413</EventRecordID>
    <Correlation />
    <Execution ProcessID="2116" ThreadID="4280" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>HYPERV05.domain.local</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
    <VmName>SERVER01</VmName>
    <VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
    <Parameter0>%%2147943568</Parameter0>
    <Parameter1>0x80070490</Parameter1>
    </VmlEventLog>
    </UserData>
    </Event>
    What I have done to try to troubleshoot this issue is:
    Reinstalled DPM - No sucess
    Restarted the Hyper-v Host - No sucess
    I'm at the point where I am out of ideas and google hasn't given me much.
    /Joseph

    i have the same error.
    "vssadmin list writers" shows last error unknown for all writers
    disk space is sufficient
    ntbackup of systemdrive and systemstate runs fine.
    i installed KB940349 which fixes some vss related issues but the problem is still there.
    any ideas?
    Thanks.
    When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
    is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
    /Joseph

  • Merant Driver is not available for Windows 7 to create data warehouse table

    Hi All,
    I had installed Database, OBIA, DAC and Informatica in windows 7 64 bit. Installation is successful.
    To create data warehouse tables through DAC, we need merant driver. But Merant driver is not available in windows 64bit.
    I followed the below procedue to create a merant driver.
    "C:\Windows\SysWOW64\odbcad32.exe"
    Executed odbcad32.exe, and I found the merant driver in the list, when i try to create DSN, I am getting the following error.
    Specified Driver could not be loaded due to system error 193: (Oracle Merant Driver in DAC 10g_Oracle-OH1635326477, c:\orahome\10gR3_1\bifoundation\dac\utilities\DataDirectODBC\seor820.dll).
    Can any one please provide me the solution.
    Regards,
    Kumar

    I know the docs say you must use the merant driver however did you try a normal oracle odbc connnection. I am sure i did this in the past.
    BTW I hope this is just your laptop and you are playing around. I do'nt think Windows 7 is a supported environment. You should consider a supported platform for production and maybe a virtual machine on your windows 7 machine in development so you can practice the install.
    See
    Oracle Fusion Middleware Supported System Configurations
    http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
    System Requirements and Supported Platforms for Oracle Business Intelligence Applications 7.9.6.3 http://www.oracle.com/technetwork/middleware/bi/obia7963cert-matrix-395521.xls

  • Skype status is always available on windows, even ...

    skype status is always available on windows, even after logging out. how to fix that?

    Alright, so if you have tried the previous steps and it did not work, then let's try something else.
    Do you have another account? If so: Sign into the other account and add yourself. Sign back into your own account and add your other account. Sign off your main account and sign onto your other account and check your online status. If you are still online, you may have followed the previous step improperly or someone may have hijacked your account via the P2P version of Skype (which you should change your password right away so that the other user will be logged out.) 
    That being said, you can also have a friend or family member who has you on their contact list call you to determine if the account rings after you knowingly disconnected everywhere. If it rings, someone running under the older protocol of Skype may be utilising your account without your notice (or your account has been hijacked.) 
    If, in any situation, you choose to call your own account after you're knowingly offline and someone you do not know answers your call, do not attempt to acquaint with the hijacker or unknown person on your own as it may not be the best course of action to take for recovering your account. Do not interact with those you do not know and simply hang up right away if you do not feel comfortable speaking with the unknown person.
    So let me run down the steps for you:
    Check what others see of you. 
    If others still see you online and you followed the previous post completely and it still occurs, change your password immediately. Someone could be using Skype's older protocol to get into your account. Changing your password will sign them off.
    Should you choose to, you can have someone call the always available account and observe the response. If someone responds and you do not know them, do not attempt to get acquainted with them.
    Hopefully, this time around, this solution should help you. I know it sounds complex, but if you're saying you've tried absolutely everything else, then maybe getting creative should be pretty interesting enough to work.
    I.T. Professional
    Virtualisation Solutions (VCA-DCV - VMware)
    Donating time to help you here with your Skype needs.
    If I've answered your question, feel free to "Kudo" me!

  • Now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

    now there is no available of windows server 2008 R2 64bit download. so i want to know the equivelent product in server 2012?

    Hi,
    Windows 2008 R2 and Windows 2012 are not equivelent product, there are many new features in Windows 2012, and Windows Server 2008 R2 Evaluation (180 days)  still availabe:
    http://www.microsoft.com/en-us/download/details.aspx?id=11093
    Regards,
    Yan Li
    Yan Li
    TechNet Community Support

  • Is there a timeline for availability on Windows Phone of W10?

    The vision of Microsoft is to have one integrated OS for workstation and phone.
    As part of the technical preview of W10 we would like to plan the W10 phone trials.
    Is there a timeline for availability on Windows Phone of W10 operating system?
    appreciate your answer,
    regards,
    Frank

    You may follow Window Blog:
    http://blogs.windows.com/
    And all information and announcements will be posted there.
    If you are looking for Universal Apps (which they could run both in Windows and Windows Phone), take a look at:
    http://msdn.microsoft.com/en-us/library/windows/apps/dn609832.aspx

  • App available in Windows 8.1 store missing in Windows 10 Store

    I have couple apps in Windows 8.1 store. One of them is available in Windows 10 Store, the other one could not be found. Any ideas why that could be the case?

    Hi,
    In my opinion, it would be better to ask this question at Windows Store APP Dev forum for further assistance:
    https://social.msdn.microsoft.com/Forums/windowsapps/en-US/home?forum=windowsstore
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Export Available Important Windows updates to Excel File

    Hi,
    I want to export List of Important Windows updates available in Windows Updates to excel or csv file by using CMD. I don't have any WSUS server deployed. I want to do this by using CMD command. Anyone can help?
    Regards,
    Riaz Javed

    So you admit that it does not answer the question that was asked. Why is it marked as answer then?
    No, that's not what I said at all. It's marked as an answer because it
    is an answer. Just because it doesn't answer your question (even though you're attempting to hijack someone else's thread) doesn't make it not an answer.
    As I said half a year ago, start your own thread if you have questions.
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • Is there a 32 Bit edition available for windows server 2012 and windows server 2008

    Dear All,
    Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
    Regards,
    Ahmed

    Hi,
    Quote：
    All editions of Windows Server 2008 R2 are 64-bit only.
    Reference link below(session Supported upgrade paths):
    https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
    And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Adobe digital edition available in Windows 8 RT?

    when will adobe digital edition available in Windows 8 RT?

    Hi MartyrWorthy
    You can find the current system requirements listed at http://blogs.adobe.com/digitalpublishing/supported-devices.
    You may also want to reference Digital Editions Supported Devices - http://blogs.adobe.com/digitalpublishing/supported-devices for a list of supported devices and applications.

  • HT202577 Is the apple configurator available for Windows in order to push profiles to apple TVs?

    We currently have a windows environment at work and use 802.1x authentication and have some 1st generation apple TVs. We would like to get them on our wireless but are having issues. I would like to push profiles to these apple TVs to see if I can get them on but I am not going to buy a Mac to do it.
    Is the apple configurator available for Windows or even ubuntu?

    Hello,
    Thanks for using Apple Support Communities.
    Apple Configurator requires both Mac OS X, and the most up to date version of iTunes, and can only be installed from the Mac App Store.
    Mac App Store - Apple Configurator
    Cheers,
    Alex H.

  • Grid Control only 32-bit available for Windows

    Couple of questions I was hoping to get some help with. Client is a windows only shop. We're installing Windows 2008 R1 64-bit, but Grid Control is only available with 32-bit for Windows. This will definitely cause issues, is the only around it to either load 32-bit, or is there any other option. And when will 64-bit be available for Windows? Thanks in advance.

    Grid Control itself is a 32 bit application . It installs and works furpectly well on 64 bit Windows. I doubt we will ever see a 64-bit version of GC in the 10g series ... perhaps when they swap out OC4J with WLS and rebrand it as 11g they might put in a 64-bit version, but quite honestly there is little need for the 64-bit capability in the middle tier.
    However, the database part can, and should, be swapped out for a 64-bit database. Which is supported in the install method.
    I STRONGLY ENcourage the following sequence:
    1) Install 11gR1 database 64 bit, preferably patched to 11.1.0.7
    2) Install Grid Control 10.2.0.2.1 (note the .1) for Windows using the 'into an existing database' option
    3) Upgrade Grid Control to 10.2.0.5 (but that MAY require the 11.1.0.7 patch - check the README)
    I STRONGLY DIScourage using the 'create with new database' as it will take a whole lot longer, requires upgrading and/or patching the database anyway, and potentially leaves you with an obsolete DB to contend with in the long run.
    I also encourage skipping 10.2.0.4 if possible - it's more than a ruddy pain to patch to that one. I generally plan on 5-6 hours if I am forced to install a 10.2.0.4 GC from scratch, whereas the process I list above takes just over 2 hours to get to a 10.2.0.5

Maybe you are looking for